URGENT: SAP throws the "Deserialization failed" error.

Hi All,
I am using ABAP generated WebService in .NET 1.1.
Steps i took:
1. Generate Web Service of a BAPI in ABAP and Test it there.
2. Take its URL and Added Web Reference in my PortalApplication in .NET 1.1
3. Deployed it successfully, but when i try to run the project i.e "Portal Application" it gives "Deserielization failed" Error.
its urgent Please Help!
Help will be highly appreciated.
Thanks in Advance
sachin

Dear Vinay,
Does your other FM are also using arrays.?
Deserialization problem comes when xml parser is not able to convert XML schema or values to language specific elements.
And this problem normally comes if you are using complex data types.
Can you check once again and reply.
Regards,
Piyush

Similar Messages

MAIL: The upgrade failed - error occurred during upgrade. launching Mail Import assistant to repair damaged index did not work

After installing Yosemite, the Mail required an upgrade. the upgrade was completed but resulted in a message: The upgrade failed. error occurred during the upgrade, check continue to launch Mail Import Assistant.
This resulted in an instruction: Your mail index has been damaged. To repair it quit mail. Mail will repair index next time you open mail.
Following this instruction resulted in the same failure message being repeated continuously.
How do I proceed to upgrade the Mail app.?

If doing as the alert directs (relaunching Mail) has no effect, see below.
The new version of Mail stores its database in a different format than the old one, so the database has to be converted before Mail can use it. Sometimes the conversion fails because the old database is corrupt. The easy way to recover is to discard the old database and start afresh. You can do that without losing any messages, provided that:
☞ All your incoming mail accounts are on an IMAP or Exchange server
☞ You store sent messages on the server
☞ You don't have any "On My Mac" mailboxes
Most well-known independent mail services such as iCloud and Gmail are based on IMAP. On the other hand, ISP-hosted mail services almost always use POP. If your ISP is one of your mail service providers (or the only one), you probably can't use this procedure. Ask for further instructions in that case.
If you know that the conditions above are satisfied, continue as follows.
Quit Mail if it's running. Back up all data.
Open the Library folder in your home folder by holding down the option key and selecting
Go ▹ Library
from the Finder menu bar. Inside it is a subfolder named "Mail." Move that folder to the Desktop. You're not moving the Mail application; you're moving a folder named "Mail."
Open the Internet Accounts pane in System Preferences and recreate your mail accounts other than iCloud with the same settings as before. To recreate an iCloud mail account, all you have to do is open the iCloud preference pane and check the box marked Mail.
Launch Mail. If all goes well, your mailboxes should be restored automatically. The messages will be downloaded from the servers, so it may take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and that may be a problem if your bandwidth usage is metered.
If the mailboxes are created successfully, you can delete the folder you moved to the Desktop. You may have to recreate your Mail rules, signatures, and custom stationery. If it's very important to you not to have to do all that, ask for instructions before deleting the folder.

Crystal Reports when connecting to SAP ERP gives Logon Failed error

Hello Friends,
We are trying to implement the SAP Best Practices Crystal Reports and Xcleisus Dashboards for ERP. We are using BI 4.0 SP2, Crystal Reports 2011 SP2 and SAP ECC 6.0 FP 5.
We have done all configurations at the SAP end and successfully adpated a couple of Crystal Reports and they work fine.
My client machine crashed and I had to reinstall my Windows and all Client Tools. After the installation, when I tried to adapt a few more reports, I face the below problem:
After opeing the Crystal Report, when trying to Set the DataSource location, I select Create New Connection and select SAP Infosets. The SAP logon popup comes and I select the ECC system and enter the logon credentials for SAP ECC, I get an error message saying
Logon Failed.
Details: some square boxes.
The error doesnt really make any sense. Unfortunately, I am not able to test this scenario in any other machine as I am the only developer here. I am almost sure this is because of some configuration set up in my client machine,
Can some please help?
Thanks in advance!

Hello,
I recommend looking at a couple of things:
1) Do you have the latest Crystal transports installed with ECC? SP 2 has new transports. Check this subdirectory
Crystal Reports 2011\DATA_UNITS\CrystalReports\Collaterals\Add-Ons\SAP\Transports\unicode_compatible\cofiles
Use STMS to see if transports are installed
2) Are you using 3.1 ? Do you have the Integration Kit installed on ECC and client side?
Tammy

"The installation failed" Error

I am trying to upgrade Acrobat 9 to Acrobat XI on a Mac OSX 10.6.8 system. I uninstalled Acrobat 9 using the uninstaller in the applications folder. I then tried to install Acrobat XI Pro and at the very end of the install I get the error:
"The installation failed."
"The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
I tried multiple times logged in under different user accounts and got the same error every time. I also tried installing Acrobat X Pro with the same results. Anyone know whats going on here or how to fix it?

Try following steps:
Delete the following preferences folders:
     a) ~/Library/Application Support/Adobe/Acrobat/
     b) ~/Library/Caches/Acrobat/
     c) ~/Library/Caches/Acrobat/
     d) ~/Library/Preferences/Acrobat Distiller Prefs
     e) ~/Library/Preferences/Adobe/Acrobat/
Here ~ represents your home directory.
Then Goto Applications Folder, If Acrobat folder or application is present there then delete it,
Empty your trash, Restart the machine and then reinstall the Acrobat.

Record center - submit file soap call throwing The request failed with http status 401: Unauthorized" exception

Hi, I am trying to implement custom hold order / send to in sharepoint 2010 to send files in to holds / record center.
I am at the last step where I am trying submit the metadata using soap call- submit file
[SoapDocumentMethod("http://schemas.microsoft.com/sharepoint/soap/recordsrepository/SubmitFile", RequestNamespace = "http://schemas.microsoft.com/sharepoint/soap/recordsrepository/", ResponseNamespace = "http://schemas.microsoft.com/sharepoint/soap/recordsrepository/", Use = SoapBindingUse.Literal, ParameterStyle = SoapParameterStyle.Wrapped)]
public string SubmitFile([XmlElement(DataType = "base64Binary")] byte[] fileToSubmit, [XmlArrayItem(IsNullable = false)] Microsoft.SharePoint.RecordsRepositoryProperty[] properties, string recordRouting, string sourceUrl, string userName)
return (string)base.Invoke("SubmitFile", new object[] { fileToSubmit, properties, recordRouting, sourceUrl, userName })[0];
I am getting an error "The request failed with http status 401: Unauthorized".
Actual file was transferred successfully but while transferring the properties (metadata) I am getting this exception.
ganesh

Hi ganesh,
Please try to disable the loop back check, compare the result:
In Registry Editor, locate and then click the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
Right-click Lsa, point to New, and then click DWORD Value.
Type DisableLoopbackCheck, and then press ENTER.
Right-click DisableLoopbackCheck, and then click Modify.
In the Value data box, type 1, and then click OK.
Quit Registry Editor, and then restart your computer.
In addition, please check if these links are useful:
http://www.sharepointpills.com/2011/10/send-sharepoint-2010-document-to.html
http://www.codeproject.com/Articles/497729/UploadingplusDocumentsplusProgramaticallyplustoplu
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

"The installation failed" error message during software install.

When trying to install software, I get the following error message:
"The installation failed"
"The installer can't install some files in "/". Contact the software manufacturer for assistance."
I am attempting to install a 3rd party (Gutenprint) driver.
I know the software isn't corrupt because I installed it on another MacBook Pro.
The Mac I am trying to install it on (both MacBook Pros) are running OS X Yosemite, but that doesn't make any difference. I got the same message when it was running OS X Lion.
Any suggestions?

Try following steps:
Delete the following preferences folders:
     a) ~/Library/Application Support/Adobe/Acrobat/
     b) ~/Library/Caches/Acrobat/
     c) ~/Library/Caches/Acrobat/
     d) ~/Library/Preferences/Acrobat Distiller Prefs
     e) ~/Library/Preferences/Adobe/Acrobat/
Here ~ represents your home directory.
Then Goto Applications Folder, If Acrobat folder or application is present there then delete it,
Empty your trash, Restart the machine and then reinstall the Acrobat.

Attenpting to copy to the disk fail ERROR

im trying to sink my 80gb. IPOD
and right about half of the sink its stop and this message appear
"Attemping to copy to the disk fail. The disk could not be read from or written to."
i already restore the original settings and nothing happend
can anybody help me please
thak you

I'm having a problem when importing new cd's to my iPod. During playback, it switches tracks with 27 seconds left of the previous track remaining. The tracks play fine on my computer. I have to uncheck the album on my computer - re-sync my iPod - re-check the album on my computer - re-sync my iPod. WHAT A PAIN! PLUS I still can't burn with iTunes.

Deserialization Failed error when calling a SAP Webservice

Hello,
I'm trying to call an SAP Webservice from a .NET Mobile application, this particular BAPI expects an array of objects and when I make the call I get a deserialization problems. I have tried make the array size to 0 but no luck, I have couple of other function modules which are working fine but have a problem with this BAPI BAPI_ALM_ORDEROPER_GET_LIST.
any help is greatly appriciated.
Thanks
Vinay

Dear Vinay,
Does your other FM are also using arrays.?
Deserialization problem comes when xml parser is not able to convert XML schema or values to language specific elements.
And this problem normally comes if you are using complex data types.
Can you check once again and reply.
Regards,
Piyush

Transaction with the server failed error 405

HI,
Thanks in advance.
We are working on the MDM service provided by apple using the iPCU and have configured the server with valid certificate. But still we notice some other error. Please help us to resolve this.
Error:
(Error) MDM: Cannot Authenticate. Error: NSError:
Desc   : A transaction with the server at failed with the status 405.
US Desc: A transaction with the server at has failed with the status 405.
Domain : MCHTTPTransactionErrorDomainCode   : 23001
Type   : MCFatalErrorParams : ("https://xxxxx.xxx.com/Checkin.aspx",    405)
(Error) MC: Cannot install MDM com.xxx.mdm.mdm3. Error: NSError:
Desc   : The payload com.xxx.mdm.mdm3 could not be installed.
Sugg   : A transaction with the server at https://xxxx.xxx.com/Checkin.aspx has failed with the status 405.
US Desc: The payload com.xxx.mdm.mdm3 could not be installed.
US Sugg: A transaction with the server at https://xxxx.xxx.com/Checkin.aspx has failed with the status 405.
Domain : MCInstallationErrorDomainCode   : 4001
Type   : MCFatalErrorParams : (    "com.xxx.mdm.mdm3")...Underlying error:NSError:
Desc   : A transaction with the server at https://xxxxx.xxx.com/Checkin.aspx has failed with the status 405.
US Desc: A transaction with the server at https://xxxxx.xxx.com/Checkin.aspx has failed with the status 405.
Domain : MCHTTPTransactionErrorDomainCode   : 23001
Type   : MCFatalErrorParams : (    "https://xxxxx.xxx.com/Checkin.aspx",    405)

But in 2005 B I did the same without using license file.
Moreover, I can access the other machine's(Server) Companies from different SAP B1 server by using change Server on Choose Company Screen.
But If I install the client on a system, I am not able to access the companies.
Is it mandatory to have License to install the Client of a server?
Is it new guideline in 2007 or was it already exist in previous versions.

How to solve the build fail error when the file below mention cant be found

Hi,
i got this build fail but i cant find where the error came from and how to solve it. im stucked at this problem for quite a long time.
BUILD FAILED
C:\Infrastructure\Infrastructure\Ant\build.xml:52: The following error occurred while executing this line:
C:\Infrastructure\Infrastructure\DBSchema\build.xml:262: C:\Infrastructure\Infrastructure\Ant\OracleMiddlewarejdeveloper\modules\oracle.adf.share_11.1.1 not found
Is there any solutions to it??
Rgds,
lx

Below are my codes for the build.properties.
# Base Directory for library lookup
jdeveloper.home=C:\Oracle\Middleware\jdeveloper
src.home=..//..
# JDBC info used to create Schema
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:oracle:thin:@localhost
jdbc.port=1521
jdbc.sid=fypj
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=fusion
db.demoUser.password=oracle
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP

Integration Server connection throws ESB Server: FAILED error

I've installed BPM 10.1.3.1 on my m/c and while creating an integration server connection, I get an error as:
Application Server: OK
BPEL Process Manager Server: OK
ESB Server: FAILED
I've verified the ports in the ant-orabpel.properties file and there is no deviation in that. Am I missing anything? Any pointers to this would be of help.

Yes, I gathered that from the ESB-only distribution media.
I'm still confused.
The SOA Suite download says that it contains the ESB. It also contains an Oracle Lite instance to run against for development.
1) Are you saying that the ESB that comes with SOA Suite for Windows/Oracle Lite development purposes isn't actually ESB, and shouldn't work even though the Quick Start Guide shows an "ESB Server: Success" message, not an "ESB Server:Failed" message?
2) What about the error messages in the previous posting -- is the WSIF for ESB supposed to be broken in the Developer installation?
3) Do I have to install the full OracleAS, Oracle DB, etc... to run the examples as documented?
4) Should I just not care and do my proof-of-concept work without the use of ESB at all?
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html says:
Oracle SOA Suite 10g (10.1.3.1.0)
Included: Oracle HTTP Server (1.3.x based)
Oracle Containers for J2EE (OC4J)
Oracle Enterprise Manager 10g Application Server Control
Oracle Application Server Guard
Oracle Application Server Recovery Manager
Oracle ADF
Merant DataDirect JDBC drivers
Oracle BPEL Process Manager
Oracle BPEL Process Manager Control
Oracle Business Rules
Oracle Enterprise Service Bus <---------------------------!!
Oracle Enterprise Service Bus Control
Oracle Web Services Manager
Oracle Web Services Manager Control
Oracle Lite (Windows only)
Oracle Application Server Cloning Tool
Oracle TopLink
XML Query Service

How do I fix the "modification failed" error?

When I try to add a new event to my Lightning calendar I get this error, the calendar is locked as "read only" and when I restart the app the event is no longer in the calendar. I have seen this sort of error for as long as I have been using T-bird but it has never been so total.
I am running under windows 8, T-bird ver 24.4.0 and Lightning 2.6.4. It appears I have enabled test pilot for Tbird and it is ver 1.3.9.
These calendars were copied from my old computer's hard drive and I am guessing there is something different about the format??? That Tbird was stuck on an older revision which I don't know the number.

Right click the calendar and select export as ICS.
Then try importing and see if it helps.
Are the "events" showing as your the owner... There were issues at one point where calendar items that were not "owned" by you were not able to be edited.
Help menu )Alt+H) ? troubleshooting information.
Click the show button for the profile.
Close Thunderbird
Open the folder "Calendar data" look at the properties for all the files and make sure they are not read only. Correct as necessary.

Outlook 2010: Getting a "the operation failed" error when accepting invite from inbox

One of the people I support is using Win 7 and Office 2010. When accepting an invite in his inbox, he gets "This Operation Failed", however this behaviour only occurs for internal staff who email him through Exchange. I emailed him from an external email
address and he was able to accept the invite and have it appear in his calendar correctly.
We are running Exchange 2007 and his client is Office 2010.
I'm going to try the following to try to get to the bottom of things
1. Check account settings
2. Disable antivirus
3. Try non cached mode
4. Check Delegate access?
5. Check event logs
6. Office updates / service packs
7. Repair job of Office 2010
8. Reinstall Office 2010 or install 2007
Does anyone have any other suggestions?

Glad your issue has been resolved.
Thanks for your sharing.
Evan Liu
TechNet Subscriber Supportin forum
If you have any feedback on our support, please [email protected]
Evan Liu
TechNet Community Support

Attempting to copy to the disk failed error (picture)

What do I do? Wow I formatted the drive then did a factory restore and I still get this stupid error.... ***?
[img]http://img.villagephotos.com/p/2005-9/1074689/Error.JPG[/img]

I don't know if you've found a fix for your problem or what exactly could be causing it, but I'm wrestling with the same issue myself.
Some say it's happens when your files are corrupted.
If you read this post -- http://discussions.apple.com/click.jspa?searchID=-1&messageID=887569 -- and the subsequent replies there is a work-around to this using MusicMatch and other suggestions that may help.
Custom PC running Windows XP

How do I fix the "modification failed" error? And Dismiss calander reminders

When moved to new laptop Calendar syncs temporarily then disappears completely. I remove read only tick which appears every time start TB after reloading links to Google calendar.As soon as I do this it disappears.
Also calendar reminders wont dismiss.
Please help

Right click the calendar and select export as ICS.
Then try importing and see if it helps.
Are the "events" showing as your the owner... There were issues at one point where calendar items that were not "owned" by you were not able to be edited.
Help menu )Alt+H) ? troubleshooting information.
Click the show button for the profile.
Close Thunderbird
Open the folder "Calendar data" look at the properties for all the files and make sure they are not read only. Correct as necessary.

URGENT: SAP throws the "Deserialization failed" error.

Similar Messages

Maybe you are looking for