Upgrading to 1.1.4 and losing January Software Upgrade

Hi,
I've just upgraded my 16GB iTouch to 1.1.4
Unfortunately, when I did, it lost the January Software Upgrade.
I not longer have the laptop that I used to install the Software update, so I don't have my own copy of "iPod touch App Pack 4A93.ipa".
I tried to use my friends copy of the file, but it's not letting me install it.
I keep getting "The iPod touch Software Upgrade was not installed on this iPod "iTouch" because you are not authorized for it on this computer"
I've verified that I'm logged in with my apple ID, but I think the ipa file is tied to my friends account.
Is there any way that I can download a new ipa file for my account? or is there anything else that I'm missing?
I've no way of getting the computer back.
missing my mail already
thanks,
Stephen.

perhaps the only way you will be able to get it back now is to send an email to apple support explaining your situation. i would also check your purchase history and provide them with the order number from when you purchased the upgrade. i am pretty sure they will allow you to have it again. they will put it in your account and you will have to click the "check for purchases" option in itunes to download it.

Similar Messages

  • January software update gone.

    i switched computers and the january software update is gone..i also updated to 1.1.4 and i cant re-arrange my icons anymore..HOW CAN I GET IT BACK!!??

    Well I know there a place it downloaded toto c:/document and setting/user name/application data/apple computer/itunes/mobile applications/
    There should be a file called "iPod touch pack 4A93.IPA"
    install that file. Please note: I have not tryed this I found out about this from a other user that has the iPod touch on this Discussions Form.
    So if it fails try emailing them.
    Good luck
    Jeremy E

  • Can I purchase the January software upgrade with an iTunes gift card?

    Hey guys,
    I have an iTunes account, but do not have a credit card on file. I have always just used gift cards to buy music. My question is: Can I use a $20 gift card to purchase the January software upgrade for the iPod touch?
    Thanks!

    Hey!
    Yeah so long as your credit is monetary and not songs in your iTMS account then you should be fine.
    I used up the remainder of a £25 gift card to purchase my update.
    Cheers,
    John

  • January Software Upgrade - Availability outside the iTunes Store countries

    I have (an iPod Touch) model number that should receive a free January Software Upgrade as stated in the Apple Price Protection Policy.
    Mention that it was bought in the European Union, France, while I was on vacation. However I don't see an option to upgrade in iTunes without being asked for an iTunes Store country credit card. I currently reside in Romania(which is also part of the E.U.).
    I searched the support pages and I didn't a Apple customer support email address to send my complaint to.
    How can I receive the upgrade? Is this upgrade limited to ITNS countries?

    I had thought not, but I tried last week after a discussion with someone from Apple (Asia Pacific). I had earlier bought the QuickTime Pro licence but that was with help, so I registered at the Hong Kong online store and bought the licence for Aperture 2. As for hardware, as far as I am aware, No.
    For me as well, the country I am in does not have an Apple online store (or an Apple store come to that) and the distribution system is somewhat different. Those who wish to be "in the loop" use a franchise system -- iStudio and iBeat.
    I would hope that the Apps Store would take a different route. Some friends here do have credit cards issued in other (acceptable) countries and they are able to buy from iTunes stores. I have been here so long that all my credit cards are Thai issued -- fine when I go to San Francisco or London; fine with the online Apple shop; fine with music purchases from a number of sources in the US; but not for iTMS. I can sort of accept restrictions on the music and videos (try the BBC for tight-a** behaviour), but the iPod touch software burns.

  • Can't Get January Software Upgrades

    Ok so I just bought this iPod Touch from my cousin a few days ago. I wanted to get the software upgrades but I don't know how.
    I went to http://www.apple.com/ipodtouch/ and clicked on the icon on the bottom left that states "Have an iPod Touch without the new software? Five new applications for just $19.99. Get the January Software Upgrade."
    It then opened up my iTunes and went to some iPod touch January Software Upgrade page.
    There is no "Buy Now" button just a button on the bottom right saying "OK" but it doesn't do anything...
    I have the latest iTunes and software version 1.1.4
    someone help please...
    Message was edited by: Santi78342

    Hi Santi78342m
    You're using the wrong link. Use [this one|http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=271872604 &s=143441].
    Hope this helps!
    !http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png!

  • Cannot download the January Software upgrade

    Frustrating....i click on the January software upgrade, yes iTunes and iPod Touch are the latest, it takes me to the page where you click ok, that gets me to the store, and yes I have an account, and then i click on the JSU, and it brings me back to the OK page, anyone any suggestions as to how I can get this upgrade to my iPod Touch? thanks, e_moma

    I got exactly the same problem :
    I go to the itunes store, click on the "January update" button --> it leads me to the presentation page of the update, with only a "ok" button at the bottom --> I click on it, and it brings me back to the itunes store... that's all... And I can try again and again, it's a very beautiful infernal loop :-D
    I precise that itunes is 7.6, iPod touch is 1.1.3
    I register my iPod few days ago when I bought it, so I cannot do it again (or I do not know how to do...)
    Does anybody have a solution ?

  • Impossible to get January Software Upgrade?

    Is it really impossible to get the January Software Upgrade if I don't reside in a country with an iTunes store?

    Hi Firewhisky,
    Actually it is. Sorry!
    However, if you have any friend that resides in one of those countries, and you visit him, I think it would be a great chance to get it on your iPod!
    Hope this helps!
    !http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png!

  • Cannot Get January Software Upgrade To Install

    I am unable to install the January Software upgrade on my iPod Touch. I have have reset it multiple times, and tried all of the troubleshooting tips I could find on here.
    The error I get is:
    "iTunes could not install the iPod touch Software Upgrade on the iPod because an unknown error occured (0xE8000001)."

    The update is stored in the user folder of the user you are logged into your computer as. If you create a new user on your computer you will need to move the update from the old user account to the new user account in the correct location. It is stored at (username)/Library/iTunes/Mobile Applications. Create this folder structure in the new user account on your computer, and move the ipod touch app pack to the new user account. Make sure you check permissions on the file after you move it to be sure that read and write privileges are set for the new user. Also be sure you do not have the ipod set to manually sync.

  • CAN'T DOWNLOAD JANUARY SOFTWARE UPGRADE!!

    hey so ok this is what's happening.
    before we start YES I have updated to both ipod touch software 1.1.3. AND to itunes 7.6!
    I plug in my iPod, open iTunes, and go to the iTunes store. I click on the "January software upgrade" link on the store's homepage, and it takes me to a white page with pictures of iPod touch, descriptions of the new apps and features, icons for them, and a list of system requirements. A message in red text says "Connect iPod touch and click 'check for updates' before installing the January software upgrade". Umm but I already did! Also, at the bottom of the page of the left and right sides of the page are buttons saying "no thanks" and "remind me later" respectively.
    There is no option anywhere on the page to purchase the upgrade. What gives?

    I seem to be having the same problem as others. I have purchased the software but cannot get any further. It will not appear in the purchased box under store. I have spoken to Apple and they were no help whatsoever. I am getting really hacked off. Would you walk into a shop buy something and then be told sorry you cannot have it, email us and tell us what your problem is. MY PROBLEM IS I HAVE PURCHASED SOMETHING AND I CANNOT HAVE IT.......... CAN ANYONE HELP

  • My ipod was set up on a Mac. Now I have a PC and want to sync my music on iTunes, but I can't without reformatting my drive and losing my music.

    My ipod was set up on a Mac. Now I have a PC and want to sync my music on iTunes, but I can't without reformatting my drive and losing my music. Help. I no longer have a Mac. I want to keep the music and videos I purchased. Since it is an iPod classic (80GB) I cannot even use the iCloud. Is there a way to move my ipod's music so I can reformat it to my pc?

    WIndows is asking you to reformat the iPod's hard disk because it's probably in the Mac OS X Extended Journaled file system format which the Windows OS can neither read or write to.  Reformatting will erase all content from the device and rebuild the filesystem as FAT32 unless you specify it as NTFS (which you shouldn't do).
    If you want to be able to use your iPod to copy music from your Mac to your PC, you'll need to either pre-format it as FAT32 using Disk Utility on your Mac and then copy everything over to your PC, or use third party software such as XPlay that allows a Windows PC to read and write to a Mac formatted iPod.
    Perhaps you could take a look at this article for other ways to copy your iTunes library and files from your Mac to the PC.
    iTunes: How to move your music to a new computer
    B-rock

  • How can i change a pop mail a/c into an imap a/c on my ipad2 without deleting the pop a/c and losing everything?

    how can i change a pop mail a/c into an imap a/c on my ipad2 without deleting the pop a/c and losing everything?

    Ernie Stamper wrote:
    If the Inbox for this account only is revealed, is there any triangle beside it?
    Ah, yes, I see! Silly me to be looking for Sent mail under "Sent"! Indeed, there's a disclosure triangle next to the account name under "Inbox", and wen you open it, it shows Drafts, Sent, spam, and Trash. The sent items are indeed there.
    Mind you, my Dot Mac accounts show up normally, i.e., their sent mail goes under "Sent". Wish all IMAP accounts did that. It sure isn't logical to show sent mail inside an inbox...
    But to answer your question: In addition to having the "Sent" folder for the account under "Inbox", I also have a folder for the account under "Sent". This folder disappears when I check the box to store messages on the server. There were emails in it (the ones I placed there myself). I have now moved those emails to the sent sub-folder under the account under "Inbox". Even with the "store on server" option UNchecked, the emails were instantly duplicated to the server, so that they were present both locally and remotely. I then checked the "store on server box"; this made the mailbox for the account under "Sent" vanish.
    To summarize: things appear to work normally now, except that I find it very inconvenient to have to look in two separate "Sent" folders to find emails I've written.
    Daniel

  • My ipad mini is disabled. if i know my password is there a way i can fix it with out restoring it and losing my data? i have not done a backup.

    my ipad mini got disabled due to my little sister who used the wrong password. if i know my password is there a way i can fix it with out restoring it and losing my data? i have not done a backup. help me please!

    Once disabled, you have to restore/recover the iPad before you can use it.
    You will lose your data.

  • Since upgrading to lion and updating HP software my printer (photosmart D5160) will not print to CD/DVD when I try it says my printer doesn't support CD printing. any help will be welcome

    Since upgrading to lion and updating HP software my printer ( HP photosmart D5160 driver 3.3.0) will not print to CD/DVD,when I try it says "your printer does not support CD printing". any help will be welcome.

    I see those are old posts above but I'm just now having the same problems. I have the original software CD that came with my Photosmart D5160 printer but I can't load it. I get the message "You can't open the application "HP Installer" because PowerPC applications are no longer supported". So I don't have that going for me, which is not nice! But I couldn't really care less about that if I can just find a CD labeler software that will print from my Mac to the D5160. I'd rather by new CD labeler software than a new printer. I've tried a few free CD labeler software downloads, including iWinSoft Label Maker, but nothing has worked so far. I think there's an answer somewhere; I'm able to print documents on regular paper using this printer, but I only bought it (many years ago) to print CD labels and some pictures. It's been used only sparingly and it's been in storage since I bought my Mac 3 years ago, mainly because a I got a free printer with my purchase. Any help is vertainly appreciated!!!

  • I have a external back-up that my iMac (10.6.8) won't mount. Is there a way to mount without intializing and losing back-up data?

    I have a external back-up that my iMac (10.6.8) won't mount. Is there a way to mount without intializing and losing back-up data? I used time machine to back-up to a Seagate Go-flex hard drive. I get a message from my iMac that says it doesn't recognize this drive and wants to initialize. Hope someone can help.

    Try connecting the drive to a Windows machine, then ejecting.  If it won't eject properly, restart the Windows machine, and try again.  Then try connecting it to the Mac.

  • Why is my macbook pro running so slow and losing internet connection?

    Why is my Macbook Pro downloading so slowly and losing internet connection frequently?

    Write off the MS stuff as indicators for now--starting with Office 2008, they developed very long launch times. The time to launch 2008 on my old 1.25Ghz G4 and my MBP 2.2G are virtually the same. Even document opens/saves are slow compared to Office 2004 and earlier.
    1) You have adequate hard drive space so that eliminates one of the usual suspects.
    2) Check for runaway background processes. Quit all running user applications so the computer is at normal idle. Find Activity Monitor in Applications > Utilities and launch it. If you've not run it before, change the "Show" pulldown at the top of the AM window from its default of "User Processes" to "All Processes." There is a column for "%CPU." Click that column header to sort by CPU usage. Watch the processes "bubble" for about a minute to get a better picture of the usage.
    If any process is using more than about 25 percent of the CPU cycles while the computer is idling, post the names of the processes and we can see if they can be eliminated. My MBP shows nothing using more that about 5 percent on any given test run as long as I close all my user apps.
    3) If you have never done any sort of maintenance procedures, taht can slow you down. Simply restarting the computer a few times a week clear a lot of temporary files. You also may wish to review this article on the Mac OSX periodic maintenance scripts, which, if run, also do a lot of cleanup:
    http://thexlab.com/faqs/maintscripts.html
    There are other useful articles on file maintenance associated with the one. Here's the index:
    http://thexlab.com/faqs/faqs.html
    Check out articles with "Maintain" and "Tuning" in the titles.
    4) Use Disk Utility to check the SMART Status of your hard drive. A failing drive can make things slow before it makes things stop.

Maybe you are looking for

  • Dependent parameters in oracle report builder

    1)in user parameter property we have list of values.can we write select query for binding? for example:: select empno from emp where deptno=:deptnum :deptnum is first parameter it displays distinct dept nos. if i do like this it is giving error:: bin

  • PreparedStatement in batched mode gives Exception

    Hi I have a problem. I am running PreparedStatement in batched mode, actually I am using Springs BatchSQLUpdate component. Now i am creating a batch of about 10000 inserts / updates. However if any single of these inserts / updates fails, it gives ex

  • Can anyone help me with my 7370?

    Hello My screen has broken on my phone (7370) and they are replacing the phone tommorrow but I have a problem in that I have all my contacts stored on the phone and I need them on the SIM. The phone still works fine, so what I'm asking is: Can anyone

  • Slow Print and Print Setup command in Reader Ver. 8.1.2

    Print and print setup command take over 30 seconds to load on Reader ver. 8.1.2. I tried ver 6 and same thing happens. Using the print shortcut and same thing happens. System: New Dell computer (Windows XP Pro, SP2). Any advice would greatly be appre

  • OSPF equal cost - loops

    Hi Please see attached diagram. When I traceroute from the Cisco 892 router (on the top) to an 10.31.48.0 address the packages is looped between the two cisco 2821 routers two times before the package is delivered. Type escape sequence to abort. Trac