Upgrading the from 10.2.8 to 10.4.6 (tiger)
Hi there:
I had singal proccossor server with os server 10.2.8 and recently upgraded it to 10.4.6 (tiger) and got the following problem.
This is a file server (all the users save gets thier profile, and data by logging into thier computer) using netinfo.
since my upgrade when I use the admin tool (workgroup manager) I am not able to see the list of my users except Admin!!! any thing worng but in the maintime all of my users can log in normally and gets thier data.
Please help!
Ferooz
Are the users in NetInfo or are they in the directory service? And where is Workgroup Manager looking for the users? Look at the GUI carefully to see -- local users and Open Directory (LDAP) users are different directories... you have to point WGM at the right one.
Similar Messages
-
Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).
Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false -
Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???
Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???
-
When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!
hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
How to upgrade the fwsm image from 3.1(10) to 4.0(8).
Hi all,
I need to upgrade the fwsm image from 3.1(10) to 4.0(8). Can i do it directly from 3.1(10) to 4.0(8) ?
Do i need to upgrade other image also along with Firewall version 4.0(8)?
FWSM# sh ver
FWSM Firewall Version 3.1(10)
Device Manager Version 6.1(5)F
Compiled on Mon 21-Apr-08 17:43 by fwsmbld
FWSM up 2 days 15 hours
failover cluster up 2 days 15 hours
Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash STI Flash 8.0.0 @ 0xc321, 20MB
0: Int: Not licensed : irq 5
1: Int: Not licensed : irq 7
2: Int: Not licensed : irq 11
The Running Activation Key is not set, using default settings:
Licensed features for this platform:
Maximum Interfaces : 256
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
Serial Number: SAD125004FT
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
Configuration last modified by enable_15 at 18:58:52.627 IST Mon Jan
11
2010
Regards
MadhuApplication partitiion is what you will be upgrading from 3.1.(10 to 4.0(8).
MP - maintenance partition is supposed to be 2.1.2 or above which is the same requirement for 3.1.x so, you will be good there.
Pls. check the compatibility with the swtich code in this 4.0.8 Release Note link:
http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html
Pls. check the chassis system requirement in the above link.
commands you will need are:
copy tftp flash:image
copy tftp flash:asdm
falsh:image for OS and flash:asdm if you will be upgrading the asdm as well.
-KS -
Is it possible to upgrade the grapic card from ATI 4670 to ATI 4850
Hello,
i bought a 27inch iMac with an ATI Radeon 4670 grapic chip. At the moment the peformance in Games is enough for me. But for the upcoming PC-Games like Diablo 3 or Starcraft 2, i need a better grapic chip.
So is it possible afterwards to upgrade the 4670 to 4850? It must be a MXM Standard. From there it should not be a problem or?
I hope someone can answer my question.
Sorry for my bad english
W. JacobHi-
Unfortunately, it is both brutally difficult and (of course) warranty voiding to attempt such a thing.
If you are adventurous, take a trip to ifixit.com to get an idea of the difficulity for swapping out the daughterboard graphics chip.
The only way to squeeze the most performance out of your iMac for gaming is to install 64 bit windows 7 via bootcamp, and max out with 16gb ram. Not much you can do besides that.
Message was edited by: kguy -
If i got an iphone 5 and synced it with my computer,
can i get the contract from my iphone 4 to a iphone 5 without upgrading the contract?
(So that i will still have the same contract) (I have verizon.)Ask Verizon.
You will have to activate the phone through them. -
Error while upgrading the patch from RMS 13.1.1.1 to RMS 13.1.1.2
Hi,
While upgrading the rms dbschema from 13.1.1.1 to RMS 13.1.1.2 we are getting the following error update ALC_FREIGHT_COST table or view doesnt exist.
We have checked the data model of rms 13.1.1 and rms 13.1.2 and we couldnt find the table "ALC_FREIGHT_COST."
So anybody could give suggestions on this.
Appreciate your help
Thanks,
SureshI'd ignore the error for the moment and file an SR with OracleSupport to make them aware of the issue and release a better script - all of this assuming that your 13.1.1 starting point is valid and correctly installed.
Additionally you can locate the SQL upgrade script that is actually trying to do something on the mentioned table, and grasp what it is trying to achieve and how relevant that is for you.
The table exists in our 13.0.3 setup. The release notes of 13.1.0 mention a rework of cost component functionality, so seems like it was deprecated in that release.
Best regards,
Erik -
ORA-03113: Error while upgrading the Database from 11.1.0.6 to 11.1.0.7
Hi,
I am trying to upgrade the database from 11.1.0.6 to 11.1.0.7 on OEL operating system.
After applying the patch "6890831" when trying to start the database using "Startup Upgrade" command I am getting the below error.
ORA-03113: end-of-file on communication channel
Process ID: 20826
Session ID: 170 Serial number: 3
I am getting the same error when trying to create the new database using "DBCA".
Please provide me the probable outcomes.
Thanks
AmithBelow entries found in alert_orcl.log file
MMNL started with pid=15, OS id=20571
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Thu Dec 03 20:11:11 2009
ALTER DATABASE MOUNT
Errors in file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_mman_20557.trc:
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
MMAN (ospid: 20557): terminating the instance due to error 27103
Instance terminated by MMAN, pid = 20557
Below entries found in the Trace file generated
error 27103 detected in background process
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
*** 2009-12-03 20:11:14.727
MMAN (ospid: 20557): terminating the instance due to error 27103 -
After upgrading the new operating system on my Droid Razr M it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select multiple message you have to delete them individually or the entire thread. Is there a way to get these back?
Well, that's kind of embarrassing. And I honestly thought I paid attention to that... It works perfectly now, thank you so much!
As expected, cdm-git also works fine since DMs only work in the root mode as of now.
Just for the record, both type commands output "/usr/bin/startx" and pacman -Q gives "systemd 215-4".
Last edited by looki (2014-08-23 13:04:49) -
Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsidi am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid -
I recently had to replace my 2009 Macbook Pro's hard drive. I had the apple store upgrade the OS to Mountain Lion while it was in being repaired. I want to restore all of my old data and files. If I perform a restore from Time Machine, with a date prior to having the hard drive replaced, will it revert back to the old OS?
No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
After you restore from TM, check HD > Incompatible Software -
My mac won't open PDFs anymore from email or websites and I've tried everything to my knowledge to correct this. There's website I that I want to utilize that requires the lastest verision of JAVA and my OS 10.5.8 is too old to do a download of the latest JAVA. So I'm thinking I need to upgrade the OS to something newer?? I'm thinking my hard drive needs to be cleaned up also (re-format?)
This computer is running slower and slower lately also.
HELP!My mac won't open PDFs anymore from email or websites
That's odd. My Mac is 10 years old and runs OSX 10.4 and I can open pretty much any web site I want to, and I have yet to encounter a PDF I cannot open (more advanced ones with Adobe Reader). My computer isn't slowing down but everything else is speeding up.
Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion - https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store. -
Upgrading the database from Oracle 8.0.6 to Oracle 9.2.0
Dear SDN,
We are in the process of upgrading SAP 4.6b to 4.7 R/3 Enterprise.
Source Release:Windows 2000/Oracle 8.0.6/SAP 4.6b
Target Release:Windows 2000/Oracle 9.2.0/SAP R/3 4.7
Can anyone help us in explaining the procedure for upgrading the database from Oracle 8.0.6 to Oracle 9.2.0.
Thanks n Regards ,
Anantha Raman E.Thanks Mr.Mohan
We tried to upgrade from 8.0.6 to 8.1.7 with the help of Inst Guides from service market place..the thing is we created another oracle home with new DBSID ither than the old DBSID...when we started the migration using 8.1.7 Data migration tool its not responding after the first phase CHECKING THE OLD DATABASE...
Pls help us in this regard
Whether we have to migrate or what... -
MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2
I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf
Maybe you are looking for
-
How can I default Firefox to open Google's "past year" search option every time?
Hp 8510W "workstation" laptop.<br /> Winxppro32<br /> Firefox 17.0<br /> No other OS installed.<br /> WISH LIST... ...to set Google's default date range to "past year" under ALL circumstance. Open from desktop, open in newtab, and default to "past ye
-
How to keep an image in thimble?
where should i add my image and how to get that ink an d how add that source?
-
How do I save passwords; the dialog box has no yes option
Whenever I fill in a user name then fill in a password, the dialog box appears asking if I want to save the password. There is a drop down box offering two options, to save or not to save. I choose to save which is in fact the default. However, there
-
I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11.
-
Running I tunes offline when online
I dislike the fact that Itunes doesn't give me the option of turning off its Internet access. When my systems on, it immediatly becomes a part of my sattelite server's lan. The only way at the moment that I can use Itunes offline is to turn my Sattel