URGENT issue with testing movie / publishing

hello, i am creating a presentation for my coworker in flash.  let me start by saying i am in no way familiar with this program.  i am planning on learning more, but for now my task is specific to this assisgnment. 
basically i have one large timeline the is the background.  this image moves around and then i have a number of jpegs that i've inserted that appear and dissapear at certain frames.  i have a next and previous button inserted in and code that tells those buttons what frames to go to.  my coworker then makes his presentation and can move linearly through his presentation. 
i have now completely inserted all of the content in.  it's about 1000 frames, 100mb and around 40 or so imported images.  for some reason i can't seem to test the movie or publish it.  when i try to do those things, the box comes up saying exporting swf and then the bar doesn't move all the way across.  it closes and nothing is exported.
any suggestions would be immensely appreciated.  this is a deadline sensitive project and frankly i have nowhere else to turn. 
are there any file restricitons or limitations i'm not aware of?
thank you in advance for your help and for taking the time to read this.

Lots of variables so it's very hard to say what the problem is.
My suggestion is to cut the timeline into pieces (just 200 frmaes or so) and test various sections Use only as much actionscript as needed to navigate to the first 200 frames or so... see if one particular section is a problem... if even small sections don't work, then size had nothing to do with it.
Then put 400 frames together and test again... then 600, etc.
Best wishes,
Adninjastrator

Similar Messages

  • Urgent issue with Intrastat

    Hi All, we  have  very  urgent issue  with  intrastat report ''VE01''.
    There  is  many documents  with error Log-''The statistical value of the document item is zero.''.
    The pricing  settings looks OK and its impossible  to
    correct  those  documents with error.
    Any Idee how I could  correct them for  them  to  get  the  green status?
    Points  will be added  if  helpful
    Thanks and regards
    Luis

    Hello Luis,
    please check the VBRP-BRTWR. If this fiels is zero then you get an entry in the incompletion log.
    the message could be also occur if the GRWR is zero.
    Please check your pricing setting.
    Hope this will help to solve the problem.
    I f you are satisfied with the answer, please don't forget to give Reward Points.
    regards
    Claudia

  • Issue with services being published in SR

    Hi Experts,
    We have an issue with services being published in SR
    1.       Service is created and published from ECC to Service registry
    2.       End points are created in Soa manager
    But the service state is shown as u2018Modelledu2019 instead of u2018Configured u2019 in SR
    Thanks,
    Sowmya.

    Hi Sowmya,
    If you want it to appear in the SR as 'Configured', change your procedure to as follows:
    - Create Service in ECC
    - Configure endpoints in SOAMANAGER
    - Then Publish Endpoint binding URL (as it appears in SOAMANAGER) in SR. You can do this Publishing in SOAMANAGER as well. The idea to configure the endpoint before publishing to get the 'Configured' state.
    Some additional reading:
    [http://help.sap.com/saphelp_nw73/helpdata/en/47/d38f14b8fc3c83e10000000a42189c/content.htm]
    Regards, Trevor
    Edited by: Trevor Naidoo on Jun 24, 2011 12:48 PM

  • Has anyone received an update on apple tv issue with HD movies and what they are doing about it

    Has anyone received an update on apple tv issue with HD movies and what they are doing about it

    Whatever the rep told you, it is complete nonsense. There is clearly a problem at your end, the Apple TV 3 is capable of more than the Apple TV 2, and you clearly have the Apple TV 2 working perfectly. Since the Apple TV 2 is able to download from the Internet properly, then my suspicion would be your problem lies on your local network. Interference is a common problem on local networks.
    Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • MAC | stroke style stipple crashes on test movie/ publish in cs3 cs4

    stroke style stippled crashes when testing movie or trying to publish.
    I have done some tests where I've drawn a random animation of just strokes say 10 frames with a solid style. Then I've used the same animation but changed the style to Stippled (also with edits to that stroke style ie very dense) and it CRASHES when i try to play the movie.
    This is VERY frustrating for such a seemingly simple change on such a basic part of flash!!!!!!
    This problem is on cs4 and I have also check Flash cs3 at my uni and it does exactly the same when i tried the test again (I made a new clean animation just to make sure it wasnt the files falt)so its not a problem with my computor but the software!
    found out this search result with the same problem http://www.actionscript.org/forums/archive/index.php3/t-41241.html so im not the only one...
    is it just on the mac versions?
    This is very anoying as i have a project in on friday and thought this style went with what i was working with

    Like I said, it is hard to be certain.
    As far as I am aware, issues with Snow Leopard are specific to font anomalies in 10.6.7, and the fact that you cannot use the OS's printing system to produce PDFs via File > Print from Adobe applications. Do you have a link or citation for the issues you read online?
    So, reasons to suspect Adobe: running the Adobe installer triggered the problem; Adobe programs crash and they crash in Adobe code;
    Reasons to suspect Apple: it's not a single program crashing; the crashes don't seem to make sense; crashes happen for both CS4 and CS5; crashes affected non-Adobe programs (that is what you meant by "all my programs," right?).
    So, my intuition is you should try an OS reinstall.
    Though even if the root problem is the OS, Adobe probably has some blame here -- Adobe's programs should not crash. So you can certainly take it up with Adobe and hold firm to the line "your program should not crash; why is it crashing" and ultimately they should be able to tell you why (based on the crash report, and perhaps other things). But the answer may turn out to be, "because this Apple subsystem is broken. Fix it and our programs will stop crashing."
    Have you looked at the logs in Console.app? They might shed some additional light.
    Also, since you have recently reinstalled the OS, you are probably in a good position to reinstall the OS. Most people are reluctant to do so because they have a lot of data and applications, and it's a huge pain to preserve them. It sounds like you're not in that position, so doing that reinstall is relatively easy. I would therefore do it just for the peace of mind.
    You can contact Adobe Support at http://www.adobe.com/go/supportportal.

  • Issue with windows movie maker

    Hi Team,
    I am a windows 7 enterprise user working with Dell. My OS is an OEM/corporate image and I am unable to install movie maker and get an error code 0x80070643. I have tried multiple times to install and been unsuccessful. Please help me as this important tool
    for my presentations @ work. My IT team confirmed that this is not an issue with the system itself and it is an issue with either the app or the config. 

    Any updates on this?
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Mono sound when test movie/publishing

    Hi,
    I have a sound file which streams on my root time line.
    This sound plays fine in the library but when I test movie/or
    publish the sound plays in one speaker only.
    I have tried publishing in different settings it doesn't seem
    to make any difference.
    Never had this problem before only in Flash 8 Professional.
    Anyone have any ideas why this is happening.
    Thanks

    Sambora wrote:
    > Hi,
    >
    > I have a sound file which streams on my root time line.
    > This sound plays fine in the library but when I test
    movie/or publish the
    > sound plays in one speaker only.
    > I have tried publishing in different settings it doesn't
    seem to make any
    > difference.
    > Never had this problem before only in Flash 8
    Professional.
    > Anyone have any ideas why this is happening.
    try wav instead of mp3 ?
    Regards
    Urami
    Happy New Year guys - all the best there is in the 2006 :)
    <urami>
    http://www.Flashfugitive.com
    </urami>
    <web junk free>
    http://www.firefox.com
    </web junk free>

  • Captivate 8 browser issue with HTML 5 published course

    Hi, I'm troubleshoot a new issue. I have published a responsive course in HTML 5 and posted it to our LMS. The course played fine last week in Chrome but now seems to have a few issues. I wanted to know if anyone had any ideas if it's a browser compatibility issue or possible more to-do with the course publish settings. The course doesn't automatically play anymore. I have to click play on the playbar to start the course, the videos are slower, and the click boxes are not clickable.
    Any ideas?

    You may want to check out Jim's solution here.
    http://captivatedev.com/2014/07/20/html5-captivate-projects-freezing-google-crome-v-36/
    Sreekanth

  • URGENT: Issue with hierarchy level keys and report drill down

    Hi,
    BASIC STRUCTURE:
    I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw dimension has aggregated dimension tables like TIME_DIM_WEEK, TIME_DIM_MONTH, TIME_DIM_QUARTER and TIME_DIm_YEAR.
    GOAL:
    All 3 facts have the same measures M_1 and M_2 in them but may not have data for the same dimension values selected.
    For example
    For month JAN 2000 FACT_A.M1=100$ and no data exists for JAN 2000 in FACT_B and FACT_C. Then in the report
    for JAN2000 it should show FACT_A.M1= $100, FACT_B.M1 = 0 and FACT_C.M1 =0. In this case I should be able to drill down to the lowest level.
    ISSUE:
    The time dimension TIME_DIM has the following levels - Total -> Year -> Quarter -> Month -> Week -> Day
    However I am having an issue with drill down in the reports whenever I pull metrics from more than 1 fact at a time. I have defined the level keys but not sure if I need to do anything in addition since I am using aggregates.
    I have to fix this issue quickly. Please help me.

    Alastair,
    All the fact tables have aggregated facts as sources.
    I have checked the levels set for each of the sources to the time dimesnion table in BMM and they look okay. So the Time dim table in BMM has 4 source tables
    Time_Day (level set to day, table key is "day"),
    Time_month (level set to month, table key is "Fiscal_Month_Code"),
    Time_Quarter(level set to quarter, table key is "Fiscal_Quarter_Code") and
    Time_Year(level set to year, table key is :Fiscal_Year_Code").
    Note: No time week aggregate added as logical source.
    Again the time dim hierarchy based off of this table has levels: Total -> Year ->quarter -> Month -> week -> day
    The levels keys set for each level are
    Year -> Primary key is Year_Name (YYYY)(Checked as chronological key) and another key is Year_Num (YYYY)(Checked as chronological key)
    Quarter->Primary Key is Quarter_Name (YYYY Qn), another key is Quarter_Number (Format n where n can assum values 1,2,3,4). Both keys are set as chronological keys
    Month -> Primary key is Month_Name (MON YYYY), another key is Month_Num (Format n where n can assume values from 1 to 12) Both keys are set as chronological keys
    Week -> Primary Key is week name (YYYY Wk nn, where nn can have values from 1 to 53), another key is week num (nn, where nn can have values from 1 to 53)
    Day -> primary key set to day (date format)
    Issue1: When I try to drill to lower levels it throws out an error saying report cannot find any data because filters may be too restrictive even though I see data at higher level
    For ex: If I drill down to Year: 2010 and Qtr: 2010 Q2 and M1:$100 when I click on Qtr to drll to month level it throws me the error
    Issue2: when I add year and qtr colums to the report I see data as below which is incorrect
    Year_Name Qtr_Name data:FACTA_M1 Data: FactB_M1
    2009 2009 Q1 $10 $5
    2009 2009 Q2 $20 $80
    2009 2009 Q3 $20
    2009 2009 Q4 $30
    2010 2010 Q1 $100
    2010 Q2 $101
    2010 Q3 $102 $230
    2010 Q4 $103
    2011 Q1 $10
    In the above example year_name is not showing up for 2010 Q2 and after. However if I change the primary key for level 'Quarter' by having key consist of year name and quarter name instead of just quarter name the issue doesnt occur and drill down works great. The only issue is when I drill from qtr it first shows year name and quarter name instead of showing the next level which would be month name.
    Sorry about the long message but I thought you might notice something in how I have set up the keys.
    Thanks

  • Urgent : Issue with deleting Line Item in ME22N

    Hi all,
    I have an issue with deleting line item in ME22N for some Purchase Orders.
    When I try to delete the line item, a warning message comes up saying that " Quantity invoiced or delivered is less than the quantity ordered". And I am unable to proceed further and save the PO. Could anyone let me know as why this is happening?
    Thanks in advance.
    Regards,
    Adapala.

    Hi
    there is no need of group key.
    if any of these 3 are done, payment will be done in total.
    1.In setup all company codes for payment transactions , DESELECT seperate payment per business area check box
    2.In setup paying company codes for payment transactions , DESELECT seperate payment for each reference check box.
    3.In the Vendor Master got to payment transactions tab and below the payment method , there will be individual payment checkbox. DESELECT that check box.
    try again with first two with DESELECT options , i will check out with DME.
    Cheers

  • URGENT: issues with jump to targets

    Hey Guys,
    We have recently updated our BW system from 3.1c to 7.0. And now I am having problems with some of my queries. The major problem is for some of the queries I have jumps to other reports and when I try to execute these jumps I get an error saying "Variable I_CALDAY is incorrectly defined ". I have this issue with few queries all in one infoprovider.
    Guys, Any help in regard will be highly appreciated.
    Thanks and Regards,
    Meher

    Problem solved:
    We had to check the box which says "ready for input". This solved the issue as of now.

  • VERY URGENT: Issue with Reconciliation against SAP Enterprise Portal

    Hi,
    We are using IDM7.0 and we have SAP Enterprise Portal as a resource. The users in portal are from Active Directory.
    When I am doing full reconciliation against portal, it is processing only certain accounts. The reconcilaition policy is to link accounts. It is not linking teh accounts. Moreover, these accounts are not found in UNMATCHED accounts also. I don't have any account exclusion rules or something.
    I wrote a small code snippet, which does just a single account reconciliation of a particular user id. In this case the portal account is being reconciled and linked properly.
    Any ideas what the issue might be?
    And I have another question too.. in the schema attributes of the out-of-box SAP Portal resource adapter, I don't see any ammping entry for "accountId". Usually for other resource adapters there would be entry for accountId (e.g in AD, mapping is: accountId <---> sAMAccountName). In case of portal, do we need to explicitly set this mapping? If so what would be the right hand side name in the schema? Does the right hand side name changes from one deployment to the other? If so how to determine what attribute maps to accountId in our portal? Might this lack of accountId is causing the issue with the reconciliation?
    Any leads would be highly appreciated.
    Thanks,
    kIDMan.

    Thanks for the reply. I have already set up correlation rule, account linking options for different situations like FOUND, UNASSIGNED, UNMATACHED etc. If my linking configurtaion is not correct then the fetched accounts should be atleast in the account index with situation as UNMATCHED. But that is not the case.
    I am not sure if I made my problem difinition clear earlier. The problem I mentioned is not with "linking" of the accounts. The problem is IDM is detecting only some accounts. Among those set of accounts which IDM was able to fetch from portal during reconcilaition, it was able to successfully link the matching accounts to identities in IDM.
    My question is, why IDM is fetching only certain accounts and not all accounts from portal resource.
    As I mentioned earlier, when I run my code snippet to reconcile a single account, it reconciles successfully and links to user identity in IDM (if a matching idenity exists based on my correlation rule). But why the reconcilaition at the resource level is not able to fetch and reconcile teh same account.
    Regarding the accountId attribute in the attribute schema, neither the SUN documentation nor the resource adapter configuration tells about the name of the attribute on the portal side that it should match to.
    Thanks,
    kIDMan.

  • Urgent.  Issue with converted .mov files to avi not working in Premiere.

    I am trying to import video files that I have converted from .mov to .avi through OjoSoft Total Video Converter and anytime I try to put a file into the work area, the video goes to Video 1, and Audio goes to Audio 4.  When I try to play it I get no audio, and the video jumps from frame 1 to frame 2.
    Does anyone know a good converter or know the best way to convert and what filetypes to do so?  They work converting them as MP4 video files, but I like avi's better.
    I have tried converting the .mov to mpeg4 and H.264 (Both with audio as MP3).  They will play in Windows Media Player after convert but not in premiere...
    I am running Premiere CS4 on Windows7 with no direct codec packs installed.  I opened a video/audio file that I worked on before with no issues...video/audio run flawlessly in Premiere.
    Please help!

    What are the codecs in the original MOV files and what are the codecs after conversion? Use GSpot to identify them.

  • Urgent issue with viewing purchased movies

    I am deploying and need assistance downloading and viewing movies I have recently purchased. I have called apple help desk several times without success. My videos appear on iTunes list but they do not appear n my iPad under videos. My video screen n the iPad appears blank.

    Hi,
    Don't spend your time to find the reason.
    BI platform content is not supported directly in Safari on iPad or Chrome on Android, only through the Mobile BI apps on these platforms.
    Please see PAM chapter "SAP BusinessObjects BI Platform 4.1 Mobile Clients supported with this release"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&overridelayout=true&59407987714033
    Best regards,
    Roman

  • Cross Domain Connection Issues with Test Controller

    I am having trouble resolving a problem I have connecting a build agent with the test controller in a cross domain environment.  I have purged out the actual machine names, domain names, and IP addresses just in case that is a security concern. 
    Situation is this:
    All machines are running Visual Studio 2013
    Test controller/agents are on Windows Server 2012 R2
    Test controller is installed as stand-alone in order to be able to do load testing, as well as API and CodedUI.
    Build definition in TFS kicks off the automation using testsettings file to point to build controller
    Application under test uses resources in the ABC.XYZ domain.  Test agents need to be in ABC.XYZ in order to test application E2E.
    TFS is in Main.corp.company.com domain.
    Test controller is a dual-homed box in corp.company.com and ABC.XYZ domains.  It are accessible from Main using the corp.company.com NIC.
    All our dual homed boxes are set up this way.  Dual homed with Main and ABC directly is considered a security violation.
    From the dual homed box, logged in with my ABC credentials, I can access TFS in Main using my Main credentials.
    Manually, I can successfully kick off a test run from a command line from a VM in ABC.
    Build controller and build agents are in Main.corp.company.com.
    Build controller can successfully connect to build agent, and build agent successfully builds the automation.
    Build agent fails to connect to build controller:
    Failed to queue test run 'buildagent@MachineOne 2014-08-12 12:35:34_Any CPU_Debug': No such host is known
    I can ping the build controller from the test agent, and I can successfully query port 6901:
    Querying target system called:
    testcontroller.corp.company.com
    Attempting to resolve name to IP address...
    Name resolved to 10.10.10.111
    TCP port 6901 (unknown service): LISTENING
    Firewall is turned off on the test controller.  Even if it wasn’t, the relevant rules allowing port 6901 and File and Printer Sharing are created.
    Local Security Policy | Security Options | Network access: Sharing & security model = classic
    NETBIOS names of the test agents and build agent are set in the test controller’s hosts file (they were pingable without this anyway)
    NETBIOS name of the test controller is set in the test agent’s hosts file (it was pingable without this anyway)
    Tried both simple NETBIOS name and FSDN for test controller in testsettings file
    Considering installing a build agent on the same machine as the test controller, but suspect that would just move my communication problem to build controller : build agent
    Considering moving test controller to Main and making the four test agents dual-homed, but there is a concern to limit the number of dual-homed boxes, and also suspect that would again just move the communication problem.
    I can use netstat to verify that the service is listening to port 6901 on both NICs:
    TCP    0.0.0.0:6901           0.0.0.0:0              LISTENING       6536
    TCP    [::]:6901              [::]:0                 LISTENING      
    6536
    (PID 6536 is the QTController.exe)
    However the VSTTController.log only mentions listening to the ABC NIC.  Since the connection to the ABC test agents works, that makes sense.
    When I open the testsettings file on my laptop in the Main domain and examine the server name, there is a warning that the host cannot be found.  When I open it on a VM in the ABC domain I am able to manage the test controller and view all the test
    agents.  However, if I try to restart the build controller I get an access denied error.  Not sure if that is related in some way.
    I am using a ABC domain service account to run the test agent sevice.  There is a Main domain service account running the build.  Both service accounts are administrators on the test controller and in the TeatTestControllerAdmins and TeatTestControllerUsers
    groups.  The test agent service account is also in the TeamTestAgentService group.
    I tried to create a port proxy to forward requests from the Main facing NIC to the port on the ABC facing NIC:
    netsh interface portproxy add v4tov4 listenport=6901 listenaddress=10.10.10.111 connectport=6901 connectaddress=10.20.20.222
    This almost worked.  I could see with netstat commands that the port was opened and a connection was established with the build agent,  however after a long wait it hit an error that it couldn’t find the ABC NIC:
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 10.20.20.222:6901
    So apparently the ABC IP is getting forwarded back to the test agent, which then of course can’t use it.
    I am running out of ideas to try.  Not sure where the problem is:
    Cross-domain issue between Main.corp.company.com and corp.company.com?  Or,
    Problem with the test controller not being able to listen on more than one NIC?
    I know I am not the first person to try to set up something cross domain.  Most of the troubleshooting suggestions I have been able to bing have been about fixing connections between test controller and test agents, which isn’t the problem here. 
    Is this set up just so far from standard that VS can’t handle it?
    Thanks in advance,
    Gary

    Hi Gary,
    Thank you for posting in the MSDN forum.
    >> Build agent fails to connect to build controller: Failed to queue test run 'buildagent@MachineOne 2014-08-12 12:35:34_Any CPU_Debug': No such host is known
    >> I know I am not the first person to try to set up something cross domain.  Most of the troubleshooting suggestions I have been able to bing have been about fixing connections between test controller and test
    agents, which isn’t the problem here. 
    Just to make this issue clearly, you mean that it is not the Test Controller and Test Agent issue, am I right?
    As you said that it is related to the Build controller and build Agent, am I right?
    If it is related to the Build Controller and Build Agent, I suggest you post this issue to the TFS forum, there you would get dedicated support.
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=vstfs&filter=alltypes&sort=lastpostdesc
    If there's any concern, please feel free to let me know.
    Sincerely,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Maybe you are looking for