Upgrading 11gR1 to 11gR2

Hi
I am planning to upgrade my OIM11gR1 env to OIM11gR2. I am following the URL http://docs.oracle.com/cd/E27559_01/doc.1112/e28183/oim_up.htm#BABBJGCI.
In the section Running the Pre-Upgrade Report, the doc says to download the pending transaction report utility, as described in the note 1471905.1 at https://support.oracle.com.
But I could not find this metalink id in oracle support. How to get this?
Thanks

yes, the given id is not correct. but use advance seach and select all the category and search using "pending transaction report utility" word. may you will have that script

Similar Messages

How to upgrade 11gR1 to 11gR2?

Hi DBA's.
I need upgrade my database 11gR1 to 11gR2 with ASM. My SO is UBUNTU.
What is the note in metalink? or the procedure.
Thanks and regards.
Mariano

http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/toc.htm
metalink - Oracle 11gR2 Upgrade Companion [ID 785351.1]

Upgrade 11gr1 to 11gr2

Hi Gurus,
Will there be any issues if any database components are invalid after upgrade,if those componenets are not being used?will there be any problems for future upgrades?Can i fix the problems in upgrade version?
Please any suggestions/expert comments ....

822424 wrote:
Hi Gurus,
Will there be any issues if any database components are invalid after upgrade,if those componenets are not being used?will there be any problems for future upgrades?Can i fix the problems in upgrade version?
Please any suggestions/expert comments ....For peace of mind, I would always fix invalid database components prior to doing an upgrade.
I also find it easier to find resolutions to issues for 11.1 than 11.2, given 11.1 has been around a lot longer.

RAC upgrade from11gR1 to 11gR2

Could someone please give steps to upgrade 11gr1 to 11gr2 on linux

Did you try even a basic search before posting this request? In future, suggests doing that before turning to forums.
This being your first post, go to oracle 11gR2 home page and search for "How to Upgrade to Oracle Grid Infrastructure 11g Release 2" and pick the one for your OS
Cheers.

JMS Dequeue not working after upgrade from 11gR1 to 11gR2

Our database was migrated to a new database with new hardware running 11gR2
enqueue appears to be working as the queue table just grows and grows
However, my JMS async subscriber is never getting messaged.
Is there any logical reason for this?
in select * from all_queues my queue does show ENQUEUE and DEQUEUE enabled
also
the user that makes the subscription has DEQUEUE grant priviledge
Is there anything else that is needed for this to work?
I have already recreated the queue and queue table and ended up in the same place with no JMS consumer being able to consume.
when enabling trace on JMS I see
Caused by: oracle.jms.AQjmsException: JMS-122: Internal error Corrupted message
     at oracle.jms.AQjmsError.throwEx(AQjmsError.java:334)
     at oracle.jms.AQjmsUtil.getTextData(AQjmsUtil.java:718)
     at oracle.jms.AQjmsTextMessage.readGenMessageContainer(AQjmsTextMessage.java:322)
     at oracle.jms.AQjmsTextMessage.<init>(AQjmsTextMessage.java:172)
     at oracle.jms.AQjmsConsumer.dequeue(AQjmsConsumer.java:2481)
What incompatibilities exist b/w 11gR1 and 11gR2 ... my client is using aqapi 11.1
Edited by: steffi on Jan 14, 2013 3:14 PM

It's looking like it was a missing jar in this case the orai18n.jar
Is there any kind of release notes for how to move working AQ from 11gR1 to 11gR2?

11gR1 to 11gR2 grid

Hello
Suppose I have 11gR1 database with asm.
With regards to upgrading it to 11gR2 database with grid infrastructure,
I can follow the db upgrade steps for the database, but how about the asm ?
in 11gR2, asm suppose to be run under grid infrastructure.

Hi,
11gR2 asm is included in Grid infrastructure, to upgrade previous ASM you need to install Grid Infrastructure first, at the screen of installation it will detect your existing ASM and ask if you wanted to upgrade with installation or you can do it later
Cheers

Request help with upgrading 10gr2 to 11gr2(11.2.03) in EBS 11.5.10.2

EBS 11.5.10.2
Sue Linux 10 SP2
HRMS application
Database 10.2.0.4
I am planning on upgrading 10gr2 to 11gr2(11.2.03) in EBS 11.5.10.2.
I was going thru document 881505.1 under Veryfy software versions, it says autoconfig latest version with 9835302 patch.
In note 165195.1 using autoconfig to manage Configurations with oracle systems under patching autoconfig, says apply patch 9525311.
which one should be applying?
9835302 patch or 9525311?
Thanks.

I was going thru document 881505.1 under Veryfy software versions, it says autoconfig latest version with 9835302 patch.
In note 165195.1 using autoconfig to manage Configurations with oracle systems under patching autoconfig, says apply patch 9525311.
which one should be applying?
9835302 patch or 9525311?
The doc says "Also apply patch 9835302" in addition to AutoConfig patches, so you need to apply both -- (Patch 9835302 and Patch 9535311).
Thanks,
Hussein

Differences between Oracle Real Application Cluster 11gR1 and 11gR2

Hi Experts,
Please provide me differences between Oracle RAC 11gR1 and 11gR2.
Thanks in Advance,
Jeeshan.

Hi,
You can also refer below Oracle notes :
11gR2 Clusterware and Grid Home - What You Need to Know (Doc ID 1053147.1)
Important Changes to Oracle Database Patch Sets Starting With 11.2.0.2 (Doc ID 1189783.1)
Regards,
Neha

API differences between 11gR1 and 11gR2

Can anyone tell me if there are any api differences between oim 11gR1 and 11gR2 specifically. Also can we still use API's from oim 9.x in 11gR2.
Thanks

I think for lookup we can use tcLookupOperationsIntf API. You can refer old and new alternatives list here:
http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/apis.htm#BCFDDFAI
Though this list doesn't have tcLookupOperationsIntf.
regards,
GP

Differences between 11gr1 and 11gr2

Please can i be furnish with the differences between 11gr1 and 11gr2?
Thank you.

New Features Guide
http://docs.oracle.com/cd/E11882_01/server.112/e22487/toc.htm

SWITCHOVER_STATUS value are different for Oracle 11gR1 and 11gR2

Hi All,
I would like to know why is there a difference in the SQL output when run on a 11gR1 and 11gR2 Primary database in a DataGuard configuration.
On a 11gR1 Primary database
Open an SQL Session on the Primary database and run the SQL statement
SQL> select switchover_status from v$database;
To Standby
Now open a second SQL Session
Run the above SQL statement
SQL> select switchover_status from v$database;
Sessions Active
Now, when I do the same on a 11gR2 Primary database here is the result
On a 11gR2 Primary database
Open an SQL Session on the Primary database and run the SQL statement
SQL> select switchover_status from v$database;
To Standby
Now open a second SQL Session
Run the above SQL statement
SQL> select switchover_status from v$database;
To Standby
Is this a bug in 11gR2 ? Is there a patch/fix available ?
Oracle 11gR2 version 11.2.0.1.0
TIA,
Sudhir

Hello Loic,
The result on the Standby Database is "Not Allowed". This is because there is no alternative Standby Available.
I have some scripts which does the switchover based on the Database status. As per Oracle 11gR2 DataGuard Admin docs.
Cut pasted for Oracle DataGuard Admin docs.
Step 1 Verify that the primary database can be switched to the standby role.
SQL> SELECT SWITCHOVER_STATUS FROM V$DATABASE;
SWITCHOVER_STATUS
TO STANDBY
1 row selected
Note: The WITH SESSION SHUTDOWN clause can be omitted from
the switchover statement if the query performed in the previous step
returned a value of TO STANDBY.
When I use SQL statement "ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY;" and if there are Active SQL sessions then I get the error
ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY *
ORA-01093: ALTER DATABASE CLOSE only permitted with no sessions connected
Thanks,
Sudhir

To find sqlnet version in 11gR1 and 11gR2?

Hi,
How can I find out the versions of sqlnet of Oracle 11gR1 and 11gR2?
When I googled, I got some tips like using following scripts; select * from v$version;
But, this is not exactly what I am looking for...
I would like to find out what version of sqlnet is used...
Thanks in advance,
- SH

Another way is - $ORACLE_HOME/bin/lsnrctl version.
You get an output like this ->
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
TNS for Linux: Version 11.2.0.1.0 - Production
Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production,,
The command completed successfully

Upgrade Oracle database 11gR1 to 11gR2 in EBS R12

Hello all,
We are planning to upgrade our 12.1.3 ebs database 11gR1(11.1.0.7) to 11gR2. What are the broad level steps we need to follow. Or any document id is available? Please help

Oracle E-Business Suite 12.1.3 is available as a release update pack (RUP) which need to be applied on top of 12.1.x instance.
Oracle E-Business Suite Release 12.1.3 Now Available
http://blogs.oracle.com/stevenChan/2010/08/ebs_1213_available.html
. So do we not need to apply patch 9062910 for 12.1.3?What is the error?
Thanks,
Hussein

Owbsys.wb_rt_api_exec.open fails after upgrade to OWB 11gR2

The following code is used as a PLSQL wrapper to execute OWB mappings and is based on the good old run_my_own_stuff.sql. We have been mandated to use Tivoli as the corporate scheduler, meaning we do not have Workflow as a solution. We have implemented the audit_execution_id as an input parameter to all the mappings to be able to link the data to the OWBSYS audit tables, as well as return mapping performance and success info to the execution process/session. I have implemented this exact same procedure in 10gR1, 10gR2 and 11gR1 (current dev env) with no problems at all - the code ports easily. However following an upgrade (actually an export/import of the repository from 11gR1 on a 64bit solaris to 11gR2 on Exadata running enterprise linux 5) - actually the test server (I know, I know, I said the same thing!), the code now fails on the wb_rt_api_exec.open line (highlighted).
CREATE OR REPLACE PROCEDURE bi_ref_data.map (p_map_name IN VARCHAR2)
-- Procedure to execute ETL mapping package via command line call
-- Mapping names are held in the BI_REF_DATA.MAP_NAME table
-- with the mapping type and location data
AS
v_repos_owner VARCHAR2 (30) := <repository_owner>;
v_workspace_owner VARCHAR2 (30) := <workspace_owner>;
v_workspace_name VARCHAR2 (30) := <workspace_name>;
v_loc_name VARCHAR2 (30);
v_map_type VARCHAR2 (30);
v_map_name VARCHAR2 (30) := UPPER (p_map_name);
v_retval VARCHAR2 (255);
v_audit_execution_id NUMBER; -- Audit Execution Id
v_audit_result NUMBER;
v_start_time timestamp := LOCALTIMESTAMP;
v_end_time timestamp;
v_execution_time NUMBER;
v_record_rate NUMBER := 0;
v_records_selected NUMBER;
v_records_inserted NUMBER;
v_records_updated NUMBER;
v_records_deleted NUMBER;
v_records_merged NUMBER;
v_errors NUMBER;
v_failure VARCHAR2 (4000);
e_no_data_found_in_audit exception;
v_audit_exec_count NUMBER;
e_execution_id_error exception;
BEGIN
SELECT UPPER (loc_name), UPPER (map_type)
INTO v_loc_name, v_map_type
FROM bi_ref_data.owb_map_table
WHERE UPPER (map_name) = UPPER (v_map_name);
IF UPPER (v_map_type) = 'PLSQL'
THEN
v_map_type := 'PLSQL';
ELSIF UPPER (v_map_type) = 'SQL_LOADER'
THEN
v_map_type := 'SQLLoader';
ELSIF UPPER (v_map_type) = 'SAP'
THEN
v_map_type := 'SAP';
ELSIF UPPER (v_map_type) = 'DATA_AUDITOR'
THEN
v_map_type := 'DataAuditor';
ELSIF UPPER (v_map_type) = 'PROCESS'
THEN
v_map_type := 'ProcessFlow';
END IF;
-- Changed code for owb11gr2
-- owbsys.wb_workspace_management.set_workspace (v_workspace_name, v_workspace_owner);
owbsys.wb_rt_script_util.set_workspace (v_workspace_owner || '.' || v_workspace_name);
v_audit_execution_id := owbsys.wb_rt_api_exec.open (v_map_type, v_map_name, v_loc_name);
IF v_audit_execution_id IS NULL
OR v_audit_execution_id = 0
THEN
RAISE e_execution_id_error;
END IF;
v_retval := v_retval || 'audit_execution_id=' || TO_CHAR (v_audit_execution_id);
v_audit_result := owbsys.wb_rt_api_exec.execute (v_audit_execution_id);
IF v_audit_result = owbsys.wb_rt_api_exec.result_success
THEN
v_retval := v_retval || ' --> SUCCESS';
ELSIF v_audit_result = owbsys.wb_rt_api_exec.result_warning
THEN
v_retval := v_retval || ' --> WARNING';
ELSIF v_audit_result = owbsys.wb_rt_api_exec.result_failure
THEN
v_retval := v_retval || ' --> FAILURE';
ELSE
v_retval := v_retval || ' --> UNKNOWN';
END IF;
DBMS_OUTPUT.put_line (v_retval);
owbsys.wb_rt_api_exec.close (v_audit_execution_id);
v_end_time := LOCALTIMESTAMP;
v_execution_time := bi_ref_data.get_seconds_from_interval (v_end_time - v_start_time);
v_retval := 'Execution time = ' ||
v_execution_time ||
' seconds.';
DBMS_OUTPUT.put_line (v_retval);
SELECT COUNT (w.rta_select)
INTO v_audit_exec_count
FROM owbsys.owb$wb_rt_audit w
WHERE w.rte_id = v_audit_execution_id;
IF v_audit_exec_count = 0
THEN
RAISE e_no_data_found_in_audit;
END IF;
SELECT w.rta_select,
w.rta_insert,
w.rta_update,
w.rta_delete,
w.rta_merge,
rta_errors
INTO v_records_selected,
v_records_inserted,
v_records_updated,
v_records_deleted,
v_records_merged,
v_errors
FROM owbsys.owb$wb_rt_audit w
WHERE w.rte_id = v_audit_execution_id;
v_retval := v_records_selected || ' records selected';
DBMS_OUTPUT.put_line (v_retval);
IF v_records_inserted > 0
THEN
v_retval := v_records_inserted || ' inserted';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF v_records_updated > 0
THEN
v_retval := v_records_updated || ' updated';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF v_records_deleted > 0
THEN
v_retval := v_records_deleted || ' deleted';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF v_records_merged > 0
THEN
v_retval := v_records_merged || ' merged';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF v_errors > 0
THEN
v_retval := v_errors || ' errors';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF v_execution_time > 0
THEN
v_record_rate := TRUNC ( (v_records_inserted + v_records_updated + v_records_deleted + v_records_merged) / v_execution_time, 2);
v_retval := v_record_rate || ' records/sec';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF (v_audit_result = owbsys.wb_rt_api_exec.result_failure
OR v_audit_result = owbsys.wb_rt_api_exec.result_warning)
THEN
FOR cursor_error
IN (SELECT DISTINCT aml.plain_text
FROM owbsys.owb$wb_rt_audit_messages am
INNER JOIN
owbsys.owb$wb_rt_audit_message_lines aml
ON am.audit_message_id = aml.audit_message_id
WHERE am.audit_execution_id = v_audit_execution_id)
LOOP
DBMS_OUTPUT.put_line (cursor_error.plain_text);
END LOOP;
END IF;
-- OWBSYS.wb_rt_api_exec.close (v_audit_execution_id);
COMMIT;
EXCEPTION
WHEN e_execution_id_error
THEN
raise_application_error (-20011, 'Invalid execution ID returned from OWB');
-- RAISE;
WHEN e_no_data_found_in_audit
THEN
raise_application_error (-20010, 'No data found in audit table for execution_id - ' || v_audit_execution_id);
-- RAISE;
WHEN NO_DATA_FOUND
THEN
raise_application_error (-20001, 'Error in reading data from OWBSYS tables.');
-- RAISE;
END;
Does anyone out there know if there is a difference between 11gR1 and R2 in the way that the wb_rt_api_exec function works?
Is there a simple way to retrieve the audit_id before executing the mapping, or at a push during the mapping so that we can maintain the link between the session data and the OWBSYS audit data?
Martin

Hi David, I have been reading some of your posts and blogs around OWB and I still have not found the answer.
OK, thereis/was a script that Oracle Support/forums/OTN sent out a while ago called "run_my_iowb_stuff" - I am sure you will be familiar with it. I based the code I uploaded on it and added additional functionality. In essence, I wanted to use the audit_id as an input parameter tot he mapping, so that I can register the audit_id in the management tables, and associate each row of loaded data with a specific mapping_id which would allow a simple link to the owbsys audit tables to complete the audit circle. To that end, I used the owbsys.wb_rt_api_exec.open procedure to register the mapping execution, and then on the execute procedure of the same package, I passed this audit_id in as a custom parameter:
<<snip>>
owbsys.wb_workspace_management.set_workspace (v_workspace_name, v_workspace_owner);
v_audit_execution_id := owbsys.wb_rt_api_exec.open (v_map_type, v_map_name, v_loc_name, 'PLSQL');
IF v_audit_execution_id IS NULL
OR v_audit_execution_id = 0
THEN
RAISE e_execution_id_error;
END IF;
v_retval := v_retval || 'audit_execution_id=' || TO_CHAR (v_audit_execution_id);
IF v_include_mapping_id > 0 -- if non-zero, submit owb execution id as an input parameter to the map process
THEN
owbsys.wb_rt_api_exec.override_input_parameter (
v_audit_execution_id,
'p_execution_id',
TO_CHAR (v_audit_execution_id),
owbsys.wb_rt_api_exec.parameter_kind_custom
END IF;
<<snip>>
The execution is closed, also by the use of the audit_id ( "owbsys.wb_rt_api_exec.close (v_audit_execution_id)" )
I can also use the audit_id to inspect the audit tables to retrieve the records processed as well as any associated error messages, and format them for the calling application (owSQL*Plus, which is normally the context of our current use).
This procedure has been working weel up to now until we moved over to 11gR2 when all of a sudden the audit_id is not returned when executing "v_audit_execution_id := owbsys.wb_rt_api_exec.open (v_map_type, v_map_name, v_loc_name);". Prior to 11gR2 this worked like a charm - now it has crashed to a halt.
As an interesting twist, I have tried to substitute a sequence number for the audit_id, and then tried to get the audit_id after the mapping completes, so that I can put both the sequence and audit id in a table so it maintains the link. However in attempting to use the owbsys.wb_rt_script_util.run_task procedure which now appears to be the only thing left working, I was astonished to see the following output in sqlplus:
SQL> exec map1('stg_brand')
Stage 1: Decoding Parameters
| location_name=STAGE_MOD
| task_type=PLSQLMAP
| task_name=STG_BRAND
Stage 2: Opening Task
| l_audit_execution_id=2135
Stage 3: Overriding Parameters
Stage 4: Executing Task
| l_audit_result=1 (SUCCESS)
Stage 5: Closing Task
Stage 6: Processing Result
| exit=1
--> SUCCESS
Execution time = .647362 seconds.
records/sec
PL/SQL procedure successfully completed.
SQL>
This output seems so identical to the "run_my_owb_stuff" that either Oracle support generated their "run_my_owb_stuff" as a lightweight owbsys.wb_rt_script_util.run_task procedure, or Oracle incorporated the "run_my_owb_stuff" script into their owbsys.wb_rt_script_util.run_task procedure! Which way round I cannot say, but it is surely one or the other! To make matters worse, I have raised this with Oracle Support, and they have the temerity to claim that they do not support the "run_my_owb_stuff" script, but think enough of it to incorporate it into their own package in a production release!
To overcome my problems, in the short term, I need to be able to access the audit_id either during or after the execution of the mapping, so that I can at least associate that with a sequence number I am having to pass in as a parameter to each mapping. In the longer term, i would like a solution to be able to access the audit_id before I execute the mapping, as I could by calling the "owbsys.wb_rt_api_exec.open " procedure. Ideally this would be solved first and I would not need to use a sequence at all.
Hope this clarifies things a bit.
Regards
Martin

Stream Configuration between different 11gr1 and 11gr2

I have oracle downstream set-up between two DBs both are 11gr1, i want to upgrade my my target DB to 11gr2. I want to ask whether my streams set-up would work after this or not.
OR
Is it possible have streaming between two version of oracle.
I shall be V thankful for you guidance.

Hi,
Yes it possible to have streams configured between 2 different versions.
Anand

Upgrading 11gR1 to 11gR2

Similar Messages

Maybe you are looking for