URGENT!!! is "DDIM" Data class valid for the upgrade in BI 7.0

Hello,
We're working on the prepare steps before the PREPARE upgrade phase.
One of these steps is the rename of the Infocube data classes which don't follow the new naming convention.
We have all infocubes defined in DDIM and DFACT data classes.
Could someone tell me if I have to rename the DDIM data class in a new one for the upgrade?
Many thanks in advance

That's only valid for custom data classes.
DDIM & DFACT are SAP delivered and are still valid.

Similar Messages

[svn:bz-4.0.0_fixes] 20651: Some MBean tests needed flex.management. jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS 4 .0.0_fixes.

Revision: 20651
Revision: 20651
Author:   [email protected]
Date:     2011-03-07 12:21:11 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS 4.0.0_fixes.
Modified Paths:
    blazeds/branches/4.0.0_fixes/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validat ors.xml

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

[svn:bz-trunk] 20650: Some MBean tests needed flex.management. jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS trunk .

Revision: 20650
Revision: 20650
Author:   [email protected]
Date:     2011-03-07 12:20:03 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS trunk.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validators.xml

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

User validation for the BSP application

I wanted a user to access the bsp application.
I already have the user names maintained in the database who will be using the application.
i am using the application class for my application.
where should i do the user validation and how.
i know tst if i would had used the model class then i can do it in the request method of the model class.
but where to do it when using the application class.
Thanks

Hi Din,
I assume that the usernames that are present in your Database also exists in the WAS Server.
i.e. The database has a part of users that are present in the WAS Server.
Your need is to allow only those users in the database to access your bsp application and not others correct!
If your first BSP Page is a ...
View
1.In the DO_INIT method of the Corresponding Controller Class populate the internal table that is present in the Application Class with the usernames that are present in the database.
2. In the DO_REQUEST method of the Corresponding Controller Class check for the username who runs your BSP Application is present in the Database.
You can get the username who run the bsp application using the system field...
data: username type string.
username = sy-uname.
So if the username is in the database show your bsp page else show an error page.
You can directly check for the sy-uname is present in the database.
Page with Flow Logic
It is same as MVC only thing is that method name changes...
Place the code in the DO_INIT of MVC in onCreate of Page with Flow logic.(Populate the internal table of the application class with the usernames from the database)
Place the code in the DO_REQUEST of MVC in onRequest of Page with Flow logic.(Check whether the sy-uname is present in the itab or directly in the database).
Hope it solves your problem
Regards,
Maheswaran.B

No implementing class registered for the interface (ABAP interface, request

Hi,
Proxy has been generated for the Inbound Message interface and i could see the SXMB_MONI entry in Red on the target system.
I get the error "No implementing class registered for the interface (ABAP interface, request...."
regards,
Chaitanya

Hi Chaitanya,
Try the below configuration in SXMB_ADM,if you don't have the authorisations to SXMB_MONI ask BASIS guys to do the below activities.
Go to SXMB_ADM.
Execute Integration Engine
EDIT----
> Change Global configuration data
select Role of Business System as Integration Server
Thanks,
Amar.

No implementing class registered for the interface

Hello,
I know that I'm not the first one posting this problem, but I can't find an appropriate solution for my problem. When I execute the FlightSeatAvailabilityCheck scenario I got the following error:
Unable to check flight availability.
Error Type: XI system error
Error Details: No implementing class registered for the interface (type ifmmessif, name FlightSeatAvailabilityQuery_Out, namespace http://sap.com/xi/XI/Demo/Agency )
I have to say that I accidently deleted the proxy but I have recreated and activated the concerning proxy (CO_SXIDAG_FSA_QUERY) and still get the error. I read in this thread: XI 3.0 Demo: Unable to check flight availability: XI System Error that it would help to create a RFC in sm59. Why do I have to do this although I'm using proxies?
And does it make a difference in which client I create and activate the proxies?
Regards
Marc

i tried following solution also from old messages in SDN -
Go to SXMB_ADM.
Execute Integration Engine
EDIT-> Change Global configuration data
Select the Role of Business System is Integration Server
Again started getting error-PROXY_NOT_ALLOWED_ON_IS:
Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
But again one of the messages in SDN suggests to change Global configuration data,
EDIT-> Change Global configuration data
Select the Role of Business System is Application system.
it seems it's going in loop....

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

When trying to update my Apps I am being advised my account is not valid for the UK, I must switch to the Ireland store. How do I do this?

When trying to update or purchase Apps I am being advised my account is not valid for the UK Store and I must switch to the IReland store. How do I do this?

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done".

ITunes / AppStore problem: I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

credit card it tells me my credit card is not valid for the store.
Hi Don ...
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
The iTunes and Mac App Store are one in the same.
And check out this support article here > iTunes Store: My credit card's security code or zip code does not match my bank's records

How to get the date of Friday for the given week

HI,
I have a requirement to get the date of Friday for the given week.
Eg: I have an input of 200722 (Yearweek), From this I need to get the Date of the friday for this week 22 of Year 2007.
Plz let me know how to get this..
Thanks in advance..
Sridhar.

Hi,
Thanks for your reply...
I have implemented your logic but not getting exact output as required.
Suppose, If i give the input as 200720, I am getting an output as 18 (friday of week 20 of year 2007), but i need to get an output of 18.05.2007
Plz let me know how to do thdi.
Thanks in advance..

HT1311 I have done all of the above but when I try to update my Apps it still says that my ID is not valid for the US store and I must switch to the UK? My settings already say I am with the UK? What do I do?

I have done all of the above but when I try to update my Apps on my iphone it still says that my ID is not valid for the US store and I must switch to the UK? My settings already say I am with the UK? What do I do?

ok well like lllaass said, most apps require 4.3 or later iOS software. chances are since the apps worked before, the apps themselves got updated and will no longer work with your software version.

Data Recovery Software for the Zen Vision M

Data Recovery Software for the Zen Vision M:
Has anyone had any success recovering lost sound files from a Vision M, with software, physical repair services, or otherwise? Does anyone claim to be able to recover information from these devices?
The data recovery programs I have tried fail to recognize the dri've, since it doesn't show up in list of dri'ves for some reason (Is there a way to make this show up?). Any suggestions/ recommendations would be greatly appreciated as I lost over a year of recordings after an unexpected forced reformatting. How would one even go about finding someone for this job?
Thanks, GW

Haven't really tried the data recovery so I would like to know more about this one too.
http://storeyourpicture.com/images/s...lectronics.jpg

In Bdc I have huge volume of data to upload for the given transaction

Hi gurus,
In Bdc I have huge volume of data to upload for the given transaction, here am using session method, it takes lots of exection time to complete the whole transaction, Is there any other method to process the huge volume with minimum time,
reward awaiting
with regards
Thambe

Selection of BDC Method depends on the type of the requirement you have. But you can decide which one will suite requirement basing the difference between the two methods. The following are the differences between Session & Call Transaction.
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Batch Data Communication (BDC) is the oldest batch interfacing technique that SAP provided since the early versions of R/3. BDC is not a typical integration tool, in the sense that, it can be only be used for uploading data into R/3 and so it is
not bi-directional.
BDC works on the principle of simulating user input for transactional screen, via an ABAP program.
Typically the input comes in the form of a flat file. The ABAP program reads this file and formats the input data screen by screen into an internal table (BDCDATA). The transaction is then started using this internal table as the input and executed in the background.
In Call Transaction, the transactions are triggered at the time of processing itself and so the ABAP program must do the error handling. It can also be used for real-time interfaces and custom error handling & logging features. Whereas in
Batch Input Sessions, the ABAP program creates a session with all the transactional data, and this session can be viewed, scheduled and processed (using Transaction SM35) at a later time. The latter technique has a built-in error processing mechanism too.
Batch Input (BI) programs still use the classical BDC approach but doesnt require an ABAP program to be written to format the BDCDATA. The user has to format the data using predefined structures and store it in a flat file. The BI program then reads this and invokes the transaction mentioned in the header record of the file.
Direct Input (DI) programs work exactly similar to BI programs. But the only difference is, instead of processing screens they validate fields and directly load the data into tables using standard function modules. For this reason, DI programs are much faster (RMDATIND - Material Master DI program works at least 5 times faster) than the BDC counterpart and so ideally suited for loading large volume data. DI programs are not available for all application areas.
synchronous & Asynchronous updating:
http://www.icesoft.com/developer_guides/icefaces/htmlguide/devguide/keyConcepts4.html
synchronous & Asynchronous processings
Asynchronous refers to processes that do not depend on each other's outcome, and can therefore occur on different threads simultaneously. The opposite is synchronous. Synchronous processes wait for one to complete before the next begins. For those Group Policy settings for which both types of processes are available as options, you choose between the faster asynchronous or the safer, more predictable synchronous processing.
By default, the processing of Group Policy is synchronous. Computer policy is completed before the CTRLALTDEL dialog box is presented, and user policy is completed before the shell is active and available for the user to interact with it.
Note
You can change this default behavior by using a policy setting for each so that processing is asynchronous. This is not recommended unless there are compelling performance reasons. To provide the most reliable operation, leave the processing as synchronous.

How to Disable client side validation for the message text input

Hi,
I have scenario where i need to by pass the client side validation for a message text input
Scenario is
I have a message text input field(say XYZ), i set the max length for the item as 20
Now when im trying to enter the greek characters into it, it is allowing me to enter till 20 characters
But when i try to submit the form ..my client side validation is firing..
The Error says the XYZ is too long
The problem is, in greek each character takes two bytes.(In english it is only 1).While entering the content it allowing 20 characters and when validating it is checking for bytes(if we enter in greek the length will be 40 bytes not 20)
I cannot increase the max length .coz i have restrict the character length to 20 only.(english or Greek).
Please help me in this regard.
Regards
Sandeep.

Thanks for the information.But we dont have any option either declaratively or programatically to disable the client side validation for the message text input..I referred java docs ..i dint find any method which does..
Correct me if im wrong

How to create a validation for the project coding mask

Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?

Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh

URGENT!!! is "DDIM" Data class valid for the upgrade in BI 7.0

Similar Messages

Maybe you are looking for