Upload through FTP, wheres my files?

ive made a website on ilife 08 and went to fetch to upload it to my hosting service, I can not find where iweb saved my files! anyone know what I can do? thanks

I figured it out, I forgot to publish to a folder!

Similar Messages

Using tie-classed to change name of file uploaded through FTP protocol srvr

Hi,
I'm trying to use the extendedPreAddItem (or Post) method in an S_TieFolder class to automatically change the name of a file (an S_PublicObject) when it enters a Folder (via an FTP put upload).
I'm fiddling around with code like this:
AttributeValue val = AttributeValue.newAttributeValue(newDocName);
val.setName(Document.NAME_ATTRIBUTE);
rightpo.setAttribute(val);
But it does not work: in the FTP client the filename is indeed changed, but somewhere at lower levels the original filename is still being used...
Any helpfull ideas would be appreciated.
TOon

I'm aware of this... My ftp-client (FTP-Voyager) will prompt me if I "put" a file that already exists in the remote folder, and ask me to go ahead and replace the file, or cancel the put-operation.
However in this case the ftp-client sees file X' remotely and I'm putting file X, so it does not prompt me at all...
Stopping and restarting the FTP-client (in case it caches remote folder-contents...) does not change the behaviour.
Timewise this is what happens:
1) I put file X.
2) My S_TieFolder class (extendedPreAddItem) changes it's name into X'.
3) The ftp-put successfully completes
4) I refresh the remote folder contents and see the X' name instead of the original X name.
5) I re-put X (and would now like to have it changed into file X'').
6) Before my S_TieFolder code executes, something (I'm still suspecting the cm-sdk) deletes the X' file first... ==> the logfile does not show any communication with the ftp-client here now.
7) Then my S_TieFolder code executes and changes the name into X''.
8) I refresh the remote folder contents: File X' disappears, file X (just re-put) changes into X''.
More testing has shown that I'm also not able to delete these files (whose names have been changed by S_TieFolder): 'file does not exist' error.
I need to know:
a) If changing the files name on-the-fly using S_Tie class is supported at all.
and
b) if so, what am I doing wrong?
Thanks
Toon

Can I Use Dreamwever Site manager with Edge Code? Or at least have the ability to upload through FTP

Hi There
I develop all day in Dreameaver CC.
I Use DW Site manager to upload files to the site.
Unfortunately - DW code view is really laggy recently and it's really hard to work with.
I wonder whether I can use Edge code on a live site so I can upload my files to an online site like I do with DW site manager.
Thanks A LOT
Guy Lev
Adobe ACE, ACI
IDUG chapter representative
Israel

There's no integration between the 2 programs, but you should be able to use them at the same time. Be careful to:
1. Save all of your files in EC before jumping to DW to use FTP
2. Don't edit any files in a EC that are being FTPed by DW
Randy

Is it possible to upload large files through FTP to server with iWeb?

Is it possible to upload large files through FTP to server with iWeb like for example with Cyberduck?
I don't need to publish website with files, I just need to upload files on server. Can it be done somehow with iWeb?

Here's some info about FTP...
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
Make sure you are allowed to store files on your server. Most hosting services don't allow anything to be stored that can't be accessed via the internet. Check the fine print!

Issue in Flat File load through FTP set up

Hi All,
I am trying to load the flat file using FTP set up ( through process chain ).
I put a file in the FTP server, the file is being picked up from the FTP server but I cannt see the same in Interface file manager (ZIFM) under unfinished or comleted jobs.
I am not able to understand where is the eror?
any suggestion for this would be of great help.
regards
Amol
Edited by: Amol Jaiswal on Nov 8, 2008 12:33 PM

i don't get you.
You are trying to FTP a file to your application server in your process chain; is that correct?
Marco

Flat file upload through BPS webinterface

Hi ,
I want to load a flat file ( format in CSV) through web upload into a master data infoobject.
that is i want to upload through BPS webinterface . (3.5 version)
Is it possible to write everything in a BSP application without the help of Planning level or layout or functions.
but only through webinterface and a BSP application and can abap coding be included in directly in .htm page.
kindly help me out.

Hi,
I don't think so you 'll be able to write the abap code directly in htm page.Web interfaces are used for the purpose of creating and using user interface .It is no where linked to the logic or the activity that has to be performed using abap code directly.
You have to use the planning level and planning function for uploading the data through flat file.You can check the How to guide in forum's.
You can also create Transaction code for uploading the master data,through abap code you can provide buttons to upload it.
Regards,
Indu

Uploding file through FTP

Hi
How can i upload file and download file through FTP server .is any body has some sample code.pls help me
Thanks!!

I think there one undocumented sun.net.ftp
U can try with that pkg...Better yet, don't.
Why Developers Should Not Write Programs That Call 'sun' Packages
http://java.sun.com/products/jdk/faq/faq-sun-packages.htmlI recommend the Jakarta Commons Net package...
http://jakarta.apache.org/commons/net/

I cant upload through muse's uploaed to ftp host. And it is so slow! I have the correct password, ftp server, and user name frustrating!!

I cant upload through muse's uploaed to ftp host. And it is so slow! I have the correct password, ftp server, and user name frustrating!!

What version of Muse are you using? If it's not 2014.2, please go to the Creative Cloud Desktop App or creative.adobe.com and update.
The FTP login failure is most likely due to your host not supporting FTP Extended Passive Mode. In Muse 2014.2 switch to "Passive (PASV)" in the Connect to FTP Server dialog.
Regarding performance, how large is your site (in pages and megabytes)? How many Design view tabs are open? What specific operations are slow?
If you'd like to send your .muse file, I'll take a look and attempt to isolate the cause of slow performance. Please send me the .muse file at [email protected] along with a link to this thread. If the file is larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. Thanks.

Dreamweaver CS6 - FTP changing my file permissions on upload???

ORIGINAL POST: SEPT 19, 2012 http://forums.adobe.com/message/4784335#4784335
Upgraded to cs6. All programs work perfect for me exceopt Dreamweaver.
I have never expierenced this challenge however no matter what file(s) I upload dreamwever is chanign the file permissions.
For instance if I upload an image to the sever the image won't appear. I check permissions and they are set to 0. Same with files.
I have to now go in to each item I upload and change permissions to 644 or 755 depending if its a file or directory.
This is a Dreamweaver exclusive problem as it does not happen when I use Filezilla and Im working on 6 different servers.
ONLY when I upload files with Dreamweaver CS6 do the file permissions change on upload. Cs5.5 no problem.
Any ideas?
Aloha!
STILL NOT WORKING UPDATE:
I was even on with India Adobe support doing a screen share and they watched in real time as I uploaded a file and Dreamweaver and it changed the permissions to 000. You can 'Get' a file with 775 permissions then 'Put' that same file and it will chanve to 000 permissions.
Support failed to address this problem after 30 days and never called back.
STILL NOT WORKING UPDATE: Changing ro SFTP seems to be a workaround.
See Full Discussion here as I posted in the wrong area. http://forums.adobe.com/message/4784335#4784335

I'm using DW6 version 12.2, and this problem is still happening.
The permissions are defaulting to 0664, where I need them to be 0644. Every time I create a new file, it defaults to 0664, and I'm unable (not permitted) to view that file online until I go in, using another FTP program, and change the permissions to 0644... or manually go in the slow-poke way using DW6 Remote View -> [file name] -> Set Permissions.
Too bad there's no way to configure this in the Preferences area of DW6.

How to put file from a legacy system to SAP through FTP

Hi
I want to put one file which will be comming from legacy system to a folder of application server of the SAP system through xi.The protocol i want to use is FTP.
But im not sure about the configuration to be done for putting the file directly to SAP app server.
Anybody having idea what configuration i need to do in the SAP side to put the file into the app server directly through FTP.
Thanks
Debraj

Hi Debraj,
Try if these links help you solve your problem:
http://help.sap.com/saphelp_bw31/helpdata/en/4e/2ba038b81e897ce10000009b38f8cf/content.htm
http://www.sapfans.com/sapfans/saptips.htm#prog
http://help.sap.com/saphelp_nw04/helpdata/en/a4/db833d4c47ea4ea1a9b7af3c535ff2/content.htm
Cheers,
Chandra

File has to pass through FTPS connection.. Connection parameters?

Hi,
I want to transfer the file through FTPS connection. Partner side provided the following details as connection parameters.
- IP : 129.32.169.140
- POrt: 990
User name
Password
PASV mode
SSL Direct, OpenSSL,SSL Listing, SSL Transfers.
Kindly let me know what are all the parameters I need to pass in Receiver file adapter.
FTP Connection Parameters:
Server
Port
Data connection: Passive
Connection Security: FTPS for control connection or FTPS for control and Data connection.???
Command Order : ?????
Please let me know what are the security and command order parameters I need to use in Receiver file adapter.
They didn't provide any certificates.
Thanks
Deepthi.

Hi Rajesh,
The message is not even failing.. It is in the status of "Delivering". The below are the logs from adapter and Messaging system.
File Adapter Log:
Success   Message successfully received by messaging system. Profile: XI URL: http://xi-dev.intranet.XI.com.au:50200/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
Success Message successfully put into the queue.
Success The message was successfully retrieved from the receive queue.
messaging system log:
Message ID 44b756da-d9bd-42e2-3136-e34d75adfe03
Message Type Asynchronously Received Message (RECEIVE)
From Service   Name: BS_1
To Service   Name: BS2
Action   Namespace http://XI.com/SAP_PI/ControlData Name: BYPASS
Connection Name   File_http://sap.com/xi/XI/System
Status   Delivering
Error Category
Error Code
Profile   XI
Transport   HTTP
Delivery Semantics   Exactly Once
Times Failed   0
Number of Retries   3
Sent / Received 09/09/2009 11:22:52
Transmitted / Delivered 09/09/2009 11:22:53
Next Delivery 09/09/2009 11:22:53
Persist Until 10/09/2009 11:22:52
Valid Until 01/01/1970 10:00:00
Retry Interval   5 Minutes
Address   http://xi-dev.intranet.XI.com.au:50200/MessagingSystem/receive/AFW/XI
Transport Headers   authorization=Basic UElJU1VTRVI6dDFhbTRyaWE= Content-Length=3010 accept-encoding=gzip sap-xi-messageid=44B756DAD9BD42E23136E34D75ADFE03 content-length=3024 host=xi-dev.intranet.XI.com.au:50200 user-agent=SAP Web Application Server (1.0;700) content-type=multipart/related;boundary=SAP_4AA4E14330050131E10080000A722149_END;type="text/xml";start="" HTTP=POST soapaction="http://sap.com/xi/XI/Message/30"
Principal Propagation

Steps for File Transfer through FTPS...!!!

Hi ,
Can anyone please tell the steps for file transfer with FTPS.
Does PI file adapter has bulilt in feauture to handle this? or
Do we need to deploy anything to handle this?
Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
Please suggest me.
Thanks
Krupakar

Hi Shabarish,
We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
Ip: XXX.YY.YY.ZZZ
Port: 990
User and pwd.
and I am getting the same below error
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
I tried by selecting different options like
1. Without selecting the X509 certificate for client authentication.
2. Keystore as TRUSTED\view\entry-cert
X509 certificate and private key as TRUSTED\view\entry-cert
3. Keystore as TRUSTED\view
X509 certificate and private key as TRUSTED\entry-cert
4.Keystore as "view"
X509 certificate and private key as "entry-cert"
Please help me in this.
Thanks
Krupakar

How do I get rid of the Not Using SoftArtisan File UP notice that is slowing down my uploads to class where I teach?

How do I get rid of the Not Using SoftArtisan File UP notice that is slowing down my uploads to class where I teach? A notice now appears every time I upload an image to class as an attachment that says, Not Using SoftArtisan File UP, and this appears to be slowing down my uploads tremendously. I want to get rid of this. I never used it before and don't need it and don't want it. I just want the uploads to work like they did before this idiotic notice started slowing things down.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Can anyone help me in sending a file through FTP

i have written a program to transfer files or directories in zipformat through FTP.i have also installed filezella server to check whether it is working or not.i have connected to filezella server but i am not able to send file.can any one send the code for sending the file.
i have also tried the jakarta api sendfile ().but in that i don't what is mode means.
for your reference i am sending the code as far developed.
import java.io.*;
import java.util.*;
import java.util.zip.*;
import java.io.FileInputStream;
import java.io.IOException;
import java.util.zip.ZipEntry;
import java.util.zip.ZipInputStream;
import org.apache.commons.net.ftp.*;
import org.apache.commons.net.tftp.*;
class FTPTransfer
static public void main(String[]p)
FTPTransfer ob = new FTPTransfer();
// ob.Create_Zip_File(new File("outfile.zip"),new File[]{new File("c:\\trialtwo")}, false);
ob.ftpConnect();
// connecting to FTP server
public void ftpConnect()
boolean error = false;
FTPClient ftp = null;
try
int reply;
//ftp.connect("ftp.comcast.com");
ftp = new FTPClient();
ftp.connect( "localhost",21);
// ftp.login( username, password );
System.out.print("reply from FTP Server :"+ftp.getReplyString());
// After connection attempt, you should check the reply code to verify
// success.
reply = ftp.getReplyCode();
if(!FTPReply.isPositiveCompletion(reply)) {
ftp.disconnect();
System.err.println("FTP server refused connection.");
System.exit(1);
// ftp.sendFile();
// transfer files
// ftp.logout();
TFTPClient tftp = new TFTPClient();
System.out.print("before sending");
tftp.sendFile("c:\\trialtwo\\a-1.txt",1,new FileInputStream("c:\\trialtwo\\a-1.txt"),"localhost",21);
System.out.print("after sending");
catch(IOException e)
error = true;
e.printStackTrace();
finally
if(ftp.isConnected())
try
ftp.disconnect();
catch(IOException ioe)
// do nothing
System.exit(error ? 1 : 0);
//send files
// filename - The name the remote server should use when creating the file on its file system.
// mode - The TFTP mode of the transfer (one of the MODE constants).
// host - The remote host receiving the file.
//port - The port number of the remote TFTP server.
private void listContents( File Zip_File, File dir, ZipOutputStream out )
throws Exception
String[] files;
files = dir.list();
byte[] buf = new byte[1024];
File[] file = dir.listFiles();
for (int i = 0; i < file.length; i++) {
System.out.println("*********** "+file);
// File f = new File(dir,file[i]);
try{
FileInputStream in = new FileInputStream(file[i]);
out.putNextEntry(new ZipEntry(file[i].getPath()));
int len;
while((len = in.read(buf)) > 0) {
out.write(buf, 0, len);
in.close();
catch(Exception e)
zipEntry(Zip_File, file[i], out);
} // end listContents()
void Create_Zip_File(File Zip_File,File[] To_Be_Zipped_Files,boolean Skip_Dirs)
try
// Open archive file
FileOutputStream stream=new FileOutputStream(Zip_File);
ZipOutputStream out=new ZipOutputStream(stream);
for (int i=0;i<To_Be_Zipped_Files.length;i++)
//if (To_Be_Zipped_Files[i]==null
// || !To_Be_Zipped_Files[i].exists()
// || (Skip_Dirs ))
// continue;
System.out.println("Adding "+To_Be_Zipped_Files[i].getName());
zipEntry(Zip_File, To_Be_Zipped_Files[i], out);
out.close();
stream.close();
System.out.println("Finished zipping : "+ Zip_File.getAbsolutePath());
catch (Exception e)
e.printStackTrace();
System.out.println("Error: " + e.getMessage());
return;
private void zipEntry(File Zip_File, File file, ZipOutputStream out) throws Exception
if (file.isDirectory())
listContents(Zip_File, file, out);
return;

You'll stand a better chance of getting help if you're more specific about what problems you're encountering. "Can't send file" doesn't say much.
When you post code, please use[code] and [/code] tags as described in Formatting tips on the message entry page. It makes it much easier to read.

Communication with the Idoc file with is server through FTP (TCP/IP)

Hi All,
My file which is stored in the directory of the SAP server.
In this file Sales order data is stored in the IDOC format.
I have to devlelop a interface which which communicate with Server (where IDOC file is stored) with FTP using TCP/IP.
Is there any sample code is there.
Thanks in advance .
Point guranted .

Hi,
Check this links out
Using of FTP_CONNECT
FTP_CONNECT
FTP_CONNECT
Regards,
Samson Rodrigues.

Upload through FTP, wheres my files?

Similar Messages

Maybe you are looking for