Uploading flv files issue

I upgraded to DW CS3 and now when I try to upload a flv file,
it says it can't complete it and the file isn't updated. I go back
to my old version of DR8 and it works just fine. When I synchronize
in CS3 it will tel me that files need to be updated, but when I try
to do it, it says it can't complete. Why? This doesn't happen EVERY
time though which makes it even harder to figure out. I tried
deleting the version on the server, but it still won't upload the
new version. How am I supposed to update my site and get the new
files up? I make a lot of changes to the site, then synchronize
it.That is the only way to be sure I haven't missed some files. Can
someone tell me why it works ok in DW8 but not in CS3? Is there a
setting somwhere I need to change? Thanks for any help.
Larry

Welcome to our community, Leslie
I'm thinking that what's happening here is the LMS simply
doesn't recognize that the .FLVs should be included. So I'm
wondering if the following workaround would work for you. When you
insert the FLV reference, code an absolute path. For example, lets
say the LMS serves the Captivate up and the logical path is
http://www.somesite.com/training/CaptivateMovie.htm.
Maybe you store all the .FLV files in this locaton:
http://www.somesite.com/training/videos.
So you would then code the link to your FLV to use that explicit
path of
http://www.somesite.com/training/videos/MyVideo.FLV.
I'm not 100% sure this will work, but I can't really fathom a
reason it shouldn't.
Cheers... Rick

Similar Messages

WebCam Uploaded FLV File Problems

Hello,
I have a Flash project in which the user records a video with
their webcam in Flash. The video is transmitted to Flash
Communications Server as an FLV file, and I leave it there to be
played later.
1. Because I have the quality set high (90), the file is huge
(~80 KBytes/sec). Is there any way that I can compress the video
either client-side while it uploads or server-side when it gets
there?
2. One idea that I had was to transcode the video server-side
to another format in hopes of improving the compression.
Unfortunately, none of the transcoding or compression engines
recognize the FLV as a valid file. I tried On2, ffmpeg, Riva,
Sorenson, etc. The FLV does play ok and seems valid, but these
tools fail when trying to convert it.
Thanks very much for any help.

To decrease the bitrate, see the docs for camera.setMode,
camera.setRate, and camera.setQuality.
Transcoding flv files created by FMS is a tough one. The
problem is that the audio is encoded with Nellymoser's Asao codec,
with is closed and proprietary. At the moment, the only way to
leagally obtain the codec is to buy Nellymoser's conversion
utility, whick comes with a hefty price tag.
See this site for links to flv to XXX conversion discussions:
http://nellymoser.codec.googlepages.com/

More flv file issues

hello out there !
What is the reason that at some sites when I go to dl flv files through the activity window of the windows safari menu by double clicking on the flv file I get a text rather then a get video fora dl. And more importantly how do I get around that ? A site like teacher tube has files I'd like to save into Qt. If I could dl the actual flv I could do the rest.
thanks

You'll need to manually remove the .txt file extension after the download is complete.
Many Sites use PHP scripts to serve files from a data base. Some need updating (TeacherTube is one) so they don't append file extensions for downloads. The file works in the page code and they don't expect users to be "borrowing" the file via direct download.

Upload xls file issue

HI Experts , i am uploading data from xls file , the problem is that if the xls file is in edit mode , the system goes in indefinite loop or hang state , is there any way or function module to determine whether the xls file is being edited or open .
Thanks in advance.

are you using Function Module for this? If yes, just uncomment the exceptions, problem will be solved, i suppose.
Regards,
Sam

FLV File support in PE7 Trial Version?

I just downloaded and installed PE7 Trial version. My main interest in this version was to be able to edit .FLV video files. I've noticed in some reviews PE7 is able to upload .FLV files to Youtube. Well the trial version doesn't appear to suport .FLV files for editing. The trial version install procedure mentions that not all features of PE7 are included in this install. My question is does the full PE7 version support editing .FLV files?

You can not import and edit FLV files in PE7, it will only export to FLV. It can import and edit SWF files. If you want to edit FLV files you will need to convert them to another format, ideally DV-AVI. You could do an internet search for a free converter (there are a few) or purchase one.

ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide

iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

Webutil - issue with uploading text files with client_get_file_name

Hi,
I'm using webutil client_get_file_name to upload files from the client machine to the server.
It works fine for xls,pdf,doc files etc. but not for txt files it seems.
It doesn't display any error at all either.
Has anyone seen this type of issue before?
Kind regards,
Tom
Windows XP
Forms v10.1.2.0.2

Hi Sarah et al,
The code that I'm using to upload any file type format is:
vfilename := client_get_file_name('c:\',file_filter => 'All files (*.*)');
it works for doc/pdf/xls/rtf/csv etc.
but not for text files i.e. .txt
Also, could someone tell me how to open a .msg (Outlook message) file
as it gives the output:
'Cannot read item' upon the opening of the Outlook application.
I'm using the following to try and open it:
CLIENT_HOST( 'cmd /C start '||p_filename);
Your help would be appreciated.
Kind regards,
Tom

Adobe Media Encoder Quality Issues for 4:3 FLV Files

I am working in a 480x360 window for a FLV file. Whether I export a 60 minute presentation or a 10 second pre-roll FLV file, the rendered file quality is distorted and poor. I have done the same work in CS3, but as I changed computers, the CS4 was installed.
With the video presentation, orginally capturing the video is set as .9 Pixel Aspect Ration, but interpreting the footage to 1.0 is also an issue.
The quality of video that is being produced is much worse then CS3 and unuseable in most cases.
Frame Dimensions: 480x360
Frame Rate: Same as source. (29.97)
Endoding: CBR
Passes: 2
Bitrate: 500
Audio: Mono / 48

A couple things:
1) VP6 and H.264 are codecs that operate in "mod16". What that means is that they begin by dividing a video image into 16x16 blocks, followed by 8x8, 8x4, and 4x4 blocks. This makes for a more efficient encode. Your 240 dimension is fine (240 / 16 = 15), but the 515 dimension could be slightly problematic (515 / 16 = 32.1875). The codec will stretch or compress the image to fit into that dimension, and so can result in a lower quality encode. If you can, try encoding at 512x240, by cropping a couple pixels in the horizontal dimension. May not make a big difference, but it's good practice with these codecs.
2) To me, your original encode looks like the product of Adobe's less-that-capable deinterlacing scheme. You're dealing with progressive assets and a progressive target. I'd submit that the reason your 1280x720 encode looks better is that you're using a progressive preset, with no deinterlacing necessary when exporting. One thing you could check is the field order of your original sequence setup--if it's interlaced, I'd say you have your answer. If it's progressive--well, then I'm wrong :) However, you didn't explicitly say this in your original post, but it's worth a look.
If it is interlaced, I don't think you can change that after the sequence is started, so just create a new sequence with the proper progressive settings, and copy and paste the original sequence contents into that one. Now, when you export, there will be no need for deinterlacing.
Anyway, that's my guess...

Issue when I upload CSV file for insert contact list on Cisco Attendant Console Advanced

Hi Friends,
I have error "Provided file is not valid CSV File" when I upload CSV file to Cisco Attendant Console Advanced system. I'm not sure what happen about my CSV. My purpose is insert contact list to system and create CSV base on documentation.
Anyone have idea to solve this issue please kindly help me.
Thanks

You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant

Uploaded swf and flv files - right ?

Hi all -
Just getting to grips with flash movies, however not 100%
i've got it right as yet ! Could someone with experience in flash
movies confirm the files to upload are the swf and flv files to our
server ? Everything appears OK when viewing the movies - take a
quick look here www.sofabedgallery.co.uk/cosmosofa.php however I'm
just a little concerned of the size of the flv file at a couple of
mb. Is this the correct file to upload or should I try to upload
the fla smaller file?
Many thanks,
Chris.

Hi ,
You can publish your project as MP4 with Cp6. For that --
Do -- File-- Publish-- Media--- (Choose Dropdown) MP4 and (adjust settings, if you like) Hit publish.
You can use the Adobe Media Encoder to convert the Video into FLV format.
Also, you can use the SWF option on Publish Screen to publish the project as a Flash File.
Thanks!
Anjaneai

Issue while uploading .TIFF file into Standard text using RSTXLDMC

Hi All,
We are facing issues while uploading .TIFF file into standard text through program RSTXLDMC.
Getting the following error.
TIFF format error: No baseline TIFF 6.0 file.
The image is a colored one.
Please provide me solution if anyone has worked in this area.
Thanks in Advance,
Anand Raj Kuruba.

Hi,
Often this error occurs because the TIFF file you have has been saved with some form of compression. You need to open in a picture edit program and save as TIFF making sure options are set so there is no compression.
Andrew

Issue with FLV file in Photoshop Extended

Hi,
I have Adobe Photoshop Extended & Adobe Flash Professional and Quicktime 7 installed. The photoshop documentation states that it supports importation of FLV files. Yet when I select File -> Import -> Video Frames to Layers the only options are MOV, AVI, MPG, MPEG no FLV. Is there something else I need to do or have to import FLV's into PS Ext.?

Thanks for the reply. Unfortunately -NO- thats what I was given and I was hoping to avoid transcoding it to MOV so I could open the file in frame animation mode and make the changes. So I guess I'm stuck downstream

Green Screen issue with an flv file

I am attempting to create a Green Screen were I walk out onto my website and speak to the viewer. Everything looks good and plays within Premiere but after exporting and placing it on my webpage a black background shows instead of the background being transparent. can someone help with what I am doing wrong?

> and are flv files the only ones that I would run into this with?
There are other kinds of files that can include alpha channels (transparency). Just so that you know what to look for, QuickTime and some other formats require you to specify the inclusion of an alpha channel from a color depth or channels menu. In some cases, a plus sign (as in Millions Of Colors+) denotes an alpha channel. Similarly, choosing to output to 32 bits per pixel implies an output depth of 8 bits per channel for each of four channels: RGBA (where A is for alpha).
But, yes, FLV with video encoded with the On2 VP6 codec is the main format for web video that supports alpha channels.

Issue while uploading DME file generated from SAP using program RFFOAU_T

Hi Friends,
I ran f110 for our australian company code and able to generate DME file for making supplier payments successfully.
Encountered problem while uploading this file into our Bank Portal, upload is unsuccessful, status is showing as "Requires Repair u201C
I called the bank customer service and they told me that ,
We need to enter in our SAP the Bank ID ,
We have to enter there : NAB
Customer service told me that their bank is looking for Bank ID ,
But canu2019t see it , so the payment is not going through.
Can you please help me that where in SAP Bank ID should be entered, so as to upload this file successfully.
Thanks for your help.
Regards
Anil

Hi Anil,
While creating House Banks you can find Button called Data Medium Exchange. There is Bank Id field.
Try it once
reg
vishnu

HOW TO TURN A .FLV FILE INTO AN SWF IN ADOBE?

Questions,,,,,
1. In a flash slide,,,,,How do I add effects to the movie,
like an intro black curtain coming up from the top and closing down
on the bottom,,,,,,to make it look more
professional?,,,,,,,,,,,like this video-SUMMER NIGHTS-
http://music.yahoo.com/ar-289037-videos--Lil-Rob
2. How do I convert .flv files to swf files so I can upload
them to my site,,,,,because thats all it excepts?

Peace,
I will try to answer both questions. You abviously know how
to creat an .FLV file. when you load you files on the server you
must place the .SWF and the .FLV in the same folder. With that you
will create your link to the .SWF file.
In regards to the other issue. I am incline to think that
what you see is a video effect and not a Flash one. If I where to
try this I would upload my video into the time line and add a new
layor to hold my effect. This should do it. But it will of course
make you .SWF larger than if you did the effect in a video editing
program.
I hope I helped some how.
Peace
Khnumtemu

Uploading flv files issue

Similar Messages

Maybe you are looking for