Urgent regarding FM for variant

Hi All,
I am having a field on the selection screen in which i have all the save layouts as values.whereever i selected the layout ,i have to know the variant status (like FM reuse_alv_grid_layout_info_get).based on the variant selected i have to pass the internal table.I want to know is there any FM to reslove this.
can any help in this regard.
Thanks&Regards
Padma.

hai,
this is my code. In this i got print control pop up screen but it not generating spool......
END-OF-SELECTION.
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'SPOOL'.
  NEW-PAGE PRINT ON DESTINATION OUTD
                           COPIES COPIES
                      IMMEDIATELY 'X'
                       LINE-COUNT SY-LINCT
                        LINE-SIZE SY-LINSZ .
ENDCASE.
regards,
jai.m

Similar Messages

  • Urgent:Regarding Reports for read only field.

    Hi All,
    Does it happen that the fields which are read only or system defined does not get reflected in report subject area or so ? I have created one report where one field 'Triage' which is Look up window and Picklist read only field is not showing up values in report subject area.Is this due to the field which is a Picklist read only field.
    Quick response will be highly appreciated!!
    Thanks and Regards,
    Manish.

    user12880720 wrote:
    Hi All,
    Does it happen that the fields which are read only or system defined does not get reflected in report subject area or so ? I have created one report where one field 'Triage' which is Look up window and Picklist read only field is not showing up values in report subject area.Is this due to the field which is a Picklist read only field.
    Quick response will be highly appreciated!!
    Thanks and Regards,
    Manish.Hi Manish,
    You do not specific if this is a multiselect picklist you are refering to or what type of reporting you are trying real-time or analytics?
    Anyway please see the below from the help file:
    Multiselect Picklists
    Multiselect picklist (MSPs) values are not supported in real-time reporting subject areas. They are supported in the historical subject areas for the following subject areas:
    Account
    Activity
    Contact
    Dealer
    Lead
    Opportunity
    Service Request

  • URGENT: REGARDING TABLE FOR SALES ORDER STOCK

    Hi,
    I making a report in which i have to display the material's minimum ,maximum and reorder point levels and its stock level too.
    but 1 problem i am facing is that if the stock is present in the sales order theni have to use the MSKA table but it contains different fields such as :-
    1.) Unrestricted stock
    2.) Block Stock
    3.) Quality stock
    I want to know that table which stoers the sum of all the values given above.
    plzz help me out how to solve this problem.it is really urgent to me as i have to complete the report right now.

    Hello,
    I think you have to sum up all the values (You can request the requirement from functionals) also you can always cross check with transaction MB52.

  • Stock Report for Variant configuration

    Hi Experts,
    Request your help to get the following information.
    We have a material which are packed in to multiple packing modes. Inorder to ease the selection of packing mode in sales order, we are thinking of introducing variant configuration. I.e all the packed materials will be created as variants in SAP and the sales order will be created for the configurable material. When the proper characteristic is selected the material will be automatically replaced by the variant.
    But the requirement is to see the stocks of all the varaints along with the configurable materials as the header. For eg. Material A is having variants A1, A2 & A3. The sales quantites are 25, 30 and 35 respectively.
    In any of the standard report, can I see the sales of these along with the total sales of config mtl A as 90
    Please guide.
    Thanks & Regards
    Prathib

    Hi Prathib,
    On my last project, we define material code with the same code at the beginning like you do A1 A2 A3 (for variants) and AC for example for configurable material. Then for stock report you can use MB52, in material field just write A* it will show you stock from material start with code A. But make sure you define material type and material group for selection wisely. It works for me. Now depends on how well you define your structure.
    Regards,
    Arman

  • Creating a transaction code for variant type in se93

    hai all,
    i created transaction's for dialogue type and report type,now i am trying to create transaction for variant type. in that what we have to provide in transaction text box where the f4 functionality is provided for that text box.
    could any one plz help me out.
    Thanks in Advance.

    Hi,
    U need to create transaction variant in SHD0 transaction before creation transaction by variant.
    Go thru the following link carefully.
    Certainly it will be helpful to you.
    http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
    Regards
    Vadi

  • Urgent: Regarding Join Syntax in Oracle 9i and 10g

    Dear Members
    Please help me by providing me the synatx of following Join statements for Oracle 9i and 10g:
    1.Inner Join
    2.Left Outer Join
    3.Right Outer Join
    4.Self Join
    5.Cross Join
    6.Full Outer Join
    N.B. I NEED THIS HELP URGENTLY
    Regards
    Praveen Kumar Pandey

    Inner join
    SELECT *
      FROM a,
           b
    WHERE a.<<column>> = b.<<column>>Left Outer Join
    SELECT *
      FROM a LEFT OUTER JOIN b
             ON a.<<column>> = b.<<column>>Right Outer Join
    SELECT *
      FROM a RIGHT OUTER JOIN b
             ON a.<<column>> = b.<<column>>Full Outer Join
    SELECT *
      FROM a FULL OUTER JOIN b
             ON a.<<column>> = b.<<column>>Self Join
    SELECT *
      FROM a a1,
           a a2
    WHERE a1.<<column>> = a2.<<column>>Cartesian Join
    SELECT *
      FROM a,
           bJustin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Urgent regarding credit limit

    Hi Gurus
    I have a issue regarding credit limit:
    for a customer "ABC" i have maintained a credit limit for 1000/- in FD32 now when we create a sales order of more than 1000/- for the same customer a popup MSg is comming saying amount has exeeded ...so far so good
    my issue is that the requirements should not pass to MD04 (Stock/Requirement List)
    some of the SAP gurus giving the answer  check out OVB8 and see the requirement 101, i want to know the functionality of requirement "101" and how to go about the issue ..... issue is very urgent
    Regards
    Rajesh

    HI RAJESH
              This can be  done through  go to IMG--> S&D->Basic functions>Availabililty check&transfer of requirements>Transfer of requirements-->block quantity confirmation for delivery blocks. Here u give blocking reason as credit limit,,,,,, Here u find  confirmation block,here u make tick  and save . Here the reason is that even the order is saved,requirements will not be passed to MRP     i.e requirements will not be passed to stock requirement list.
                        Award points if it is helpful for u
                       Regards
                       Prasad.G

  • Production Order for variant subassemblies

    Hi all,
    I have a scenerio were there is header material called A. It has sub-assemblies C,D,E. Each subassemblies have lot of variations. So the User does not want to create individual Material Master for these variations.
    But the user wants to book the hours spend for these sub-assemblies individually for these variations.How to address this scenerio is SAP.
    With Regards,
    Afzal

    Hi Afzal,
    You have to go for variant configuration for the materials C, D, and E. 
    If the scenario demands for MTS then you have to define a new materail type
    like "STOCKABLE CONFIGURABLE MATERIAL"
    Regards
    Krishna

  • Alternative unit of Measure for variant material

    Dear All,
    Here is an interesting scenario,
    There is a naterial Billet with two variant characteristics length and size. and base unit of measure is TON. Now alternative unit of measure is PCS.  How can define the conversion factor on the basis of these two variant characteristics.
    In normal material (without variant char.)
    we can define conversion factor 1PCS= 2TON
    For variant material,
    For the material Billet with variant charc length and size how can i define conversion
    so that system calculates diff. PCS with diff. length and size but material is same. So how can i Do that.
    for example for same material Billet but variant char. Length is 6 M and size is 120*120 ,its wt will be 2 TON for 1 PCS.
    for the same material Billet with variant char. length 12 M and size 120*120, its wt will be 12TON for 1 PCS.
    How can i cater this for the same material.

    Hi Shoaib,
    We have faced the similar scenario for steel industry. Based on my experience, it is not possible to define variable values for Alternative UOM conversion with the variant characteristic/configuration, specially if you want SAP to maintain inventory with variable conversion rate.
    Use the Batch specific unit of measure for this situation.
    1) Create batch specific UOM i.e. Ton_per_pc (TOP) --- User proportional unit conversion
    2) Create batch characteristic ton_per_pc and assigned UOm.
    3) In material master additonal data select proportion unit and enter the standard conversion rate between ton & pcs.
    4) While doing GR - In batch creation you can enter whatever the conversion rate is and Inventory will be updated accordingly.
    Regards,
    Ravi.

  • Creating rules for variant

    Hi gurus,
    How to create rules for variant in work schedules.....Explain clearly.....
    iam unable to understand x and . under holiday calender....
    Explain it by taking example of having only 4 working hours before a public holiday.
    thnx in adv.....
    Regards,
    praveen.

    hi u use day of varient when u want to disrupt ur dws for some day.
    here u shd know what r the holiday classes 0 is workday.
    1 is holiday  .2 is half day holiday and 3-9 are customer specific holiday classes.
    rule NO  hclas     hcla n.d.   weekday      var
    ZA 01     X.X.......   .X........  XXXXXXX       1
    this is how we may write ur requirement .
    4 hours of working before public holiday.
    that day on which u want to apply the rule that shd be either workday or halfday so x.x 
    the next day u want as a public holiday so check 1 that is fullday holiday. 
    which workdays u want to apply this u can decide in 3rd collumn.
    this varient u give in DWS.
    and there u change ur work schedule to only 4 hrs.
    clarify with other members too.since i might be wrong.
    regards,
    raj.

  • Variable for variant

    HI
    we are facing some error in creating the process chain.
    when creating a varian for "Start process" an informatio window is opening with message variant &00000000853 in not available.
    we are trying to create a new even then we are facing the same error.
    can any body tell me in which table the variable for the variant is stored.

    hi Reddy ,
    check the Documentation of SHD0.Its nothing but modifications of Screen fields.
    Regards
    Prabhu
    Transaction Variants and Screen Variants
    Transaction variants can simplify transaction runs as they allow you to:
    Preassign values to fields
    Hide and change the 'ready for input' status of fields
    Hide and change table control column attributes
    Hide menu functions
    Hide entire screens
    In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
    Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
    There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
    A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
    In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
    No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).
    Regards
    Prabhu
    PS : Customer is First Points next

  • Authorizations for variants

    Hi All,
    I have created may own transaction that calls ABAP query and gives some report. It has its own variant for selection screen. Now as I am creating roles, I get the message that the authorization for variant is missing. So, I know how to create/edit roles in PFCG but I don't know how to add authorization for variant to existing role.
    Thx.

    Dear Suad,
    I think, the best place for your query is [Forum: ABAP, General|ABAP Development; or [Forum: SAP NetWeaver Administrator|SAP NetWeaver Administrator;
    Instead, Best way is, to Contact BASIS-Admin.
    There are few Transactions, that could be referred:
    T. Code: SE93
    You have created Z - VARIANT Transaction Code, using the Transaction and the Transaction Variant. Based up BASIS-Admin will assign the authorizations (for the respective users).
    T. Code: SU53 or ST01 - for missing Authorization
    T. Code: SU21 - Create Authorization Object
    T. Code: SUIM - Roles by Authorization Object (which is not relevant, as your's is Z-Transaction for Screen Variant)
    Best Regards,
    Amit
    Note: There are few relevant threads, it might help you
    [Roles - Authorization Issue|Re: Roles - Authorization Issue]
    [Missing Authorization|Missing Authorization] - Albert's Post
    [Authorization Object|Re: Authorization objects and Roles]

  • Routings for Variant BOMs

    Hi,
               I've created a variant BOM for material T-F. The variants are T-FX, T-FZ, etc. Now I need to create routings for the variant BOM. Could u guide me how to create routings for these variants, Whether I've to create individual routings for all these variants, or a single routing is enough?
          awaiting for ur replies.
    Thanks and Regards,
    R.Jeyaraman

    Hi,
         For variant configuration, you create routing in the normal procedure. But assign the object dependencies(Selection conditions) in the operation, operation sequences wherever it is needed to select a particular variant.
    You can also refer  for more details:
    [Super Routing procedure|http://help.sap.com/erp2005_ehp_03/helpdata/EN/92/58d455417011d189ec0000e81ddfac/frameset.htm]
    Thanks
    Muthu

  • T.code for Variant creation

    Hello Gurus,
    What is the T.code for variant creation
    regards
    sapmm

    Dear sapmm99,
    In my understanding the default values that should be automatically reflected for the input parameters for executing any report is
    referred as a variant.
    Say for Eg,executing report MB52,in case if I execute the report several times with the same input,i can save the input parameters
    and create that as a variant and in future i can call this variant to reduce the work load and execute the report.
    For eg: enter the plant 1000,material type as FERT,some material group and click on the save icon and the system asks to enter
    the variant name and the meaning and then select the check boxes for protect variant and click on copy screen assignment.
    If i want to protect the entered input parameters i can select the check boxes for the same and save and come out.
    Next time when i execute the same report MB52 and if I need some default values to get copied,i can get the variant by clicking on
    get variant or else Shift+F5 and select the saved variant.
    Check the same for the reports like ME5A.
    Check and revert.
    Regards
    Mangalraj.S

  • Class type has not been defined in Customizing as allowed for variant confi

    Hi,
    I want to use class type 200 in the varient configuration, but following error is showing so please reply me .
    Class type 200 cannot be used for materials
    Message no. CU731
    Diagnosis
    This class type has not been defined in Customizing as allowed for variant configuration.
    Procedure
    Choose a class type which is allowed for variant configuration.
    Thanks

    Thanks for ur reply.
    please help me regarding my requirements
    I will have to use the varient configuration. In this scenario multilevel BOM BOMis present & for every level varient is present.
    so how to map this scenario, so that it should pop up at the time of sales order creation. i.e. it should ask that which varient should be used at all the levels in the BOM.
    Thanks & Regards.
    Abhi

Maybe you are looking for