Urgent Problem:Upgrade intermedia (Waiting online)

Hi ,friends
I have an urgent problem needed to be confirmed right now becasue it influence on our project
decision.
We planed to uograde interMedia from 8.1.6 version to 9i r2 version.And precondition is that current oracle database(8.1.6.0.0 ) can't be upgraded to 9i becasue our client don't want to do it.Hence,do you consider it's possible?
And how much cost if possible?
Furthermore,can you tell me or give me some evaluation report that I can earn any benifit on Performance and precise(Chinse fulltext search) by upgrading?
Thanks in Advanced!

Is this interMedia text?
If so, please post your question in the Oracle Text forum, since interMedia text is now Oracle Text.
This forum is reserved for multimedia issues.
THe text experts monitor the Oracle Text forum.

Similar Messages

[Urgent] Problem with Itunes 9.2 on Vista 64-bit

Hello,
I have an urgent problem that I hope to get some response and insight from anybody, desperately needing help. As some might know, the new OS for iphone and ipod touch is out. iOs 4 and I wanted to upgrade my itunes, but i had to upgrade it to the itunes 9.2 version. As i was upgrading and installing, this error message : "There is a problem with this Windows Installer package A problem required for the install to complete could not be run. Contact your support personnel or package vendor" came up and ruined the installation and as of now, I am unable to open my Itunes and sync stuff in. This is urgent as I have a ton of stuff inside and now i cant use itunes ! please help !
Im on a version of Windows Vista SP 2 64-bit OS, if that's any info tht will help ! Any help is greatly appreciated here (:

any fixes ? ):

Tried to upgrade my phone online using Loyalty Discount - Online sales Rep no help

I tried to upgrade my phone online to take advantage of the online discount and also use a loyalty discount. The price of the phone is correct until it I get to checkout, the loyalty discount is then removed and only the online discount is applied. I IM the online sales rep, but the person was of no help, telling me that all discounts had been applied. After about 15 to 20 minutes of trying to explain that the loyaly discount was being removed at checkout, I just gave up and cancelled the order.
I later tried it again, only to have the same problem and the same result from the online sales rep.
What good is a loyaly discount if you can't use it?
I am not sure if this is by design or if there is a glitch in the site, but the sales rep could not see my loyalty discount on my account and could not explain why this was happening.
Do I need to go to a store to take advantage of the loyalty discount?
Dons568
Thanks

It may depend on the type of store you go to. Corporate stores are different from third-party retailers (who often carry cell products other than Verizon as well). I would say call the specific store you plan to go to and ask before you go.

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

My iMessages don't work since updating. It says the Messages database is being upgraded, please wait while it finishes or Quit Messages and relaunch it later. How do I get them working again?

My iMessages don't work since updating. It says the Messages database is being upgraded, please wait while it finishes or Quit Messages and relaunch it later. How do I get them working again?

Back up all data.
Quit Messages if it’s running. Force quit if necessary. Relaunch it and test after each of the following steps. If the problem isn't resolved, quit again and go on to the next step.
Step 1
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
From the Category list in the lower left corner of the window, select My Certificates. Look carefully at the list of certificates in the right side of the window. If any of them is marked with a red "X" as expired or invalid, delete it. Also delete all items with "iMessage" or "com.apple.idms" in the name, whether valid or not.
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Log out and log back in.
Step 2
Hold down the option key and select
          Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
          Containers/com.apple.corerecents.recentsd
          Caches/com.apple.Messages
          Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
          Containers/com.apple.iChat
          Containers/com.apple.soagent
          IdentityServices
Leave the Library folder open. Log out and log back in.
Step 3
Go back to the Finder and move the following item from the open Library folder to the Desktop:
          Messages
Note: you are not moving the Messages application. You’re moving a folder named “Messages.”
If Messages now works, delete the Messages folder on the Desktop. Otherwise, quit Messages again. Put back the folder you moved, overwriting the newer one that may have been created in its place.
Step 4
In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
          com.apple.iChat
          com.apple.ids
          com.apple.imdsmsrecordstore
          com.apple.imessage
          com.apple.imservice
Move them all to the Desktop. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again. This time Messages should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes Messages to malfunction. Delete those files and recreate whatever settings they contained.
If the issue is still not resolved, quit Messages again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post your results.
If you later decide that you don’t like the results of Steps 3 and 4, you can undo them completely by quitting Messages and restoring the items you deleted in those steps from your backup.

Will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?

will i have problem upgrading from Snow Leopard 10.6.8 to Maverick ?

Impossible to know. But I would make a backup before doing so, just in case. I would also do the following:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you wish to save yourself a lot time should you need to reinstall Mavericks at some point in the future then see the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
   2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
     sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
     /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time. When completed it would be wise to test the installer by checking that it boots the computer and is then ready for installation.

Are their problems upgrading from windows 7 to windows 8 on HP touchsmart 320 pc

Does anyone know if their are problems upgrading windows 7 to windows 8 on my touchsmart 320 PC and if I decide to upgrade can I remove the windows app and go back to windows 7 without problems?
Ms. BYP

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the back or bottom of the computer. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
THIS is HP's position on Windows 8 support and any HP computer not originally shipped with Windows 8;
Not all Windows 8 features may be available on all PCs.
Your particular experience with Windows 8 will be determined by the capabilities of your PC.
HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
and
Important information regarding additional limitations and requirements;
Screen Resolution Requirements
Limitations with DVD playback software
Limitations with Blu-ray playback software
Limitations with TV Tuner software
Secure Boot & other UEFI dependent features
Limitations with touch screen capabilities;
Windows 7 (and Windows Vista) PCs with touch screens will not have full Windows 8 touch capabilities after upgrade.
HP PCs with touch input hardware designed for Windows 7 (or Windows Vista) will provide a comparable experience for only two touch point applications after the upgrade to Windows 8. HP Windows PCs with touch input hardware will not support Windows 8 applications that require more than two simultaneous touch points. Additionally, Windows 8 edge swipes may not be available due to the recessed bezel on HP touch systems shipped with Windows 7 (and Window Vista).
HP TouchSmart Magic Canvas and HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before upgrading. Note that content created using the TouchSmart applications such as Graphitti will not be available after upgrading.
I did a "clean" install of Windows 8 on my HP TouchSmart 320-1120m CTO Desktop Computer and had NO issues at all. If you do an actual "upgrade", please be aware that much of the HP value-added software that came with the computer will have to be uninstalled before doing the upgrade. You may also run into other minor issues with other software already on the computer. The only way to go back to Windows 7, is to use the HP Recovery Discs you should have already created. If you haven't yet created these discs, do so BEFORE upgrading to Windows 8.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Problem upgrading and installing virtualbox-modules

Have some problems upgrading and installing virtualbox-modules
[elgringo@compjotr Desktop]$ sudo pacman -S community/virtualbox-modules
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: lirc: requires kernel26>=2.6.26-1
:: nvidia: requires kernel26>=2.6.26-1
Had to uninstall lirc nvidia and virtualbox-modules before I could upgrade the kernel and now I can't install the virtualbox-modules.
Anyone else who experienced the same problems?

virtualbox-modules depends on the kernel in core. If you want to use the kernel in testing, you'll need to rebuild the virtualbox-modules against it.
Virtualbox-modules will be fixed when kernel 2.6.26 will be moved in core. So you can wait if you prefer.

Satellite A500/026: problems streaming/watch videos online

Hi,
I wasnt sure where to ask for some help, so i figured id start here since i just purchased my Toshiba A500/026
basically im having problem watching/streaming videos online. doesnt matter the source of the video, youtube, megavideo, veoh. the problem is i have to wait for the whole video to load and then it starts playing. i cant watch it as it streams.
it doesnt tell me its loading, it just shows a black screen and then all of a sudden it will show that the bar is full and the video starts, now this is fine on short vids as it doesnt take long, but for movies it usually fails as they take too long to load so the site will usually come up with some error.
Now ive search on the web and i cant find this problem else where, ive checked that i have the latest abode flash installed and the debugging driver. i usually use firefox, but im getting the same problem on IE.
any help would be approeciated.
Thanks in advance.

Hi
This is very strange and I never heared about such an issue.
What security software (Antivirus) have you installed? Maybe its blocking something or the firewall. You should disable it and try it again - Just for some tests. ;)
Do you run factory settings (preinstalled OS) or another Windows? Maybe you should try it with factory settings again

Urgent problem: customizing collaboration room annoucement page

Hi all,
I am creating a project room template by modifying the Standard Project Room template delivered by SAP.
Here is what I want to do:
For the Announcement page that contains the Date Announcements (roomNews) iView and the Milestones iView, I want to make it such that only someone in the projectLead room role can edit them. Regular project members can only view the Date Annoucements and the Milestones but cannot create new news or milestones.
1) I guess the best way is to create copies of the iViews and remove the 'new' link from them. Any hints about how to go about doing this? I realize that the layout sets of the two iViews (called AppMilestoneExplorer and AppAnnouncementExplorer respectively) do not have any command groups in their Resource Renderers. The 'edit' link from the option tray of these iViews will open up to a new page containing either the AppAnnouncementExplorerEdit or the AppMilestoneExplorerEdit iViews (this is by default, from SAP). How can I see the connection between these two sets of iViews (the ones appended with 'Edit' and the ones without)? The Annoucement page only contains the iViews with the AppMilestoneExplorer and AppAnnouncementExplorer layout sets...
2) In order to remove the 'new' link, do I just go into the Link Command Group and remove the command from the command list itself? What are the difference between Resource, Folder, and Link Command groups?
3) I am to create two iViews (one with the corresponding command in the layout intact and one modified), assign each of them to different pages and then furthermore assign the projectLead role to one page and the regular member role to the other. However, how is it possible to make the two pages in 'sync' to one and other. For instance, if the projectLead creates a new annoucement in his own annoucement page, then the regular members should be able to see this annoucement updated on theirs. Does this has something to do with setting up an extension in the template, relating to the two iViews together (ie. by having the two iViews pointing to the same extension)? Anyone can elaborate on this? (I am just making an eduated guess)
Thanks, urgent problems, points will be awarded generously
Charles

Hi sweta,
It is known issue and recently I have the same problem ;). You must add suitable permission for end user to the iView: portal_content/com.sap.pct/Collaboration/iViews/com.sap.netweaver.coll.CMSearch. It is placed here: Portal Content->Content Provided by SAP->Collaboration->iViews->CM Search. For me it seems to be a bug, because template worksets which you are using for your room doesn't contain this iView. I've opened OSS request and they suggested changing permissions. I've also asked for some explanation why wrong search iView is used inside room worksets but I am still waiting for replay.
Best Regards,
Michal M.

Problem upgrading FCP HD Retail (4.5) to FCS Studio 2

Hi,
I have a retail (non-academic) version of the Final Cut Pro HD Production Suite. I recently purchased a Final Cut Studio 2 Upgrade.
When I try to install the upgrade, I get a message saying that this is an upgrade serial number and asking me to enter my original serial number. When I enter my original serial number, I get the message "The serial number you entered is not valid." What could be the problem?
The original is "Final Cut Pro HD Retail" and included separate serial numbers for FCP HD, Motion, QuickTime and DVD Studio Pro. I have used this version for years with no problem and I originally purchased it at full retail from the Apple Store, so I know there is nothing wrong with the serial number.
The upgrade says "Final Cut Studio 2 UPG from FCS". Everything I have seen online says that the FCS2 upgrade will upgrade from any prior version of FCP Production Suite. Is that not correct?
What could be the problem here?
Thanks!
Michael

I think that the problem is that this upgrade will not upgrade my FCP 4.5 Retail... I'm quite annoyed because I did a lot of research online and in these forums and everything I could find said that the Final Cut Studio 2 Upgrade upgraded from all previous versions of Final Cut Pro or Final Cut Studio. Even when I encountered the problem, everything I found online said that the Studio 2 Upgrade upgraded from all previous versions of Final Cut Pro or Final Cut Studio. Finally, I found one obscure page at Apple that listed 3 different Final Cut Studio 2 upgrades and it appears that this one cannot upgrade from FCP 4.5... Why make an upgrade that can't go from version 4.5 to version 6? I'm annoyed at Apple for making it so confusing. I'm going to try getting the intermediate upgrade and hopefully that will work.
Thanks for your input!
Michael

Urgent: Problems in Generic Extraction by Function Module

Hi BW Gurus,
I am new to SDN and also new to generic extraction using function module. My requirement is to extract long text(142 char) from CRM to BW as the text is not stored in database table I used function module read_text with in another ZXXX function module copy of (RSAX_BIW_GET_DATA_SIMPLE). In my extract structure I used GUID(char,32), Langu, long text(142 char) and 2 placeholders. Text can be extracted by passing STXH table fields(Tdname, Tdid, Tdobject, Tdspars) to read_text as parameters and i also need to use CRMD_ORDERADM_H field GUID(32 char) to compare 1st 32 chars of tdname(70 char) with Guid to select Guids and loop thru this Guids and for each Guid i need to append lines of text to e_t_data but as i donot know ABAP i unable to write the code for this. Through my friends help i wrote code when i check in RSA3 it is displaying the text but when i replicate into BW and load into data target in monitor the status is red with records initially but afterwards it will be red status again with 0 from 0 records for initial load again.when i check on job logs the errors i have are:
The background job has created a job log file of 2Gb size and it is currently on a infinite loop writing entries into the SAP System Log that it cannot write to the Job log file due to Error 22 for write/read access to a file this is because of the datasource i have created. Please find my Function module and if anyone would please correct FM and send me that will be really great.I appreciate it in advance.
MY Function Module is:
FUNCTION Z_CRMORDERH_STR_TXT.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE YCRM_TEXT_STR OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
***" EXCEPTIONS     NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Tables: CRMD_ORDERADM_H, STXH.
Auxiliary Selection criteria structure
data: l_s_select type srsc_s_select.
Maximum number of lines for DB table
Statics: s_s_if type srsc_s_if_simple,
counter
         s_counter_datapakid like sy-tabix,
Cursor
         s_cursor type cursor.
data: i_crmtext type standard table of TLINE .
types: begin of xsreph ,
          GUID type CRMD_ORDERADM_H-guid,
        end of xsreph.
   data: i_guid type standard table of xsreph.
data: I_TEXT type STXH-TDNAME.
data: xempl like YCRM_TEXT_STR occurs 0 with header line.
data: t_tab like dd03l-tabname.
Select ranges
ranges: l_r_guid for CRMD_ORDERADM_H-guid.
         l_r_connid for sflight-connid.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
if i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    case i_dsource.
      when 'yCRM_TEXT'. " for S_SREPH1
      when others.
        if 1 = 2. message e009(r3). endif.
this is a typical log call. Please write every error message like this
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                i_dsource   "message variable 1
                  ' '.                 "message variable 2
        raise error_passed_to_mess_handler.
    endcase.
   append lines of i_t_select to s_s_if-t_select.
Fill parameter buffer for data extraction calls
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource = i_dsource.
    s_s_if-maxsize   = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
   append lines of i_t_fields to s_s_if-t_fields.
we will do our selection based on what is in the p table for the
infoobject
else.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    if s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
    LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GUID'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_GUID.
        APPEND L_R_GUID.
      ENDLOOP.
      case i_dsource.
        when 'YCRM_TEXT'. " for S_SREPH1
          t_tab = 'CRMD_ORDERADM_H'.
      endcase.
      select GUID
      from (t_tab)
      into table i_guid where   PROCESS_TYPE = 'ZACI' and ( OBJECT_ID < '0000000042').
     select tdname from stxh into i_text where tdobject = 'TEXT'.
     if sy-subrc ne 0.
       message e009(r3).
this is a typical log call. Please write every error message like this
       log_write 'E'                  "message type
                 'R3'                 "message class
                 '009'                "message number
                 i_dsource   "message variable 1
                 'No master data found'.           "message variable 2
       raise error_passed_to_mess_handler.
     endif.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
     open cursor with hold s_cursor for
     select (s_s_if-t_fields) from CRMD_ORDERADM_H
                              where GUID in L_R_GUID .
                               ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
   fetch next cursor s_cursor
              appending corresponding fields
              of table e_t_data
              package size s_s_if-maxsize.
    IF SY-SUBRC <> 0.
     CLOSE CURSOR S_CURSOR.
     RAISE NO_MORE_DATA.
   ENDIF.
as we are doing this only once can use the select statement.
***data: crmtext like tline occurs 0 with header line.
**data: i_crmtext type standard table of TLINE.
**data: i_guid type standard table of xsreph.
data: l_guid type THEAD-TDNAME.
data: st_guid type xsreph.
data: st_crmtext type TLINE.
data: lan type THEAD-TDSPRAS.
lan = 'E'.
loop at i_guid into st_guid.
l_guid = st_guid-guid.
CALL FUNCTION 'READ_TEXT'
   EXPORTING
   CLIENT                        = SY-MANDT
     ID                            = 'A002'
     LANGUAGE                      = lan
     NAME                          = l_guid
     OBJECT                        = 'CRM_ORDERH'
   ARCHIVE_HANDLE                = 0
   LOCAL_CAT                     = ' '
IMPORTING
   HEADER                        =
   TABLES
     LINES                         = i_crmtext.
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
e_t_data-guid = l_guid.
loop at i_crmtext into st_crmtext.
move lan to e_t_data-langu.
move st_crmtext-tdline to e_t_data-description.
append e_t_data.
endif.
endloop.
clear: st_guid,l_guid.
refresh: i_crmtext.
endloop.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
endif.
ENDFUNCTION.
please Gurus as I donot know ABAP i appreciate if anyone would write a FM based on requirement and send me that will be really great this is my request. I gurantee of award points for good answers.
Regards
Kishore

Hi,
The statement <b>RAISE NO_MORE_DATA</b> should be active (uncommented) in your code. Otherwise, the infinte loop occurs.
See also, the Siggi's blog:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
BTW, was it your thread here:
Re: Urgent: problems in extracting Long Text
Best regards,
Eugene

Problem Upgrading to Apex 3.1 on XE

I am running into a problem upgrading Apex to 3.1 on Oracle XE.
Hardware and Software:
Database: Oracle Database 10g Express Edition Release 10.2.0.1.0
PL/SQL Web Toolkit Version: 10.1.2.0.4
Host O/S: MS Windows XP Professional Version 2002 SP2
Host Hardware: AMD Athlon 64 Processor, 2.2 GHz, 1.87 GB RAM
Background:
This is a lab host. I am working through the full installation process so that I can set up XE and Apex on development and production hosts, the end in mind being to develop a simple application using XE/Apex instead of Access 2003, which is used heavily in this shop.
It seems to me that upgrading to Apex 3.1 would be a good thing to do up front instead of developing in the version which ships with XE (2.1, I believe) and performing the upgrade later.
I installed XE going with full defaults. Nothing at all tricky. I was able to connect to http://localhost:8080/apex without any trouble and log in as system.
I then followed these Apex upgrade instructions, very carefully:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
After I ran into trouble (see below), I reviewed this post and used it to double-check my work:
How to upgrade to Apex 3.1
I have worked through this a number of times, each time ending up with the same error.
The Problem...
After the upgrade, when I navigate to http://localhost:8080/apex, I receive the following error:
wwv_flow.app_not_found_footer_err
wwv_flow.err wwv_flow.app_not_found_err
OK
I reviewed this posting, which suggests that I upgrade my PL/SQL Web Toolkit:
apex 3.0 error wwv_flow.app_not_found_footer_err after new installation
I am perfectly willing to try this, but I am not sure how to obtain the latest correct version of the web toolkit for this particular version of the database. Any tips on where I might find this?
I also note that the posting says there should be 10 SQL files in the apex/builder directory. I only have 5, but I just downloaded this zip file a few days ago and assume this is the correct number of files. If it isn't, where could I find the correct zip?
Any other suggestions about the root cause of this issue would be appreciated.
Thanks!

Well, like Sherlock Holmes said, "when you have elminated the impossible, whatever remains, no matter how improbable, must be the truth." Or, something like that.
Thanks Joel, it was the files. I examined the zip file I originally downloaded and, sure enough, there were 10 files. I extracted it again and, for some reason, this time it only pulled one of the SQL files out, not even five as it did the first time. In addition, it also skipped about half the language folders.
To get it work, I used the windows built-in zip to open the file, navigated to the apex/builder folder, selected all of the SQL files and language folders, then copied and pasted them into c:\apex\builder.
I then restored the database, ran the install again, and everything worked just fine: I can access http://localhost:8080/apex/apex_admin and log in.
I'm not sure what the issue is, a problem with the zip file or (ok, more likely) a problem with the built-in windows zip tool. I used 7-zip (www.7-zip.org) to extract the file on my workstation and all 10 files and 9 language folders came out just fine.
The bottom line is, it works now, thanks again for the help.
-Tom
PS - I did not install the web toolkit upgrade.

Is anyone else having problems with the Canon Online Store?

In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Hi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen

Problems upgrading from OS 8.1 to OS 9.2.2

Thank you for any help you can give me.
I have some additional problems upgrading from OS 8.1 to OS 9.2.2.
1. The keyboard is typing symbols, not normal letters. When I go to Key Caps it shows symbols and not normal letters. When I was running OS 8.1 the keyboard typed fine.
2. I also am have trouble with windows closing as I open new windows. Everytime I click to open a new folder the old folder closes.
3. Copying files. When I drag a file it makes a new copy on the desktop.
How did I goof up going from OS 8.1 directly to OS 9.2.2?
All these problems were fine while running under OS 8.1.
I believe this computer came with OS.8.6 installed on it but I got it with OS 8.1.
Any help you can pass on to me would be greatly appreciated.
I am typing this on my Dell PC.
Thanks a million,
Jim
iMac G3 333 Mac OS 9.2.x

Easy, I just insert my OS 8.1 System Software into the tray loading CD and choose it as the start up disk in the control panel. I restart the computer and it is running off of OS 8.1 instead on OS 9.2.2. I looked for another keyboard today at a used computer store but they didn't have one for the iMac. I need to find one as all my research indicates that it is somehow connected to the option key. But then again everything works fine under OS 8.1. Quite a puzzle to me. Again thanks for the page tip on Firmware. Jim - PS, I did pick up a zip drive that connects to USB ports.
iMac G3 333 Mac OS 9.2.x

Urgent Problem:Upgrade intermedia (Waiting online)

Similar Messages

Maybe you are looking for