Upgrading to Web Basic+ after going live.

I'm new to Muse and Business Catalyst (BC). I just published my first temporary website on Business Catalyst using Muse, but have not pushed it live yet. From what I've read (and watched), it seems that I have to Launch the site using my one free hosting entitlement before I can change the domain name and upgrade from Web Basic to Web Basic +. Ultimately I want to have a Web Basic + account and use the domain name I own instead of the businesscatalyst.com domain. How to accomplish this is where my confusion comes in.
1. I understand that once I've Launched the site I can direct my domain name to Business Catalyst by going to my Domain Registrar (Network Solutions) and entering the following information in their Name Server fields:
ns1.worldsecuresystems.com
ns2.worldsecuresystems.com
ns3.worldsecuresystems.com
Is this correct?
2. After I do this how do I upgrade from Web Basics to Web Basics+? Or should I upgrade before I redirect my domain name?
3. Is there a way to upgrade before I launch the site so I don't have to use the one and only entitlement I have?
4. If not, can I recover the entitlement after I've made the upgrade? (that is if I can ever figure out how to do the upgrade; can't find anything in Admin that will let me do it.)
5. If so, how do I recover it? I really don't want to lose my free entitlement just so I can make the upgrade.
Please help! Everything I've been able to find talks about Partner Portal and upgrading client accounts; all it's done is confuse me.

Hello,
It is correct that you'll first need to launch the site as one of your free entitlement sites in case you wish to take the site live just now (To launch the site and take it live, you must click the "Launch Site" link available in the dashboard section of your Business catalyst site). Once launched, you should get the upgrade site button under Site Settings -> Site Management link. Using that option, you can upgrade the site to a higher plan of your choice and once upgraded, the free entitlement will be credited back to your account. In this procedure, however, the site becomes live from that very instant when you click the "Launch Site" link in the 'Dashboard' area of your Business Catalyst site.
If you however, want the site plan to be upgraded to a higher plan while still keeping the site in "trial" mode, plase reach us directly via chat, by going to this page and selecting Adobe muse from the dropdown: http://helpx.adobe.com/contact/index.html
To answer your other queries:
1.
I understand that once I've Launched the site I can direct my domain name to Business Catalyst by going to my Domain Registrar (Network Solutions) and entering the following information in their Name Server fields:
ns1.worldsecuresystems.com
ns2.worldsecuresystems.com
ns3.worldsecuresystems.com
Is this correct?
- Yes, this is correct. Detailed explanationon the same are provided in this article: http://kb.worldsecuresystems.com/kb/change-domain-name-site.html
2. After I do this how do I upgrade from Web Basics to Web Basics+? Or should I upgrade before I redirect my domain name?
- It's better that you upgrade the site before you add the domain name to it. Redelegation of the domain can be done at any time, be that before or after the upgrade.
3. Is there a way to upgrade before I launch the site so I don't have to use the one and only entitlement I have?
- When you upgrade the site, the entitlement site will be credited back to your account. And the entitlement sites are used only when the site is pushed live. In your current arrangement, as you confirmed, your site is still a trial site, so currently, you still have your entitlement site available. This entitlement will only be used when you push this site live, and will be automatically credited back to your account when this site is upgraded to another plan.
4. If not, can I recover the entitlement after I've made the upgrade? (that is if I can ever figure out how to do the upgrade; can't find anything in Admin that will let me do it.)
- Answered in the 3rd point.
5. If so, how do I recover it? I really don't want to lose my free entitlement just so I can make the upgrade.
- Answered in the 3rd point.
Hope this helps.
Cheers
Parikshit.

Similar Messages

Assign Company Codes to new Credit Controlling areas after going live.

Dear FI Experts;
Our Status Now:
We Have 3 Company Codes, CC 1000, 2000, 3000 and one Credit Controlling Area Code 0001, and the Customers are assigned to this Credit Controlling area with no problems and we are live since about 9 months ago.
Requirement:
We have a requirement to split the Customer Credit limit between companies, which means we have to create more credit control areas for example CCA 0002, and 0003, and though assign our 3 company codes to the new credit control areas, as follows:
CC 1000 to CCA 0001
CC2000 to CCA 0002
CC3000 to CCA 0003
And my Question is, what is the procedures to follow to do that (Not a Customization Procedures, I mean the How the Customers would be affected and the open items for them and how to resolve that), since as mentioned above we are already live since 9 months ago, and credit management is active and all our customers are assigned to our old Credit control area 0001, and also what is the consequence of doing that new assignment since we are live, thanks for your reply

You will need to manage to create new credit master data under new credit control area. System should reorganize existing credit data after reassignment, that is when you change master data (create credit master under new credit control area), new credit exposure is calculated based on AR in company code and existing open orders will get rechecked for credit under new credit control area & new risk categories assigned to them.

Weird Internet Explorer Issue: Elements not in place after going live

Has anyone run into this? I am working on my elements and pages in Dreamweaver (CS5) and they are now live at:
http://www.blackcreekisc.com/TEST/index.html
Unfortunately, sometimes in internet explorer the elements are nowhere near where they should be. I have to click "refresh" several times to get them to "jump" back where they should be. The frequency and elements that are out of place is not consistent. This is very strange and frustrating. Can anyone help?

Rock On! I found what seems to be a fix for the "jumping" problem. Forcing
the browser to open in IE7 with the meta tag:
DOES fix the jumping problem. It does open up a can of slightly lesser
paragraph placement issues, but these are mild comparitively.

Client can't send or receive emails (hosted externally) after going live

Nameservers and MX records have been entered but mail has been down for almost 24 hrs, what steps do I need to take with the client to resolve. Domain is deignmode.com.au.
thanks Paul

Brad, This is the bounce email I've received. Does it help at all?
This is the mail system at host smtpgrave05.b.hostedemail.com.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
                   The mail system
<[email protected]>: Host or domain name not found. Name service error
    for name=remote.designmode.com.au type=A: Host not found
Reporting-MTA: dns; smtpgrave05.b.hostedemail.com
X-Postfix-Queue-ID: D51DD613FFD6
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Thu, 7 Jun 2012 23:46:50 +0000 (UTC)
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 5.4.4
Diagnostic-Code: X-Postfix; Host or domain name not found. Name service error
    for name=remote.designmode.com.au type=A: Host not found

Opening balances update after go live

hi members,
is there a possibility to update the opening balances uploaded initially after we Go-live?
lets take an example, say, On the first day of the fiscal year i have uploaded vendors with an initial details consisting of 3 bills and later after going live i found that i need to upload another 2 bills.
I did my initial upload with the help of LSMW and will i be using the same transaction or anything other than this if i need to update the opening balances.
I think we will be using the Retained Earnings acct as the offsetting account in the LSMW template, if the bills are concerned with expenses and if not we will be using other balance sheet accounts. Correct me if i am wrong.
thanks in advance and its going to really help me
regards
suresh

Hi Suresh,
Yes you can upload the balances after Go live as long as you can justify it to your auditors and till you get a balanced Trial Balance (TB).
You dont have to offset your vendor line item with the retained earnings account. You should debit the expenses account and credit the vendor account. You retained earnings account gets adjusted accordingly and will take care of the difference in the Balance Sheet due to the vendor line item upload.
Hope you understand. Please revert if you have questions.
Regards,
Mike

Depreciation is not calculating for the first month after go-live

Hi gurus
I am trying to calculate depreciation for the first month after going live of the project.
But system is not posting anything
I am using AFAB
Test tun
But no details
Even no error messages
Pls help me to proceed further.
Reply will be appreciated with full points
Thanks in advance
Sneha

Hi
Thanks for info
I tried even with Repeat run and other modes also but vain
Am able to see the planned amount in Aw01n asset explorer.
But even now it is not posting But there is no error
Pls help me
Thanks in advance
Sneha

Going live check for SAP upgrade projects

Hello,
I am interested in "going live check" service and procedures for my upgrade projects. May I find any documentation? Do I have to pay for it?..
Thanking you in advance and a happy new years!
Kind regards
Nilüfer Çalışkan

Hi Nilufer,
The following Input as follows :
Source : http://www.thespot4sap.com/upgrade_guide_v2.pdf
This service is included as part of your annual maintenance fee.
The underlying concept of the SAP GoingLive Functional Upgrade Check is
to ensure smooth operation of your mySAP.com solution by taking action
proactively, before severe technical problems occur.
The GoingLive Functional Upgrade Check is made up of three sessions
(Planning, Analysis and Verification)two sessions (Planning and Analysis)
before the upgrade and the other (Verification) after the upgrade.
Planning Session: This session should be performed as much in advance as
possible when the upgrade is first being considered.
Analyses compatibility for the target release with regards to connected
systems in the Solution Landscape, OS version, DB version, installed Add-
Ons, Plug-ins, Country Versions, and so on.
Analysis Session: It is generally performed two months before the
production upgrade (consider lead time for hardware procurement).
The focus is on resource planning and system configuration.
There is a high-level hardware plausibility check (this is not a hardware
sizing exercise).
Potential resource bottlenecks are identified.
Necessary changes will be recommended to prepare the system for the
productive use of the new release.
38 SAP Upgrade Guide | Simplifying Your Upgrade
Verification Session: Generally performed four to six weeks after the
production upgrade, and the recommendation from the analysis session
implemented.
Comparison of performance with results prior to upgrade
Recommendations on configuration and optimization
More information and ordering . For more information, see the GoingLive
Functional Upgrade Check web page at:
<b>http://service.sap.com/goinglive-fu</b>
To order a GoingLive Functional Upgrade Check, contact SAP Customer Care
Center at least eight weeks prior to the planned upgrade of your production
system.
For customers of value-added resellers (VARs) such as CBS customers in the
US, special conditions apply. Contact your VAR.
Remote Upgrade Service
Remote Upgrade Service is a technical upgrade that is performed by SAP
remote consultants. Pricing is based on the complexity of the customers
environment.
SAP performs the technical upgrade of your system, allowing you to focus on
the functional and training side of the upgrade. You are still responsible for
resolving object conflicts.
See SAP Notes 106447 and 84044.
The Remote Upgrade Service is an attractive option for CBS sized customers
with small or non-existent mySAP Technology group.
For more information see the Remote Upgrade Service web page at:
http://service.sap.com/remoteupgrade
Resources
The following list shows some of the resources you can use as you prepare for
your upgrade of SAP. These resources include:
Your installation partner
Customers and others you have networked with at customer functions and
conferences such as:
ASUG
Hope this Info helps you.
<i>Advanced New Year wishes.</i>
Br,
Sri
Award points for helpful answers

BEx web problem after upgrade: hierarchy variable and OK button

Hi experts,
we are busy in an upgrade project in which both portal and BW are being upgraded to 7.40.
After upgrading we find several problems in which we get stuck.
First problem: every query that has a variable on an infoobjects marked with a hierarchy does not work in Java Web.
As soon as we press the lookup button the browser freezes.
In ABAP web en Bex analyzer everything is OK.
Our release is BW 7.40 SP5. For the Java things we had to upgrade Bex web components to 7.40 SP6.20 (BW Java and portal system).
On OSS, SCN and google we cannot find any clues for this.
We are preparing the OSS call for SAP but maybe anyone of you experts has faced the same issue.
Any advice is welcome.
Second problem:
When a variable screen pops up and everything has been filled in, we have to press the OK button twice (instead of once).
The first OK does a check/validate and then returns to the screen instead of proceeding when check is OK.
Has 7.4 introduced a new setting we have to adjust for this?
Or might this be a bug?
Thanx for your reactions.
Marco

Hi,
Regarding the variable screen button needs two click to execute, you will have to apply SP07 Patch 20 for only below 5 BI Java components for BI Java 740.
For BI Java 730 , SP12 Patch 10 will solve this issue
For BI Java 731, SP12 Patch 20 will solve this issue
This will solve your issue.
BI-BASE-B
BI-BASE-E
BI-BASE-S
BI-IBC
BIWEBAPP
Please make sure that you RESTART the Java server after applying the Patches.
Regards,
Amit

Double click select all does not work in web site's search area after going back.

After updating from Firefox ESR v24.8.1 to v31.20 double click select all does not work in a search area after going back or searching again with the same input. It happens before clicking search icon and searching for something else double click select all does not work except it works for one word that's all.
This issue is with all new Firefox ESR and None ESR I have tried. Also the issue is on all web sites like www.softpedia.com for example.

Bugzilla has a different login system, unfortunately.

Upgrade Web Basics from with a CS6/CC subscription

I have a CS6/CC subscription.
I have a website created in Muse that is hosted on BC using the Web Basics plan that is included in the the subscription.
I am considering upgrading to one of the paid for web plans but I cannot find a way of doing this from within my existing subscription. I have just wasted 20 minutes on Abobe Chat with a man who clearly didn't know the answer either, hence my asking the same question here.
Please advise.
Thanks
Graham

Hi Sidney and Alexandru
Thanks for your responses. However I am very surprised that the BC that provided as part of CS6/CC/Muse subscription is ring fenced from a BC subscription taken out seperately, there seems no business or technlogical logic for this.
At the very least I would like to be able to host email with BC for domains that I have used Muse to create websites for. And if I have clients who would like to use some of the more sophisticated elements of BC like eCommerce and Content Management then I would expect a seamless upgrade path within my current subscription.
I have a current issue with Cookeryclassics.com, I am finding it impossible to host email for this domain unless I either use Google Apps or apply for a seperate BC sub. I would rather do the latter if I could simply add a new service to my existing subscription.
Best
Graham

My MacBook Air (13" Mid 2012) 1.8 GHz, i5, 4 GB 1600 MHz DDR3 becomes sluggish, particularly web browsing after upgrading to yosemite from mavericks

my MacBook Air (13" Mid 2012) 1.8 GHz, i5, 4 GB 1600 MHz DDR3 becomes sluggish, particularly web browsing after upgrading to yosemite from mavericks

Mine is exactly the same machine and is working with any kind of problems.
Try to see this:
Clean space, make faster

Going live check service

hello all!
who knows the procedure of receiving "going live check session service" or something about the 'going live check '
Can anyone help me,or where i can find the document about it!
best regards.
zokii

SAP Going Live Analysis session is performed before start of major upgrade activities/migration etc. This pre session is performed before your task giving source system information and target system information and SAP runs the session based on that.
SAP Post GoLive analysis check is performed after your change and target system creation. Post session is to find out optimum settings for your system in terms of performance and other parameters or if you missed any specific settings etc.
You can request for both pre and post sessions via opening of message via SAP marketplace. They will send you a questionnaire to fill out with your system details. Once you send that sap will mark a date for the session in your system. You have to open remote connection/HTTP URL / WTS as required with login details to your system.
Regards,
Sandeep.

Power Mac G4 loses internet connection after going to sleep

Run down of computer: I have a Power Mac G4 tower, PANTHER OSX. I have wireless internet through our cable company—I use a wireless router. When I am connected to the internet, and browsing the web or something, if I let the computer go to sleep, it loses connection. I have to go back up to the little signal icon and reconnect to my wireless network.
I suspected it might be a setting through the router, but when my computer was comletely unplugged, and absent from the apartment, the other computer (G5 imac–TIGER) which was having the same problem, suddenly was staying connected even after going to sleep. When my computer came back home and was hooked back up, suddenly the other computer had the same problem again. So, I concluded that my G4 tower was the culprit, and perhaps not the router. We share a wirless network, so it's not surprising that this is the case.
I know there must be a setting somewhere in preferences or something that is telling the computer to disconnect from network when computer sleeps. I have looked everywhere, and can not figure it out.
It's really annoying to have to reconnect each time I use my computer. And just to reiterate, I get internet through a cable modem using my airport card, so please answer the question with this in mind as settings are totally different from dial-up. I do not use PPP.
Anyone experience this problem? Or know how to help?
Power Mac G4 Tower Mac OS X (10.3.4)
Power Mac G4 Tower Mac OS X (10.3.4)

Tried that too! Notta.
This one's really a pickle! Even the Mac specialist at my office was baffled! He suggested shortening the name of my computer...(Jamie Cendroski's computer)...I didn't really understand how this had anything to do with it...but he's supposed to be the expert. He also suggested trashing my keychains and making new ones. I messed around with them, but I don't know enough about this stuff to be bold enough to trash them yet. I'll do a little more research before I do so. I think he might be onto something with the keychains though..?

TDS Payment entry after Go-Live.

Dear All,
My client goes live on 01.04.2014. In their legacy system they used to pass entries related to TDS payment is like
TDS -- Party A --- 100.00
TDS -- Party B --- 200.00
TDS -- Party C ---- 300.00
to Bank a/c --- 600.00
From this they used to get report like vendor wise TDS payment in their legacy system.
Now my issue is how can I post this entry in SAP , where I can get Vendor wise TDS report. I know that if we will follow TDS cycle as per SAP standard then we can get the report from J1inmis. But here I have to make payment entries after go-live where I cannot follow TDS cycle for cut over entries/data.
So kindly guide me to handle this issue .
Regards
Soumya

Hi,
Please do following steps :
1. Go to transaction code J1INCHLN
Click on Execute
Enter
Click on Document - Simulate
If entry found O.K click on Save (Post)
Clearing document
Go to transaction code J1INBANK
Select appropriate Challan
Click on
Pre - requisites
1. Maintain number range for object J_1ICHLNNO in J1I9.
Hope, this solves your issue else revert.
Regards,
Tejas

How to keep Track of the Changes after Go live in OM

Hi Experts,
Need one information, after Go Live, PPOME is used by the end users for tracking or updating daily changes. While making he changes do we also need to keep a copy of the changes made in the Development server or it is fine if the changes are seen only in Production system.
If any body has made changes to the existing Organization and Staffing, how do we keep a track of who has done the changes is there any standard report through which we can get the information.
Please advice.
Regards,
Subbu

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

Upgrading to Web Basic+ after going live.

Similar Messages

Maybe you are looking for