Upgrading Physical standby database

Hi Gurus,
we are having Data Guard setup in 9.2.0.6 with 5 databases in windows 2000 now we are planning to upgrade it to 10.2.0.4 can you please give me ur valuable suggestions or best possible ways to upgrade these database.
kk

When all else fails, Read The Fine Manual
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm
IIRC, first you need to upgrade to either V9.2.0.7 or V9.2.0.8 which will be documented in manual above

Similar Messages

Upgrade PHYSICAL STANDBY database to 10g from 9i

Hello everybody,
Please can you provide me the details for Manual upgrading 9i STANDBY database to 10g. Any special parameters that we have to set on the Primary database..
Any sites with the information available would be great.
Thanks everybody for your help.

There is no in-place upgrade process to move from 9i to 10g. You have to upgrade your primary and then reinstantiate your standby (using Oracle10g). You may like to keep your 9i standby in tact until your upgrade of 9i primary to 10g is completely successful.....just to ensure that you have a fast, easy and reliable fall-back plan.
Thanks
Chandra

Upgrading the primary and physical standby database

Solaris 9
oracle 9i (9.2.0.8)
upgrade to 10g (10.2.0.3)
Hi,
I would like to know how to upgrade database in dataguard envronment.(primary and remote physical standby database)
Is rolling upgrade possible in this case?
Or any steps or Document is appreciated.
Thanks.
Message was edited by:
user539835

Read this Metalink Note:407040.1

Upgrading with a physical standby database in place

Hi all
I am planning to upgrade my database which is 11.2.0.1 (Windows 32 platform) to 11.2.0.3. It has a primary standby database. I only have 1 server for testing the primary database, so I am looking for some help.
I was reading http://docs.oracle.com/cd/B28359_01/server.111/b28294/upgrades.htm#CHDBJAGG and I confuse about step 4 and 5
+4. Install the new release of the Oracle software into a new Oracle home on the physical standby database system, as described in the Oracle Database Upgrade Guide.+
+5. Mount the physical standby database.+
My question is in step 5, when I mount the physical standby database, does it mounted using new Oracle binary or still using the old version? From my understanding what is step 4 doing is to copying files to new home only. Changing the service to use the new oracle binary is done by dbua. I know this when I test upgrading the primary database.
Regards
Stanley.

Hello;
new Oracle binary or the new Oracle home if you will.
So you install the new software on the standby only, all the upgrade SQL gets done on the Primary and then you ENABLE and startup mount on the new oracle home and the standby gets upgraded from the Primary redo.
Its pretty simple ( My exact plan )
1. Disable log shipping from the Primary
2. Shutdown Standby
3. Install 11.2.0.3 on Standby - Just the software
4. Startup Standby in recovery mode - do NOT run r any SQL at the standby
5. Shutdown Primary
6. Install 11.2.0.3 on Primary
7. Run Upgrade SQL or DBUA at Primary
8. Re-enable log shipping
9. Monitor the redo apply from Primary to Standby - this will also upgrade the Standby data dictionary
Make sure your tnsnames and listener files move to the new Oracle home and edit as needed.
Another oracle note is 278641.1
Best Regards
mseberg
Edited by: mseberg on Jan 29, 2013 8:21 PM

Can i convert logical standby database to physical standby database

Dear All,
Can i convert a logical standby database to physical standby database?
If yes, what are the steps to follow?
Thanks
Mahipal

I never needed or tested something like this, but below maybe usefull -
Transient Logical Standby
Users can convert a physical standby to a transient logical standby database to effect a rolling database upgrade, and then revert the standby to its original state as a physical standby database once the upgrade is complete - using the KEEP IDENTITY clause. This benefits physical standby users who wish to execute a rolling database upgrade without investing in redundant storage otherwise needed to create a logical standby database.
http://www.oracle.com/technology/deploy/availability/htdocs/DataGuardOverview.html
But opposite is documented - http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ls.htm#BEIGJCAC
best regards.

Physical standby database fail-over

Hi,
I am working on Oracle 10.2.0.3 on Solaris SPARC 64-bit.
I have a Dataguard configuration with a single Physical standby database that uses real time application. We had a major application upgrade yesterday and before the start of upgrade, we cancelled the media recovery and disabled the log_archive_dest_n so that it doesn't ship the archive logs to standby site. We left the dataguard configuration in this mode incase of a rollback.
Primary:
alter system set log_archive_dest_state_2='DEFER';
alter system switch logfile;
Standby:
alter database recover managed standby database cancel;Due to application upgrade induced problems we had to failover to the physical standby, which was not in sync with primary from yesterday. I used the following method to fail-over since i do not want to apply any redo from yesterday.
Standby:
alter database activate physical standby database;
alter database open;
shutdown immediate;
startupSo, after this step, the database was a stand alone database, which doesn't have any standby databases yet (but it still has log_archive_config parameter set and log_archive_dest_n parameters set but i have 'DEFER' the log_archive_dest_n pointing to the old primary). I have even changed the "archive log deletion policy to NONE"
RMAN> configure archivelog deletion policy to none;After the fail-over was completed, the log sequence started from Sequence 1. We cleared the FRA to make space for the new archive logs and started off a FULL database backup (backup incremental level 0 database plus archivelog delete input). The backup succeded but we got these alerts in the backup log that RMAN cannot delete the archivelogs.
RMAN-08137: WARNING: archive log not deleted as it is still neededMy question here is
1) Even though i have disabled the log_archive_dest_n parameters, why is RMAN not able to delete the archivelogs after backup when there is no standby database for this failed-over database?
2) Are all the old backups marked unusable after a fail-over is performed?
FYI... flashback database was not used in this case as it did not server our purpose.
Any information or documentation links would be greatly appreciated.
Thanks,
Harris.

Thanks for the reply.
The FINISH FORCE works in some cases but if there is an archive gap (though it didn't report in our case), it might not work some times (DOCID: 846087.1). So, we followed the Switch-over & Fail-Over best practices where it mentioned about this "ACTIVE PHYSICAL STANDBY" for a fail-over if you intend not to apply any archivelogs. The process we followed is the Right one.
Anyhow, we got the issue resolved. Below is the resolution path.
1) Even though if you DEFER the LOG_ARCHIVE_DEST_STATE_N parameter's on the primary, there are some situations where the Primary database in a dataguard configuration where it will not delete the archive logs due to some SCN issues. This issue may or may not arise in all fail-over scenarios. If it does, then do the following checks
Follow DOCID: 803635.1, which talks about a PLSQL procedure to check for problematic SCN's in a dataguard configuration even though the physical standby databases are no available (i.e., if the dataguard parameters are set, log_archive_config, log_archive_dest_n='SERVICE=..." still set and even though corresponding LOG_ARCHIVE_DEST_STATE_N parameters are DEFERRED).
If this procedure returns any rows, then the primary database is not able to delete the archivelogs because it is still thinking there is a standby database and trying to save the archive logs because of the SCN conflict.
So, the best thing to do is, remove the DG related parameters from the spfile (log_archive_config, log_archive_dest_n parameters).
After i made these changes, i ran a test backup using "backup archivelog all delete input", the archive logs got deleted after backup without any issues.
Thanks,
Harris.
Edited by: user11971589 on Nov 18, 2010 2:55 PM

How to apply Oracle patch when physical standby database in place

Dear All,
I want to apply Oracle patchset 8 on 10.2.0.5 when physical standby database in place. What are the steps for Primary site and for standby site.
Thanks in advance
Kamran Laeeq

Hi Kamran,
You will not upgrade or patch the standby database by importing offline redologs. On the contrary, there is a procedure to do this. Please note that you will not transitiate the role from standby to primary or startup the database. You will just startup the database by executing "startup mount" and "startup upgrade", during the upgrade. It means that you will not change database role standby to primary and you will be able to continue to the log shipment after the respective upgrade.
But, it is very important that you should stop the log shipment and apply all the offline redologs, before the upgrade. Technically, you can import offline redologs after the upgrade, by changing "compatibility" parameter in oracle, but regarding to my experiences it may cause some problems after you transitiate the role from standby to primary.
In short;
In order to stop log shipment, at the primary site;
alter system set log_archive_dest_state_2=defer;
In order to import all the offline redologs without a delay, at the standby site;
alter database recover managed standby database cancel;
alter database recover managed standby database nodelay disconnect from session;
I hope that I clarified the issue,
Best regards,
Orkun Gedik

Oracle 10 upgrade - Primary & standby database

Hi Expert,
I need some information on your project experience. We're currently planning a oracle 10 upgrade. Have a few question:
1. We're planning to upgrade the primary database first and a week later the standby database. Will the archive log which is sent from primary to standby database will still work? Will the recovery still work?
2. Is this the right patch to go 10.2.0.4? I'm currently on 4.7 ext 2
3. Will there be a performance issue known of oracle 10 running on 32-bit machine, since it has the limitation of the memory (3G). Do I need to set AWE option on windows?
Thanks in advance.

Hello Sean,
please let me go more in detail with some of your comments.
> I actually posted my experience with doing a rolling upgrade of a PHYSICAL standby database.
This statement is wrong. You can't do a rolling upgrade with a physical standby database. You have to convert the database to a logical standby database .. and then you can perform a rolling upgrade. But if you have done the conversion, it is not a physical anymore.
This is also described and mentioned in this white paper:
http://www.oracle.com/technology/deploy/availability/pdf/maa_wp_10gr2_rollingupgradebestpractices.pdf
Data Guard SQL Apply (logical standby database) is required in order to perform a database rolling upgrade. You can also do a rolling upgrade when starting with a physical standby by temporarily converting the physical standby to a logical standby. If starting with 11g, see the Rolling Database Upgrades for Physical Standby Databases using Transient Logical Standby 11g paper for details on doing a rolling upgrade when starting with a physical standby. If starting with 10g, see MetaLink note 300479.1.
> It WILL work, and is fairly straight forward.
In this point you are almost correct, because of a standard SAP system is not using the unsupported data types, etc. (afaik)
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/data_support.htm
To be honest if a sap basis admin asks such a question, i would not recommend to perform an unsupported way, because i am in doubt about his dataguard know how.
Regards
Stefan

Error while creating physical standby database using Oracle Grid 10.2.0.5

Hi All,
I am setting up data guard using oracle grid.
Primary database version: - 10.2.0.4
Standby database version: - 10.2.0.4
Primary OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
Standby OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
I am creating physical standby database using EM. But it is getting failed with error message in sqlnet.ora file
Fatal NI connect error 12533, connecting to:
(DESCRIPTION=(ADDRESS_LIST=)(CONNECT_DATA=(SERVICE_NAME=INPRDSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=indb50.oii.com)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 10.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 17-AUG-2010 02:40:07
Tracing not turned on.
Tns error struct:
    ns main err code: 12533
    TNS-12533: TNS:illegal ADDRESS parameters
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0As we can see, address_list is empty.
Can anyone suggest what could be the reason behind this?

Dear user13295317,
Here is the error explanation;
Oracle Error :: TNS-12533
TNS:illegal ADDRESS parameters
Cause
An illegal set of protocol adapter parameters was specified.
In some cases, this error is returned when a connection cannot be made to the protocol transport.
Action
Verify that the destination can be reached using the specified protocol.
Check the parameters within the ADDRESS section of TNSNAMES.ORA.
Legal ADDRESS parameter formats may be found in the Oracle operating system specific documentation for your platform.
Protocols that resolve names at the transport layer (such as DECnet object names) are vulnerable to this error if not properly configured or names are misspelled.Hope That Helps.
Ogan

SQL exception during creation of a physical standby database with EM

Version: EM Oracle 10.2.5 (agents running, repository running, primary db running, all targets visible and reachable with EM)
I try to create a physical standby database with the enterprise manager and each time the process is aborted with a SQL exception during the preparation of the job by the EM. I have added a part of the OMs log containing the error at the end of the excerpt.
=============
2010-04-29 16:00:39,856 [EMUI_16_00_39_/console/targets] WARN pref.SubtabPref getFolders.710 - Unknown folder id: VirtualServers retrieved from repository
2010-04-29 16:01:04,765 [EMUI_16_01_04_/console/database/dataguard/create] ERROR em.dataguard validate.1329 - CreateBean: ClassNotFoundException: null
2010-04-29 16:02:05,476 [EMUI_16_02_05_/console/database/dataguard/create] ERROR jobs.dbclone checkSetFileError.79 - DatabaseFileAttributes.checkSetFileError(): Null database file!
2010-04-29 16:02:05,476 [EMUI_16_02_05_/console/database/dataguard/create] ERROR jobs.dbclone setControlfiles.160 - DatabaseFileAttributes.setDatafiles(): Invalid control file!
2010-04-29 16:02:05,492 [EMUI_16_02_05_/console/database/dataguard/create] ERROR jobs.dbclone getControlFileNames.616 - DatabaseFileAttributes.getDatafileNames(): null datafile names!
2010-04-29 16:02:32,823 [Thread-28] ERROR em.jobs remoteOp.2389 - DBVerify.remoteOp(): Error: max_stamp# 6071384
2010-04-29 16:02:32,823 [Thread-28] ERROR jobs.dbclone submitJobPreparation.3297 - DBCloneObject.submitJobPreparation(): getMaxLogSequenceNum: Während der Vorbereitung des Jobs ist eine SQL Exception aufgetreten. Um das Problem zu diagnostizieren, legen Sie das Agent Perl-Skript-Tracing auf DEBUG fest und wiederholen den Vorgang
2010-04-29 16:02:32,823 [Thread-28] ERROR jobs.dbclone submitJobPreparation.3501 - DBCloneObject.submitJobPreparation(): Exception: java.lang.Exception: Während der Vorbereitung des Jobs ist eine SQL Exception aufgetreten. Um das Problem zu diagnostizieren, legen Sie das Agent Perl-Skript-Tracing auf DEBUG fest und wiederholen den Vorgang
2010-04-29 16:02:32,823 [Thread-28] ERROR jobs.dbclone submitDBCloneJob.3716 - DBCloneObject.submitDBCloneJob(): Exception: Während der Vorbereitung des Jobs ist eine SQL Exception aufgetreten. Um das Problem zu diagnostizieren, legen Sie das Agent Perl-Skript-Tracing auf DEBUG fest und wiederholen den Vorgang
2010-04-29 16:02:37,496 [EMUI_16_02_37_/console/database/dataguard/create] ERROR em.dataguard onEvent.1243 - CreateConfigController: Exception: oracle.sysman.db.dg.util.VxxStandbyException: Während der Vorbereitung des Jobs ist eine SQL Exception aufgetreten. Um das Problem zu diagnostizieren, legen Sie das Agent Perl-Skript-Tracing auf DEBUG fest und wiederholen den Vorgang
=========
I have set the agent perl script tracing to DEBUG, but can't find any reason, why the job preparation failed.
Has anyone an idea why the job cannot be prepared? Thanks in advance for investigation :-)

Can you please tell me how can i see data gaurd on EM..
I have oracle 11gR1..i have implemmented primary as well standby database..
I have already started EM but i have no idea where to find datagaurd option..or how to create standdby db using EM..
You got error that means u did it using EM..how can i do it on EM

Problem in recover physical standby database(Data Guard) by rman

Hello to all
I have created a physical standby database ,I want make backup of it by rman and when I lose it's datafile I can restore it ,making backup and restore is fine but in recovery I encounter some problem
scenarios is follow
1- In rman I create a backup of standby database by this command:
backup database plus archivelog delete all input;
2- I run this comman in rman for recover standby database
run{
2> set until scn 1392701;
3> restore database;
4> recover database;
5> }
(1392701 is extracted from this query "SELECT MAX(NEXT_CHANGE#)+1 UNTIL_SCN FROM V$LOG_HISTORY LH,
V$DATABASE DB WHERE LH.RESETLOGS_CHANGE#=DB.RESETLOGS_CHANGE# AND LH.RESETLOGS_TIME =
DB.RESETLOGS_TIME;" "http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rman.htm")
but RMAN result is like this:
executing command: SET until clause
Starting restore at 13-DEC-08
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from
backup set
restoring datafile 00001 to /u01/app/oracle/oradata/sari/system01.dbf
restoring datafile 00002 to /u01/app/oracle/oradata/sari/undotbs01.dbf
restoring datafile 00003 to /u01/app/oracle/oradata/sari/sysaux01.dbf
restoring datafile 00004 to /u01/app/oracle/oradata/sari/users01.dbf
restoring datafile 00005 to /u01/app/oracle/oradata/sari/example01.dbf
restoring datafile 00006 to /u01/app/oracle/oradata/sari/users02.dbf
channel ORA_DISK_1: reading from backup piece /home/oracle/backup/0ek24dt4_1_1
channel ORA_DISK_1: restored backup piece 1
piece handle=/home/oracle/backup/0ek24dt4_1_1
tag=TAG20081213T042506
channel ORA_DISK_1: restore complete, elapsed time: 00:01:07
Finished restore at 13-DEC-08
Starting recover at 13-DEC-08
using channel ORA_DISK_1
starting media recovery
archive log thread 1 sequence 116 is already on disk as file /u01/app/oracle/oradata/archive/1_116_666786084.arc
archive log thread 1 sequence 117 is already on disk as file /u01/app/oracle/oradata/archive/1_117_666786084.arc
archive log filename=/u01/app/oracle/oradata/archive/1_116_666786084.arc thread=1 sequence=116
archive log filename=/u01/app/oracle/oradata/archive/1_117_666786084.arc thread=1 sequence=117
unable to find archive log
archive log thread=1 sequence=118
RMAN-03002: failure of recover command at 12/13/2008 05:14:13
RMAN-06054: media recovery requesting unknown log: thread 1
seq 118 lowscn 1392700
3- then I decline 1392701 to 1392700 and i run this command
run{
2> set until scn 1392700;
3> restore database ;
4> recover database;
5> }
executing command: SET until clause
Starting restore at 13-DEC-08
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from
backup set
restoring datafile 00001 to /u01/app/oracle/oradata/sari/system01.dbf
restoring datafile 00002 to /u01/app/oracle/oradata/sari/undotbs01.dbf
restoring datafile 00003 to /u01/app/oracle/oradata/sari/sysaux01.dbf
restoring datafile 00004 to /u01/app/oracle/oradata/sari/users01.dbf
restoring datafile 00005 to /u01/app/oracle/oradata/sari/example01.dbf
restoring datafile 00006 to /u01/app/oracle/oradata/sari/users02.dbf
channel ORA_DISK_1: reading from backup piece /home/oracle/backup/0ek24dt4_1_1
channel ORA_DISK_1: restored backup piece 1
piece handle=/home/oracle/backup/0ek24dt4_1_1 tag=TAG20081213T042506
channel ORA_DISK_1: restore complete, elapsed time: 00:01:08
Finished restore at 13-DEC-08
Starting recover at 13-DEC-08
using channel ORA_DISK_1
starting media recovery
archive log thread 1 sequence 116 is already on disk as
file /u01/app/oracle/oradata/archive/1_116_666786084.arc
archive log thread 1 sequence 117 is already on disk as
file /u01/app/oracle/oradata/archive/1_117_666786084.arc
archive log filename=/u01/app/oracle/oradata/archive/1_116_666786084.arc thread=1
sequence=116archive log
filename=/u01/app/oracle/oradata/archive/1_117_666786084.arc
thread=1 sequence=117Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS
would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/app/oracle/oradata/sari/system01.dbf'
media recovery complete, elapsed time: 00:00:10
Finished recover at 13-DEC-08
4- if I run
run{
restore database;
recover database;
I will recieve that error of step 2 (RMAN-06054: media recovery requesting unknown log: thread 1
seq 118 lowscn 1392700)
5- if I just restore the database and I don't perform recovery by rman and I restart redo apply all thing seem fine
but in opening database I'll recieve ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/app/oracle/oradata/sari/system01.dbf' error)
do you know what is problem
thanks
Edited by: ARKH on Dec 12, 2008 11:06 PM

hi
I myself have found the solution , when I recover the standby database
it do recovery but at the end of recovery it raise the error(RMAN-06054: media recovery requesting unknown log: thread 1
seq 118 lowscn 1392700) but if I begain redo apply before open the database
and I wait till all redo apply process start and communication between the
standby database and the primary database start, then I can
open the standby database and no error will raise
but if befor restarting redo apply I open the database I'll recieve the
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/app/oracle/oradata/sari/system01.dbf' error
thanks

Problem creating physical Standby database with RMAN

Hi All
I am trying to learn oracle dataguard and as part of the process learning creating standby database.
Platform : Sun-Fire-V250 Sparc, Solaris 10
Database Version - Oracle 11R2
I am creating standby database on same server, so directory structure is different.
Following the instructions on Oracle site I managed to create a functional physical standby database. But I am not able to create standby database using RMAN. These are the steps that I followed-
1.Set up all necessary parameters on primary database as done while creating physical standby database manually, eg setting force logging, creating standby logs etc.
2.Edited parameter file on primary database as done while creating manual pysical standby database creation. Some of the changes done are-
On Primary Database:
*.FAL_CLIENT='orcl11020' #Primary database unique name
*.FAL_SERVER='stdby_11' #Standby database unique name
db_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020'
log_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11/redo_mem','/<dir>/oradata/orcl11020/redo_mem'
standby_file_management=auto
*.log_archive_config='DG_CONFIG=(orcl11020,stdby_11)'
*.log_archive_dest_1='LOCATION=/<dir>/flash_recovery_area/ORCL11020/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orcl11020'
*.log_archive_dest_2='SERVICE=stdby_11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stdby_11'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
Copied same pfile for standby database and modified following-
*.control_files='/<dir>/oradata/stdby_11/stdby_11.ctl','/<dir>/fra_stdby/stdby_11/stdby_11.ctl'
*.db_name='orcl1102'
*.db_unique_name='stdby_11'
*.FAL_CLIENT='stdby_11'
*.FAL_SERVER='orcl11020'
db_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11'
log_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020/redo_mem','/<dir>/oradata/stdby_11/redo_mem'
standby_file_management=auto
*.log_archive_dest_1='LOCATION=/<dir>/fra_stdby/STDBY_11/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby_11'
*.log_archive_dest_2='SERVICE=orcl11020 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
db_unique_name=orcl11020'
3. Add relevant information in tnsnames.ora and listener.ora files and then restart listener.
3. Created password file with same credential as primary database.
4.Up-to-date RMAN backup of primary database available.
5.Create standby controlfile with rman
While primary database s open (I tried with primary database in mount mode as well)-
$>rman catalog rman/paswd@rman target /
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY;
6. Open a new terminal and startup standby database in nomount mode using parameter file created -
$>ORACLE_SID=stdby_11
$>export ORACLE_SID
$>sqlplus / as sysdba
SQL>STARTUP NOMOUNT pfile='<location/initfilename.ora'
SQL>quit
$> rman AUXILIARY / target sys/passwd@orcl11020 catalog rman/passwd@rman
RMAN>DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER;
RMAN finishes without error but archive logs are not being tranported. Looking at the log, following caught my eye-
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
FAL[client, ARC2]: Error 16191 connecting to orcl11020 for fetching gap sequence
Errors in file /<>dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
Errors in file /<dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
So on both primary and standby I confirmed
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
To make double sure that password files are same, I shutdown both databases, delete password files and recreated with same credentials.
Password files are called - orapworcl11020 and orapwstdby_11
Can someone guide me where thisngs are going wrong here please.

Not sure if I understood it clearly.
SELECT * FROM V$ARCHIVE_GAP;
returns no rows so there is no gap.
But could you please explain me the result of the previous query. To catch up again, on standby when I check
SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
SEQUENCE# APPLIED
75 NO
74 NO
76 NO
77 NO
I understand that though archive files have been copied across but they are not applied yet.
On primary when I give your query -
SELECT name as STANDBY,SEQUENCE#,applied, completion_time
2 FROM v$archived_log
3 where dest_id=2
4 and sequence# BETWEEN 74 and 80;
I get -
STANDBY SEQUENCE# APPLIED COMPLETIO
stdby_11 74 YES 28-JUN-11
stdby_11 75 YES 28-JUN-11
stdby_11 76 YES 29-JUN-11
stdby_11 77 YES 29-JUN-11
stdby_11 78 YES 29-JUN-11
stdby_11 79 YES 29-JUN-11
stdby_11 80 YES 29-JUN-11
stdby_11 75 NO 07-JUL-11
stdby_11 74 NO 07-JUL-11
stdby_11 76 NO 07-JUL-11
stdby_11 77 NO 07-JUL-11
stdby_11 78 NO 07-JUL-11
I have intentionally given
sequence# BETWEEN 74 and 80
because I know in the current incarnaion of the database, max sequence is 78.
So my understanding is, the rows between 28-29 June are from previous incarnation, correct me if I am wrong
Archive files of the current incarnation, since I successfully created standby database are shipped but yet to be applied - am I right?
Then my final question is, when will these archives be applied to standby database?
I am sorry to ask too many questions but I am just trying to understand how it all works.
Thanks for your help again

Create ONLINE logfile in physical standby database

We have created a physical standby database with rman duplicate command on a remote server
"duplicate target database for standby dorecover nofilenamecheck"
When I see the standby server...Online logfiles are not created however its relevant entries are there in V$LOG and V$LOGFILE views.
I guess it is the default behaviour of duplicate command in RMAN and we can not specify LOGFILE clause when we create standby database.
Now the problem is we could not drop the online logfile on standby database since it's status is "CURRENT", "ACTIVE".
Since the ONLINE LOGFILE are not actually created , "ALTER DATABASE CLEAR LOGFILE GROUP " command returns with error as it could not find the file in the server.
So How we can drop the current/active online logfile and add new ones in standby db?

I'm assuming you have physical standby. Here are step I did in the past.
1) create a backup control file
2) bring the database back using the "recreate control file" it the trace file BUT you need to remove or comment out the line that has the corrupt or missing redo log file. And don't forget to add the tempfile after you recreate the controlfile
example:
alter database backup controlfile to trace;
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "ORCL" NORESETLOGS FORCE LOGGING ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 '/oracledata/orcl/redo01.log' SIZE 200M,
GROUP 2 '/oracledata/orcl/redo02.log' SIZE 200M,
GROUP 3 '/oracledata/orcl/redo03.log' SIZE 200M,
# GROUP 3 '/oracledata/orcl/redo03.log' SIZE 200M
-- STANDBY LOGFILE
-- GROUP 10 '/oracledata/orcl/redostdby04.log' SIZE 200M,
-- GROUP 11 '/oracledata/orcl/redostdby05.log' SIZE 200M
DATAFILE
'/oracledata/orcl/system01.dbf',
'/oracledata/orcl/undotbs01.dbf',
'/oracledata/orcl/sysaux01.dbf',
'/oracledata/orcl/users01.dbf'
CHARACTER SET WE8ISO8859P1
If you just want to add the standby redo log then using this command.
alter database add standby logfile
'/<your_path>/redostdby01.log' size 200M reuse,

How to create 11.2.0.2 physical standby database from 2 node RAC (11.2.0.2)

Hi,
Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
DB : 11.2.0.2
OS : RHEL5
RMAN duplicate is causing problem with network and we decided to go for manual creation of the same.
Thanks in Advance..

Hi;
Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
DB : 11.2.0.2
OS : RHEL5I had similar issue, what i did
1. Used source oracle_home on standby server
2. Created new asm instance and use same naming
3. I took RMAN full backup on source and move it to target
4. I edit initora file remove RAC setting and restore db(also edited listener file)
Regard
Helios

Issue on physical standby database

Hi
I've a problem on standby database.
I recently added a datafile on primary database, then I scp'ed the data file to physical standby database.On physical standby database I tried performing recovery.
I get following message in my alert log
WARNING! Recovering data file 88 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
ORA-279 signalled during: ALTER DATABASE RECOVER standby database ...
how can I fix this now.
We keep physical standby database 2 day behind, and apply logs manually.
Physical standby database is maintained manually.
Could someone help me in getting out of this problem.
Oracle 9.2.0.7
solaris

Versus keeping it in manual mode, you can specify a time "delay" for the application of the logs:
From http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_apply.htm#i1022811
6.2.2 Specifying a Time Delay for the Application of Archived Redo Log Files
In some cases, you may want to create a time lag between the time when redo data is received from the primary site and when it is applied to the standby database. You can specify a time interval (in minutes) to protect against the application of corrupted or erroneous data to the standby database. When you set a DELAY interval, it does not delay the transport of the redo data to the standby database. Instead, the time lag you specify begins when the redo data is completely archived at the standby destination.
Note:
If you define a delay for a destination that has real-time apply enabled, the delay is ignored.
Specifying a Time Delay
You can set a time delay on primary and standby databases using the DELAY=minutes attribute of the LOG_ARCHIVE_DEST_n initialization parameter to delay applying archived redo log files to the standby database. By default, there is no time delay. If you specify the DELAY attribute without specifying a value, then the default delay interval is 30 minutes.
Canceling a Time Delay
You can cancel a specified delay interval as follows:
For physical standby databases, use the NODELAY keyword of the RECOVER MANAGED STANDBY DATABASE clause:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE NODELAY;
For logical standby databases, specify the following SQL statement:
SQL> ALTER DATABASE START LOGICAL STANDBY APPLY NODELAY;
These commands result in log apply services immediately beginning to apply archived redo log files to the standby database, before the time interval expires. Also, see:
Section 12.8, "Using a Physical Standby Database with a Time Lag"
Oracle Database SQL Reference for the DELAY attribute of the ALTER DATABASE RECOVER MANAGED STANDBY DATABASE statement

Upgrading Physical standby database

Similar Messages

Maybe you are looking for