Upload 3 year old legacy data into ECC

I need to upload legacy data (purchase orders/FI line items from accounting entries) of 2007/8/9 into ECC today through LSMW. Can i do this?Do I need to open posting periods of 2007/8/9. How to do that?
Does anything have to be done using MMPV or MMRV??

Hi,
No this is not possible/recommended. The recommended practice is to upload trial balance as on the cutover date.
It means...
1) If the cutover date is similar to year end, then only balance sheet items which are open items as on that date
2) If the cutover date is other than year end date, then all open items of balance sheet accounts and year to date balance of profit and loss account.
Best Regards,
Madhu

Similar Messages

Upload legacy data into SAP

Hi experts,
I have to upload legacy data into SAP by using eCATT recording Transaction. For doing this I have completed Test script in tcode SECATT. After this what I have to do.. How can I attach my legacy file.. Can anyone help me. ..Its really urgent
Thanks in advance

Hi,
There are a series of weblogs in this area. Check them out, I think there are 8 in a series:
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
cheers
Aveek

How to insert Legacy data into QP_RLTD_MODIFIERS table?

How to insert Legacy data into QP_RLTD_MODIFIERS table in R12 instance.

I would use the API QP_Modifiers_PUB.Process_Modifiers for pushing legacy pricing data into R12. QP_RLTD_MODIFIERS is only used for certain types of discounts (in my prod environnment, only promos have data in this table).

How to import legacy data into apex tables

Hi All,
Please tell me How to import legacy data into apex tables.
Thanks&Regards,
Raghu

SQL WorkshopUtilitiesData Workshop...
you can import the data from already exported as (text/csv/xml) data
Note: the table name and column name should be equal if the table already Existing table.

Asset depreciation calculation for prevous year when legacy data transfere

Hello,
Asset Legacy Data transfer has made as on 31.12.2006. so, for the first period asset depreciation calculation has done wrongly i.e. on the first period of 2007. but it was not noticed at that point of time, now after 2 years, the cumulative difference is coming out very big.
for 1st period, in Asset Value Tab of AS03, for period 01 , 2007 when i am checking right now it shows for dep. Area 01 right now that Amt to be post (14.48) instead of that in the next line for Dep. area 20 and in the next line it shows, Amt. to be posted ( -0.28). hence, for next period only differnce amount is posted in G/L side instead of actual it should be posted as 14.76.
so, now because of this error, my G/L and AA sides are not matching up.
eventhough i post manual reversal entry via FB01, when i will run ABST2 there will be problem.
if i run manual unplanned depreciation, then will my problem of not matching of Asset side and GL side will be solved. ?
also, please provide suggestion from your end in order to solve this issue.
Thanking you for your help.
Jigs.

We cannot post any depreciation to previous fiscal year 2008 as no planned depreciation is envisaged for the previous year 2008. The transfer date for Legacy asset data transfer is maintained as 12/31/2008 and takeover values are uploaded accordingly. Hence, 2009 is a first year for Asset Accounting of the company code.
However, Depreciation posting program checks for previous period log while executing for the current period. The logs are stored in u201CTABAu201D table. For new company code there will not be any entries in TABA table.
Due to missing functionality, System is checking for previous year depreciation posting logs even though the current fiscal year is first year for planned depreciation and giving error message AA 687.
As per SAP Note 144441 this error can be rectified with the help of correction program ZACORR_TABA_ENTRY_CREATE.
Steps to Rectify the Error:
1. Copy correction program from SAP Note 144441 into SAP System.
2. Execute the program with transaction code SA38
3. Check the values in test mode
4. If the table is updated with documennt number , remove the test mode tick and execute again
5. Execute the deprecation
Edited by: Ramesh Reddy Nalamada on Jul 25, 2009 1:17 AM

Old E2 data into new E2

How do I transfer ALL my data from my old Tungsten E2 into my new Tungsten E2 ??
I want all my scheduling info dating back 4 years, my address book, and my Laridian Bible program.
Thanks,
Herb Jones
Post relates to: Tungsten E2
This question was solved.
View Solution.

Hi, and welcome to the Palm Community Forums.
If your new E2 is brand new and never been synchronized before, just connect to the Hotsync cable, make sure you have the correct Hotsync ID selected in Palm Desktop, and synchronize.
If the new E2 is used, do a Hard Reset on it first, then Hostync as above. This article discusses the various types of Reset for different Palm devices:
http://tinyurl.com/zlwza
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Legacy data into new UCM Solution

we are implementing new UCM solution to one of my client,
Client is having lots of legacy data(>2TB), and they want to move the complete data into new UCM Solution?
My question is, what is the way to convert the whole data in to UCM Content server?

I assume that you are aware of the productised UCM Siebel integration...are you wanting to load legacy data and make it available through this? Even if you are the approach is much the same.
OK so if on a file system then what you need to do is work out how you can derive metadata either from the directory structure OR the Siebel DB or the content itself - those are in order of difficulty and time taken I would say.
The simplest thing to do is to use this information to create batchloader scripts. Why not try and create some test scripts where you load in 100 items or similar and see if the results/performance are aceptable.
It will take a long time to load 2TB of data - how many separate files is this? So you may need to devise a schedule for doing this in a number of smaller migration runs.
Tim

My Macbook is 5 years old (purchase date July 06). It suddenly broke down : the diagnostic by Apple is that I have to replace the Mother Board.

My Macbook is 5 years old (purchased July 06). It suddenly broke down. The diagnostic by Apple Store is : I must replace the Carte Mere (Mother Board ?). The repair cost is outrageous ( $800). I cannot afford it and do not accept it. IT tech is supposed to last longer than a mere FIVE years. Even if it is out of date after a year, a computer should not technically fail like that. That is what I cannot accept. Will Apple pay for it ?

Sorry I wasn't clearer ... in the case of an auto, agree that owner wear items/maintenance aren't relevant to the discussion ... what if the electronic dash, for example, dies in 5 years? Unless you have an extended warranty, the manufacturer isn't obligated to repair it for free.
It's unfortunate that the logic board has failed after 5 years, however, it does happen. It's not unusual for notebook hard drives to fail in 3 to 5 years, too. You can always ask Apple if they will repair it. at no charge.
As a related aside, if you do repair your Macbook, you should have a good hard drive backup routine, assuming that your hard drive is the original one. Since notebook drive failures in the 3-5 year timeframe aren't unusual, you've gotten good life from your drive, and you want to be prepared when it does stop working.

Uploading Files From VC (invoking RFC) into ECC

Hi Experts,
I have a requirement which consist of uploading files (from any PC) XML or PDF extension into ECC. I need to do this with a web UI. I got no experience with CE 7.1 (and above) and I just wonder if it is possible from CE 7.1 VC or CE 7.2 VC uploading files into ECC with an RFC development. Is there any uploading component available in VC 7.X which I am not aware of ???
Regards
David Cortes
Edited by: David Cortes on Dec 12, 2011 8:27 PM

Hi Nivas,
Thank you for your response. What I really want to know is ..... if CE 7.1 VC or above has a component for uploading files. My scenario is as follow.
SAP NetWeaver EP 7 (1 server)
ECC SAP invoice manage (1 server)
*Open Text - Invoice Content (1 server)
My requirement is to built a Web User Interface Portal for uploading files (from any computer) and save it into ECC and OpenText Server. I would like to do this with VC but there is no any component for uploading files (not available in NetWeaver 7).
I do not know if it is a component for uploading files available in CE 7.1 VC or higher and I really would like to know and request for this installation.
Regards
David Cortes

Loading Old RMS data into Retail Analytics

Hi,
We are implementing Oracle Retail Analytics much after implementation of RMS.
Can some one please tell me that how we can load all the old fact data like sales, inventory, promotion, pricing, on-order etc.
Regards,
Aniket

Hi Anoop,
You can run a Repair full request on the cube.Give the selection condition and do a repair full loading.
Thanks,
Ravi

Getting old LiveType data into new LiveType

I had the LiveType that came with Final Cut Express 1. Now I have the newest version and none of the old livefonts etc show in the media manager. I've looked about online and to my surprise can not find any information on this. The manual mentioned something about an install/uninstall button on the lower left window of the media manager but the only two buttons in the lower left are grayed out and unclickable. The data was installed before the upgrade and was reinstalled afterwards- no luck. All the files from the original install are AFD format.
Any assistance is greatly appreciated! I need the Sunflower livefont to work for a project I'm carrying over from the old version! EEK!

An hour on the phone with tech support and we figured it out. Appears when upgrading (at least on my system) the old LiveType data folders were OVERWRITTEN. The livetype data folder in LiveType Application Support was there, but the font, object, etc folders were replaced. Reinstalling the old data DVDs does nothing. You have to move the original folders (for example the Pro Series folder) and rename it (to something like "Old Pro Series") then put it back in the appropriate place after the upgrade is done. Now I have all my old livefonts working just fine
Hopefully a fix will come out for this as I know I'm not the only person who has had this problem.

Open items yet to be cleared which have 2-3 years old document date

Sap Experts,
This is my first post and would like to ask for a help .
I would like to clear all the open items which have Zero balance and belongs to Fiscal year 2007, 2008, 2009, 2010.
In F-04 T.code, When I put the document date, it does not allow me to clear it.
Please give me the best solution you think of any other alternative which is right or please provide me with steps to clear by using F-04
Your help will be greatly appreciated.
Kind regards
LSD

Thanks Atif & Sanil for your quick reply,
But the problem is when I enter the GL account, it is giving me error, stating that "there are no open items managed in Account XXXXXXXXXX". I have checked the control data in FS00 and only Line item Display is ticked.
I have recently joined this place, and the items are open from the day SAP was implemented. So they do not use Auto clearing.
Some points I am thinking below,
Q1. Does it mean that the control data must have open item to be "ticked"?
Q2. The A/c i am trying to clear is Non-current Trade receivables, so can we clear such accounts.
In terms of Clearing the data from 2007 till date,
Q3. Do I have to open the old periods or can I clear in current period.
Further info will be very helpful.
Cheers

Using sqlldr to load old UNIFY data into oracle 11g

I have a dump of an old UNIFY database whitch I need to build a controlfile to import to oracle using sql loader.
the main problem is that the file is containing records for 64 tables
the dumpfile is starting with the name of the table, and then data for each column in that table. like this:
RSLT|0|26/09/2005|1281|2|LD|S1|0|0| 223|223.000000|Centra|27/09/2005|10:13|Centra|27/09/2005|10:13|3|0|3984|180|24069844193|379650048|247075485|134233305|0|
SMPL|0|26/09/2005|1281|3||5|ALLE|2|1|177|0||26/09/2005|**:**|svi2|||**/**/****|**:**||0||0|0|**/**/****|00:01||286138573|2560|
I have build the ny datamodel in oracle, and it is the same as in the old UNIFY system. so that is not a problem.
but HOW do I tell sqlldr that there is not data from just one table but 64..??
the tablenames and how to difference them is the main problem..
This is an urgent issue.. I need helt fast.
any suggestions?

Hi,
You can do something like that
--- Control file--------------
cat aa.ctl
LOAD DATA
INFILE '/home/oracle/MYSHELL/aa.txt'
TRUNCATE
INTO TABLE RSLT
WHEN DBNAME = 'RSLT'
FIELDS TERMINATED BY '|'
DBNAME,
col_1,
col_2,
col_3,
col_4
INTO TABLE SMPL
WHEN DBNAME = 'SMPL'
FIELDS TERMINATED BY '|'
DBNAME position(1),
col_1,
col_2,
col_3,
col_4
-- dat file----------
cat aa.txt
RSLT|0|26/09/2005|1281|2
SMPL|0|26/09/2005|1281|3
SQL> host sqlldr me/** control=aa.ctl
SQL*Loader: Release 11.2.0.2.0 - Production on Wed Aug 14 02:15:37 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Commit point reached - logical record count 2
SQL> select * from SMPL;
DBNAME     COL_1      COL_2                COL_3      COL_4
SMPL       0          26/09/2005           1281       3
SQL> select * from RSLT;
DBNAME     COL_1      COL_2                COL_3      COL_4
RSLT       0          26/09/2005           1281       2
HTH

Determine 3 year old fiscal date from today's date

I have a requirement where I need to find fiscal date from current calendar month/getdate. Our fiscal year starts from October and ends on Sept30. Also, I only want what will be fiscal date which is older than 36 fiscal month from todays date.
For example:
If I calculate today It should return like that:
Oct 2014 - Feb 2015 = 5months
Oct 2013 - Sept30 2014 = 12months
Oct 2012 - Sept30 2013 = 12months
March 2011 - Sept30 2012 = 7months
Total #fiscal months=36 or 3 fiscal years
Resultset should look like that:
'2011-03-09'
Thanks in advance!
ZK

For the first of your request, meaning getting difference between Specific month and either first day of fiscal year or last day of fiscal year, you can use a table that will hold your fiscal year information and a query like below:
DECLARE @UserRequestedDate DATE
DECLARE @FiscalInfo TABLE (FiscalYear SMALLINT, StartDate DATE, EndDate DATE)
INSERT INTO @FiscalInfo
SELECT 2010, '10/01/2009', '09/30/2010' UNION ALL
SELECT 2011, '10/01/2010', '09/30/2011' UNION ALL
SELECT 2012, '10/01/2011', '09/30/2012' UNION ALL
SELECT 2013, '10/01/2012', '09/30/2013' UNION ALL
SELECT 2014, '10/01/2013', '09/30/2014' UNION ALL
SELECT 2015, '10/01/2014', '09/30/2015'
SELECT
,@UserRequestedDate
,DATEDIFF(MONTH, StartDate, @UserRequestedDate) + 1 AS MonthsPassedFromFiscalYear
,DATEDIFF(MONTH, @UserRequestedDate, EndDate) + 1 AS MonthsPassedFromFiscalYear
FROM
@FiscalInfo
WHERE
@UserRequestedDate BETWEEN StartDate AND EndDate
Which with your samples would be:
SET @UserRequestedDate = CURRENT_TIMESTAMP
SELECT
,@UserRequestedDate
,DATEDIFF(MONTH, StartDate, @UserRequestedDate) + 1 AS MonthsPassedFromFiscalYear
,DATEDIFF(MONTH, @UserRequestedDate, EndDate) + 1 AS MonthsPassedFromFiscalYear
FROM
@FiscalInfo
WHERE
@UserRequestedDate BETWEEN StartDate AND EndDate
SET @UserRequestedDate = '03/01/2011'
SELECT
,@UserRequestedDate
,DATEDIFF(MONTH, StartDate, @UserRequestedDate) + 1 AS MonthsPassedFromFiscalYear
,DATEDIFF(MONTH, @UserRequestedDate, EndDate) + 1 AS MonthsPassedFromFiscalYear
FROM
@FiscalInfo
WHERE
@UserRequestedDate BETWEEN StartDate AND EndDate
And output would be:
FiscalYear StartDate
EndDate (No column name)
MonthsPassedFromFiscalYear
MonthsPassedFromFiscalYear
2015 2014-10-01
2015-09-30
2015-02-09 5
8
FiscalYear StartDate
EndDate (No column name)
MonthsPassedFromFiscalYear
MonthsPassedFromFiscalYear
2011 2010-10-01
2011-09-30
2011-03-01 6
7
And for your second request, something like below may help you
DECLARE @UserRequestedMonthNo TINYINT = 36
SELECT DATEADD(MONTH, 1, DATEADD(MONTH, @UserRequestedMonthNo * (-1), CURRENT_TIMESTAMP))
Best Wishes, Arbi; Please vote if you find this posting was helpful or Mark it as answered.

I need to get my old calendar data into my new calendar on my new MacBook Pro without erasing what is in there now, anyone know how to do it?

I do not have access to my old computer (can boot in safe mode, other wise nothing on the screen, even with an external monitor) to export the old calendars. I have the old calendar files on my new computer. The titles of the old calendars are in the sidebar of the new calendar app but none of the old events are there. I must not have set up correctly initially. I was using OS X Snow Leopard 10.6.8 previously and now use Yosemite 10.10.2 both computers are Mac Book Pros, the new one is the mid 2014 15" Retina.

Hi Linc, I started setting up my new computer a few months ago so don't remember the details. I did not use migration assistant, nor do I wish to, I believe it was set up through icloud. Now that I needed my calendar while doing taxes I discover there are no events for 2014 and earlier (except 2 oddly enough). I do remember that iCloud instructions were not clear as to what would happen in the choices it gave.
I copied my old user files over from my external back up after my old computer stopped working, was hoping I could put ical folders in the right place to be used by Calendar or import somehow.

Upload 3 year old legacy data into ECC

Similar Messages

Maybe you are looking for