Urget please moving to testing system

Dear All,
I am new to BW. I have bulit a report(Development system). What is the process after that? It needs to be in portal. How that report will be transported to Test System. which one is first task? Portal or test system. Do i need to ask basis guy to do these? Please explain me in detail as i have no experience.
also, we have  2 systems bw test1, bw test2. I think after bw tes1 it has to go to  bw test2 system. why is that?
the only information  i know is if i have transport request, it needs to be released and approved. Once it's done, what is the next step? Please help me as a matter of urgency. I am stucked here.
If i don't have any transport request for report, what should i do?
Eagerly waiting for reply..
Riya

You have the report in development, then you need to create a transport for the report, once you collected the report into a transport (Go go RSA1, transport Connection to collect transport or do some reading on this), you need to release transport to the next system in the landscape, as you said the next system in the landscape is test1 and later to test test2. Two test system is just to make sure the report is tested well before moving to production
To have the report on the portal, you don't need to do anything more than attaching the report to the proper role, once you attach it, it will be available on portal.
To move the transport to the next system, you ask the basis to move it for you once you release the transport (SE10 and release).
Once the transport imported to target system, you need to make sure that the transport imported successfully and validate the report in target system and ask user to test the report and move on....
I am not sure how you can attach the report to proper role, it depends from company to company, you might need to attach it to role before you move to target system or you might have authorization to do it in target system itself.
Hey, take it easy you will make it.
thanks.
Wond

Similar Messages

  • Who moved the transport to a particular test system?

    Hi,
    I would like to find out that which user id has moved a particular transports in a given test system? I was unable to find this in the transport log? Any idea on where to look for this info (source system, target system....) ?
    thanks for the quick help.
    regards,
    HB

    Hello,
    You can get this information inthe STMS queue.
    First goto the STMS queue and then select the option of the Import History.
    once in the impot history following the following path EDIT--> Dsplay More and you will get the details as to which client the transport was imported and the user who has imported the transport request.
    Please Note :The Import Histroy would show only the list of the imports that have happenend in that week. To increase the selection increase the date range by making use of the filter option.
    Regards,
    Sowmya

  • Steps for Go Live for Webtools moving from Test to Production

    Further to the useful checklist in the wiki recently supplied by Bryce can I ask for some minor gaps to be filled ( perhaps by inserting a few additional steps in that document)
    I have yet to hit the issues created by a go live implementation but this is only a matter of time...
    I am trying to work out what needs  to occur between having :
    a) a test B1 database successfully synching to a test WT site and db set up
    and
    b) the Production B1 database initially synched to the the live WT live WT db ready to accept the first live transactions.
    1) Copy WT site from test to live location
    2) Change Server config, settings and Tables tabs in Synch Manager click on 'Install Plugin' to add custom fields to Production B1 database
    3) ......
    I am stuck as to what needs to be done to "reset"  the WT back end db and how one goes about this.
    Coupled with this and probably part of the answer is the 'Initialise Synch' button. It would be useful to understand exactly what this does in terms of data  - presumably it is only transactional data - but which tables are affected?
    Also if there's anything else that I might have overlooked in terms of potential pitfalls I'd be grateful for advice - the recent posts regarding product trees and images come to mind.
    Thanks

    First thing is to plan for some downtime in your B1 databases. Nothing more frustrating than having new data come into b1 when you're trying to set this up. So perhaps do this at night or on a weekend when no one is using B1.
    Install Plugin operation adds UDF's, edits the stored proc in b1 db, and creates the queue table, PRX_Transaction_Queue
    Initialize synch runs upgrade scripts(if applicable), deletes all data that has synched from B1 previously(or would synch from Wt to B1, like a test order created in Wt) and inserts all relevant data into the queue table in B1 db. Also the synchid's are reset. It's pretty much the same list as is displayed on the Settings page of the Synch Manager. Please someone correct me if I'm missing something here!
    Pre-requisites:
    - Name the Wt db relevant to its position in the environment. B1Webtools is not the greatest name, it's meant to be a jumping off point. Rename your Wt db in the way that you would for B1. ie WebtoolsLive, WebtoolsTest. Makes things easier
    Two options:
    1) Presuming you have a test Wt db and a test b1 db or even a test Wt db and a production(live) B1 db, you could duplicate the test Wt db and change the synch manager config to point to the B1 live db. Install the "plugin" on the new B1 live db and enter your table mappings. Initialize synch will delete all the data that has synched from B1 test db to Wt db(now live db) and reset the synch id's to zero. These will be populated during the synch. Then Run Synch.
    Caveat: This option is fine if your synch takes a "short" period of time. Short being an hour. If you have say 20,000 business partners with 3 years of order history and 300 lines per order... expect several hours.
    2) Create a test synch profile and a live synch profile in tandem and update only the live synch profile with data. Also, have two web tools websites but work primarily in the live one. The synch manager will auto synch both profiles every time the service runs(set by you)
    When it's go time, copy the live db's over the test db's so you have a test environment exactly matching your live environment.  Now, obviously as soon as new data goes into the live db it's out of synch, but this way you have a test system you can break or use to test upgrades, etc.
    As you might guess, there are a number of ways to go with this. It really does depend on a) how comfortable you are with moving data around in SQL and b) what your setup entails.
    I think the best thing you can do is make it as simple as possible. Don't overthink things and make sure you have a backup of everything before you start.
    Good luck!

  • Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

    Need detail information, steps would be nicer,  to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

    Hi,
    Overview of the upgrade progress from Exchange 2003 to Exchange 2010 including the following steps:
    Installing Exchange 2010 within your organization on new hardware.
    Configuring Exchange 2010 Client Access.
    Creating a set of legacy host names and associating those host names with your Exchange 2003 infrastructure.
    Obtaining a digital certificate with the names you'll be using during the coexistence period and installing it on your Exchange 2010 Client Access server.
    Associating the host name you currently use for your Exchange 2003 infrastructure with your newly installed Exchange 2010 infrastructure.
    Moving mailboxes from Exchange 2003 to Exchange 2010.
    Decommissioning your Exchange 2003 infrastructure.
    For more details, please refer to this following document.
    http://technet.microsoft.com/en-us/library/ff805040(v=exchg.141).aspx
    Best Regards.

  • Need to activate enhancement manually in testing system

    Hi,
    I met a very weird issue in our testing system.
    When we moved the implicit or explicit enhancements from development system to testing system, it did not work.
    We needed to manually activate the enhancement --> then it worked.
    Please advice if you met or knew the issue.
    Thanks,
    Khanh

    Close!
    No answer!

  • Open and close posting periods on test system

    Hello together,
    to open and close posting periods is only allowed on the develepment und the production client, but not on the test client.
    It is an customizing object, but the flag "current settings" is set, so you also can change the settings on the production system.
    In the test system, it only can be changed by opening the system for customizing using SCC4 und change to "Changes without automatic recording".
    Is there a way to allow open and close posting periods on the test system without opening the client for customizing?
    Regards,
    Michael

    Hi Michael,
    Please, refer to the note 356483. Proceed as following:
    Call transaction SE54
    Enter the Customizing object (view or table)
    Select "Generated objects"
    Choose "Create/change"
    Select "no, or user, recording routine" in the bottom part of the screen
    Save the change
    The view in your case is V_T001B.
    Regards,
    Eli

  • Probelms while replicating Data Source and transport into test system

    I find  the following error messages whilre transporting into test system.
    DataSource 0EC_PCA_1 does not exist in source system of version A.
    Mapping between data source 0EC_PCA_1 and source system  is inconsistent.
    DataSource 0EC_PCA_1 does not exist in source system  of version A.
    Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
    any ideas please..........
    Enhanced the Extract structure and activated the data source in Source system
    Replicate the Data source in BI  and install the Infosource through BI Content  activated and transport them to Test system.

    Hi,
    1.First transport the data source from R/3 dev to R/3 quality
    2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you  data source may not appear)
    3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
      activate these info objects and collect in another request
    4.transport these info objects from BI dev to  BI quality
    5.transport entire data source to bw quality.
    Thanks,
    Tarun Brijwani.
    Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
    Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

  • OSS note is not working in production but works correctly in test system .

    hello friends ,
    weh have implemented one OSS notes , which is working corectly in Test system , but not working in production .
    Could you please let me know , what could be the reason ?
    OSS note no 1064273-
    Regards,
    Manoj

    Pls. check with Basis if the OSS note has been implemented properly and successfully.

  • For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

    For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
    We are getting below error.
    The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
    COuld anyone please help us to know, How it can be resolved?
    We also have this below error.
    System Response
    If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
    If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
    Procedure
    The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
    Procedure for System Administration
    Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
    Additional Information:
    System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
    No authorization to log on as a trusted system (Tr usted RC=0).
    /TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
    For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • Boot device not found - Please install an operating system on your hard disk

    Trying to boot up this morning gave this error message:
    "Boot device not found
    Please install an operating system on your hard disk
    Hard Disk <3F0>
    F2  System Diagnostics"
    Pressing F2 brings up to  the "HP PC Hardware Diagnostics UEFI" page, where its shown:
    "Version 1.6.0.0 - BIOS
    Fore more info please visit www. ... ...
    Memory Test
    Hard Drive Check
    Language
    Exit"
    Tryied the HD check but it says:
    "SMART Check : Not installed
    Short DST : Not installed
    More details:
    No bios upgrade was made, never, only a big updating of Windows yesterday.
    Could someone kindely help me out please?
    Thanks, Perry G.

    Hi,
              The above error message shows that the Hard disk drive is failed on your unit. You have to replace the Hard disk drive and reinstall the OS.
    To order parts click the below link
    https://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=FA59F7C7DCAC4237B498C91D0507A761
    To order Recovery disk click below link
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • Boot Device Not Found Please Intall an Operating system on your hard disk. Hard Disk - (3F0)

    Hello,
    I tried to re-install de OS from windows 7 to windows 8.1 and when the bios update driever was installed and the laptop was restaring it appeared the folowing window and message:
    Boot Device Not Found Please Intall an Operating system on your hard disk. Hard Disk - (3F0)
    After that i tried a lot of different ways to get to boot device select ...but i couldn't do anything. I removed the HDD and i put it back, i've tried with holding in the same time windows +B and pressing the power button in the same time for 1..2 seconds and then i've waited for at least 1 minute..and it didn't appeared anything on the screen. I've done the hard drive check and it passed. The weirdest thing is that when i want to select a boot device to re-install again the OS, i can't see any boot device to select. I need to mention that i've formatted the HDD in another computer. I dont care about the informations from the HDD beacause i saved all the informations on another device storage.
    Please help me repair this problem!!!  thanks a lot!
    Have a nice evening.!!!

    Whenever you get a message stating that the boot device not found it could be because of bad sectors on the Hard Drive. Its not necessary that the Hard Drive Test should fail to determine if the Hard Drive if its faulty or not. Sometimes even if the Hard Drive Test passes the Hard Drive will still not work because of the bad sectors in it.
    Best way to find out if its the Hard Drive you can try the Hard Deive on a different Notebook which would help you determine if it's faulty or not.
    Could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc..
    HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby
    Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive
    Please try the below shown troubleshooting steps once:
    Step 01. Remove the battery and unplug the AC/Power Adapter
    Step 02. Press and hold the Power button for more than 30 Seconds
    Step 03. Plug in the AC/Power Adapter (leave the Battery out for now)
    Step 04. Press the Power button and check if the Unit works normal
    If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook
    If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media)
    Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files.
    Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :
    http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf
    Please check your notebook warranty to verify the status and order a new Hard Disk Drive
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • My screen says boot device not found. Please install an operating system on hard drive,

    My screen says boot device not found. Please install an operating system on hard drive. What could have caused this problem? Help!!!!!

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook - see Here for a further explanation.
    2.  The full version of the operating system you are using ( ie Windows 7 32bit ).
    3.  Shut down the notebook.  Tap away at f10 as you start the notebook to enter the bios menu.  Under the Advanced or Diagnostic tab you should find the facility to run a test on the Hard Drive.  Post back with the details of any error messages.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)

    Hey
    i am having this Error Message "Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)", While UEFI mode is enabled from bois but in Raid menu Both my hard Drives 1TB and SSD are Showing and I run the  F2 System Diagnostics Test and it became as passed. In UEFI mode its not even showing my USB when i attach it for Window install But when i enabled the Leglacy mode it detteced my USB and also let me install my Windows and every thing seems to work fine. Updated the bios still Error is there.
    Error Message only shows up when I disable the Leglacy mode.
    So where is the Problem ? hard drive seems fine because these are working on Leglacy mode enabled.
    Laptop Model : HP Envy Dv6-7211tx
    Hard Drive : 1Tb and 32GB SSD

    Hi Saifullay, sorry to hear that you are having issue with your Envy Dv6-7211tx.  I have done some research and I have found a document that will assist you with this issues. Please click the link that I have provided to get to the document.   http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443463  
    If this does not resolve the issue, please feel free to write back . I would like to also apologize for the delay and the inconvenience that you have had to deal with.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Strange problem in report Execution in test system

    Hi,
    As something strange going on my program in test system.
    1) Executing the program in Development system using SE38->program name->F8. the program executes and display selection screen fraction of seconds.
    issue:
    When i am doing same process in TEST System(using SE38->program name->F8) the execution process is min 1 or 2 min , then i am gettign the Selection screen.
    I have checked other programs in TEST System but it doesnu2019t happen to any other programs on TEST system.
    Program functionality--
    i am using 2 table and MARA and Z table,  Using Selection screen i am extracting the data into output screen and excel download
    Dispaly
    1)if user select the Radio button output to screen in selection screen
    Display data into screen using some color formatted
    2)if user select the Radio button output to file in selection screen
    I am using OLE Automation Controller to get the Output excel download some color formatted data
    please let me know how to rsolve this type of isssue in Test system...
    plz respond when you find the time.
    Regards,
    AS
    Moderator Message: Urgency downgraded.
    Edited by: kishan P on Apr 13, 2011 11:59 AM

    Yes ..
    INITIALIZATION. Event  i have written code like free the objects ans clear Work Area and Refresh the Internal tables
    And
    *-to highlight the comments on selection-screen
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'RM1'.
          SCREEN-INTENSIFIED = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    Add entries to get the search help values
      PERFORM SEARCHELP_REGION.
      PERFORM SEARCHELP_COUNTRY.
    At selection screen event i am getting the search help for the region and country
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_REGN-LOW.
    *Search help for Region
      PERFORM SEARCHHELP_REGN_F4.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CTRY-LOW.
    *Search help for Country
       PERFORM SEARCHHELP_CTRY_F4.
    using FM :*FM for F4 help for returning the value to be displayed
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    Please let me know is it couse problem in TEST System....
    so how to resolve the issue...
    Regards,
    SR

  • Transfer to ECC fails in the SCM 7.0 testing system

    We  use only DP and are upgrading from SCM 5.0 to SCM 7.0. The planning book from where we transfer the Demand Plan to to ECC has a time bucket profile set up where it is maintained in months and the display is in weeks. The transfer to ECC happens in weekly buckets. Beacuse of this in the testing system for SCM 7.0 - the transfer fails as the system says that "Transfer to R/3 with mixed periodicites is not allowed".
    The transfer has worked fine in SCM 5.0 version for over 3 years. Any suggestions here will be greatly appreicated.
    Thanks,
    Sarita Doddi

    Hi Sarita,
    Please check the link below. It clearly states the data view used for the transfer process should have one periodicity only.
    A planning buckets profile with one periodicity only (if it contains more than one periodicity, the job is aborted with an error)
    http://help.sap.com/saphelp_scm70/helpdata/en/5f/176d4160168147e10000000a1550b0/frameset.htm
    If you need different aggregation levels for the transferred demand (e.g weekly for 2 months forllowed by monthly for 10 months), you may have to release the demand in 2 steps.
    Step 1: Release with a data view with only 2months in weekly buckets
    Step 2: release with a dataview month 3 to month 12 in monthly buckets.
    Regards
    Ashok

Maybe you are looking for