Upgrading from 11.5.9.2 to 12.0.4, Legal entity not migrated

Hi,
Upgrading from 11.5.9.2 to 12.0.4, Legal entity not migrated, due to this issue unable to process any accounting transaction, In the GMA_MIGRATION_LOG contain the below message.
TABLE_NAME     LINE_NO     RUN_ID     MESSAGE_TOKEN     M_TYPE     PARAM1     PARAM2
GL_SUBR_STA     144,378.00     1,393.00     GMA_MIGRATION_ERROR_ABSTRACT     E     GL_SUBR_STA     Legal Entities
GL_SUBR_STA     144,379.00     1,393.00     GMA_MIGRATION_ERROR_ABSTRACT     E     GL_SUBR_STA     Cost Types
GL_SUBR_STA     144,380.00     1,393.00     GMA_MIGRATION_ERROR_ABSTRACT     E     GL_SUBR_STA     Previous Cost Types
GL_SUBR_STA     144,381.00     1,393.00     GMA_MIGRATION_ERROR_ABSTRACT     E     GL_SUBR_STA     Current Cost Types
GL_SUBR_STA     144,382.00     1,393.00     GMA_MIGRATION_ERROR_ABSTRACT     E     GL_SUBR_STA     Previous Periods
GL_SUBR_STA     144,383.00     1,393.00     GMA_MIGRATION_ERROR_ABSTRACT     E     GL_SUBR_STA     Current Periods
GL_SUBR_STA     144,355.00     1,392.00     GMA_MIGRATION_TABLE_STARTED     P     GL_SUBR_STA     NULL
GL_SUBR_STA     144,356.00     1,392.00     GMA_TABLE_MIGRATION_TABLE_FAIL     P     NULL     NULL

Hi,
Please refer to your other thread.
GRE/Legal Entity not migrated in R12
Re: GRE/Legal Entity not migrated in R12
Regards,
Hussein

Similar Messages

I upgraded from an iPhone 3 to a 4S. My calander will not transfer to the new phone. What do I need to do?

I upgraded from an iPhone 3 to a 4S. My calander will not transfer to the new phone. What do I need to do?

I'm not sure what made the difference, but I tried again and it worked this time. ???????????

I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions

I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions

Hello there, Bromers87.
It seems that you're having issues with activation of both of these features on your new iPhone 5s. The following Knowledge Base article offers some pointers with issues activating them on your iPhone:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
If it seems that activation has gone through ok, then the following two articles offer in-depth troubleshooting for each application:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
and
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Since upgrade from Exchange 2007 to Exchange 2013 the conversations in Outlook do not group by subject

Hi Microsoft,
Since we have upgraded from Exchange 2007 to 2013 users complain their conversations in Outlook are no longer grouped based on the subject of an e-mail. I looks like Outlook uses other message properties for grouping e-mails in a conversation.
I have investigated all the forum topics and see that with exchange 2010 there is support added for the use of conversation-ID's. However the functionality to automatically group e-mails with the same subject in one conversation in Outlook is gone!
I would like to know if there is a fix to implement so that some our users get this functionality back. For Example: Let the exchange server not generate conversation-ID's and message-ID's for certain users.
Your help is greatly appreciated!

Totally correct!
If you don't plan to maintain Outlook then you plan to fail :(
Additional links etc are in here:
http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Upgrading from Illustrator 10: CS2 or CS3? (CS4 and CS5 do not run on my Mac)

Provided I'm able to find a legitimate copy of the upgrade version from a reputable source, which one is the highest Mac version that one can upgrade from Illustrator 10? CS2 or CS3? Higher versions won't run on my PPC Mac anyway.
I'm asking now because I just finished upgrading my ancient Acrobat Standard 5.x to Acrobat Professional 8 for under $29, shipped. It turned out to be a sealed, unopened box, and I've registered it with Adobe already and collected the registration incentive received from Adobe (11 hours of training at lynda.com).
Any input will be much appreciated.
Thanks in advance.
Wo Tai Lao Le
我太老了

CS4 requires OS10.4.11 or newer.
Basically, you can go all the way to CS4 or anything short of that. Without moving past the PPC chip and OS10.4.11.
Since CS4 will work, CS3 will certainly work. I believe CS3 required OS 10.4.8 or newer. Checking my disk.... yup 10.4.8 or newer. I would simply look for whatever you can find, short of CS5. That itself may sort out what you can purchase.
Actually thinking upgrades.. you're right. Only 3 versions. So for "upgrade" you're limited to CS3 from Ai10. CS3 will run great on a PPC with 10.4.11. I'd search for that if possible. I wouldn't settle for CS2.

Post upgrade from 11.5.10.2 to 12.1.3 Forms are not opening

Hi,
After upgrade from 11.5.10.2 to 12.1.3, When we click on any of the form link, forms are not opening.
No error detected in $LOG_HOME/logs/ora/10.1.3/j2ee/ folder.
Please help as we are stuck here.
Regards,
Shrikant

Shrikant P Y wrote:
Hi,
We are using Linux X86 server for front end and UP-UX for database.
There were no issues during upgrade.
Source and target both are same.
When we click on any forms instead of form launcher servlet system is using /dev60cgi/f60cgi. Checked the profile value and it is form/servlet.
Do you meet the minimum requirements as per (Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1])?
please check apache log files?
What is the browser you use and the client OS?
Can you reproduce the issue from other clients and/or using different browser?
Did AutoConfig complete successfully?
Do you have all the application services up and running?
Please check the application.log file for details about the error.
Running a Trace on a Form [ID 148143.1]
what do you see when you enable java console trace?
:) ApPsMasti ;)
sharing is caring

In Upgraded from 4.6c to ECC 6.0 Cust.Movement type is not availablein MIGO

Hi Experts,
We have done SAP upgrade from SAP 4.6c to ECC 6.0.
There is a costomized Movement type Z01 and Z02 for goods issue to cost centre in 4.6c and working fine.
Now after upgrade those movement types Z01 and Z02 are not appearing for selecting in MIGO transaction.
Please suggest me what are the check points I have to cross verify or is there any note has to be apply
Your fast responce is more valuable.
Thanks
Reshma

Check OSS Note 700015 - MIGO: Customer-specific movement types cannot be used
Regards

Upgraded from 17.0.9esr to 24.0esr, now all downloads are not visible at all anywhere

I just upgraded from 17.0.9esr to 24.0esr. At first I noticed that download statusbar didn't show any downloads when they were downloading, so I decided to remove it. That didn't change anything as I cannot see them in Tools->Downloads tab. I tried messing with the browser.download.useJSTransfer and browser.download.useToolkitUI, as I have seen in my search, but they do not help. I also tried changing the private browsing mode options, and although I can see that downloads fail, I cannot see when they are downloading. I'm not sure what is going on.

Ok, I did what you said, I clicked the download button that opened the about:downloads tab, I opened the Library.Downloads, I went to sourceforge to download something, or I can go anywhere, but in the about:downloads tab it always says "There are no downloads." even tho I can see that there is a file.zip.part on my filesystem and I can see that something is downloading using my internet monitor. Interestingly the download never completes properly as there is always a .part file. There is also nothing displayed in Library.Downloads.
Well, I guess I will try resetting all the settings, even tho it wasn't what I wanted to do, because I have to configure a lot of stuff after that to get to the way I want. I will post if this fixes it or if I can identify exactly the cause.

Recently upgraded from Windows 7 to 10. Now EOS Utility app does not work.

Recently upgraded from Windows 7 to 10. Tried downloading photos from my 5D Mark II, but EOS Utility app does not work to Select Images to Download, unlike before. But when I disconnected my External Hard Drive, EOS Utility app main window works normally. I need the external hard drive connected all the time. How can I fix this problem, please? Thanks.

This sounds like a hardware problem with your computer. A USB port puts out a certain amount of power and can be used to power external devices... such as hard drives. But the camera does not use any USB power -- it runs on the power from the internal battery. It only uses the data pins to communicate. But you are describing a situation in which having one device connected a to a USB port prevents a different USB port from working. That can happen if the device in one port is drawing too much power (it can prevent other ports from working correctly.) Did you have this problem when using Windows 7?

Upgraded from 10.2.8 to 10.3 now Epson CX6600 will not work

Ok fellas (and ladies) here is the story. My mother finally got around to upgrading from 10.2.x to 10.3.0 (now, via online upgrades, 10.3.9 I believe, but the current problem stems from the initial upgrade) only this last week. When she upgraded, she was no longer able to print to her Epson CX6600. It was still present, so to speak, but her iMac (G4)would never connect (just that beautiful pinwheel). Now i am just a new convert to Mac so I have no idea how to fix this. We tried using the uninstall program provided by Epson's install program. When we did this, and then subsequently installed again, it told us everything was still installed. Furthermore, when we went to add the printer back into the printer setup utility, OS X recognized the printer but said the drivers were not present.
The next thing we did was download the latest drivers. Would you believe the Printer Setup Utility still said no drivers present?
So does anyone have any ideas? My mother called Epson, they say its Apple's problem (nice fellows over there at Epson). Before I suggest to my mother to plop down the $49 American to talk to someone on the phone about this, I thought I would get the scoop from the real experts.
Thank you in advance for any time you put into this.
Cheers
iMac G5 (iSight) Mac OS X (10.4.6) 1 gig RAM, 250 gig harddrive

Hi Again MnchstrCityBlues!
At this point, the best I can do, is give you instructions, on how to uninstall & reinstall the printer. I know you have already done that, but perhaps you may have missed a file or two.
I have an Epson C86, so some of the instructions may need to be modified for the CX6600.
Change my references to C86 to CX6600.
But the procedure should be the same.
*Download the most current driver from www.epson.com.
* Before moving the folder & files listed below, to a "Temporary Epson Trash Folder", open "Printer Setup Utility" and delete the C86.
* "Quit' "Printer Setup Utility"
* Move the files (Posted in Capitals) to the "Temporary Epson Trash Folder" on the Desktop
HD > Applications >
EPSON PRINTER UTILITY (Alias)
HD > Users > Your Home > Library > Preferences >
COM.EPSON.IJPRINTER.UTILITY.PLIST
COM.APPLE.PRINT.CUSTOMPRESETS.PLIST
COM.APPLE.PRINT.PRINTCENTER.PLIST
COM.APPLE.PRINT.PRINTERPROXY.INTERNAL_MODEM.PLIST
COM.APPLE.PRINT.PRINTINGPREFS.PLIST
HD > Library > Printers >
EPSON (Folder) Only move this folder if you have no other
Epson products
I also had a "OS X booklet.pdf" (Epson) that I had saved in my "Documents" folder. You will get a new one. After the installation, I replaced it. You may not have saved your original one. It's no big deal, there's really not much in it, In fact I don't remember ever opening it, before today!
* Quit ALL running Applications
* "Repair Permissions" using "Disk Utility" in the "Utilities" folder
* Dig out your Epson C86 "Start Here" instruction quick sheet, for reference
* Unplug the USB cable from the Mac & then the C86
* Re-attach the USB cable to the C86 & then the Mac
* Turn on your C86
* Double click on: "epson11518.sea.hqx" to unzip (This is the downloaded driver)
* Double click on: "epson11518.sea" to expand
* Follow the prompts & instructions
* When the "Vise" installer opens in a window, double click it to start the install
* When the installation is complete, turn off the printer & restart your Mac.
* "Repair Permisions" again
* Turn on the C86
* Open "Printer Setup Utility"
* "You have no printers available" will appear. Click "Add"
* Select "Epson USB" in the contextual menu
* Click on "Stylus C86" to highlight
* Add "Page Setup:" select "All", from the contextual menu
* Click "Add"
* Quit "Printer Setup Utility"
The images below, that are left on the "Desktop", can be trashed, unless you prefer to keep the installer.
epson11518.sea.hqx
epson11518.sea
C86Series_1.8bAs.dmg
You should be good to go!
Good Luck!
ali b

Database upgrade from 7.5 to 7.6.0.12 - AK Catalog information not found:00

I just upgraded a database to 7.6.0.12. The catalog of the upgraded database is corrupt for one user. When I try to view the triggers defined for the user I get this message :
General error;-9205 POS(1) System error: AK Catalog information not found:0000000000000000007200
SELECT * FROM "DOMAIN"."TRIGGERS"
All other entities, tables, sequences, procs appear to be valid. Another user's entities are all present and correct, including triggers.
How can I repair the catalog to allow me to recreate the missing triggers?

Hi again Joe,
with the help of the vtrace you provided, we found out the TABID of the involved table: 0x000000000000051E
We now need to find out which table it is:
SELECT SCHEMANAME, TABLENAME FROM TABLES WHERE TABLEID = x'000000000000051E'
After finding out the relevant table, there are two options:
1. delete the triggers for this table
or
2. copy the table in a new table, delete the old table and rename the new table to the old table:
CREATE TABLE <schema>.<new_table> AS SELECT * FROM <schema>.<old_table>
DROP TABLE <schema>.<old_table>
RENAME TABLE <schema>.<new_table> TO <schema>.<old_table>
This all (point 1 AND 2) should preferably be done within a transaction, so it can be rollbacked, should anything go wrong.
Please note that in point 2 that all given privileges, defined views and indexes no longer apply or exist, these have to be regiven/recreated.
It might thus be a good idea to check if there are views defined using the table <schema>.<old_table> BEFORE following the steps of point 2.
Regards,
Roland

I have lost my itunes on the latest upgrade from itunes, i've tryed to uninstall everything apple that did not work.

i have lost my itunes when installing the new upgrade,it says i have to install msvcr80.dll. i tryed to uninstall everything apple but that didn't work , they won't uninstall. i'm not very computer savy, i only use itunes for my ipod and play some games

Hello confused86,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

Error upgrading from 11.1.1.3 to 11.1.1.5 - bimiddleware not deployed

I got the following issue after upgrade to 11.1.1.5
####<May 21, 2011 12:33:01 PM ART> <Error> <Deployer> <wuhan.ar.most> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <df6f0ceab78a2168:1a65b590:130132fbc47:-8000-0000000000000003> <1305991981512> <BEA-149231> <Unable to set the activation state to true for the application 'bimiddleware [Version=11.1.1]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "LocationSvcPort" failed to preload on startup in Web application: "analytics/actions".
java.lang.SecurityException: WSM-06303 : The method "registerListener" was not called with required permission "oracle.wsm.policyaccess"
I already run bi-upgrade.py, that supposly will update my system-jazn-data.xml

May be your location credentials out of sync.
Un-register and re-register the locations
1)Right click the location in the Control Center manager and select Unregister
2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

WINDOWS UPGRADE FROM V8 TO V8.1 ONLY THE EDIT PORTION WILL OPEN NOT THE ORGANIZER

Uninstalled PSE12 and reinstalled it over 15 times. Win8.1. Had system checked out by Dell. Adobe live support in non-existent. Editor works fine but no reference to the Organizer, not even on the shortcut.. I Even tried the trial version. Everything was working since Sept 2013 then stopped about 4 weeks ago or so. In Jan 2014 upgraded win8 to win8.1 . Where is tech support login function? Will not buy PSE13 till PSE12 works..

So are you saying you don't have an Organizer icon in the Editor or that when you click it nothing happens?
This is on Windows 8.1 Update 1:

Delta not working after upgrade from 3.5 to BI7.0

Hello All,
We have recently upgraded from BW3.5 to BI7.0 and the standard delta is not working now after the upgade. The name of the Extractor is 0CRM_SALES_ACT_1.
Did anyone come across this problem before or can anyone suggest the solution.
Thanks
Madhu

Hi Madhu,
I've experienced a similar problem with this extractor. I attempted to Initialize Delta with Data Transfer to no avail. The job ran for 12+ hours and stayed in "yellow" status (0 records extracted). The following steps worked for me:
1. Initialize Delta without Data Transfer
2. Run Delta Update
3. Run Full Update and Indicate Request as Repair Request
Worked like a champ, data load finished in less than 2 minutes.
Hopefully this will help.
Regards.
Jason

Upgrading from 11.5.9.2 to 12.0.4, Legal entity not migrated

Similar Messages

Maybe you are looking for