Upgrading to J2SE 1.4.2-beta causes XML problems

I upgraded to 1.4.2-beta and now portlets in Jetspeed display the following error:
problem in SAX transform: org.apache.xml.utils.WrappedRuntimeException: The output format must have a '{http://xml.apache.org/xalan}content-handler' property!
This did not happen with 1.4.1. Is there some workaround without dropping back to 1.4.1?
Please also refer to Apache/Jakarta Jetspeed Bug 21131 for discussion of the impact.
I have tried moving xalan and xerces jars into $JAVA_HOME/jre/lib/endorsed without success.
I think that the XML parser should be removed from the JDK. This is causing a great deal of impact. With a XML parser included in the JDK there is no way to override it on an application by application level. You can only override it on a JVM or Servlet container level. This is not satisfactory.
-1 on including an XML parser in JDK.
Gerry Reno

I too have this problem when deploying my webapp to Tomcat 4.06. I never had problems with 1.4.0!

Similar Messages

Can't upgrade ipod touch to ios 5 beta 2?

Hi everyone! I recently tried to upgrade my firmware from ios 5 beta 1 to ios 5 beta 2 (I have a developer account, paid the $99 and everything).
The upgrade to beta 1 from 4.3.3 was pretty much flawless. When I tried to upgrade to ios 5 beta 2, it seemed to work until the last step, at which point the ipod touch was off and could not be turned on. When connected to a computer, it said it was stuck in recovery mode. I couldn't switch my firmware in Organizer any more, not even back to beta 1.
I restored down to 4.3.3 again cause I figured it would wipe the whole thing and let me upgrade back to beta 1 at least. That much worked, I have an ipod with 4.3.3 on it.
Now when I try to upgrade back UP to beta 2 or even beta 1 again, I get this error: "Could not allocate buffer (file exists)" and the ipod goes back into recovery mode, and I must again restore down to 4.3.3.
What file is this, how can I delete it, and how can I upgrade again to beta 2? This ought to be the last time I need to upgrade with a wired connection, since all updates from Beta 2 onwards are OTA as far as I know.
I was quite fearful of "bricking", but a friend who is far more familiar with the inner workings of the ipod touch than I am has assured me that since the computer detected it in recovery mode, it wasn't a lost cause.
I was originally attempting the install from a slightly older version of Xcode, which is probably the root cause of this problem and I am now kicking myself.
Thanks for the help!

Please use the confidential forums created for this purpose:
iOS 5 beta

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

I'm not trying to minimize your issues, but I have an iPhone 5S and find that I have not had these types of problems on AT&T. I'm wonding if something has gotten stuck in a loop that is continually trying to use data. If you make a good backup of your phone, try restoring it as new, and do not add anything to the phone right away. Let the device run like this for a little while and see what kind of usage you have. You report you phone is showing usage of 21GB. Did you rese this setting on the phone to begin at your billing period? The reason I ask this is some people believe this setting resets on its own with your billing period, it does not. This has to be manually reset by the user, so it might not be that accurate depending on the last time that you reset it.
If the phone seems to not use so much extra data during the period the device does not have extra apps on it, then try restoring from your backup and see what happens. If this increases your data usage quite fast again, then there is probably something corrupt in the backup that is causing this issue.

I've got a Iphone 3 G with IOS 4.2.1 .I would like to make an Upgrade to IOS 4.3. or better. How can I o it?

I've got a Iphone 3 G with IOS 4.2.1 .I would like to make an Upgrade to IOS 4.3. or better. How can I do it?

The 3G was discontinued almost 3 years ago. 4.2.1 is the end of the line for it.

Upgraded Adobe LR 4.1, CS6 Beta & got the Canon 5D Mark III, WHEN is next dot release Camera Raw?

I Purchased the Upgraded Adobe LR 4.1, CS6 Beta & got the Canon 5D Mark III, Mac Pro server update to Lion, WHEN is next dot release Camera Raw? My workflow has trippled in time because of this issue. I'm so frustrated with having to convert images in a slowed up piece of crap canon software package and then wait another decade for the newest LR to load the images I could crap fire! Come on Adobe, where's the release? After a few grand you'd think we'd get a better response time. As for Canon, they are not consistant with community software sharing and can kiss my *!! because to leave Adobe hanging sux!
There should be new laws that penalize jerks that screw with workflow!
Time is money, let's go Adobe!

"so there are no Adobe staff here to see your rant."
Oh, they're here and they see it...
BTW this might help?

Hi, i was just about to download aperture 3 but then saw that version 4 may be available very soon... if i download 3 will i get a free upgrade to 4 or am i better off waiting? many thanks

Hi, i was just about to download aperture 3 but then saw that version 4 may be available very soon... if i download 3 will i get a free upgrade to 4 or am i better off waiting? many thanks

Thanks very much for your help, this is exactly the information i was looking for.
The idea of the aperture 4 release came from the october keynote presentation where you can see the new 'mac pro' being used with a different looking aperture interface by a photographer, rumored to be a trial version of a4. i apreciate that it may never materialise but there is hope! i will wait for the release of the mac pro and see if version 4 comes at the same time.
Untill then i will continue to use photosphop elements for detailed work and start to use iphoto for more basic adjustents.
I also noticed on the app store reviews that a lot of people are having problems using aperture 3 since upgrading to Mavericks (which am running). this has put me off buying the program at ths time.
Thanks again for your help, James.

HT4859 If I upgrade to an Iphone 4s, can I delete the account from my old Iphone and will it cause any problems?

I have upgraded to an Iphone 4s from an Iphone, can I delete the icloud account of the old phone on my new one without it causing any problems? it seems to have a lot of storage (3.3Gb)

You should be able to copy all of your purchases (apps, music, films etc) from your current iPhone to your computer's iTunes via File > Transfer Purchases. As long as they remain available in the store then apps can be re-downloaded, music can be re-downloaded in some countries, and TV shows and films in fewer (and even where films can be re-downloaded not all film studios have agreed to it) - ringtones and audiobooks can't be re-downloaded.
Re-downloading : http://support.apple.com/kb/HT2519
In terms of the apps content and settings, then if you backup the phone to your computer's iTunes then you should be able to restore that backup onto your new phone : how to backup and restore. Passwords (email, router, website) won't be restored onto a different device so you will need to re-enter them on your new phone.
You can also copy photos off your current phone. Just in case the backup and restore doesn't work (it should but it's best to be safe), you may also want to copy any important documents off your current phone as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc.

I have been using iCloud since it came out to coordinate my schedules from my phone, ipad and Mac laptop. Last week they stopped synching...I can't upgrade b/c of memory. Could this cause the problem?

I have been using iCloud since it came out to coordinate my schedules from my phone, ipad and Mac laptop. Last week they stopped synching...I can't upgrade past OS 5.1.1. b/c of memory (1st generation iPad and iPhone 4s). Could this cause the problem after the release of the new OS?

Welcome to the Apple Community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

TS5376 Downloading the upgrade to 11.1.4 has caused timewasting problems and errors - R6034 - and no solution. What's gone wrong?

Downloading the upgrade for iTunes to 11.1.4 has caused timewasting problems and error message such as R6034. I have followed Apple's advice to reinstall iTunes, but still have the problem or error messages and no iTunes. What's going on? Upgrades until now have all worked smoothly.

Doublechecking. Have you also worked through the following user tip?
Troubleshooting issues with iTunes for Windows updates

I have Mac OSX version 10.5.8 How can I upgrade to 10.6.8 or better?

I have Mac OSX version 10.5.8. How or can I upgrade to 10.6.8 or better? I need it so I can sync my iphone 5c.

Depending on the total installed RAM, you may wish to upgrade
the chip memory RAM as well as the Mac OS X system, too...
in addition to retail OS X DVD, Niel pointed to in the link.
according to http://mactracker.ca database RAM specs are:
Maximum Memory
8.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
...if yours is as stated, MacBook5.1 Aluminum 13-inch Late-2008
Good luck

Will 16Gb RAM on a Early 2011 2.7 Ghz i7 Macbook 13" cause any problem? Also i plan to upgrade to Mountain Lion, will it work?

I want to upgrade my machine with 16 GB RAM, it already has a G.Skill single RAM chip of 8gb. need help with the following. Will upgrading to 16Gb RAM on a Early 2011 2.7 Ghz i7 Macbook 13" cause any problem? Also i plan to upgrade to Mountain Lion, will it work?

It won't cause you any issues or problems....
it is however, suggested you install the same brand RAM that are of the same specs....
1333MHz........
Installing different brands with different CL speed might cause issues....
so if you already have a G.Skill RAM installed, then install the same brand.

Flash Player 10.1 Beta cause Mac screen to flicker

I installed Flash Player 10.1 Beta and started noticing my screen to flicker ( fade to blue desktop color like the monitor was being unplugged and plugged back in ).
I uninstalled 10.1 and went back to 10.0.32 and now everything is working fine.
I figured it was screwing with the video card (details below) trying to offload processing. Not sure what type of flash use was causing the problem.
Here is my configuration for Flash dev team.
Mac Pro 2 x 2.66 Dual Core Intel Xeon
9 GB 667MHz DDR2
Mac OS X 10.6.2
nVidia GeForce 7300 GT (Stock and single monitor is plugged into this card)
nVidia GeForce GTX 260

Hi, Oh, ok. I wasn't sure, some of the users here on the forum install it thinking it will help solve their problems with Flash Player. http://labs.adobe.com/technologies/flashplayer10/releasenotes.pdf This link will explain where to report issues that end users experience with beta. That would help them. The forum here wouldn't help with that since Adobe already
has a site set up for feedback on the beta. Just thot I would mention that, but you'll see that in that pdf article.
The more feedback of issues from end users the better. Makes for a smooth final release, so thanks for helping. A lot
easier to get all of the "bugs" out now than have to deal with them after the f.r.
Thanks,
eidnolb

Upgrade to Lion and then to Mountain has caused me problems

After upgrading to Lion a year ago or so I developed a problem on my MB Pro that I'd never had before. (1) My Mail app starting acting funny. I'd compose an email then click send, but it would sit in the Outbox--for hours, even days. I had to login to MobileMe to send mail and to get Mail. And (2), my system would frequently crash. If I left 3-4 apps open and then went and had lunch, for example, when I came back, my system had crashed. The screen was blanked out, and I had to move the mouse, kind of use it like an eraser to erase a part of the crap in the foreground of the screen so that I could see my login, after which I would enter my password and then login. After login in I would find that all of my apps had either crased or were frozen. I thought it might be that I needed to upgrade my Memory, so I upgrade from 4 GB to 8 GB, but this didn't do any good.
So...after Mountain Lion came out, I upgraded, hoping by some miracle this might solve the problem. But no, the problem persisted. I had AppleCare and so I called Apple three times about this problem, but they couldn't solve it either, although one senion tech adviser did manage to get my Mail app working again. He went to some folder (I wish I'd noted what this folder was at the time but I didn't), found there was sever gobbly-gook or junk files inside it, and then proceeded to delete them. After this my Mail app worked OK but the other problem persisted.
A week ago I backed up everything on my MB Pro to my Time Machine BU, bought a new Mac Mini, and then used Migration Assistant to import all my data from the Time Machine BU. I was hoping for a miracle--i.e., hoping that this problem would disappear. But not only has the problem not disappeared, I now can't even use my Mail app on the new Mac Mini. It is completely disabled...plus I still get the random crashes. I am getting by using my old MB Pro. I've transfered back to my MB Pro my essential files and I am using it while I try to figure out what in the **** is going on with the original data on my Mac Mini.
Any ideas would be much appreciated.

Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on
the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button and set the Zero
Data option to one-pass. Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

The upgrade to Firefox 4 is causing massive problems with my computer. How do I uninstall it and go back to using the previous version?

Firefox 4 is absolutely awful - it is causing massive problems with my computer. How do I uninstall Firefox 4 and go back to the previous version of Firefox?

According to the instructions given on the Norton Community forum under "Other Norton Products/Comcast-Customers - Norton Toolbar Problem in Firefox 10", I have done everything necessary. And I do have a Norton toolbar (Safe Web and Identity Safe) when I open Firefox 10. As was mentioned in the previous posts here, you need to run manual LiveUpdate then reboot until you have version 5.2.0.13. Then reboot and run manual LiveUpdate again and reboot once more. One thing that I noticed is that Norton never told me that it had updated the patch for Firefox 10, so I didn't know. I guess if you have the toolbar when you run Firefox 10, then you have done it all.

I use the SCC mediaserver in my work, and the crop function has stopped working on Firefox, although it works on Internet Explorer, and I'm wondering if a recent upgrade caused that problem.

I am a newspaper copy editor and use Firefox to work from home. I use the SCC mediaserver to crop photos and place them in the JazBox system, which includes Adobe InCopy and InDesign. For some reason, the crop function is not working on the SCC when I go on it in Firefox, although it's working in Internet Explorer, which is much slower. I didn't have this problem until I installed a Firefox update today. What can I do?

Try to update to Firefox 8.0.1
You can find the latest Firefox release here:
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Upgrading to J2SE 1.4.2-beta causes XML problems

Similar Messages

Maybe you are looking for