URGENT HELP-CONFIGURE SWITCH 3560

Dear All,
I have here in my company 25 Cisco Switch 3560 .
as i know, i will configure the Switch with the Basic configuration like Hostname & IP-Address - & Gateway.
My 2 question is :-
1- if i configure the switch with the Basic Configuration like IP-Address & Subnet mask & So on , where its saved on the Switch Exactly ?
2- instead of have the 25 Switch in-front of me , and assign each switch his configuration like IP-Address & all the Things, is there any way to copy the Configurations from the switch which i configured on the Text file & then on each switch i will modify the Text file which include the configuration for that switch ( New configuration ) & then apply to that switch ( the New one ) ?
if i can do like that , can i & HOW CAN I DO IT , PLEASE HELP ME BY WRITING THE COMMAND WHICH I NEED TO FOLLOW IT ?
Thanks .
Rania.

Hi Rania,
When you just configure the switch all the config is in DRAM (running config) but when you do wr me it is saved in NVRAM (startup config).
What you can do is write all the commands for ip address and the configs what you want on wordpad and from there you can modify the lines what you want for each switch and just copy it and paste on the switch global config mode.
Remember you have to create all the vlans manually in vlan database or you can configure one switch as VTp server and another switch as VTP client and all the vlans will be synched to the switches which are in VTP client mode.
To configure ip address
int vlan 1
ip address x.x.x.x x.x.x.x
no shut
to configure hostname
config t
hostname
This link is a complete config guide which will guide you with all what you want to configure on 3560 switch
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12119ea1/3560scg/index.htm
HTH
Ankur

Similar Messages

  • Switch until release using keyboard...need urgent help

    Hi,
    i have a problem of configuring "switch until release" action using keyboard....
    or is it there no this function at all...
    it seems like all i can do is press to ON and press again to OFF
    anyone can help...
    need Urgent help....
    thank you in advance..

    This isn't possible because of the way operating systems
    handle keyboard events. When you press a keyboard key, it does not register as
    one key down. For whatever your operating system is set for as far as repeating
    characters, it will register that many key down presses. The mouse works
    differently, when you press the mouse it keeps that event "locked"
    until you release the mouse. Because of this, you can not make a switch until
    release using the keyboard; this definition is only for mouse clicks.
    Brandon Vasquez | Software Engineer | Integration Services | National Instruments

  • Regarding DMS configuration - urgent help

    Hi,
    I need urgent help with the below scenario.
    I created one document,attached a drawing,now i want to submit to a higher level authority using workflow who can approve/reject.how do i do this.
    Also i would like to create  two vaults Vault A and Vault B ,user A has read/write to vault A and user B has read/write to only Vault B ,but user C has read.write to both vaults.
    Please let me know how do i create users,configure vaults and give permissions.
    thanks
    prasad suresh

    first u have to create  status for approval
    i give u one example of it
    first u have to create different stauts  for approval process
    for this u have to configure in SPRO with the relevant document type
    and give the  proper authorization in PFCG to relavant user , who create the doc and who chek and who released the doc
    read this carefully , i made this kind of approval process in my project
    1 --- "CR"   means "Create"  by document Creater
    2 --- "Ch"   "Checked" by X authority    /  if any mistake found then  "R1"    "Rework"  by X authority
    3 ---  "Re"   " Released" by Y authority / if any mistake found then "R2"    "Rework"  by Y authority
    think that there is three  stage for approval of any drawing
    first stage  -
    document creat   (Draft Man Creat Drawing and attached )
                              at that time document status is "Cr" after creating doc , that DIR info is sent to higher
                              authority using document distribution functionality
    second stage----- document checker (Receive document from Draft Man in SAP Inbox)
                               he chek that drawing (DIR) . if there is not any other mistake than it again
                              follow the cycle of document distribution to his higher authority. this time
                                document status updated from " Cr "  to " Ch" means from "creat" to "checked "
                                if any mistake found than he change status "Cr"  to "R1" means
                                create to rework  and send it back to drafts man
                                 and drafts man again modify drawing and modify status "R1" to "Cr"
                                 and send it to higher authority
    third stage -
        document aprover  (Receive document from document checker in SAP Inbox)
                               he chek that drawing (DIR) . if there is not any other mistake than he update
                                document status  from  " Ch" to "Re"  means from  "checked " to "Released"
                                if any mistake found than he change status "ch"  to "R2" means
                                checked  to rework  and send it back to drafts man
                                 and drafts man again modify drawing and modify status "R2" to "Cr"
                                 and send it to higher authority
    and in second question , pls tell me clear what u wana do
    vaults means what ?
    is it Repository or what ?
    give me idea by some example

  • Dacl on ACS 5.1 and Catalyst switch 3560

    Dear all
    I have ACS 5.1 and Catalyst switch 3560 with version 12.2(53)SE. I configure a dacl on the ACS and I use it on authorization profile.
    This authrization profile is used on access policy.
    I tried the authentication but it doesn't work. I checked the ACS logs and I found that the user is authenicated successfuly but the dacl gives this error (The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected)
    Steps:
    11001  Received RADIUS Access-Request
    11017  RADIUS created a new session
    11025  The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected
    11003  Returned RADIUS Access-Reject
    DACL:
    deny ip host 1.2.3.4 1.2.3.0 0.0.0.255 log
    permit ip any any log
    Thanks on advance,

    Dear Tiago
    I applied the command "radius-server vsa send". Now I can see the dacl is applied but I can't see it on the switch and even the authentication is succueeded ont the ACS logs but it give me unauthoized on the switchport. You can see the logs( started with the username acstest and the access-list is applied but it doesn't work and you can see theat it goes for mab after eap timed out). I hope you can help on this issue.
    Dec 13,10 10:29:00.513 AM
    00-23-AE-7A-58-A6
    00-23-AE-7A-58-A6
    Default Network Access
    Lookup
    Dot1x-3560-Switch
    1.2.3.4
    FastEthernet0/5
    TESTACS
    22056 Subject not found in the applicable identity store(s).
    Dec 13,10 10:28:29.186 AM
    #ACSACL#-IP-Guest-4cfcc14d
    Dot1x-3560-Switch
    1.2.3.4
    TESTACS
    Dec 13,10 10:28:28.726 AM
    acstest
    00-23-AE-7A-58-A6
    Default Network Access
    PEAP (EAP-MSCHAPv2)
    Dot1x-3560-Switch
    1.2.3.4
    FastEthernet0/5
    TESTACS
    Thanks,

  • Iphone 5 changes time randomly.. need urgent help!!

    hi everybody .. i need urgent help to fix the problem of my iphone 5 ( IOS 7, Vodafone Germany) ..  2 weeks ago i noticed that the time on iphone was completely wrong and not related even to other time zones .. sometimes it freezed at the same minute for 1 hour .. sometimes it ran anticlockwise.. i switched off the automatic time setting..i made reset and erased all contents and reloaded all configuration from iCloud..the same problem.. i registered it as new iPhone .. no improvement... i switched off the WIFI..3G...i made reset using iTunes .. same error. same error... i took it to Apple store in Dresden- Germany and demostrated the problem there .. they told me that the problem beyond their knowledge and i have to contact apple support ... i sent the iPhone to Apple support in Netherland ... they sent it back on the next day coz they were not able to reproduce the problem...after regestering the iPhone again with my ID.. the same problem ... it's catastrophic coz many functions are time dependent (imessege, Calender, Email, etc.. )..and i cannot rely on my iPhone anymore... has anybody encountered the same problem in germany... and what is the solution?

    If the phone is failing to charge, then there are three possibilities -
    1) The charging cable is defective - does it work with anything else?
    2) The power source is defective - unlikely since you have tried different ones with same result.
    3) The phone has a hardware failure - which means you need to take to an Apple store or call them up for advice.

  • Urgent Help Needed: ATI Graphics Card install

    Hello All.... I am in need of some urgent help..
    I am trying to install a new graphics card - the ATI Radeon 9600 SE. I currently have a Voodoo3 card. I followed all of the instructions step by step, but when I plug the monitor to the Radeon card and boot up, I do not get any display. I have tried everything I can think of, and yet - I am sure the card is secured in place and the monitor is plug into the card.
    Can anyone help me on this one.. ATI's support is, well - lacking..
    Here is some info on my pc:
    MCI motherboard
    AMD Athlon(tm) XP 2000+ 1.7 GHz
    768 MB
    AMIINT - 10 Version 1.00, 07/10/02
    Could the problem be with switching from a regular PCI card to an AGP card???

    Quote
    Originally posted by southmike
    okay i'll bite what are omega drivers,
    how are they different from cat4.2 drivers
    i was suprised that the voodoo 3 would work in a AMD64 mobo...
    whoops....just read the rest of the post :lol:
    BTW is there an external power connector that needs to be plugged in?

  • Urgent help needed: registry.dat is missing when i run my form in web base

    Hi gurus,
    i configured my forms and report server in windows 2003 and i received the following error msg when tryin to access my web base forms 6I.
    FRM-92129: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
    Details...
    Java Exception:
    oracle.forms.engine.RunformException: FRM-92120: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
    at oracle.forms.engine.Runform.initRegistry(Unknow Source)
    at oracle.forms.engine.Runform.startRegistry(Unknow Source)
    at oracle.forms.engine.Main.createRunform(Unknow Source)
    at oracle.forms.engine.Main.start(Unknow Source)
    at sun.applet.JinitAppletPanel.run(Compiled code)
    at java.lang.Tread.run(Thread.java:466)
    what can be goes wrong with my steps to receive the above error?? i tried in windows XP and Vista, and i getting the same error message as above.
    Your urgent help and advise is needed plssssssss.......
    Many thanks in advance.

    The URL doesn't seem correct: http://domain.com/form60java/oracle/forms/registry/Registry.dat
    I'm expecting a slash (/) between forms60 and java. Have a look in the formsweb.cfg if any paths are misconfigured.
    Also, try if the URL with the slash:
    http://domain.com/form60/java/oracle/forms/registry/Registry.dat
    does work when you just paste it in a browser. It should download the Registry.dat file

  • URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

    My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
    I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
    I've tried switching to another USB port of my MacBook. No luck.
    My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
    I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
    Urgent help needed & appreciated. Millions of thanks in advance.
    Gary

    1. I used both cables - theirs & mine ... and on several macs
    2. yes, same cable for wall & mac
    3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
    anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

  • Urgent help need on swing problem

    Dear friends,
    I met a problem and need urgent help from guru here, I am Swing newbie,
    I have following code and hope to draw lines between any two components at RUN-TIME, not at design time
    Please throw some skeleton code, Thanks so much!!
    code:
    package com.swing.test;
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.geom.*;
    import javax.swing.*;
    import javax.swing.event.*;
    public class LongguConnectLineCommponent
        public static void main(String[] args)
            JFrame f = new JFrame("Connecting Lines");
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            f.getContentPane().add(new ConnectionPanel());
            f.setSize(400,300);
            f.setLocation(200,200);
            f.setVisible(true);
    class ConnectionPanel extends JPanel
        JLabel label1, label2, label3, label4;
        JLabel[] labels;
        JLabel selectedLabel;
        int cx, cy;
        public ConnectionPanel()
            setLayout(null);
            addLabels();
            label1.setBounds( 25,  50, 125, 25);
            label2.setBounds(225,  50, 125, 25);
            label3.setBounds( 25, 175, 125, 25);
            label4.setBounds(225, 175, 125, 25);
            determineCenterOfComponents();
            ComponentMover mover = new ComponentMover();
            addMouseListener(mover);
            addMouseMotionListener(mover);
        public void paintComponent(Graphics g)
            super.paintComponent(g);
            Graphics2D g2 = (Graphics2D)g;
            g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                                RenderingHints.VALUE_ANTIALIAS_ON);
            Point[] p;
            for(int i = 0; i < labels.length; i++)
                for(int j = i + 1; j < labels.length; j++)
                    p = getEndPoints(labels, labels[j]);
    //g2.draw(new Line2D.Double(p[0], p[1]));
    private Point[] getEndPoints(Component c1, Component c2)
    Point
    p1 = new Point(),
    p2 = new Point();
    Rectangle
    r1 = c1.getBounds(),
    r2 = c2.getBounds();
    int direction = r1.outcode(r2.x, r2.y);
    switch(direction) // r2 located < direction > of r1
    case (Rectangle.OUT_LEFT): // West
    p1.x = r1.x;
    p1.y = r1.y;
    p2.x = r2.x + r2.width;
    p2.y = r2.y;
    if(r1.y > cy)
    p1.y = r1.y + r1.height;
    p2.y = r2.y + r2.height;
    break;
    case (Rectangle.OUT_TOP): // North
    p1.x = r1.x;
    p1.y = r1.y;
    p2.x = r2.x;
    p2.y = r2.y + r2.height;
    if(r1.x > cx && r2.x > cx)
    p1.x = r1.x + r1.width;
    p2.x = r2.x + r2.width;
    break;
    case (Rectangle.OUT_LEFT + Rectangle.OUT_TOP): // NW
    p1.x = r1.x;
    p1.y = r1.y;
    p2.x = r2.x + r2.width;
    p2.y = r2.y;
    if(r1.y > r2.y + r2.height)
    p2.y = r2.y + r2.height;
    break;
    case (Rectangle.OUT_RIGHT): // East
    p1.x = r1.x + r1.width;
    p1.y = r1.y;
    p2.x = r2.x;
    p2.y = r2.y;
    if(r1.y > cy)
    p1.y = r1.y + r1.height;
    p2.y = r2.y + r2.height;
    break;
    case (Rectangle.OUT_TOP + Rectangle.OUT_RIGHT): // NE
    p1.x = r1.x + r1.width;
    p1.y = r1.y;
    p2.x = r2.x;
    p2.y = r2.y;
    if(r1.y > cy)
    p1.y = r1.y + r1.height;
    p2.y = r2.y + r2.height;
    if(r1.y > r2.y + r2.height)
    p1.y = r1.y;
    else
    if(r1.y > r2.y + r2.height)
    p2.y = r2.y + r2.height;
    break;
    case (Rectangle.OUT_BOTTOM): // South
    p1.x = r1.x;
    p1.y = r1.y + r1.height;
    p2.x = r2.x;
    p2.y = r2.y;
    if(r1.x > cx && r2.x > cx)
    p1.x = r1.x + r1.width;
    p2.x = r2.x + r2.width;
    break;
    case (Rectangle.OUT_RIGHT + Rectangle.OUT_BOTTOM): // SE
    p1.x = r1.x + r1.width;
    p1.y = r1.y + r1.height;
    p2.x = r2.x;
    p2.y = r2.y;
    break;
    case (Rectangle.OUT_BOTTOM + Rectangle.OUT_LEFT): // SW
    p1.x = r1.x;
    p1.y = r1.y + r1.height;
    p2.x = r2.x;
    p2.y = r2.y;
    if(r1.x > r2.x + r2.width)
    p2.x = r2.x + r2.width;
    if(r1.x > cx && r2.x > cx)
    p1.x = r1.x + r1.width;
    p2.x = r2.x + r2.width;
    return new Point[] {p1, p2};
    private void determineCenterOfComponents()
    int
    xMin = Integer.MAX_VALUE,
    yMin = Integer.MAX_VALUE,
    xMax = 0,
    yMax = 0;
    for(int i = 0; i < labels.length; i++)
    Rectangle r = labels[i].getBounds();
    if(r.x < xMin)
    xMin = r.x;
    if(r.y < yMin)
    yMin = r.y;
    if(r.x + r.width > xMax)
    xMax = r.x + r.width;
    if(r.y + r.height > yMax)
    yMax = r.y + r.height;
    cx = xMin + (xMax - xMin)/2;
    cy = yMin + (yMax - yMin)/2;
    private class ComponentMover extends MouseInputAdapter
    Point offsetP = new Point();
    boolean dragging;
    public void mousePressed(MouseEvent e)
    Point p = e.getPoint();
    for(int i = 0; i < labels.length; i++)
    Rectangle r = labels[i].getBounds();
    if(r.contains(p))
    selectedLabel = labels[i];
    offsetP.x = p.x - r.x;
    offsetP.y = p.y - r.y;
    dragging = true;
    break;
    public void mouseReleased(MouseEvent e)
    dragging = false;
    public void mouseDragged(MouseEvent e)
    if(dragging)
    Rectangle r = selectedLabel.getBounds();
    r.x = e.getX() - offsetP.x;
    r.y = e.getY() - offsetP.y;
    selectedLabel.setBounds(r.x, r.y, r.width, r.height);
    determineCenterOfComponents();
    repaint();
    private void addLabels()
    label1 = new JLabel("Label 1");
    label2 = new JLabel("Label 2");
    label3 = new JLabel("Label 3");
    label4 = new JLabel("Label 4");
    labels = new JLabel[] {
    label1, label2, label3, label4
    for(int i = 0; i < labels.length; i++)
    labels[i].setHorizontalAlignment(SwingConstants.CENTER);
    labels[i].setBorder(BorderFactory.createEtchedBorder());
    add(labels[i]);

    If you need some help, be respectful of the forum rules and people will help. By using "urgent" in the title and bumping your message every 2 hours you're just asking to be ignored (which is what you ended up with).

  • Your urgent help will be very much appreciated

    I have a problem whenever I connect my database and need your urgent help. the sample source code is below
    import java.sql.*;
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.util.*;
    public class Table extends JFrame
    private Connection con;
    private JTable table;
    public Table()
         String url = "jdbc:odbc:Books";
         String username="";
         String password="";
         try{
         Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
         con = DriverManager.getConnection(url, username, password);
         catch(ClassNotFoundException cnfex)
         System.err.println("Failed to load JDBC/ODBC driver.");
         cnfex.printStackTrace();
         System.exit(1);
         catch(SQLException sqlex)
         System.err.println("Failed to connect");
         sqlex.printStackTrace();
         getTable();
         setSize(45,150);
         show();
    public void getTable()
         Statement state;
         ResultSet result;
         try{
         String query="Select * from Author";
         state=con.createStatement();
         result=state.executeQuery(query);
         displayResult(result);
         state.close();
         catch(SQLException sqlex)
         sqlex.printStackTrace();
    public void displayResult(ResultSet rs)throws SQLException
    boolean moreRecord=rs.next();
    if (!moreRecord)
    JOptionPane.showMessageDialog(this, "ResultSet contained no record");
    setTitle("No records to display");
    return;
    setTitle("Author table from Books");
    Vector columnHeads=new Vector();
    Vector rows=new Vector();
    try{
    ResultSetMetaData rsmd=rs.getMetaData();
    for (int i=1; i<=rsmd.getColumnCount(); i++)
    columnHeads.addElement(rsmd.getColumnName(i));
    do{
    rows.addElement(getNextRow(rs, rsmd));
    }while(rs.next());
    table=new JTable(rows, columnHeads);
    JScrollPane scroller=new JScrollPane(table);
    getContentPane().add(scroller,BorderLayout.CENTER);
    validate();
    catch(SQLException sqlex)
    sqlex.printStackTrace();
    public Vector getNextRow(ResultSet rs, ResultSetMetaData rsmd)
              throws SQLException
    Vector currentRow=new Vector();
    for (int i=1; i<=rsmd.getColumnCount(); i++)
    switch (rsmd.getColumnType(i))
    case Types.VARCHAR:
         currentRow.addElement(rs.getString(i));
         break;
         case Types.INTEGER:
         currentRow.addElement(new Long(rs.getLong(i)));
         break;
    default:
    System.out.println("Type was: "+rsmd.getColumnTypeName(i));
    return currentRow;
    public void shutDown()
         try{
         con.close();
         catch(SQLException sqlex)
         System.err.println("Unable to disconnect");
         sqlex.printStackTrace();
    public static void main(String args[])
         final Table app=new Table();
         app.addWindowListener( new WindowAdapter()
         public void windowClosing(WindowEvent e)
              app.shutDown();
              System.exit(0);

    Thank you for your help. When I compile it, it is fine, the problem happens when run it.
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6d448d54
    Function name=(N/A)
    Library=C:\Program Files\JavaSoft\JRE\1.3.1_05\bin\hotspot\jvm.dll
    NOTE: We are unable to locate the function name symbol for the error
    just occurred. Please refer to release documentation for possible
    reason and solutions.
    Current Java thread:
    at sun.jdbc.odbc.JdbcOdbc.driverConnect(Native Method)
    at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbcConnection.initialize(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbcDriver.connect(Unknown Source)
    at java.sql.DriverManager.getConnection(Unknown Source)
    at java.sql.DriverManager.getConnection(Unknown Source)
    at Table.<init>(Table.java:26)
    at Table.main(Table.java:145)
    Dynamic libraries:
    0x00400000 - 0x00405000 C:\WINNT\system32\java.exe
    0x77F80000 - 0x77FFB000 C:\WINNT\System32\ntdll.dll
    0x77D90000 - 0x77DED000 C:\WINNT\system32\ADVAPI32.dll
    0x77E60000 - 0x77F35000 C:\WINNT\system32\KERNEL32.DLL
    0x786F0000 - 0x78761000 C:\WINNT\system32\RPCRT4.DLL
    0x78000000 - 0x78046000 C:\WINNT\system32\MSVCRT.dll
    0x60000000 - 0x6003A000 c:\program files\rising\rav\ApiHook.dll
    0x05000000 - 0x0502E000 c:\program files\rising\rav\MemMon.dll
    0x77DF0000 - 0x77E55000 C:\WINNT\system32\USER32.dll
    0x77F40000 - 0x77F7C000 C:\WINNT\system32\GDI32.DLL
    0x75E00000 - 0x75E1A000 C:\WINNT\System32\IMM32.DLL
    0x6D420000 - 0x6D4F7000 C:\Program Files\JavaSoft\JRE\1.3.1_05\bin\hotsp
    ot\jvm.dll
    0x77530000 - 0x77560000 C:\WINNT\system32\WINMM.dll
    0x6D220000 - 0x6D227000 C:\Program Files\JavaSoft\JRE\1.3.1_05\bin\hpi.d
    ll
    0x6D3B0000 - 0x6D3BD000 C:\Program Files\JavaSoft\JRE\1.3.1_05\bin\verif
    y.dll
    0x6D250000 - 0x6D266000 C:\Program Files\JavaSoft\JRE\1.3.1_05\bin\java.
    dll
    0x6D3C0000 - 0x6D3CD000 C:\Program Files\JavaSoft\JRE\1.3.1_05\bin\zip.d
    ll
    0x6D020000 - 0x6D12A000 C:\Program Files\JavaSoft\JRE\1.3.1_05\bin\awt.d
    ll
    0x777C0000 - 0x777DE000 C:\WINNT\system32\WINSPOOL.DRV
    0x75010000 - 0x75020000 C:\WINNT\system32\MPR.DLL
    0x77A30000 - 0x77B25000 C:\WINNT\system32\ole32.dll
    0x6D1E0000 - 0x6D21B000 C:\Program Files\JavaSoft\JRE\1.3.1_05\bin\fontm
    anager.dll
    0x6DD30000 - 0x6DD36000 C:\WINNT\System32\INDICDLL.dll
    0x37210000 - 0x3723D000 C:\WINNT\DOWNLO~1\CnsMin.dll
    0x77C50000 - 0x77C9A000 C:\WINNT\system32\SHLWAPI.dll
    0x777E0000 - 0x777E7000 C:\WINNT\system32\VERSION.dll
    0x75950000 - 0x75956000 C:\WINNT\system32\LZ32.DLL
    0x6D290000 - 0x6D29A000 C:\Program Files\JavaSoft\JRE\1.3.1_05\bin\JdbcO
    dbc.dll
    0x1F7F0000 - 0x1F825000 C:\WINNT\system32\ODBC32.dll
    0x76AF0000 - 0x76B2D000 C:\WINNT\system32\comdlg32.dll
    0x77B30000 - 0x77BB9000 C:\WINNT\system32\COMCTL32.DLL
    0x78F90000 - 0x791D6000 C:\WINNT\system32\SHELL32.DLL
    0x1F8E0000 - 0x1F8F6000 C:\WINNT\system32\odbcint.dll
    0x77900000 - 0x77923000 C:\WINNT\system32\imagehlp.dll
    0x72960000 - 0x7298D000 C:\WINNT\system32\DBGHELP.dll
    0x687E0000 - 0x687EB000 C:\WINNT\system32\PSAPI.DLL
    Local Time = Tue Feb 25 21:33:38 2003
    Elapsed Time = 7
    # HotSpot Virtual Machine Error : EXCEPTION_ACCESS_VIOLATION
    # Error ID : 4F530E43505002BD
    # Please report this error at
    # http://java.sun.com/cgi-bin/bugreport.cgi
    # Java VM: Java HotSpot(TM) Client VM (1.3.1_05-b02 mixed mode)
    # An error report file has been saved as hs_err_pid1792.log.
    # Please refer to the file for further information.
    #

  • Urgent help........lost every thing on my powerbook...............

    Hi,
    i need some urgent help.
    I just switched on my powerbook g4 couple of hours back, and to my shock, everything on my powefbook is LOST.
    If i open mail, it starts with the same informaton, that wecome to mal, set up ur a/c ,
    same with address book evrything gone, same welcome window
    same with itunes, welcome screen
    I am totally shocked.
    I literally donnt know what happened.
    The powerbook was on my table, i didnt even moved it since last night , when everything was ok, but now everything gone....
    the softwares were all auto updated couple of days back and the software running is 10.4.7 tiger.
    interestingly when i checked the updater, it says no new updates are available,
    also, when i checked the HDD space, it was 93 gb total, and 18 gb free which was possibly the hdd space left with me before this possible crash.
    I donnt know whats happening here,please ghelp me out of this.
    I just want to go back to the stage where i was yesterday night
    can anybody help me on this
    Thanks in advance
    Ashish

    Hi,
    firstly, i must thank you for reminding me to backup my data as i had never done that except for the photographs i click( take back up on external drive) as me being a photographer.
    now the issur.....
    i went to macintosh hd > Library > and in that there is a folder , " ashishbahl" which being the name of my powerbook admin .
    now the size of that folder is showing as 59.9 Gb.
    in that "ashishbahl" folder i am seeing a desktop folder which has all the files which were there on my desktop before this ctrash.
    now i am just not able to figure out how all this happened and now that i have located this folder , how to restore my system.
    thanks
    Ashish

  • Urgent Help! Errors in source system(RSM     340)

    Need urgent help. Issue in production.
    I added fields to the COPA datasource, by changing the operating concern. I recreated the datasource with the same name replicated into BW & ran delta again. The whole procedure worked fine in Dev & Quality but in production it gives me the below error. I thought its a delta issue so I deleted the data & try reload but still same issue. Below is the error. I checked the connection with R3. its an ok. All other loads work fine. Before deleting delta, it gives below error & when you rerun, it finishes with zero records. I also tried activating update, transfer & ods & cube in BW. I also asked functional guy to check operating concern & its active. kindly help
    Errors in source system     RSM     340
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.

    Hi PK,
    caller 09 error mainly because of source(target system) and destination(bw system) not configured correctly.
    i think you get the error message as follows. file is in the client workstation as like.
    better you contact basis people. they will resolve this.
    hope this help you
    Regards
    Harikrishna N

  • IIOP and firewalls - urgent help!!!

    Hello there,
    we have problems connecting with a Java applet to BC4J deployed as EJBs in an OracleJVM (Oracle9i AS 1.0.2) over IIOP throu a firewall. Is anyone out there who can help us? We need urgent help!!!
    Thanks in advance!
    Stefan
    null

    AFAIK, you have only three options:
    1. Configure your IIOP connection to use an existing open port on the firewall (e.g., port 80 which is usually reserved for HHTP protocol) - THIS IS A BAD IDEA
    2. Configure the firewall to allow inbound traffic on the IIOP port you are using (Oracle uses 2481 by default) - this is fine if you control the firewall.
    3. Wrap your EJB client code in a servlet and communicate from the applet to the servlet via HTTP. This is the normal "firewall-puncturing" approach (aka "tunneling").
    John H.

  • Urgent help requested- MSS

    Hello people,
    consider the following scenario
    work flow is getting triggered to the Line manager (chief) and so on to next agents
    How can we make use of substitution in following scenarios
    scenario1- planned leave by Line manager (I think this can be done using substitution in MSS)
    Scenario 2- Unplanned leave by Line manager
    scenario 3- position of Line manager is vacant
    The workflow i am using is not a standard woprkflow.
    The above scenarios are applicable in case of leave approval and trip request approval.
    Urgent help appreciated.
    Thx

    Forgive if the terms are not excact - my system is not in English.
    For scenario 1: Use substitution rule "receives my tasks" when setting up substitutions in the uWL
    For scenario 2: All managers should have a substitution rule "is my substitute".  Then the substitute can go into the substitution rule and take over the tasks.  This can then be discontinued when manager is back
    For scenario 3: Switch WFLOW VAPOS = X  determines the behaviour when manager position is empty. .  For some reason the switch is not there in standard - but we set it just for this scenario. The Workflow then checks up the hierachy and finds the next manager.
    /Kirsten

  • Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

    Hello Guys,
    We are in Designing phase Data Modeling of PDW/APS Implementation Project.
    I need urgent help in making a checklist from a DBA perspective.
    Like what are things ill be needing at a time of implementation/Deployment.
    Your expert comments and help will be highly appreciated.
    Thank you,
    Anish.S
    Asandeen

    You can get good summary of checklist from this article about
    DBA checklist for data warehousing.
    Which highlights on below pointers:
    New system or old. (I.e. Up-gradation vs starting from scratch)
    Complexity of SQL Server architecture 
    SQL Server storage
    Determining SQL Server processing power
    SQL Server installation consideration 
    SQL Server configuration parameter
    SQL Server security
    SQL Server Database property
    SQL Server jobs and automation
    Protecting SQL Server data
    SQL Server health monitoring and check ups
    SQL Server ownership and control 
    based on my real time experience, I will suggest you to keep an eye on 
    Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
    System availability (Check for Windows update and up time configuration) 
    Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
    Source control mechanism 
    Disk space and memory usage
    You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
    Proper implementation of Landing , Staging and Mart tables.
    Column size (this can drastically decrease your database size)
    Usage of indexes (Index are good, but at what cost?)
    I hope this will assist you in building your check list.

Maybe you are looking for