URGENT -- Help wanted for ADF/UIX
Hi,
I am a newbie in this field -- so any help would be greatly appreciated. Following is the scenario that I am struggling with:
I've two tables, Customer(ID and Name are the columns) and Address (ID (foreign key from customer), address, city are the columns).
I want to be able to display all the fields of Customer and Address table on the same page as a input form and let the user have the ability to enter the customer and address at the same time. On Submit, I want to first save the data into the customer table and then the address information in the address table.
I tried to use UIX and tried dropping in CustomerAddress View in the page, but all I get are the labels, no input fields.
Can anyone please suggest what should I do?? Thanks in advance.
Jatinder
Did you ever figure this out?
Jeanne
Similar Messages
-
Urgent help needed for XML Tags using XMLForest()
Folks
I need some urgent help regarding getting use defined tag in your
XML output.
For this I am using XMLElement and XMLForest which seems to work fine
when used at the SQL prompt but when used in a procedure throws and error
SQL> Select SYS_XMLAGG(XMLElement("SDI",
XMLForest(sdi_num)))
From sdi
where sdi_num = 22261;- WORKS FINE
But when used in a procedure,doesnt seem to work
Declare
queryCtx DBMS_XMLQuery.ctxType;
v_xml VARCHAR2(32767);
v_xmlClob CLOB;
BEGIN
v_xml:='Select SYS_XMLAGG(XMLElement("SDI",
XMLFOREST(sdi_num)))
From sdi
where sdi_num = 22261';
queryCtx :=DBMS_XMLQuery.newContext(v_xml);
v_xmlClob :=DBMS_XMLQuery.getXML(queryCtx);
display_xml(v_xmlClob);
End;
CREATE OR REPLACE PROCEDURE display_xml(result IN OUT NOCOPY CLOB)
AS
xmlstr varchar2(32767);
line varchar2(2000);
BEGIN
xmlstr:=dbms_lob.SUBSTR(result,32767);
LOOP
EXIT WHEN xmlstr is null;
line :=substr(xmlstr,1,instr(xmlstr,chr(10))-1);
dbms_output.put_line('.'||line);
xmlstr := substr(xmlstr,instr(xmlstr,chr(10))+1);
END LOOP;
end;
SQL> /
.<?xml version = '1.0'?>
.<ERROR>oracle.xml.sql.OracleXMLSQLException: Character ')' is not allowed in an
XML tag name.</ERROR>
PL/SQL procedure successfully completed.
SQL>HELP is appreciated as to where I am going wrong?Hi,
if you want to transform something to something else, you should declare, what is your source.
I would prefer to use plain XSL-Transformations, because you have a lot more options to transform your source and you can even better determine, how your output should looks like.
Kind regards,
Hendrik -
Urgent Help Required for Connect Four Game
Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
int player1;
int player2;
public PlayGame()
//this.player1 = player1;
//this.player2 = player2;
public void StartGame()
try{
// int X = 0, Y = 0;
//int value;
int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
int[][] ConnectFourArray = new int[6][7];
int num1, num2;
for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
//Player player1;
//Player player2;
public ClassConnectFour()
//this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end class
I am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda
//Hi,
Thanks for your help but I really don't understand the table lookup algorithm. Could you please send me some code to implement that.
I will send you the formatted code as well
Thanks for your help.
looking forward to your reply.
Koonda
Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
int player1;
int player2;
public PlayGame()
//this.player1 = player1;
//this.player2 = player2;
public void StartGame()
try{
// int X = 0, Y = 0;
//int value;
int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
int[][] ConnectFourArray = new int[6][7];
int num1, num2;
for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
//Player player1;
//Player player2;
public ClassConnectFour()
//this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end classI am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda -
Schema sychronization for ADF/UIX
Question...
What are the steps necessary in propagating schema changes throughout my ADF/UIX web application.
I ask because we've added a new column to our database, and I thought that I synchronized my project everywhere. However, my UIX control can read the data from the new column, but any updates don't seem to be committed.is this an input-form ?
I think you need to create a binding for the new attribute in the UIModel file.
the easiest way is to drag'n'drop the new attribute on to your form. -
Urgent help needed for hysterical female!
I need urgent help in editing a pic that has been emailed to me, I do not know which Adobe programme to upload it too. Currently use Picasso - usually brilliant, but now gets jammed with a pop up box asking me to either accept or deny picnik. When I googled picnik, it now belongs to Google - don't know how to do a damn thing now!! Extremely Frustrated, can anybody suggest/help me
The only Adobe program I know that can edit images is Photoshop.
If you have troubles with Google software, you need to post in the appropriate Google forum. -
Script for color space conversion RGB to CMYK - URGENT Help Wanted
Excuse my ignorance with the basic nature of this question, I don't use InDesign, but I do have a pressing problem regarding it.
My book publisher has just emailed to say that my photography book has been set for the printers in InDesign and the photographs have AdobeRGB color space (which was what I was aksed to send.) The printer needs the images to be in CMYK. The publisher said that he was "pretty sure Adobe Acrobat converts the InDesign files to CMYK" and that he has sent the printer RGB images in the past and they "came out OK". He said that if this will not work, he needs to convert all of the images separately to CMYK.
Can you help with the following:
1. Is he right about the above - can Adobe Acrobat convert the files?
2. Can anyone offer me a script that will convert all of the images in InDesign to CMYK? or will he need to change them individually?
Thanks for any suggestions with this urgent request.
Stephen1. Acrobat can convert.
2. No need for a script, if the printer needs CMYK, you can export a CMYK pdf.
3. To get the highest quality conversions, you might want to do it in Photoshop.
4. If the images are color managed and the printer has a modern work-flow a color managed RGB PDFX-4 pdf is probably the best way to go...
Harbs -
Urgent Help Required for Unified wireless network help
Dear Community
i need urget help for a wireless unified network setup to deploy it in a college
actually what is the senario for this network that i have a WLC 5500 and 12 lwapp 1252 series APs for this deployment ant there is allready an existing lan
network to connect with it the new wireless unified setup.
here is above proposed topology .
i need help for this setup like
i know the basic configuration on controller to do but i really do not know that from GUI what steps i need to configure on controller for each access points as you can see above i have three floors for building and i want to configur three SSIDs like Employ,contractors and Guest for each floor and how to configure encryption type and shared key for each SSiD.
and what i have to configure for APs to join them with controller
and hoe to configure RF grouping for each floor.
please i need urgent reply because i have tp finish this all setup in one weekonly
thans in advance.Hi,
Wat ever you want.. the below link has everything.. Just click on the stuff that you neeed fro mthe menu and this will do it for you!!
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70.html
1>> Configure WLANs.
2>> Configure AP Grouping.
Regards
Surendra -
Urgent help required for network configuration
sir
i have a mixed scenario right now.
I have only three computer on home network.
1.vista accer travelmate 4720 laptop loaded with vista sp1 ultimate
2.normal pc : Core2 duo with XFX ATI REDION graphics card and this pc is loaded with OEL 5.3.x linux but this pc has 2 NICs(eth 0,eth 1) I have connected both with a switch and the switch is connected to a modem for internet.can I use one NIC as private and another NIC as public to access internet?
3. normal pc : P4 HT and its loaded with win xp sp2 having eth 0
how to set my network.
I have connected each NIC with a D-Link switch.And the D-Link switch is connected with DataOne Nokia Siemens network c2110 modem.
But problems are that
1) each time i can connect only one PC at a time.
2)OEL 5.3.x is not connected to the specified modem ever....by [adsl seup|http://forums.oracle.com/forums/thread.jspa?threadID=832112&tstart=0] command.should i configure it during installation?is there any easy shell scriot avilable to do this stuff?
please help as soon as you can.......
regards
Edited by: mango_boy on Sep 7, 2009 4:44 AMifconfig output:
eth1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:243 (243.0 b) TX bytes:9406 (9.1 KiB)
Interrupt:16 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3779 errors:0 dropped:0 overruns:0 frame:0
TX packets:3779 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6124500 (5.8 MiB) TX bytes:6124500 (5.8 MiB)
virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:8360 (8.1 KiB)
xenbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)adsl-setup output
[root@localhost ~]# adsl-setup
Welcome to the ADSL client setup. First, I will run some checks on
your system to make sure the PPPoE client is installed properly...
LOGIN NAME
Enter your Login Name (default root): kris_9929
INTERFACE
Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): eth1
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no):
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: server
PASSWORD
Please enter your Password:
Please re-enter your Password:
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): yes
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
Choose a type of firewall (0-2): 1
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):no
** Summary of what you entered **
Ethernet Interface: eth1
User name: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Activate-on-demand: No
DNS addresses: Supplied by ISP's server
Firewalling: STANDALONE
User Control: yes
Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
(But first backing it up to /etc/ppp/chap-secrets.bak)
(But first backing it up to /etc/ppp/pap-secrets.bak)
Congratulations, it should be all set up!
Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status.Edited by: mango_boy on Sep 7, 2009 9:02 AM
added adsl setup output
Edited by: mango_boy on Sep 7, 2009 9:15 AM -
Urgent Help Required for Check Box in Table Column
Hi all,
Could any body help me to solve my problem?
First of all I have created a table whose one column is check box. The column of the tables are Name,Phone,ID,Address and a checkBox columns.In one view
the table will be found with data. I want to click on some of the rows(suppose there are 5 rows, but based on some condition I have selected the check box of 3 rows).
Next there will be a button(Supose SEND Button).
After selecting the check box I want to press that button and then a new window will come which will show two tables. one for selected rows(with the same columns name except check box) and another for Unchecked rows with the same column name(Name,Phone,ID,Address).
Could any body help me by sending the details and code?
Thanks and Regards.
SudipHi Sudip,
1) create custom controller and appropriate context structure there (dataNode(Name,Phone,ID,Address,Check))
2) create view StartView. Map data node from custom controller to node in view. Create table and bind context node attributes to appropriate table columns.
3) create view ResultView. Map data node from custom controller to node in view. Create 2 nodes (CheckedData, UncheckedData) with supply methods. Create filtering implementation in supply methods (add checked and unchecked node elements to appropriate nodes).
4) create new window with resultView as default view
4) in startView in button action handler put something like
IWDWindowInfo _windowInfo = wdComponentAPI.getComponentInfo().findInWindows("Popup");
IWDWindowManager manager = wdComponentAPI.getWindowManager();
IWDWindow _window = manager.createWindow(_windowInfo, true);
_window.open();
So, just tried localy and it works.
Best regards, Maksim Rashchynski. -
Urgent help required for sms messages
i need help urgently...i havea legal case comming up shortly and need my sms messages from my old lawyer off my phone for the court. as they will be evidence, and i cannot find a way to do this i need them on to a sim. how do i do this please. i do not have BIS service so i cannot send them like that....Help please thanks
I haven't figured out how to get them onto your SIM card yet - but it may be a good idea for you to "back them up" by marking them all "saved." They would then be more secure
Phil -
Urgent: Help required for fetching CHILDNODE from an XML schema.
Hi All,
Good Morning to all, i have problem in extracting the child node name. I have created a xml schema say "emrxmlsample3.xsd" based on this schema i have created a xmltype table and inserted a value to the table. I have a problem in fetching the "CHILDNODE" name. Kindly help me in solving this problem. Here by i am posting all the workings i have done...
I am using the following client:
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 31 11:44:59 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
////////////////////////////////// XML Schema ///////////////////////
begin
dbms_xmlschema.registerSchema(
'http://www.oradev.com/emrxmlsample3.xsd',
'<schema xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.oradev.com/emrxmlsample3.xsd"
xmlns:samp="http://www.oradev.com/emrxmlsample3.xsd"
version="1.0">
<element name="HISTORY">
<complexType>
<sequence>
<element name="HPI">
<complexType>
<sequence>
<element name = "PAIN">
<complexType>
<sequence>
<element name = "SET">
<complexType>
<sequence>
<element name = "LOCATION">
<complexType>
<sequence>
<element name = "HEAD" type = "string"/>
<element name = "NECK" type = "string"/>
<element name = "BACK" type = "string"/>
<element name = "CHEST" type = "string"/>
<element name = "ABDOMEN" type = "string"/>
<element name = "JOINTS" type = "string"/>
<element name = "OTHERS" type = "string"/>
</sequence>
</complexType>
</element>
<element name = "SEVERITY">
<complexType>
<sequence>
<element name = "MILD" type = "string"/>
<element name = "MODERATE" type = "string"/>
<element name = "SEVERE" type = "string"/>
<element name = "VERYSEVERE" type = "string"/>
</sequence>
</complexType>
</element>
<element name = "CHARACTER">
<complexType>
<sequence>
<element name = "DIFFUSE" type = "string"/>
<element name = "PRICKING" type = "string"/>
<element name = "CUTTING" type = "string"/>
<element name = "PIERCING" type = "string"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
</schema>',
TRUE, TRUE, FALSE, FALSE);
end;
////////////////////////// Table which has multiple Column //////////////////////////
CREATE TABLE chipsemr3 (
id number, CHIPSEMR XmlType)
XMLTYPE CHIPSEMR STORE AS OBJECT RELATIONAL
XMLSCHEMA "http://www.oradev.com/emrxmlsample3.xsd"
ELEMENT "HISTORY";
///////////////////////////////// Insert Query in chipsxmltable //////////////////////////
INSERT INTO chipsemr3 VALUES(1,
xmltype.createxml('<?xml version="1.0"?>
<samp:HISTORY xmlns:samp="http://www.oradev.com/emrxmlsample3.xsd" >
<HPI>
<PAIN>
<SET>
<LOCATION>
<HEAD> YES </HEAD>
<NECK> NO </NECK>
<BACK> N </BACK>
<CHEST> N </CHEST>
<ABDOMEN> N </ABDOMEN>
<JOINTS> N </JOINTS>
<OTHERS> N </OTHERS>
</LOCATION>
<SEVERITY>
<MILD> N </MILD>
<MODERATE> N </MODERATE>
<SEVERE> N </SEVERE>
<VERYSEVERE> N </VERYSEVERE>
</SEVERITY>
<CHARACTER>
<DIFFUSE> N </DIFFUSE>
<PRICKING> N </PRICKING>
<CUTTING> N </CUTTING>
<PIERCING> N </PIERCING>
</CHARACTER>
</SET>
</PAIN>
</HPI>
</samp:HISTORY>'));
To show the Root Node Name:
1. Query
select x.CHIPSEMR.getrootelement() CHIPSNODES from chipsemr3 x, table(xmlsequence(x.CHIPSEMR.extract('//node()'))) x
Apologies if the description is not clear. Kindly let me know if further details are needed. Many thanks for your help.
Very best regards,
Godwin Jebakumar C.V.Hi,
I'm not sure what you want actually.
You can get all elements names with :
SELECT value(x).getRootElement() chipsnodes
FROM chipsemr3 t,
TABLE(
XMLSequence(
Extract(t.chipsemr, '//*')
) x
;or, starting with 10.2 :
SELECT x.*
FROM chipsemr3 t,
XMLTable(
'for $i in //* return local-name($i)'
passing t.chipsemr
columns chipsnode varchar2(30) path '.'
) x
; -
Urgent help required for update Plz help!!
Hi i am updating my E51 and its displaying updating software please wait estimated time left 15 minutes for the past 1 hour.
Please tell me what should i do....
Its really urgent pls help....Hi,
There might be a problem with either the NSU or the phone itself. Any updates on what happened?
Next time make sure you meet the certain system requirements before proceeding with the update.
Message Edited by nj15 on 01-Oct-2008 01:44 PM -
Please urgent help needed for the following
Hi Everybody!
I desperately need help as soon as possible.
Following is the partial code for the driver program which will use the Employee class Objects(Employee is declared abstract). If you want to see whole code you can take a look at my last two or three posts in this forum.
1- Now data input by the user in the specific field( name, rate ) should be displayed in the �List� at the top of the frame after pressing �Enter� key. Can anyone help me to achieve this functionality. While doing this keep in mind the capacity of Array
2- I also need �rate� textfield to enabled initially & become disable when �raise� (for trigerring calculating raise in weekly pay) is checked. On this �increased� textbox will become �enabled� which was disabled initially.
3- The stuff which may have the problems is followed by �*******************�.
// here is how I declared handlers
ActionEventHandler handler = new ActionEventHandler();
ItemEventHandler listener = new ItemEventHandler();
// here is the declaration of awt components which are going to be placed on Frame.
public class ActionEventHandler implements ActionListener
public void actionPerformed(ActionEvent event)
//if(event.getSource() == enterButton)
for (int i = 0 ; i < empArray.length; i++)
if(event.getSource() == enterButton)
empData.add(nameField.getText());
/*else if(event.getSource() == hoursField)
calcWeeklyPay();
if(event.getSource() == clearButton)
nameField.setText("");
hoursField.setText("");
rateField.setText("");
increaseField.setText("");
}//else if
}//ActionEventHandler
public class ItemEventHandler implements ItemListener
public void itemStateChanged(ItemEvent event)
//if(event.getSource() == enterButton)
if(hEmployee.getState())
createHourly();
}//if
/*else
sEmployee.setState(true);
createSalaried();
}//else*/
else if(raiseSal.getState())
increaseField.setEnabled(true);
rateField.setEnabled(false);
}//itemStateChanged
}//ItemEventHandler
public void createHourly()
nameField.requestFocus();
//String name = nameField.getText();
double payRate = Double.parseDouble(rateField.getText());
double hours = Double.parseDouble(hoursField.getText());
empArray[empCreated] = new HourlyEmployee(nameField.getText(), payRate, hours);
currentEmp = empCreated;
empCreated++;
//empData.add(emp.toString());
enterButton.setLabel("add");
}//createHourly
/* public void createSalaried()
nameField.requestFocus();
//String name = nameField.getText();
double payRate = Double.parseDouble(rateField.getText());
double hours = Double.parseDouble(hoursField.getText());
empArray[empCreated] = new HourlyEmployee(nameField.getText(), payRate, hours);
currentEmp = empCreated;
empCreated++;
enterButton = new Button("add");
}//createSalaried*/
looking forward your kindnessVisit YAT-Yet Another Thread this is a discussion using the Sun book Core Java 2
and one part in that book uses an example with Employee class of which I assume you are stealing your class-name from. Anyway, that thread is in the Java forums. -
How tos - Multi Struts Config for ADF UIX (JDev10.1.2)
Has anyone tried the OTN How-tos for Multi Struts Config?
http://www.oracle.com/technology/products/jdev/howtos/10g/StrutsMultiConfigs/struts_multiconfig_howto.html
Well I tried doing it and am facing a lot of problems.
1. When I try to create a page in the child, it creates a duplicate page and hence two UIModels are created.
2. Also there is an extra directory created in the common public_html folder as child1/child1.
Could some one work that link out. I have failed to figure out what's going wrong.
My problem doesn't end there. The link tells us that we can create multi struts app, but how do we link the pages created in these applications together?
Regards,
VineetGoran,
a smarter way would be to use Virtual Private
Databases if the database is Oracle. This way you
don't have to bother within your application to do
this. We do have a VPD example in teh howtos for
JDeveloper 9i.Tnx for the suggestion, but I needed a solution within ADF.
If you want to do this on teh middle tier, use a bind
variable in the BC query and populate this through an
exposed method on the AM. I found even simpler solution... I let user choose an employee and fix this employee's id with a setCurrentRowWithKeyValue operation (drag-n-drop to a Data Action). Afterwards all the screens based on child view objects in the Data Control Palette hierarchy display only data from a fixed employee. -
Help wanted for modifying script
This is a new request following an answer from an earlier thread.
I have got written permition from Steve Wareham to use his script, and get it modifyed to suit my needs. I offered him to do the job for me, but he asked me to pass it on. I don't know anything about scripting, so I would like someone to do the job for me.
The script is this one from the earlier discussion no. 5799917, kindly modified and posted by Vandy88: http://forums.adobe.com/message/5799917#5799917
As mentioned in the end, I would like to recieve help on having the script modified to have another option in the dialogbox "Perform operation on" where I can chose a page range for the script to be affecting?
ie: From page ____ to page ____ .
I want to use this on long documents with step-by-step instructions, where I sometimes need to remove a step in the middle, and therefore need the numbers changed for the rest of the document. The textboxes with numbers are using Paragraph Styles and are not linked. Due to other reasons it is not a solution to just link the textflow.
I will pay a reasonable fee for help on this. Please include an estimate on the cost for re-scripting this.
It needs to work on InDesign CS6 (IE version) and preferable on CC too.This is a new request following an answer from an earlier thread.
I have got written permition from Steve Wareham to use his script, and get it modifyed to suit my needs. I offered him to do the job for me, but he asked me to pass it on. I don't know anything about scripting, so I would like someone to do the job for me.
The script is this one from the earlier discussion no. 5799917, kindly modified and posted by Vandy88: http://forums.adobe.com/message/5799917#5799917
As mentioned in the end, I would like to recieve help on having the script modified to have another option in the dialogbox "Perform operation on" where I can chose a page range for the script to be affecting?
ie: From page ____ to page ____ .
I want to use this on long documents with step-by-step instructions, where I sometimes need to remove a step in the middle, and therefore need the numbers changed for the rest of the document. The textboxes with numbers are using Paragraph Styles and are not linked. Due to other reasons it is not a solution to just link the textflow.
I will pay a reasonable fee for help on this. Please include an estimate on the cost for re-scripting this.
It needs to work on InDesign CS6 (IE version) and preferable on CC too.
Maybe you are looking for
-
Exchange email will only sync over WiFi on iPhone 6
Hello. We use iPhones with our Exchange 2010 SP3 servers for email through activesync. We've recently bought three iPhone 6 handsets and have set them up in exactly the same way as before - we have a mobileconfig file that runs users through the setu
-
Using a waveform graph, how to get all recorded data graphed?
I record data from 6 channels using DAQmx with simulated channels and write to measurement file. Then using read from measurement file, and waveform graph, I am trying to graph the data that has been recorded. I am only getting a small amount graph
-
Why can't Primary and Sub accounts be accessed on the same page?
I have a Primary email account and also a sub account. I normally use Windows Mail to access my email. In Windows Mail, I can read emails sent to either account, and can also send from either account. The only time I go to the Webmail page is when
-
Change FI doc number range indicator from internally to externally assigned
Hi, I created a new numberrange for 2011 but did not check the Ext (external number range indicator). When I try to change it to external by trying to mark the option, it does not work. What can cause this ?? Thanks in advance, regards Peter
-
Hi All, I have a problem by implementing note 70623. Whole solution mentioned in this not is quite complicated to me, (especially this table 'PT' is a misery to me - must be some shortcut but don't know which) so I wanted to ask whether someone does