[URGENT] Signout issue - Possible Breach

So, I signed in to skype.com using my Microsoft Account and signed out.. Then opened a new tab and opened outlook.com, it directly opened my account.. There is same issue on other microsoft sites.. So is it a security issue? FYI, I'm using IE9 on Windows 7..

Similar Messages

A very urgent deployment issue about DBAdapter

Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
Kerr

Hi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd

Encountered just about every issue possible trying to sync music to iPod Touch after 8.1

If you're having any sort of syncing problems after the updates, bear with me as I tell my tale. Hopefully you can find yourself relating.
I have an fifth generation 64gb iPod Touch. Ever since I've updated to iOS 8 (then 8.1), I'm beginning to look at it as useless. I know there are all sorts of threads out there about people having difficulty syncing their music after the update, and I'm probably not covering any new ground, but I thought it was worth reporting every problem I've encountered and all the fixes I've tried.
I have a large music collection. Around 7000 tunes. They're all safe and backed up to my iTunes library on my MacBook Pro. I was aware that updating the iPod to iOS 8 might cost me a considerable amount of storage space, so I did it cautiously. I did it through iTunes, and I had no real issues. It didn't take up the huge amount of space it did for others. But my music collection on the device became all sorts of screwed up. Suddenly I was missing entire albums and artists. What albums and artists were still there often only had the first track of the album. Many songs were kicked off the device itself and I had the option to download from the cloud (I assume that's what that button meant). For about two weeks, I was too busy to listen to music, so I put the problem out of my head.
Last week I finally decided I needed to get around to fixing it. I plugged it into my USB port, and iTunes told me I was 20+ gb over capacity, with the 'Other' bar taking up most of the storage. I only had a few photos and apps on my iPod, but I deleted them anyway. I started going through my iTunes library and haphazardly deleted albums I figured I could go without. None of this even put a dent in getting more storage space. I quickly realized that I still needed to update my MacBook to OS X Yosemite, as well as get the accompanying iTunes update.
After the (justified) hours and hours of updating everything (absolutely everything I'm discussing is on the latest update), I plugged my iPod back in, and surely enough, the capacity bar reflected the actual amount of music I had. I had a good nine or ten GB to spare. 'Other' was barely taking up any space. I was elated, so I clicked sync. iTunes quickly jumped to either Step 4 of 4 (Waiting for Changes to be Applied) or 5 of 5 (Preparing to Copy Items) and hung. I gave it close to 45 minutes, and nothing was transpiring. I tried over and over. I'm not syncing via wi-fi (although I did try that). I'm syncing manually. I tried every permutation possible. Syncing only checked artists and albums (checking all those artists, by the way, takes a good fifteen minutes), syncing the entire library. Everything. After reading about people having similar issues online, I decided I may as well reset my iPod completely and set it up as a new iPod.
Again, I don't use my iPod for photos or apps, so I'm not having to worry about losing anything in the process of resetting. There's no need to restore from back-ups- all my music is in the my iTunes library. I don't really "do" iCloud, and any restore points on my computer are automatically done and unnecessary. After resetting, I tried to sync. Again, straight to the last step of the syncing process. I was patient, but clearly nothing was going to happen. I must have reset my iPod and set it up as a new device about five times. Finally, I got a sync to seemingly start working. I watched as all my music started turning black in the 'On My iPod' screen. I periodically checked the device itself, and noticed that, arbitrarily, I was only getting random tracks from albums, often the first track (for instance, I have every Beatles album, but I was getting one track per album on the device). When it finished syncing, I clicked on the tunes listed under 'On My iPod,' and found that many of them popped up with an exclamation point, indicating, I assume, that the song was unable to sync.
I reset again. Multiple times. Trying everything. I finally decided to sync only checked songs, and I checked one artist (embarrassingly, ABBA). Surely enough, the full ABBA album synced fine. I slowly started checking more and more artists. It was working. I got all the way to the bottom and watched as everything started syncing as it should. Entire albums were showing up on my device. Half an hour later, everything was synced, and I couldn't have been happier. I disconnected the device and went to listen to some music, only to find that everything was gone. Everything that I just watched sync perfectly to the device. I had no content on the device. Nothing at all. I reconnected it, and suddenly I was grossly over capacity again (I wasn't at all when the sync had finished). The bar did not, at all, reflect the contents of the device (in fact, I had nothing on the device at this point).
More resets. Again, I would get either no syncing at all, or only getting one or two tracks from artists. Finally, I called Apple Support while it was syncing again to explain the problem. The man said he's been getting vaguely similar reports. I told him that it appeared to be syncing properly as we spoke, but that I was confident I would lose all my music again once the sync finished. He stayed on the line, and bizarrely, out of nowhere, it synced perfectly. I disconnected the device, and I had a fully functional iPod again. For the past week, I've had no issues with it. After this successful sync, by the way, I was told I had 8.7GB of free space, which I would call accurate. The 'Other' was hardly there.
This morning, I added some new albums to my iTunes library, so I connected the iPod and clicked sync. Nothing. The new songs showed up on the 'On My iPod' screen, but they were greyed out with the loading circle. I waited an hour as it hung at 'Waiting for Changes to Be Applied' or 'Preparing to Copy Items'- I forget which, but I became accustomed to both. I was only adding maybe fifty new songs, but no progress was being made in terms of syncing. They remained greyed out. Not wanting to reset the iPod, I called Apple Support again. The man remotely accessed my screen and seemed quite puzzled. He saw the almost 9GB I had to spare. He had me click some of the obvious settings I'd tried time and time again. Finally, he had me, for a third time, switch from 'Sync Checked Songs' to 'Manually Manage Music and Videos.' He and I witnessed the capacity bar immediately change to 42GB over capacity! 42GB! He accused me of legitimately being 42GB over capacity (I'm not mad at him- he was very nice, by the way), and I pointed out how ridiculous that was. He agreed. After more and more troubleshooting, I told him it was a lost cause, and my only hope was to reset the iPod again. I realized that, from now on, whenever I sync new music from my library, I'm going to have to reset the device and sync from scratch. I got off the phone with him and did just that.
Two attempts failed, again hanging at those dang last steps. I was patient as can be, understanding how much music I had. An hour later, nothing. I tried once more, syncing artists slowly at a time, and suddenly, arbitrarily, it chose to miraculously sync perfectly. I walked away from the computer and iPod and took a long walk to clear my mind. I came back, and looked at the 'On My iPod' screen. Every song was black and on my device. I turned on my device, and... one track per album. When I clicked the songs that were allegedly on my iPod, I was getting exclamation marks, and they wouldn't play. The songs that sync and don't sync are entirely arbitrary and change every time. It's not a matter of corrupted files, I don't think. If it were, I would expect the same songs to be giving me the difficulties. The capacity bar offered an accurate reflection of what my device would be if everything were, in fact, synced. Even though only probably 10% of my library had made it to the device, iTunes told me that everything was synced and was taking up the appropriate amount of space. I disconnected the device, turned it on and off, quit iTunes, restarted my computer. I connected the device again, and the capacity bar now told me I had almost nothing on my iPod. I checked, and the iPod, once more, was devoid of content.
I have no idea what to do. I'm at a complete loss. I don't get it. I've tried nearly every fix that has been suggested online. I've tried all the different ways of syncing. I'm not syncing voice memos. I don't have any strangely titled tracks. I don't have any tracks that are unattributed to an artist or album. I have no duplicates. I have OCD, so my iTunes library, though vast, is kept in tip-top shape, and everything is ordered and tagged perfectly.
Wow. Hold the phone. I'm currently both overjoyed and even more flabbergasted. As I typed this long message, I left my device plugged into my computer. I didn't start a new sync- just left it plugged in. I happened to look at it just now, and, um, everything is synced. My iPod is working again. Still, this has become an ordeal that needs to be addressed. I'm scared to death of what will happen next time I want to sync new music to the device. I suspect more and more hours of resetting and fiddling with options. I want to stress enough that I'm positive this isn't a matter of me not being patient enough. Often times, I do indeed cut the sync short when no progress appears to be made, but I just as often leave it running for long periods of time.
This whole thing leaves me very on edge. Even operating the device scares me, because I'm getting excessive lags, and I'm worried that at any moment, the music will be gone again.
Anyone else going through this ordeal? Specifically these problems, or, like me, all of them at different times? Anyone randomly find that they're occasionally almost humorously over capacity? I'd like to hear your input. On my end, the only fix I've found is to just keep resetting the iPod as a new device over and over again until it eventually works properly. Again, this is pretty effortless (though time-consuming) for me, because I don't have any pictures or apps to restore. I use it solely for music. I can't imagine the stress of worrying about losing items other than music. Is this general and bizarre syncing problem just a bug that will eventually get fixed? Is Apple aware of it? When you've faced as many dead-ends as I have, it's hard to specifically articulate the problem to them. Can anyone relate or offer any fixes?
Again, using a 64GB fifth generation iPod touch updated to 8.1. 2GB non-retina MacBook Pro. OS X Yosemite. iTunes 12.0.1.26.
I also have a 64GB iPad 4, and I'm still debating whether or not to update it.

Kind of a similar issue with me.
I've got an ipod touch that I use for my music only. The vast majority of what I have loaded in my iTunes library on my laptop is music I've imported into iTunes from my cd collection. I have several albums that came from non-iTunes digital purchases (cdbaby, amazon, etc), and then guess a few hundred albums purchased from the iTunes store.
Everything seemed to work fine with ios 7 but once I upgraded my ipod to ios 8 I started having sync issues. My problem seems to be isolated to music that I did not purchase from iTunes (which is currently most of my music). I'll sync the ipod with my iTunes library on the laptop and I end up losing all non-iTunes purchased content on the iPod. The albums still 'show' on the iPod screen but once I select one to play it quickly scrolls through all the tracks and comes back to the screen showing the tracks with the red circle. If I go check the number of songs on the iPod in the settings>general>about option it will now have deceased the total number of songs by the number of tracks that were on the album.
I'm not a 'technical' type of user so everything I was trying to correct the issue was pretty much just change settings options in iTunes on the laptop and/or settings on the iPod without any real knowledge or confidence that it would help.
Eventually I gave up and deleted all content on the iPod and restart it as a 'fresh out of the box' iPod. It took several attempts at that to get all my songs copied from the laptop back to the iPod. After several attempts I finally thought it might have to do with the iCloud feature on the iPod (since it was only syncing iTunes purchased items and ignoring everything else not purchased via iTunes I thought it might be trying to verifying the items before actually loading them).
I completely set up the iPod again but used the option to not use iCloud (I don't use it to back up/store anything anyway). That attempt resulted in all my songs/albums syncing from the laptop to the iPod. Everything seemed to working fine for the past few months but then it happened again the other day. I had purchased a cd and imported it into my iTunes library... plugged in the iPod to sync everything and it wiped out all the non-iTunes purchased content again.
I deleted all the content off the iPod and did the 'out of the box' setup again and everything synced. Then this morning I purchased an album off of iTunes, hooked up the iPod to sync and again, it wiped out everything except my iTunes purchases.
This is getting beyond frustrating. The reason I've gone with apple all these years is because they are supposed to be 'idiot proof' for those of us that have a lot of knowledge of how/why all this works.

(Urgent) Sysdate issue in Oracle applications scheduler.

Hi All
I have used the query 'SELECT SYSDATE FROM DUAL' for a parameter in concurrent request. If I execute this concurrent as a single request, then it returns exact sysdate (current date) in a parameter.
If i schedule this program for daily execution using scheduler, then the sysdate is always giving value of the date when i have configured the scheduler.
For example,
My Requirement :The scheduler configured such a way that it should run everyday.Whenever it runs my query has to return the current date.
Current Issue: I schedule the scheduler on 23-Dec-2008. If it runs on 24-DEC-2008,it returns as '23-DEC-2008', If it runs on 28-DEC-2008 also,it returns as '23-DEC-2008.However If I execute this as a single request, it works fine.
Can anyone help me please,,It is very urgent.
Thanks in Advance

Hi,
I can confirm that this does work properly on 11.1.0.6 . Here is the code I used
-- create a table for output
create table job_output (log_date timestamp with time zone,
        output varchar2(4000));
begin
dbms_scheduler.create_job (
    job_name => 'myjob',job_type => 'plsql_block',
    job_action =>
'insert into job_output values(systimestamp, ''myjob runs'');',
    repeat_interval=>'freq=minutely',
    number_of_arguments => 0, enabled => true);
end;
exec dbms_lock.sleep(130);
select * from job_output order by log_date ;The table job_output clearly shows dates increasing by one minute every run. If you use "freq=daily" instead then the job will run once a day instead of once a minute.
Does this example work for you ? If not could you post output from the job_output table and tell us what version database you are using.
Thanks,
Ravi.

Some urgent chart issues : Lost labels & erroneous decimal places

Hello everybody,
we have some new and really urgent problems with some charts.
Lost labels
Like you can see in the figure below, our charts sometimes loose some lables on the graphs.There are some different scenarios for the problem.
1) Two neighbouring bars have similar values and similar height. So the labels would overlap. In that cases, the charts loose one of the two labels. (see the yellow markers on the bars in the figure below)
2) A chart´s graph tends to the maximum scale of its surrounding container div. The chart components then often "decide", that they do not have enough space for a label and so do not display these labels (line in figure below).
Is there any possibility to fix these problems? Manipulating the charts via css doesn´t work, because the missing elements are not created at all. So there isn´t any element in the DOM that could be adressed.
Erroneous decimal places
In addition to the problems above, we have another one that causes ugly headaches. The values in some charts have 14 decimal places. Settings in the query (we use BW queries as DataSrc) or in the initial view are completely effectless. First we supposed that the problem correlates with some chart types, but in the meanwhile we get the problem with almost all types.
Is anybody out there with similar problems or any ideas to fix the problem?
Thanks so far & kind regars,
Sebastian

Hi Tammy,
thank you for your very quick response. I´m working with IE 10.0.9200 and Design Studio 1.2 SP1. The Application runs normally on a BOE-Server. but the problems occur even when i run the application locally.
But first of all i will check the thread you recommended.
Thanks for your help!

Very urgent Decimal issue in ADF page

Hello friends,
i have an issue in ADF page which was weight field, issue has below.
1) weight filed was validated that without entering 5 digit value in filed, example suppose i enter 12345 in weight it is showing that in small dialog box -weight value should be 0 to 9999.999 only. but it is let me to go next field and submit button. it is happening only in create page only.
2)but when i go to detail page , same weight fild is populated there - i enter invalid weight something 12345, it is showing that in small dialog box -weight value should be 0 to 9999.999 only. but here let me not go to another filed until i ENTER valid value.
create page weight filed need to work same as detail page.i am new to ADF development, how to check where this validation done and how to fix this.
very very urgent.
Thanks,
vamshi.

If you use ADF BC, open the entity and choose "Business Rules". You can then add validation rules such as range limits under the attributes. It is usually best practice to include validation rules in the entity (model layer), this way they apply automatically to all view objects based on the entity and you are guaranteed to have only valid values in the database. (View layer validation may have its place as a convenience supplement.)
Read more about business rules in the developer's guide: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcvalidation.htm

Urgent Performance Issue

Hi,
Can someone please tell me and explain me that if i have performance issue at the portal side then what cache settings i have to choose at rsrt and then at the reporting agent level.
I will appreciate if you can explain me also in detail.
I will appreciate and award points.
Thanks
Sakshi

Hi Sakshi,
For your question pls read the following document carefully, so you will know the correct information,
regarding your question.
Read Mode
The read mode determines how the OLAP processor gets data during navigation. Three alternatives are supported:
1. Read when navigating/expanding the hierarchy
In this method, the system transports the smallest amount of data from the database to the OLAP processor but the number of read processes is the largest.
In the "Read when navigating" mode below, data is requested in a hierarchy drilldown for the fully expanded hierarchy. In the "Read when navigating/expanding the hierarchy" mode, data in the hierarchy is aggregated by the database and transferred to the OLAP processor from the lowest hierarchy level displayed in the start list. When expanding a hierarchy node, the system intentionally reads this node's children.
You can improve the performance of queries with large presentation hierarchies by creating aggregates in a middle hierarchy level that is greater than or equal to the start level.
2. Read when navigating
The OLAP processor only requests the data required for each query navigation status in the Business Explorer. The data required is read for each navigation step.
In contrast to the "Read when navigating/expanding the hierarchy" mode, the system always fully reads presentation hierarchies at tree level.
When expanding nodes, the OLAP processor can read the data from the main memory.
When accessing the database, the system uses the most suitable aggregate table and, if possible, aggregates in the database itself.
3. Read everything at once
There is only one read process in this mode. When executing the query in the Business Explorer, the data required for all possible navigation steps for this query is read to the OLAP processor's main memory area. When navigating, all new navigation statuses are aggregated and calculated from the main memory data.
The "Read when navigating/expanding the hierarchy" mode has a markedly better performance in almost all cases than the other two modes. This is because the system only requests the data that the user wants to see in this mode.
The "Read when navigating" setting, in contrast to "Read when navigating/expanding the hierarchy", only has a better performance for queries with presentation hierarchies.
In contrast to the two previous modes, the "Read everything at once" setting also has a better performance with queries with free characteristics. The idea behind aggregates, that is working with pre-aggregated data, is least supported in the "Read everything at once" mode. This is because the OLAP processor carries out aggregation in each query view.
We recommend you choose the "Read when navigating/ expanding the hierarchy" mode.
Only use different mode to "Read when navigating/ expanding the hierarchy" in exceptional circumstances.
The "Read everything at once" mode can be useful in the following cases:
The InfoProvider does not support selection, meaning the OLAP processor reads significantly more data than the query needs anyway.
A user exit is active in the query that prevents the system from having already aggregated in the database.
If it is Useful informatin to u pls provide points.
have nice day.
by
ANR

URGENT - Encoding issue

Hi guys, I'll try to be as specific as possible.
I'm running CS5.5, and yesterday I tried to encode a film I've been working on to upload to Vimeo/YouTube. The movie is 1080p and 24fps, so I chose H.264 and then the HD 1920x1080, 24fps preset.
It gets to 99% and then stops dead. No freeze, no apparent technical issue - it just stops with 1 second to go. I tried using the direct exporter from PP, and the AME queue system - same issue.
Before anyone asks, I've gone through with a fine tooth comb and there are no gaps anywhere in the video. I have tonight and tomorrow to get this sorted and I've never done this before, so anyone who could shed some light on this would be my hero.
Thanks in advance.

Oh I didn't realise. How long does that normally take? Maybe I was a bit hasty

Urgent : Export issue

Hi,
I had an export script to export my database full. It was running well every day until this morning I met this issue. If someone can help me, it's very urgent !
Thanks
bash-3.00$ ${ORACLE_HOME}/bin/expdp system/xxxxxxx full=y directory=EXPORT_DUMP_M3PROD dumpfile=${DUMPFILE} logfile=${LOGFILE}
Export: Release 10.2.0.4.0 - 64bit Production on Monday, 18 May, 2009 11:06:13
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORA-31626: job does not exist
ORA-31650: timeout waiting for master process response

So, I opend a SR in Metalink.
They ask me to rerun catproc.sql and give me a note to delete orphaned jobs
Frist of all the CATPROC component should not be INVALID in the database
For this you have to rerun the catproc.sql script which can be found in $ORACLE_HOME/rdbms/admin
ACTION PLAN
============
1. startup restrict
2. spool catproc.log
3. @?/rdbms/admin/catproc.sql
4. spool off
Second please use Note.336014.1 Gen Ext/Pub How To Cleanup Orphaned DataPump Jobs In DB
A_DATAPUMP_JOBS to cleanup the data pump jobs and then retry to export
Thank you !!
oldschool

Adobe X (10.0) Scan/Print Issue (Possible OCR Issue?)

Hello all,
After the Marine Corps mandated upgrading from 8.x to 10.0, we've had some issue with scan documents not printing correctly.
Documents appears to scan normally, just as before, however when we print them- they print with all the text blocked in solid black.
Playing around with different scanner/Adobe settings, I believe I have narrowed it down to OCR issues.
Scan to Picture = Prints perfectly (No OCR)
Scan to Document = Prints with Black Blocks around the Text (w/OCR)
To me that points to OCR.
Thoughts? Tips? Fixes?

Hi,
I tried reproducing this issue with HP Photosmart Premium scanner but could not replicate this issue.
The scenarios I tried were:
1: Scanning via Scan button on Scanner as a document i.e. an OCRed PDF and then taking a print out of that scanned PDF.
2: Scanning using Acrobat along with OCR using Searchable Image OCR technique and then taking a print out of that scanned PDF.
3: Scanning using Acrobat along with OCR using Clear Scan technique for OCRing and then taking a print out of that scanned PDF.
In all the 3 cases, this issue was not visible.
Could you please let us know your machine details, scanner and printer model you are using.
And if possible can you please share any file (with OCR and without OCR) for which you are seeing this issue.
Thanks.

URGENT Battery Issue...

Hello, I'm in desprite need of help... I have a HP G62-34OUS Notebook, I've had it since around Febrary of last year. I also have a warrenty with Staples where I bought it.
My issue is that the battery won't latch. And I haven't taken it apart or anything! I've taken very good care of it, and the batterie's only defect would be a small corner being bent. The bent corner is barely noticable and has worked for the last six months that it's been that way.
What should I do about this? I'd like help urgently... This is being typed while it is on a power supply in my wall, my area has gotten a lot of storms lately, so please try and hurry... Thank you in advance for those who reply!
~Justin Greenough

I would suggest using the warranty at Staples. If you open it on your own, chances are it might be havinf some issues, worst case, void your warranty.
I say bring it to staples with your warranty card.

A few iPod issues (possibly Vista related)

In the past few weeks, my iPod (80GB 5G) has been acting awfully strange, for a few reasons:
- When I try to update it, iTunes (v7.0.2) gives me the error: "Attempting to copy to the disk "IPOD" failed. An unknown error occured (-69). On occasion, it appears to update normally, but when I check the iPod's contents, it's missing several hundred songs.
- When I try to restore the iPod to factory settings with the 'Restore' button, I get the error message "The iPod software update server could not be contacted."
It seems very possible that these errors are due to the fact that I upgraded to Windows Vista around the time I started noticing these issues. Since the Vista knowledge base doesn't seem to address these specific issues, I'm not fully convinced that this is the case. So...I'm at a loss. Can anyone help me?

Welcome to Apple Discussions!
iTunes 7.0.2 does not fully support Windows Vista. For more information about using iTunes with Windows Vista, see the following articles:
iTunes and Windows Vista: http://docs.info.apple.com/article.html?artnum=305042
iTunes Repair Tool for Vista 1.0: http://www.apple.com/support/downloads/itunesrepairtoolforvista10.html
An update to iTunes is expected fairly soon. The next version will natively support Vista.
About the update server cannot be contacted: that error could be caused by a network setting. See the following article for more information: http://docs.info.apple.com/article.html?artnum=304468. I'm not sure if the windows will look the same in Vista (haven't had a chance to lay hands on it yet...I also have PCs in the house), but it gives you a rough idea. Hope this helps.

Urgent qty issue more

hi expert
my issue is as.vendor sent goods 3900, in GR they have done for4000 in plant(a)
this plant deliver the goods to plant(b)4000 and billing qty is also 4000.my issue is i wants to take back qty100 back and .how to reverse is qty plz suggest
urgent
points will be awarded

hi expert i wants to add on thing plant(b)actually receipt3900
qty.how to match difference

Urgent help - Issue with Search results in Web help (Robohelp10)

Hi,
I am facing an issue with the Search tab of my Web help output. The search is performed only on a part of the text entered.
For example, I search for a word "Planning", the results are generated for "plan".
I search for the word "Table", the results are generated for "Tabl"
I search for "corresponding", the results for "correspon" are displayed.
Is this an existing issue? Is there any fix for this.
Please help.

Hi there
This is the option Jeff was referring to. I see it in my own RoboHelp version 10. As we aren't seeing it in your screen capture, I'm wondering if this was an option that was added via a service release you haven't installed.
I do suppose another possibility would be that you are using RoboHelp for Word and perhaps that isn't an option with that application.
Cheers... Rick

**URGENT** - PRODUCTION ISSUE with Planning Layout

Hi,
we've a manual planning layout that uses both macros SAPAFTERDATAPUT and SAPBEFOREDATAGET with custom code developed in these 2 macros to switch data between "SEM-BPS 1" and "New" sheet.
Layout has 11 characteristics in lead columns and around 40 keyfigures in data columns (dynamic).
Using macros, we are formatting SEM-BPS 1 sheet to display all dynamic data coumns in a single page of New sheet.
for this, our custom macro formats each row of SEM-BPS1 into 10 rows of New sheet by reducing 40 columns into 4 (columns is what matters for our users but not rows).
We tried this for 40 rows of data. (means, 40 rows 40 columns). Our Custom macro formed 400 rows and 4 columns into New Sheet and even switched data between "SEM-BPS 1" and "New" sheet as per our macro coding. here, we can execute all planning functions. fine till this point
Now, we have a problem when dealing with 100 rows. (means, 100 rows 40 columns). Our custom macro had formed 1000 rows and 4 columns as expected with accurare data. 
at this point, When we started running any planning function or even when we just click on check button (check button runs both SAP macros, I assume), system is freezing up doing nothing. each time, we had to kill the process. when we looked into CPU usage, we can see that excel.exe process is using 99% of CPU.
Appreciate if any one can share experinces on this.
Note: 
1. By disabling custom macros, we executed 100 rows 40 columns w/o any issues.
2. when executed custom macros outside of SAP for 1000 rows 4 columns, both macros took just 2 seconds to switch data between sheets.

Hi there
This is the option Jeff was referring to. I see it in my own RoboHelp version 10. As we aren't seeing it in your screen capture, I'm wondering if this was an option that was added via a service release you haven't installed.
I do suppose another possibility would be that you are using RoboHelp for Word and perhaps that isn't an option with that application.
Cheers... Rick

[URGENT] Signout issue - Possible Breach

Similar Messages

Maybe you are looking for