URGENT: Provision users on Electronic devices like Mobile in OIM
Hi all,
How to provisioning users on Electronic devices like Mobile in OIM. Do we have connectors/adapters/forms to Provisioning it?
Regards,
Karthick
You need to implement a disconnected resource for this. No OOTB connector.
Similar Messages
-
Can I connect window device like modem, mobile in oracle forms,if possible then how?
Can I connect window device like modem, mobile in oracle forms,if possible then how?
Hi Tony,
So explain where you would see your notification?I just mention, Leave module, there are many other module. For example In Purchase Purchase Requigition , Production Module Production Complite , Delivery Module Delivery Ready.
For this it will better to show at respective Menu.
In the Window title?Another good Idea !
You could have a timer trigger that runs every 5 minutes and checks a notification table, if there is an unacknowledged notifcation, then you could change the Window title of the formas app to show a (1) at then end of it.Timer has a bad this.. For example, if i make a timer and run every 5 min. then if user works on a form, timer will hide the form and show the timer window.
Isn't it ?
Would that do, or do you need more?Yea.. More..It will be like facebook. If any notified work is done by any person, light will go off.
Thanks for your interest and suggestion...
Ask2Learn
Edited by: Asked to Learn on Jan 23, 2013 12:36 AM -
Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank youHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Does SAP Netweaver Mobile support integration with devices like Intermec?
Hi All,
We have a scenario where the customer is currently using SAP Console based approach for RF transaction related requirement. The device used is Intermec CK31 for barcode scanning and updating the data in the SAP backend. Some example scenarios are Goods Issue & Scrap. Since the SAP Console based approach does not support Offline mode, the customer is interested in evaluating the option of using SAP Netweaver Mobile for the solution.
Related to this requirement, we have the following queries.
1) Does SAP Netweaver Mobile support Intermec CK31 device without a product like Mobile Factory. What are the pros and cons in this approach of using SAP Netweaver Mobile only? If yes, are there any documentation how this can be accomplished?
2) Are there simulators for Intermec scanning devices like Intermec CK31 to be used while application development?
3) Can Mobile Factory be used for implementing this requirement? Can it support offline scenarios without SAP Netweaver Mobile? Does Mobile Factory provide Simulators for the devices such as Intermec CK31 for application development?
An early response would be greatly appreciated as we are in the process of evaluating a right approach for the customeru2019s requirement and the same needs to be provided soon.
Thanks in advance.
SureshHi,
Refer to note 1057759 for the delivered Drivers for Peripherals and devices supported in SAP DOE. This lists all the supported barcode scanners for SAP Netweaver Mobile. Those derivers are certified after testing to work only with that device and OS configuration.
Regards,
Suma -
If I do a creative cloud membership does it give me two computers and other devices like an ipad? Or just one computer one mobile device?
ThanksYou can have functional installations on two machines. The machines have to meet the system requirements for the software.
-
is there anyway to send all my saved msgs to some other device like nokia or sony?
thru bluetooth or infra red..?
thnx
Post relates to: Treo 650 (Cingular)You may be able to forward your messages using standard texting service. I don't beleive there is an option to beam the messsage.
In your inbox, tap on a message to highlight the message. Tap in the upper left corner of the screen where it says msgs. Look for the selection to forward. If it is available, you can forward the message using the sms service.
You would need to send each message one at a time.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/treo/650/att/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc. -
Hello All,
I am having a problem when downloading ITunes on my Dell Inspiron 6400, an error message appears which says Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start systems services. I have uninstalled ITunes and downloaded software to clean the regitry. This did not work, I even went into my local Apple store in Manchester, they downloaded ITunes onto a CD but it still does not work.
I am going on holiday on Wednesday and would like to have my songs on my Iphone before then.
All help would be greatly appreciated.
Thanks
PaulTry the following user tip:
Troubleshooting issues with iTunes for Windows updates -
How to de-provisions user's resource when the user is disable ?
When a user is disable in OIM, I would like OIM to de-provisions all the user's resources.
Is it possible to do it and how to do it ?Hi Deborah,
I have tried the following configuration, but i am unable to de-provision the resource for the user. The Delete User task is not getting called. Here are the steps that i have followed.
1) Created a Disable User task with conditional checked and Task Effect as Disable.
2) Added a adapter to it, and in the response tab added a new response COMPLETE (adapter will be returning COMPLETE) and given the status for the response as Cancelled.
3) In the Undo/Recovery tab, added the Delete User task.
4) In the Task to Object status mapping, given Revoked for Object status for the Cancelled status.
As per the OIM document the Undo tasks are triggered when the current process task status is Cancelled, but still i found that the undo task is not getting triggered. I have made both Disable and Delete User task as conditional. Also i have added the Delete User task under Undo/Recover tab of Create User task. Can you tell me why the Delete User task is not getting called. Here the user is also not getting deleted from OIM.
Also all the tasks in the resource object are showing the status as Cancelled.
I have created a simple Mobile Phone resource object and done all these steps. Can you tell what went wrong. If i directly deleted the user from Admin console the Delete User task is getting called and user is also getting deleted. -
Media Player Bookmark/User Feedback from Device
Media Player Bookmark
I like to listen to audio books. We all realise that the mobile devices experience some severe slow down when multiple applications are running, especially the memory intensive multimedia apps. Anyway, I think that it would be cool if there were some kind of "digital bookmark/restore point". Right now, if i want to save where i've left off, I either have to leave the application running or make a note with the track/time that i've stopped listening. If there were a prompt when you are exitting audio or video playing apps that asked if you would like to create a restore point that you can start back from or reference later, I think that would be great! Just a request from an audio bookworm nerd.
User Feedback from Device
I think that the lack of ability to send immediate feedback or suggestions when they occur to users will ultimately make a huge difference between the BB product and its competition. It took me about an hour before I gave up, about two months ago, when I was experiencing a perceived software issue, of trying to find a way to either directly access a forum from my device or go online with the device to BB forums only to find that they weren't very compatible with mobile device users. Doesn't make much sense to me that you'd have a hard time accessing a companies web site that's in the mobile communication business from their own device. Today, I spent about another hour signing up to every BB feedback panel, survey this, forum that to try and make a suggestion. It's too hard! I am dedicated to using the BB service until there is something more effective... user feedback is what will make the difference.
It seems like there should be a way to install a direct feed app, preloaded on every device with a little 180/240 character box. Not too much to be had to manage, not too little to where people can't get their point across.
I'm sure it's been thought about before, but I'm left wondering why it's not there.?.
Thank you to anyone with ideas or suggestions...especially if it helps me with my books!Regarding long mp3 bookmarks. (my experience with 9780).
I had the requirement that when playing long MP3s (audiobook/podcast) I don't loose my place within the MP3. I am able to update the list of MP3s without loosing my place in the currently playing one. I don't loose my place when connecting the BB to a PC with the USB cable and using USB synch to copy files to the SDCard.
All of these are accomplished by playing MP3s via File Manager/Play Folder feature.
If you use play lists or other methods directly through the BB media player, you will loose your place as soon as you switch off the BB, escape the player, or connect the USB cable.
If instead you use the file browser to go to the folder with the MP3s you wish to play (I have all my podcasts in one folder that I update manually) and select "Play Folder" from the context menu, the media player will open.
If you escape the media player that is opened as per above, the last point in the played MP3 is remembered. This even survives any synchronization I do to the folder via USB or a soft power reset (ALT CAPS DEL). It remembers the spot in multiple MP3s to boot.
This is a great handy feature. I'm glad it works with the 9780/OS6. -
I was getting an update and it would not load so I tried to uninstall and reinstall. Now when it reinstalls it gets to the end and it comes up with the following error message.
Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
This is on my desktop that I have had for a number of years that has had itunes for a number of years. I have an two ipods and an ipad associated with the itunes account. Now I can not get it to go past this message.Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
While downloading the newest iTunes update I received several errors. The latest one being this: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." These are the steps that I have already taken: un install iTunes (several times), reinstall iTunes (several times), move the .dil files to my desktop (although I have no idea what to do with them now)... I am still getting the same error while trying to download 1. the service error and 2. iTunes failing to open because it isn't properly installed. Can some one PLEASE be so kind as to help me with VERY simple step by step directions. I'm usually more computer savvy than the average user, but I'm feeling computer illiterate at the moment. I've been trying to work though this for 2 days now... sigh. Thank you in advance!
I found the answer to my question here: https://discussions.apple.com/thread/5572755?tstart=0
-
I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." The diaglogue box gives me the options to abort, retry, or ignore; when I tried retry and ignore the re-install process stays stalled & the dialogue box comes back & I don't want to abort & start this all over to probably end up with the same issue; what does this mean & what do I do?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Provisioning: Users from OIM to Active Directory
Dear Experts!
I am trying to setup provisionig from OIM to AD. I just want to provision Users from OIM to AD.
I am going through this documentation/tutorial:
http://download.oracle.com/docs/cd/E11223_01/doc.910/e11197/deploy.htm#insertedID0
i also read this:
http://www.oracle.com/technology/obe/fusion_middleware/im1014/oim/ad_provision/prov2ad.htm
But it just won't work. The provisioned resource get's always status rejected in the (To-Do List --> Open Tasks).
Then i tried to test the connection to AD using this documentation:
http://download.oracle.com/docs/cd/E11223_01/doc.910/e11197/testing.htm
And i get this error in the console:
http://img689.imageshack.us/img689/3190/errorq.png
The IT resource: ADITResource looks like this:
Remote Manager Prov Script Path:
Admin FQDN: [email protected]
Use SSL: no
Remote Manager Prov Lookup: AtMap.AD.RemoteScriptlookUp
Target Locale TimeZone: GMT
Port Number: +636+
AtMap ADUser: AtMap.AD
ADGroup LookUp Definition: Lookup.ADReconciliation.GroupLookup
isUserDeleteLeafNode: no
Allow Password Provisioning: no
UPN Domain: domain-test.local
AtMap ADGroup: AtMap.ADGroup
ADAM LockoutThreshold Value: +5+
isADAM: no
Admin Password: *********
Invert Display Name: no
Root Context: dc=domain-test,dc=local
Server Address: testing-server.domain-test.local
Could be the problem that i don't use SSL? I don't set Passwords in AD, i have read that then i don't need SSL...?
I am new to OIM, so your response is greatly appreciated!
Thank you very much in advance!Hello again Raj!
Thank you for your answer. You have always good ideas...
*1) Whats the response that you are getting from AD for this operation. Check this as following:*
Go to Users->UserABC->(Resource Profile from Drop down)->(Click your particular resource instance)->(Select the rejected task precisely "Create User")_
I get this on the Task Name - Create User:
Status:Rejected
Response: Please Select the Organization or Container Name from Organization Name Lookup
Response Description: Please Select the Organization or Container Name from Organization Name Lookup
But i can't get to populate the Organization Name on the user form, because there are no values available.
Under Error Details there is nothing.
*2) If your IT resource parameters are incorrect, you will get a connection error in logs. Your port information is correct, it has to be Port->389 and Use SSL-no*
I have created a new IT resource without SSL. Just to test the connection to AD. It works because I get “Successfully established connection to the AD_Test_without_SSL.”
Bellow is my NEW configuration for the IT Resource.
IT Resource Name:* AD_Test_without_SSL
IT Resource Type:* AD Server
ADAM LockoutThreshold Value:* 5
ADGroup LookUp Definition:* Lookup.ADReconciliation.GroupLookup
Admin FQDN:* [email protected]
Admin Password:* *********
Allow Password Provisioning:* no
AtMap ADGroup:* AtMap.ADGroup
AtMap ADUser:* AtMap.AD
Invert Display Name:* no
isADAM:* no
isUserDeleteLeafNode:* no
Port Number:* 389
Remote Manager Prov Lookup:* AtMap.AD.RemoteScriptlookUp
Remote Manager Prov Script Path:*
Root Context:* dc=domain-test,dc=local
Server Address:* testing-server.domain-test.local
Target Locale TimeZone:* GMT
UPN Domain:* domain-test.local
Use SSL:* no -
I have an iPad (the earliest version) that used to connect to my Linksys wireless router with no difficulty. One night recently I could not get on the internet through my iPad. I checked the Wi-Fi information, which said it was not connected.When I go through the process of choosing a network, on which my home system is clearly listed along with a very strong signal strength, I am told that my iPad is unable to join my own network. All the other electronic devices in our house are connected and functioning fine. Can anyone walk me through the steps to correct this problem?
I need to add that I took my iPad to the Appple store, and the clerk there reset something--I don't know what--and my iPad was able to connect to their network. When I came home, though, I was not able to connect to my home network.If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
Good luck -
Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
"Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
WMS2011 Domain Logon / Network Issues
We have recently installed 3 MS6200 Series HP MultiPoint Servers for a school and we are having a sporadic problem with one or more of the servers losing connectivity with the domain, preventing users from loggin on to the clients (t150 zero clients)
-
%DOT11-7-AUTH_FAILED: %DOT11-6-DISASSOC:
Hello again, Thought this issue was fixed yesterday after finding out my printer was the MAC address flashing up on the log, however it seems that every device is playing up. Thanks James These are my wirless devices, APPLE IPHONE 6809.2780.219a
-
Error - "service ticket can't saved as status is open"
Hello Friends, We are automating the service ticket generation . I have developed a code to generate a service ticket by hard coding the values. When I try to execute the code it is giving me an error that"service ticket could not be saved as the sta
-
I would like to convert rows to columns of a sql. select col1, col2, col3, col4 ABC 1 2 3 DEF 4 5 6 GHI 7 8 9 I want to convert to ABC DEF GHI 1 4 7 2 5 8 3 6 9 Thanks for your response.
-
Extra sequence presets require certified graphics card?
After installing Creative Suite 5.5 Production Premium I don't have the extra (third party) sequence presets that the full version has over the trial version. Last time I installed this on the same machine with the same OS I got those presets. Now I