URGENT : Apex Hosting Service - Send Mail procedure is not working

Hi,
Im an Oracle Employee : [email protected]
apex_mail.send package has stopped sending Emails (I work a lot with this package on hoster).
It would be much appreciated if you could fix it a.s.a.p
Regards
Etay G
for example :
begin
apex_mail.send(
p_to => 'etay.gudai@ oracle.com' , -- change to your email address
p_from => '[email protected]', -- change to a real senders email address
p_body => 'l_body',
p_body_html => 'l_body_html',
p_subj => 'q_name');
end;

Etay - Where are your applications hosted? What is the development service URL (to the Builder) ?
Scott

Similar Messages

  • Sending Mail, Port 587 not working

    My Mail app doesn't send anything. I can receive stuff with not problem, and I did a search here on the forums and found that changing the port to 587 was one fix. That did not work.
    The message I am getting it that the server is timing out, and after calling my ISP and being on the phone with them for half an hour they said if was an apple issue.
    Has anyone figured out any other fixes besides changing the port to 587?
    Blake

    Blake,
    This may only be a typo as you posted, but you have misspelled the server name, in that I am sure the prefix should be smtp and not stmp.
    If only a typo as your posted, then this might be an issue with MTU (maximum transmission unit). See the following support document for methods of diagnosing this:
    http://docs.info.apple.com/article.html?artnum=303192
    If lowering the MTU manually works, then we can look for other ways to fully accomplish the correct balance, which might include shutting down modem, router, and other elements of the network and then repowering.
    Ernie

  • Gmail "send mail as" setting not working from iPhone

    I added a second gmail account to Mail. This gmail account has the "send mail as" setting set to show a different "from" address than the actual gmail account, and works fine when I send mail from my desktop. When I send mail from that account through Mail on the iPhone, it does not pick up this setting and the actual gmail account appears as the "from" address. I don't see any place in Settings or Mail to set this, and I couldn't find previous discussions of it here. Any help? Thanks in advance.

    Anyone?

  • Sender Soap Channel is not working - Service Temporarily Unavailable [503]

    dEAR FRIENDS,
    We are facing one critical issue in sender soap adapter. After upgrading our system to PI 7.1 The sender soap channle is not working. From source  system  it is not reaching PI : the log from source system as follows:
    org.springframework.ws.client.WebServiceTransportException: Service Temporarily Unavailable [503]
          at org.springframework.ws.client.core.WebServiceTemplate.handleError(WebServiceTemplate.java:627)
          at org.springframework.ws.client.core.WebServiceTemplate.doSendAndReceive(WebServiceTemplate.java:551)
          at org.springframework.ws.client.core.WebServiceTemplate.sendAndReceive(WebServiceTemplate.java:502)
          at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:351)
          at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:345)
          at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:337)
          at com.palm.txnengine.wsclient.DailyRevenuePostingWSGateWaySupport.postToSap(DailyRevenuePostingWSGateWaySupport.java:23)
          at com.palm.txnengine.wsclient.DailyRevenuePostingImpl.execute(DailyRevenuePostingImpl.java:93)
          at org.springframework.batch.core.step.tasklet.TaskletStep$2.doInChunkContext(TaskletStep.java:264)
          at org.springframework.batch.core.scope.context.StepContextRepeatCallback.doInIteration(StepContextRepeatCallback.java:67)
          at org.springframework.batch.repeat.support.RepeatTemplate.getNextResult(RepeatTemplate.java:352)
          at org.springframework.batch.repeat.support.RepeatTemplate.executeInternal(RepeatTemplate.java:212)
          at org.springframework.batch.repeat.support.RepeatTemplate.iterate(RepeatTemplate.java:143)
          at org.springframework.batch.core.step.tasklet.TaskletStep.doExecute(TaskletStep.java:239)
          at org.springframework.batch.core.step.AbstractStep.execute(AbstractStep.java:198)
          at org.springframework.batch.core.job.AbstractJob.handleStep(AbstractJob.java:348)
          at org.springframework.batch.core.job.flow.FlowJob.access$0(FlowJob.java:1)
          at org.springframework.batch.core.job.flow.FlowJob$JobFlowExecutor.executeStep(FlowJob.java:137)
          at org.springframework.batch.core.job.flow.support.state.StepState.handle(StepState.java:60)
          at org.springframework.batch.core.job.flow.support.SimpleFlow.resume(SimpleFlow.java:144)
          at org.springframework.batch.core.job.flow.support.SimpleFlow.start(SimpleFlow.java:124)
          at org.springframework.batch.core.job.flow.FlowJob.doExecute(FlowJob.java:105)
          at org.springframework.batch.core.job.AbstractJob.execute(AbstractJob.java:250)
          at org.springframework.batch.core.launch.support.SimpleJobLauncher$1.run(SimpleJobLauncher.java:110)
          at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
          at org.springframework.batch.core.launch.support.SimpleJobLauncher.run(SimpleJobLauncher.java:105)
          at org.springframework.batch.core.launch.support.CommandLineJobRunner.start(CommandLineJobRunner.java:207)
          at org.springframework.batch.core.launch.support.CommandLineJobRunner.main(CommandLineJobRunner.java:254)

    Hi,
    Please check this generic description:
    The error message 503 Service unavailable Application stopped! is displayed.
    Description:The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
    Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
    Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
    u2022 Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
    u2022 The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
    u2022 Refer SAP Note 803145,807000,791655
    May it helps.
    Regards,
    Caio Cagnani

  • 3GS 3.0.1 - Cannot send mail, You did not specify any recipient

    Whenever I send a message from iPhone with MobileMe account and then resync the account with server (Push is off), the very same message, already sent with success, appears in Outgoing folder and error pops up saying:
    *Cannot send mail, You did not specify any recipient*
    See the picture below:
    http://gitarzysta.com/iphone/error1.jpg
    It cannot be deleted, either - error message pops up saying: *Unable to move message*
    http://gitarzysta.com/iphone/error2.jpg
    Important: it was sent and received successfully. It is just either iPhone, MobileMe or both that have problems to sync correctly.
    On my Mac that I sync with this MobileMe account all is fine.
    What can be wrong? There was an old topic here, from 2008, where several users of 3G had exactly the same issue, but no root cause or solution was provided.
    Thanks!
    Message was edited by: gitarzysta

    Try deleting and manually recreating the account on your iPhone.
    If you transferred the account settings from your Mac via the iTunes sync process - selected under the Info tab for your iPhone sync preferences with iTunes, deselect this for your iPhone sync preferences followed by selecting Apply before doing so.

  • 'Error Sending Mail :send_mail.ksh: not found'

    Hi all,
    com/btw/pricemaker: under this directory i have kept all the required class files and also the shell script.
    R_ConcatenatorRatingComponent.class
    InputProcessor.class
    InputProcessor$FilesHandler.class
    InputProcessor$BatchStringTokenizer.class
    send_mail.ksh
    set_mail_details.ksh
    OutputGenerator.class
    and i created a jar file
    $jar -cf pmbtw.jar com
    when i run the prog i am getting the above specified error.
    Can any please help me.

    I wrote a function in java to send a mail ,
    if (emailFile.exists())
                sendMail(emailFile.getAbsolutePath());
    public void sendMail(String filePath)      {
           String mailIds = "[email protected]";
           String from = "[email protected]";
           try{
                String sub="<PM>:Alert there are some data mismatch in the file";
                      //subject=subject.replace(' ','~');
                 String body = "These are the records in which NTSCLI Rate is greater than or equal to VOIP rate.";
                   //body=body.replace(' ','~');
                 String exec_command = "send_mail.ksh "+subject+" "+body+" "+mailIds+" "+filePath;
                              Process p = Runtime.getRuntime().exec(exec_command);
                   int exitVal=p.waitFor();
                   if (exitVal != 0)
                        System.out.println("Error Sending Mail: script was not executed");
              catch(Exception e)
                  System.out.println("Error Sending Mail: " + e.getMessage());
         }please any one help me :-(

  • Cannot Send Mail - You did not specify any recipients

    Hi all,
    I have an email stuck in my outbox which has the "This message has not been downloaded from the server" issue I have seen on this forum. Everytime I go to my email folders list, I get the 'Cannot Send Mail - You did not specify any recipients' error message. I am unable to trash it, move it as I get the 'Unable to Move Message' error.
    Any ideas how I can remove this message and clear my outbox!?
    Thanks,

    Me too! This is very annoying. I LOVE Apple but this new 3G keeps on throwing curveballs at me. I, too, deleted my e-mail account from my iPhone to get rid of this "unsent message" but with Apple you shouldn't have to do that! Certain that it will happen again, I'm interested if anyone comes up with any fixes so that next time we don't have to delete/add e-mail account.

  • Can i send mail to yahoo from work flow

    can i send mail to yahoo from work flow  if it is possible how do i do that ? is this program enough if yes how do i do that ? do i need to write or change any coding

    Hi Neo ,
    You can use Function module  'SO_OBJECT_SEND' from your BO Method.
      For this Function module to work Email configuration should be done for 
      external  addresses..Please check with your Basis team for necessary config.
    Thank you
    Srinivas

  • Out of office message when sending mail to Lotus Notes from SAP

    Hi,
    Is it possible to have an 'out of office' message when sending mail to Lotus Notes from SAP?
    I'm sending account statements by mail via a modified version of function FI_OPT_ARCHIVE_CORRESPONDENCE. The SAP username is send as a parameter, and later converted to the e-mail saved in the user profile. This works, - but I would like to have an out of office reply if the user I send to is out of office.
    Hope someone can help...
    Regards,
    Lene

    As Thomas pointed out, you can use regular SMTP mail to send the contents to Lotus Notes. You can use the function module SO_OBJECT_SEND or any of the SAP Office function modules to do this.
    Only thing to remember is that the SMTP may have been disabled by your basis team due to security risks involved. An alternative could be a lotus notes connector available from IBM.
    Srinivas

  • Mail flow is not working Exchange 2010 to 2013 in coexistence mode

    Hi ,
    We are migrating Exchange 2010 sp3 to Exchange 2013.
    mail flow is not working from 2010 to 2013, mails are qued up in smtp relay queueu.
    already added 2010 ip  address  to 2013 receive connector and give anonymous permission.
    but still mails are smtp relay queue.

    Hi Sujith,
    As requested by
    Nithyanandham please post the error from Queue Viewer.
    Few things to check. 
    Please remove IP address from "Default Receive connector" first.
    Ensure both servers can ping by FQDN and it returns correct IP.  i.e.  ping exch2013.contoso.com
    Make sure both exchange server can communicate each other. if possible try to telnet port 25 by FQDN of the Exchange2013 server and try to send an email from exchange2010 using the URL below. if there is any error please post error.
    http://exchange.mvps.org/smtp_frames.htm
    Make sure "Exchange server Authentication" is ticked in your default receive connector properties. If not ticked tick it and restart Transport service and check mail flow again.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Fetch new mail messages does not work

    On my notebook the fetch new mail messages does not work
    Settings:
    - Fetch new messages:     every minute
    - Play sound Purr
    I need to us the manual button.
    On my imac it works fine with the same accounts

    My mail sounds are all screwed up. I hear the plane fly when I send an email but when I receive mail, no sound. I have rules set up which worked in Tiger. One rule is for mail to play a message "You have a message from "John Doe" when I receive an email from "John Doe" but it only plays when I send "John Doe" and email. Assbackwards.
    Sometimes when reading new mail, it just disappears. I have to click on it again. I find this version of email to be very flaky!
    Dave Brenneman

  • My Comcast Mail account is not working on all three devices

    Good Morning!
    Last night I plugged in my IPhone and IPad for charging and syncing. This morning my Comcast mail account is not working on my MAC, IPad and IPhone.
    I have deleted the acount on all three devices and set up a "new" account. Did not work. One message I receive is check the mail servicer. I have made sure the correct info is entered. My GMail and Mac email are working.
    Please help

    Problem with Comcast since last night. They say it won't be solved til after 8 tonight.
    Thank you

  • When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

    When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

    Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
    Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

  • After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • Some of the services of ITS 640 are not working

    Hi All,
    I have implemented SAP NW 04 SR 1 Portal and integrated SRM 4.0(EBP 5.0).I have also implemented Business Package for mySAP SRM 4.0 60.2.
    I am using internal ITS for HTML GUI.
    Some of the iviews of the business packages  are working but some of them are not.
    I am getting an error message
    "The URL http://g4kwas642.corp.rwdtech.com:8050/sap/bc/gui/sap/its/bbpsc05/! was not called due to an error.
    Note
    The following error text was processed in the system SRM : Attribute for user PBHONDELE contains errors. Inform system admin.
    The error occurred on the application server g4kwas642_SRM_50 and in the work process 0 .
    The termination type was: TH_RES_FREE
    The ABAP call stack was:
    Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
    Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
    Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS"
    I have published all the services that are under SICF.
    I had also published all the services using w3_publish_services and siac_publish_all_int.
    It says that all the services are succesfully published.
    When I  go to SICf to test the service,some of them are not working.
    Can you guys tell me what are the steps that I am missing?
    Thanks,
    Paritosh

    I am also getting the same th_res_free error..
    I have installed nw04 sr1 and trying to run ESS on it.
    My problem is, i have installed sap WAS 6.4 on different machine and R/3 on different machine..
    So now.. where i have WAS.. does not have all the services. All services are there on R/3 server..
    Now how do i publish the services on WAS 6.4??
    Coz that option to publish on INTERNAL site is not coming on my R/3 (4.7) as it does not have WAS 6.4.. its on different machine.
    Please tell me what can be done in this case.
    I cant create a R/3 transaction iView using webgui because of this. my Web gui service on WAS 6.4 runs fine whne i test it in SICF .. but not in Iview..
    Please help me out .. i dont want to install a ITS on another machine which is simple solution..

Maybe you are looking for