Upload of chellan details, getting only two months

Hi SAP Gurus
We have been traing to upload the chellana details. all most employees are getting chellan details in form 16 except two three employees. here we find that which ever TDS is reflecting in F24 for those months details we are getting. pls suggest me its an urgent issue. this is going to escalete. pls suggest.
Regards
Suresh

done

Similar Messages

I bought apple iPad on this July , it's been only two months but now I'm getting a problem like no wifi it's greyed out sometimes and showing no wifi... Please help I'm frustrated on this , did they provided me a fault device ??

I bought apple iPad on this July , it's been only two months but now I'm getting a problem like no wifi it's greyed out sometimes and showing no wifi... Please help I'm frustrated on this , did they provided me a fault device ??

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I bought lightroom five only two months ago. now lightroom 6, there is a free version o something as a discount? tks, i bought lightroom five only two months ago. now lightroom 6, there is a free version o something as a discount? tks

there is a free issue for how buy only two months before?

No special grace period has been announced so far.
Your can get an update for about 80 bucks only.
On the bottom of the Adobe webpage select products, scroll down to LR and click on buy.

My internet's really slow and it's only two months old.

My internet was pretty fast, and now it's really slow, i don't know if it's because of my wifi or what. But i had downloaded lots of tv show videos and I am thinking that it's happened because of that. But i think if i do delete the videos for good, my internet would still stay the same. So i think it wont make a difference if i do delete it, should i or not? and what should i do about my internet??
It's only two months old!!!

Care to share which OS you are using?
How large is you HD and how much space do you have left?
Check w/your ISP. Make sure the problem is not on their end.
User Tip: Why is my computer slow?
What to do when your computer is too slow
Speeding up your Mac

How to get only two digits after decimal point of an expression

i am doing simple multiplication between two float numbers.
both the numbers have two digits after decimal point.
so naturally the result will have 4 digits after decimal point.
i want to get only two digits after decimal point.
help me please...

If you just want to limit the displayed decimal places, you can do the following...
import java.text.*;
public class Formatting {
    public static void main(String[] args) {
        NumberFormat format = NumberFormat.getNumberInstance();
        format.setMaximumFractionDigits(2); //what you seem to want
        format.setMinimumFractionDigits(2); //if you always want at least 2 digits displayed
        System.out.println(format.format(12.345));
        System.out.println(format.format(12.0));

Without a receipt, but with a bank statement, will I be able to get a free replacement on my broken iPod headphones, bought only two months ago?

Hi,
I bought a new pair of iPod headphones just over two months ago from an HMV store, and in the last few days, one of the headphones has stopped working altogether. Unfortunately, I no longer have the receipt for the headphones, but I do have the information booklet, the one year warranty statement and a bank statement showing the transaction of when I purchased the headphones. Am I still able to get a refund or replacement for my headphones, as the damage was not my fault, just a technical fault?
Thanking you in advance,
Natasha

Am I still able to get a refund or replacement for my headphones, as the damage was not my fault, just a technical fault?
Yes. Make a trip to your local Apple Store and show them what is going on. Since the headset is still under a year old, they should swap it out for you at no cost. Unless for some reason they deem the issue the result of misuse or abuse, but that doesn't sound like the case here.
B-rock

Project Server 2013 - Out of Office Sync - Only two months in future?!?

Hello there guys,
after Long Long search for the problem, I've found out that our Project Server 2013 only syncs the out of Office time from our Exchange Calendar for the next two months.
But for our Project planning we Need of course a more longtime synchronization, at least 6 or better 12 months.
I didnt find any Option where I could set it to sync more then 2 months of the out of Office times in the calendars.
I've spent already so much time on this Problem... When I set the Project Server time 2 weeks(!) in the future, then the sync will also sync two more weeks in the future, but not more.
The timesheet periods are also set for the next 12 month.
Does anybody have an Information/help regarding this Problem for me?
How can I set the Out of Office sync to synchronize more then just 2 months?
THANK YOU VERY MUCh!!
Regards
Lukas Meyer
PS: Using the current October 2013 CU.

I've searched the Verbose Log and found the following:
12/17/2013 14:38:16.32 Microsoft.Office.Project.Server (0x0928) 0x1A6C Project Server Exchange Sync aaubf Verbose PWA:https://servername/PWA, ServiceApp:Project Server-Dienstanwendung, User:PROJECTSERVER\system,
PSI: Calling service.GetUserAvailability() for user:2c3909bc-d6fb-e211-b239-000c296be823 for period:12/17/2013 00:00:00-02/17/2014 00:00:00, LogLevelManager Warning-ulsID:0x00014045 has no entities explicitly specified. 3a2f619c-f4a0-f018-b62b-b2d1299a489f
So the Project Server is only asking for two months of User Availability on the Exchange. Where can I Change this Setting so that the Project Server syncs more then 2 months?
Otherwise this functionality is quite useless in my view as we are planning our Projects longer then only 2 months...
Thank you!

Cancelling with only two months left to go... or s...

Having taken out an 18 month contract in 2012 (Nov) We were happy BT users.
In august 2013 we moved house - taking our broadband with us. All went smoothly.
The landlord has decided the sell the property we live in meaning that two months before the contract is due for renewal we're moving out.
We're moving back in with the parents whilst we look for another place to live. Unfortunately upon ringing BT to discuss possible solutions I am told that it'll cost £170 to cancel early...
I ask whether its possible to wait for the extra two months but cancel my line rental and simply pay the remainder of broadband and phone usage. To which I am told that by moving house I have extended my contract length - at no point during my calls with BT was I made aware of this. When I asked why the answer i received was because a new phoneline was installed at the property. There was an existing phoneline at the property, which was BT and again no one at BT ever suggested otherwise.
I am happy to pay the two months worth of internet useage etc £27pcm until my contract is up but what I don't understand is why and how they have extended my contract without sending me revised agreements or even discussing this with me.
I am more than happy to compramise or at least speak to someone with the authority to compramise with me. I'm astounded by how difficult this is especially as BT own the majority if not the entire intrastructure of the area if not the UK.
My issue is that when we move into our new address (date unknown) we would've continued to use BT and probably extended the contract to BT TV too, however it seems that BT don't seem to worry about brand loyalty or future earnings.

UPDATE,
After numerous calls with BT to actually descipher when my 'contractual obligations' terminate with them I have been given several dates. its seems that no one is actually sure when my contract ends with them!?
I spoke with customer care this afternoon 1:30ish and I had a very helpful woman deal with me. She was incredibly paitient and when I asked her at what point I had been made aware of my contract extension she couldn't tell me. The only corrispondance I had recieved was an email saying that my service was working...
She also agreed that it sounded odd that I would cancel a 18month contract and take another one out for no gain in performance or benefit.
Looking around online it seems that this is common with BT and there are several cases whereby their terms and conditions do not hold up.
I really wish what few moderators there are on this site (i'm really surprised that BT don't dedicate more people to this place) will be able to assist me some how.
Otherwise I'm waiting on Lindsey Jones (sp) to call me...
my issue with all of this is that at no point has anyone told me explicitly that by altering any service with BT i therefore extend my contract length with them.
It is all very well citing 'terms and conditions' BUT something as serious and costly as extending contract lengths should not be hidden away. the company has a duty of care to inform the customer that above all else.
I have asked for a copy of recordings to be sent to me under the freedom of information act, however I was promised an email with the correct form today - so far nothing has turned up...

HT1349 My ipod touch 4th gen, will not let me access facebook or you tube it just takes ages to load then fails. I have reset the ipod but its still doing the same. Its only two months old, does anyone know how to fix it?

My sons ipod touch has stopped letting him access facebook or you tube. On entering the app or going in via safari it just states loading for ages then fails, I have reset it for him, but it hasn't helped. Is this a common problem? It is only 2 months old.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
also
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT4098 i paid 14.99 usd for one month but i get only one month how can i acces again

hai
ipaid for yalo 14.99usd thats for one month unlimited freecall but now only 10 days my account is suspended
why my account has suspended?

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple, we won't know.
Do you mean that you iTunes account is disabled ? If you do then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'. You might then need to log out and back into your account on your phone.
Or that your account with that app is 'suspended' ? If you do then have you contacted the app's developer ?

FM to get only Previous Month

Hi All,
        I need to calculate the average billing doc from this fiscal year .
But My user is also calucaltaing the number of billing doc created in last previous month as well as also the average billing doc per month from the document type.
So is there any function module which can calculate the previous month from the sy-datum.
Moderator message: date calculation questions = FAQ, please search before posting.
locked by: Thomas Zloch on Sep 29, 2010 1:20 PM

Hi,
Use the FM: RP_CALC_DATE_IN_INTERVAL
DATA:date1 TYPE sy-datum.
START-OF-SELECTION.
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
    EXPORTING
      date      = sy-datum
      days      = '00'
      months    = '04'
      signum    = '-'
      years     = '00'
    IMPORTING
      calc_date = date1.
WRITE date1.

FURIOUS! refurbished replacement, only 5 months down the line, LCD is broken. Sales Of Goods Act, i want the years warranty i paid for not 90 days, AM I BEING UNREASONABLE?!?!

Paid £120 for a replacement iPhone 3GS 16GB White around 6 months ago, ONLY TWO MONTHS afterwards it seemed to think it was stuck on a docking station, so I got another replacement as it was virtually unusable! Of course I got scammed, and was given a refurbished unit, instead of another new one, after paying £120 as a student for a new one to avoid any further issues! I CANNOT afford a new phone and I am FURIOUS that I may not have the years warranty I practically paid for by buying a new unit that only worked to its full functionality for 2 MONTHS, to get a replacement with only 90 days warranty, how is that right? NOT ONLY SHOULD I GET A BRAND NEW REPLACEMENT AGAIN BUT I SHOULD ALSO HAVE MY YEARS WARRANTY I AM MOST CERTAINLY ENTITLED TO!
Personally I think this is an outrage, and I believe I am entitled to the years warranty I paid for, and a replacement now as my 5-6 month iPhone's LCD has decided to completely pack in possibly costing me £30 for a new, none-genuine LCD that I would have to trust myself to replace.
I deserve my full warranty, I feel like I have been scammed by a huge company that couldn't care less whether their products reach the customer with the sales of goods act i'm mind at all.
I think this is an outrage, and hope to be reassured by somebody on here.
thank you for taking the time to read my post,
yours sincerely, Olly.

thank you for your reply! I hope you are accurate in what you are saying, I have not voided my warranty in any way, the iPhone I paid for had a fault that meant, for some reason not only did it think it was constantly on a docking station, meaning the speakers nor the volume would work, but it would overheat when charging, this was nothing that I did to the iPhone.
so in that case I am still covered by the years warranty?
this is great if I am, although I thought all refurbished replacements only had a 90 day warranty. so if you need a replacement, you've only got 90 days for a component to break in order to get a replacement, which I think is unfair in every way as a refurbished replacement is even more likely to go wrong, not only that but it is more likely to go wrong in a smaller amount of time too!

Need only two decimal places, but BigDecimal isn't working

Hello again. This time I've got a problem with getting only two decimal places. I tried using BigDecimal but when I compile it, I get an error "cannot find symbol class BigDecimal" and a "cannot find symbol variable BigDecimal".
Grrr... I just want my value to have only 2 decimal places before it ends up in my text field.
Any help will be appreciated.
- Phonse
if (ostuff1.equals("amt tendered"))
                 finalamt = total1 * 1.12;
                 change = cash1 - finalamt;
           BigDecimal finalamt2 = new BigDecimal(finalamt);
              finalamt2 = finalamt2.setScale(2, BigDecimal.ROUND_DOWN);
              BigDecimal change2 = new BigDecimal(change);
              change2 = change2.setScale(2, BigDecimal.ROUND_DOWN);
              finalamt = doubleValue(finalamt2);
              change = doubleValue(change2);
                 addItem(String.format("Amount Tendered:          "+"P "+finalamt));
                 addItem(String.format("Change:                     "+"P "+change));
               }

@ georgemc
Isn't it better to import whole packages instead so
you can have everything available when you call them?
I mean, it's kinda hard to import individual classes
everytime you need to call them.No. You can get conflicts when importing complete packages. If you importjava.awt.*;
java.util.*;and then declareList list;the compiler does not know which List you meant, java.util.List or java.awt.List.
Offtopic @ prometheuzz
LOL. When I was a kid still playing my Playstation I
wanted to have a career in computers when I got to
college. Now I'm 14 and a 3rd year high school
student and I just got a reality check -- computers
just isn't for me. And alot of those professionals
say Java is the "easiest" programming language. O_O
Meh. I'll just follow my other dream of becoming a
chef. Just seems like my parents won't like it...
Bleh... Two more years... Two more years...Sure, but if you like programming, work (hard) for it. Most people have to work hard in order to become good at something, no one is born as a programmer. This goes for becoming a chef as well.

My macbook air does not turn on i did try the sugestions of previous queries but all i can achieve is turning what i assume are the fans.still the screen is dead, although i have my macbook since christmas ,i only been using it for two months .

i have only been using my macbook for the last two months,yesterday before turning it off ,or shutting it down i revised the batterie charge and it had 97% charge so i shut the computer with the apple icon and shut computer off . four hours later could not turn it on , i read previous entries on the isue and there was a sucseful result ... i believe the first idea was to press power switch for five seconds unpluging it previously from the wall ,and try after ? did it two times ,but nothing, then on the prosses of resseting the cistem..SSsomething ,it mention pressing control and something else at same time ,to force quit anything that might be still running ( i notice then that the fans or the fan was making a noice.then press power for ten seconds and i could heard the fans off . i tried two times the reset option especific for the mac air with non remomable batteries ,but it still does not turn on ... i am very fustrated as the last two months have been very painful ,for i am very much a mac starter and at my age learning does not came easy ,and just as i am getting to enjoy the diference ... dead new toy . can someone please advise? but regardless of .thank you . is unfortunate approching this community because of a need , but at the same time glad to know there is more than a shop assistant out there .thank you all .

I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

I get a message the message " Can not get mail. Not connected to server" Yet I am connected with Wi-fi and can access all other websites. Can you advise? My iPad is only a month old!

Has any one experienced not being able to send mail and only receiving some? I get the message " can not get mail. No connection to the server! " Yet I get some mail but can not send out any. My iPad is only 1 month old! It worked perfectly for about 10 days.
Thx
Agnes

Hey agnesfromcopenhagen k,
Thanks for the question. I understand you are experiencing issues with Mail on your iPad. The following resource provides some troubleshooting steps. What kind of account are you using? Some internet providers require that you be connected to your home Wi-Fi (or for work accounts, inside your corporate Wi-Fi/firewall). Also, some email accounts require two-step authentication. For more information, see this resource:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M.

Upload of chellan details, getting only two months

Similar Messages

Maybe you are looking for