Urgent!! Process not invked after using javascript validation

hi,
I have created a javascript form validation and finally (if its passes the validation) I am setting the :REQUEST as doSubmit('GO');
I am calling a conditional process with condition as request = expression1
with expression 1 as GO.
The javascript is as follows
function message_name_not_null(){
if(document.getElementById('P14_MESSAGE_NAME').value.length==0)
alert("Message Name is Mandatory!!");
return;
else if(document.getElementById('P14_MESSAGE_TEXT').value.length==0)
alert("Message Text is Mandatory!!");
return;
else
doSubmit('GO');
My problem is my process is not getting called in button click(I have called the javascript from this button as javascript:message_name_not_null(); in Optional URL Redirect section)
I have specified the :REQUEST value in the branches also.
Any sort of help please..
Thanks in Advance
Kaushik

Hi Kaushik,
this thread should help you:
Validation with javascript
greetings,
Jochen

Similar Messages

  • Overhead calculation not happening after using Overhead key and orgin group

    overhead calculation not happening after using Overhead key and orgin group.
    There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
    We want to apply/add Overhead to SFG/FG materials.
    We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
    But our problem is with material standard cost estimate process.
    We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
    In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
    But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
    We have checked all things as mentined below.
    Firstly that the correct costing sheet is assigned to the valuation
    variant.
    That the costing sheet is entered for the appropriate material type:
    Finished and semi finished or material components.
    All of the above can be checked and verified via transaction OKKN.
    In addition make sure that the base value maintained is present in the
    costing, for example the base may include an Origin group, is that
    origin group part of the materials being costed?
    Similarly if the base is found and values exist how is the overhead
    rate of the costing sheet set up, is it valid etc.
    And finally do a similar check for the credit.
    we doubt this as a programm error...
    So, request all experts to have ur feedback..

    Dear,
    Check your origin group & material unit of mesaurement is same.
    some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
    You can see unit of measure for material in Additional data - unit of measure.
    Check BOM component material unit also.
    Check same  unit of measure is maintain in KZS2
    I hope above will useful.
    GOPAN

  • Overhead calculation not happening after using orgin group.

    overhead calculation not happening after using orgin group.
    There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
    We want to apply/add Overhead to SFG/FG materials.
    We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
    But our problem is with material standard cost estimate process.
    We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
    In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
    But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
    We have checked all things as mentined below.
    Firstly that the correct costing sheet is assigned to the valuation
    variant.
    That the costing sheet is entered for the appropriate material type:
    Finished and semi finished or material components.
    All of the above can be checked and verified via transaction OKKN.
    In addition make sure that the base value maintained is present in the
    costing, for example the base may include an Origin group, is that
    origin group part of the materials being costed?
    Similarly if the base is found and values exist how is the overhead
    rate of the costing sheet set up, is it valid etc.
    And finally do a similar check for the credit.
    we doubt this as a programm error...
    So, request all experts to have ur feedback..

    Dear,
    Check your origin group & material unit of mesaurement is same.
    some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
    You can see unit of measure for material in Additional data - unit of measure.
    Check BOM component material unit also.
    Check same  unit of measure is maintain in KZS2
    I hope above will useful.
    GOPAN

  • Battery is not charged after using all of my battery. what's wrong? is it about charge machine or my computer?

    battery is not charged after using all of my battery. what's wrong? is it about charge machine or my computer?

    battery is not charged after using all of my battery.
    Of course it isn't — you've just drained it. Plug your AC adapter in and charge it up again.

  • Thumbnails do not display after using rebuild tool

    I am using OSX 10.7.5, and iPhoto 8.1.2.
    recently I made a back up copy of my files.
    I then reinstalled my operating system.
    I then copied my iphoto library back onto my computer.
    imported my iPhoto library into iPhoto
    Pictures are in iPhoto.
    Thumbnails do not display.
    I have used the rebuild tools provided by iPhoto.
    Still no thumbnails displaying.
    any other ideas?

    It relates to your suggestion in that, the reason I posted was to solve a thumbnail issue.
    "re: Thumbnails do not display after using rebuild tool"
    Terence suggested reloading my back up library.
    I asked Terence where I should import to.
    I was thinking that my thumbnail issue was related to the way I imported my back up.
    You clarified where to import the library...
    I tried it and I still have no thumbnails
    I have already tried repairing permissions and rebuilding thumbnails using the i photo repair tool.
    can you help me?

  • SHCess field not appearing after using utilization tab in excise invoice

    Dear All,
    SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
    Please give the inputs.
    Regards,
    deepti

    issue resolved

  • Mail not working after using migration assistant - what am I missing?

    Mail not working after using migration assistant - what am I missing?

    The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The  MAILBOXES category can't be hidden.
    In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

  • Page item value set in app process not maintained after page submit

    Hi -- I have a sequence of events that goes like this:
    1) Page 0 region REG_1 is rendered before footer
    - Region REG_1 uses javascript / AJAX to call App process PROC_1
    - PROC_1 sets Page1 item PAGE1_MESSAGE to X
    - After PROC_1 executes successfully, REG_1 does doSubmit()
    2) Page 0 region REG_2 is rendered before footer; this happens
    after the page submit done by REG_1. (Conditions ensure that
    REG_1 is not rendered again)
    - Region REG_2 displays PAGE1_MESSAGE (=X) in an alert.
    - Region REG_2 uses javascript / AJAX to call App process PROC_2
    - PROC_2 sets Page1 item PAGE1_MESSAGE to Y
    - PROC_2 sets Application item DEBUG to PAGE1_MESSAGE (this is for debugging)
    - PROC_2 sets Application item APP_MESSAGE to Y (this is also for debugging)
    - After PROC_2 executes successfully, REG_2 does doSubmit()
    3) After REG_2 submits the page, here's what I have:
    - Application item APP_MESSAGE = Y. Good. This is what it was set to in PROC_2.
    - Page 1 item PAGE1_MESSAGE = X. Bad. This is what it was set to in PROC_1.
    - Application item DEBUG = Y. Good. This at least shows that PAGE1_MESSAGE was
    set to Y within PROC_2... but for some reason that value is not being preserved
    after the app process is done executing.
    - There are several other application items set in PROC_2, and they're all correct.
    Any ideas as to why this is happening? It seems like this should be
    pretty straightforward: set the value, submit the page, the value should be what
    I set it to.
    Thanks,
    Carol

    Hi -- Thanks for the suggestions. First and 3rd (default value, or being overwritten by process or computation) aren't happening. The source for PAGE1_MESSAGE having is Always, Using app item PAGE1_MESSAGE... but I don't see what else could work here. Not sure if that's the problem.
    I've put an example on apex.oracle.com. Workspace is dew_mir_tor. Username is [email protected]. Password is Mir97Dew77!Tor. Application is 22679, RefreshAllTest.
    To reiterate the description in my original posting, but using the real application item/region/process names:
    0) Press Button REFRESH_ALL on Page 1. This branches back to Page 1.
    1) Page 0 region Refresh_All is rendered before footer
    - Region sends up an alert to show you it's working
    - Region Refresh_All uses javascript / AJAX to call App process REFRESH_CZAR (You'll see a "wait" window flash up briefly while the app process is running)
    - REFRESH_CZAR sets Page1 item P1_MESSAGE_1 to X (The text here indicates where
    the value is being set and when it should be displayed)
    - After REFRESH_CZAR executes successfully, region Refresh_All does doSubmit()
    2) Page 0 region Refresh_Non_Czar is rendered before footer; this happens
    after the page submit done by Refresh_Czar. (Conditions ensure that
    Refresh_Czar is not rendered again)
    - Region sends up an alert to show you it's working
    - Region Refresh_Non_Czar displays P1_MESSAGE_1 in an alert.
    - Region Refresh_Non_Czar uses javascript / AJAX to call App process REFRESH_NON_CZAR (You'll see a "wait" window flash up briefly while the app process is running)
    - REFRESH_NON_CZAR sets Page1 item P1_MESSAGE_1 to Y (The text here indicates where
    the value is being set and when it should be displayed
    - REFRESH_NON_CZAR sets Application item TEST_VALUE2 to P1_MESSAGE_1 (this just shows that P1_MESSAGE_1 was indeed set to Y in this process...)
    - After process REFRESH_NON_CZAR executes successfully, region Refresh_Non_Czar does doSubmit()
    3) After Refresh_Non_Czar submits the page, Page 0 region Display_Messages is rendered.
    It sends up an alert so you can see it's working, and then it displays the value in P1_MESSAGE_1.
    The value is still the one that was set in REFRESH_CZAR, not the one set in REFRESH_NON_CZAR.
    Note that Display_Messages sets P1_MESSAGE_1 back to null, so you won't see it in session state after it's displayed in the alert. But you can see that TEST_VALUE2 is set to the message from REFRESH_NON_CZAR.
    Hope this helps solve the problem!
    Thanks,
    Carol

  • Aperture 2.0 Activation Key does not work after using older trial version

    I was using the installed trial version of Aperture 1.5+ in my recently purchased MacBook Pro Duo (December 2007). After using the trial version for 30 days I debated whether to take the plunge ...and then within a few days recieved word that v2.0 was out at 199$. That motivated me ...however, here I am nearly one week later without ability to activate a full blown version of 2.0.
    I recieved the activation key, but it doesn't accept it in the dialog to upgrade in the trial version. Hint seems to be that it is not a serial number I am entering but an activation key.
    I did not order a boxed version, so what do I do now? Support is not too helpful as I have searched Apple's website and have no clue as to where to go.
    Last resort ... I want my $199 back!

    did you download the trial for Aperture 2

  • Processes Not Posting After Maintenance

    Hi,
    Periodically, processes will go to Not Posted status after we bounce the servers during our maintenance window. Usually, bouncing the process scheduler and clearing the cache does the trick. However, one in a blue moon, jobs simply will not post. We will spend hours bouncing servers, clearing caches, etc. and nothing works. Then a couple of hours later everything will start to post.
    Any familiar experiences or thoughts on why this occurs?

    The maintenance varies from week to week; it's generally OS-level patching that doesn't require a reboot. I've got an experienced Tech Arch team taking the servers up and down, so I'm confident that the servers are being bounced correctly.
    In the past, when reports have not posted after maintenance we have shut down the process scheduler and cleared cache and reports started posting. More recently, we've bounced the servers for several hours only to have reports start posting on their own afterwards.
    I pulled the stdout log and found the following:
    Java exception thrown: java.net.ConnectException: Connection refused (errno:239)
    HTTP Status Code is: 900 (63,72)
    Error getting report repository location. (63,85)
    SchedulerTransfer Servlet error. (63,74)

  • Hot Corners not working after using Call of Duty 4

    So I have noticed that Hot Corners are not working after i use COD4.
    I know that the game uses different resolution and somehow interupts the hot corner software. Buty why and how I dont know.
    I very often close COD4 by using Cmd+Q (or something like that)... But it doesnt matter if I quit it the "real" way. Hot corners still stops working after I use it.
    Hot corners works again if I reboot my iMac and also if I have used COD4 then go to System Preferences and Hot Corneres and make one change there.. then it magically works again.
    Does anyone have any definate solution for this.
    PS: I have an iMac 3.06 GHz Intel Core 2 Duo. 4GB 1067 MHz RAM and Lion 10.7.3.
    I also have a Macbook Pro with the same problem.... and both computers running Lion OSX and are always updated....
    Peace
    /Bobo

    Does your 8600M GT have 128 or 256MB VRAM? Both versions shipped with that model MBP. The game sysreqs says that, while 128 is minimum, 256 is preferred. We all know what "minimum" means in software advertising.
    Have you downloaded the SL Graphics updater?
    http://support.apple.com/kb/DL1083
    It's supposed to fix certain games but it's worth a shot.
    I'm surprised that the temp doesn't change. Even running the COD2 demo on my Late 2007 2.2G with 2G RAM and the 128MB version of the 8600, temps go up to 160-170F. That was under 10.5. Just upgraded to 10.6 Sunday, so I guess I should check COD2 again, because SL seems to run cooler on my MBP.

  • Swipe for Notification Center and Control Center not working after using Window Zoom

    I'm using iOS 8.0.2 on an iPhone 6 and have noticed that after using the Window Zoom (Accessibility feature 3-finger double-tap), I cannot swipe down for Notification Center nor swipe up for Control Center when unlocked (i.e. in Home screen or within an app screen). However, when the iPhone is locked, the swipe down for Notification Center and swipe up for Control Center is okay. It just doesn't work when unlocked. And the only way to rectify the problem is to reboot the phone.
    Has anyone else experienced this?

    I have figured out the solution to all of our problems!!! We can keep the zoom function ON!!!! Yay!
    Step one. Turn back on the beloved zoom function.
    step two. Tap screen with 3 fingers.
    step three. Select window zoom. (If already selected move on to step Quatro)
    step qautro. Select Resize lens.
    and for the moment you've all be waiting for... Drum roll..
    the grand finale step. IS...
    shrink the window to the smallest size.
    AFter you have done these 5 steps, you can thoroughly enjoy having all three functions at once. If you switch back to Full Screen Zoom (if that be your preference) the notification and control centers will remain functional! Bon apetit!
    i have been successful enlarging the window while keeping the centers functioning by making sure the window is in the shape of a square.
    -ChrisCasti

  • Pen tool not reconnecting after using convert point tool to reajust?

    Hi
    I was wondering if anyone had come across the problem pen tool not reconnecting afer using convert point tool to reajust? sorry if you don't understand what I mean, basically I can't reselect my pen tool to its path one doing another similar type task with another pen tool task.
    thanks,
    helen

    http://forums.adobe.com/people/Larry%20G.%20Schneider
    Larry,
    I Just tried the solution you gave. It did not work. I still have 1 point vectors in a very small image. The image is a simple drawing of a map. I just want to size it to fit a smaller page size.
    Elaine

  • Aperture not responding after using a sharpening brush

    anyone have a problem with aperture not responding after makeing a mod to a pic

    What is your Aperture version?  Aperture 2 and 1 do not work well with MacOS X 10.9.3.

  • Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

    I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
    At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
    Mini DisplayPort–to–VGA adapter implicated
    The following sequence of events causes the problem to occur:
    Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
    Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
    With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
    At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
    I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
    At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
    Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
    I used Apple System Profiler to save a list of identified devices at two points in time:
    Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
    After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
    Many devices are enumerated in the second list that are missing from the first. For example:
    Keyboard Hub@fe110000  <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
    AppleUSBHub  <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
    IOUSBInterface@0  <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
    Keyboard Hub@fe110000  <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
    AppleUSBHub  <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
    IOUSBInterface@0  <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
    Apple Keyboard@fe112000  <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
    and many child devices…
    Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
    Some devices are discovered even when the computer is in sleep mode. This is how it should work.
    The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
    Can anyone else reproduce this problem?

    Hi glraczon.support,
    It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
    Here is an article that may help you with that process:
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/HT5369
    Thanks,
    Matt M.

Maybe you are looking for

  • Possible to migrate installation w/ SLD to new system using 'tar'/'untar'?

    I have a CRM installation with TREX, that I need to move from one unix system to another (same patch level). As SLD is setup, can I 'tar' the entire installation on the old system, 'untar' the bundle on the new system, and bring the SAP setup back in

  • How to config the Leave in advanced?

    Hi all ! Please help me to solve my problem. In my company: (A) : Employee/s with 12 months service is/are entitled to a vacation with full pay. Number of paid workdays vacation is 12 workdays for all staff And (B) : Employee/s can take maximum 5 lea

  • ODI and Hyperion Planning help

    Hi, I have 2 Hyperion Planning 9.3.1 servers setup for Finance and HR applications. I want to copy data from the HR application to the finance one. I have ODI 10.3.5 setup on a separate machine with Hyperion Planning adapter installed. In the topolog

  • Handling of special charactersin a conversion file

    I am using js:%external%.toString().replace("-","_") in a conversion file to replace dashes with underscore. The code only works for one instance of a dash. If there's another dash on same record, it doesnot replace it. Can someone give me a suggesti

  • Re: Satellite C850 won't boot anymore - broken HDD

    Hello Folks, I bought a *Toshiba Satellite C850 - 1F2* with *+Windows 8+*. After installing, upgrading to *+Windows 8.1+* and setting up everything, the whole machine worked pretty fine. BUT since yesterday the laptop won't boot anymore! When I turn