Url in responsive cs6 not working

Hell All
I have started a Responsive html page on my site in cs6 the code is
<script src="respond.min.js"></script>
</head>
<body>
<div class="gridContainer clearfix">
<div id="LayoutDiv1">
 
 <div id="Top">
 NEW SEASON<a href="http://francoisbouttier.co.uk/Marc_Cain_fashion_Francois_Bouttier_s/1853.htm">MARC CAIN</a> etc
When I view the page with f12 I see NEW SEASON<a href="http://francoisbouttier.co.uk/Marc_Cain_fashion_Francois_Bouttier_s/1853.htm">MARC CAIN</a> but no link or as it should appear.
I have the same code in a non responsive page and it works correctly.
Any ideas please?
Many Thanks
John

As Nancy suggests, have a look at http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.francoisbouttier.co.uk%2FMarc _Cain_fashion_Francois_Bouttie… and fix the 874 Errors and 45 warnings.
Then come back here if you still have a problem.

Similar Messages

Camera Raw CS6 not working properly

I have upagraded from Ps Cs5 to CS6.
I open a file in CR, and modify the exposition. After that, I modify the clarity: immediatly, the exposition goes back as it was before the modification ...
After the work on CR, I finish the file and go back to bridge: the image is not modified ! But if I dobble click on the same image in bridge, the file is opening in CR with the modifications: so this modifications are note visble on bridge ...
Some body can help me ?
I work with the last version of Br and Ps CS6.
Thanks,
Michel, [email protected]

Thanks a lot, Adriana, it is working ! You are right, it is the Nike plugins responsibility. Everything is OK now.
Salutations and many thanks from Guadeloupe, French West Indies
Michel GOGNY-GOUBERT
Le 4 mars 2014 à 17:42, adriana ohlmeyer <[email protected]> a écrit :
Re: Camera Raw CS6 not working properly
created by adriana ohlmeyer in Adobe Camera Raw - View the full discussion
If you have Nik plugins installed, please check reply # 8 on this thread:
http://forums.adobe.com/message/6045415#6045415
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6179192#6179192
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6179192#6179192
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6179192#6179192. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Camera Raw at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Response Groups not working

Hi there
My environment is a single Lync 2013 Front End Server installed on Server 2012.
It works since a year and now we want to use some response groups. I created 2 of them and everything seems fine but i cant call these groups. Not from internal and also not from external.
The clients shows an 500 internal server error with ID 26017.
So i traced the whole thing on the Front End Server. It seems the Response Group Service cant work with the local SQL Server. I see three error messages.
1. TL_ERROR(TF_COMPONENT) [2]0B90.37A8::07/23/2014-06:38:39.119.000002fb (RgsClientsLib,MatchMakingLocator.GetActiveInstanceFromDB:683.idx(479))
(0000000000150BA8)No instance registered as the active instance!
2. TL_ERROR(TF_COMPONENT) [1]1E08.2910::07/23/2014-06:38:42.462.00000a34 (RgsHostingFramework,CallControlManager.HandleAudioVideoCall:2049.idx(619))
(000000000362D054)Call is declined because Call Control is not started.
3. TL_WARN(TF_COMPONENT) [1]0B90.0B7C::07/23/2014-06:38:48.053.00000f2d (RgsClientsLib,MatchMakingLocator.GetActiveMatchMakingInstance:683.idx(301))
(0000000000150BA8)There is currently no active MatchMaking instance in the pool.
The Lync Server Event Log shows this error when the Response Group Service starts:
LS Response Group Service ID 31067
Lync Server 2013, Response Group Service Match Making could not find the Contact object used for subscribing to agents' presence.
Cause: The application has not been properly activated or the Contact object was deleted.
Resolution:
Deactivate and then activate the application for this pool.
Is there a way to reinstall / reconfigure the whole response group service incl. the active directory objects?
I hope somebody could help
Regards
Andreas

Have you seen this thread:
http://social.technet.microsoft.com/Forums/lync/en-US/cd25ddec-6e1e-4d58-9a9a-a530abfa82e3/response-groups-not-working?forum=ocsclients ?
He ran Get-CsApplicationEndpoint and received a warning that let him to a resolution.
Short of that, I'd rerun step 2 in the deployment wizard and restart services when you can to see if I could jog anything loose.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Help! Upgrade Fireworks CS5 (from Creative Suite 5 Web Premium) to Fireworks CS6 not working!

Today I bought and downloaded Fireworks CS6 from the Adobe webshop as an update for my Fireworks CS5 that was included in my Creative Suite 5 Web Premium-set.
But during the installation of Fireworks CS6 the serial number of my Creative Suite 5 Web Premium - needed for the installer to verify that I could 'legaly' upgrade - was not accepted! So now I can use Fireworks CS6 only as a try-out-version...
What can I do? If Creative Suite 5 Web Premium isn't the right upgrade-version: how can I get my money back? Or is there another solution?
Please help Adobe!
And thanks in advance,

Thanks for the reply. but how do I manually weed out the install entries in my registry? could you please guide me with the steps? This http://www.adobe.com/support/contact/cscleanertool.html is not working I am afraid. I understand that I need to uninstall the creative suite before I run CS cleaner. But as I explained in my first question, the uninstallation is not working at all. Even I could uninstall the software, I am afraid that I may get into trouble if installatin is not working. All I want is that my photoshop error " save for web devices " which was grayed out should work as normal. This error happened after I moved the plug-ins.
Thanks
Uthan

OAM 11g "Failure URL" in Authoriztion policy not working?

Hi,
Per the subject, I am running OAM server 11g (11.1.1.3), with an OAM 10g Apache webgate.
In the OAM Authorization policy (protected), I have specified a full URL for the "Failure URL", to get the browser to redirect when an authorization failure occurs.
However, when I test with a user that does not have access (user authenticates ok, but doesn't have right to access the protected resource), instead of the browser being redirected, I am getting an "Oracle Access Manager Operations Error" page.
I've been trying to figure this out, and have found several threads about this, e.g.:
OAM 11g authz redirect URL not working?
But, as I said, I am using OAM 11g server, and there is no "Inconclusive URL" in the policy settings (I guess there was in 10g, but not in 11g).
I have trace logging enabled on the OAM server, and I can clearly see that the request is getting "results DENY", but there's no indication in the logs that OAM server is aware of any failure redirection URL.
I've also got a header trace, and I can see that the browser is simply being re-directed to the "/oberr.cgi...." URL, so it' not going "somewhere else".
So, does anyone know why the "Failure URL" is not working in OAM 11g in Authorization policies?
Thanks,
Jim
P.S. The URL that it's suppose to be re-directing the browser to is in the Public resources under Authorization, and as I said, I don't see the browser even attempting to go to the failure URL, either via header traces or the OAM server logs.
Edited by: jimcpl on Nov 5, 2011 8:53 PM

Hi,
Per the subject, I am running OAM server 11g (11.1.1.3), with an OAM 10g Apache webgate.
In the OAM Authorization policy (protected), I have specified a full URL for the "Failure URL", to get the browser to redirect when an authorization failure occurs.
However, when I test with a user that does not have access (user authenticates ok, but doesn't have right to access the protected resource), instead of the browser being redirected, I am getting an "Oracle Access Manager Operations Error" page.
I've been trying to figure this out, and have found several threads about this, e.g.:
OAM 11g authz redirect URL not working?
But, as I said, I am using OAM 11g server, and there is no "Inconclusive URL" in the policy settings (I guess there was in 10g, but not in 11g).
I have trace logging enabled on the OAM server, and I can clearly see that the request is getting "results DENY", but there's no indication in the logs that OAM server is aware of any failure redirection URL.
I've also got a header trace, and I can see that the browser is simply being re-directed to the "/oberr.cgi...." URL, so it' not going "somewhere else".
So, does anyone know why the "Failure URL" is not working in OAM 11g in Authorization policies?
Thanks,
Jim
P.S. The URL that it's suppose to be re-directing the browser to is in the Public resources under Authorization, and as I said, I don't see the browser even attempting to go to the failure URL, either via header traces or the OAM server logs.
Edited by: jimcpl on Nov 5, 2011 8:53 PM

Media Encoder CS6 not working with Premiere

Hi
I have been merrily editing a lager job in Adobe Premiere CS6 and then queuing the time lines to export in media encoder CS6 done the entire job everything rendered fine then Bam all of a sudden when I try and render I get all the audio a couple of frames of video then just black!!
I have tried different codecs same result, I have tried different timelines same result, When I export directly out of Premiere without going through Media encoder all works fine, when I try encoding a file directly in media encoder works ok, It just seems to be the link between Premiere and Media encoder that not working as it should
Anyone got any ideas?
Hi Folks
Has no one had an issue exporting to Media encoder from Adobe Premiere CS6?

Any chance this gets fixed soon? I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio. I've also noticed the video jumps around even when it does have audio. Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually. I've also tried just dropping the file structure from the card straight to the hard drive. It's a huge problem, and is keeping me from making the switch fully from FCP 7.

Edit in Photoshop CS6 not working

I recently upgraded to lightroom 5 and CS6 and for some reason I can no longer us the "edit in CS6" option. Lightroom will go as far as to open photoshop, but won't open the image which I have set to open as an 8bit PSD sRGB. Any ideas?
Thanks in advance.

paul zimmerman wrote:
Sorry, what i meant by user accounts is this.
On my Imac, i've created 2 user accounts. User A and User B. when I log in as User A and use lightroom and CS6 everything works fine. When I log in as User B, I have the issue with lightroom not opening raws in photoshop. Both users are using the system applications.
Ah, OK so I assume the admin account works, the other doesn't? Have to say I'm not savvy enough to understand what Photoshop/LR need in terms of items in the main account to make this all work. I might have to try that test on this end as I have two accounts too. I use the 2nd for trouble shooting. I suspect the primary account has something, somewhere in the user Library installed by Adobe that is accessed where it might not be in account #2.
If one account works, the other doesn't, we have to pinpoint what files are missing from the account that doesn't work.

Premiere Pro/Prelude CS6 not working with AVCHD from Canon HF G10

I just tried switching from Final Cut Pro 7/X to Adobe Premiere Pro CS6 and have not been able to get Premiere Pro or Prelude to work with AVCHD footage from my Canon HF G10. The system runs Mac OS X 10.7.4 on a 3.4 GHz quad-core iMac with 16GB of RAM and 10Gbit/s Thunderbolt RAID for video storage. Adobe Updater ran yesterday and installed CSXS infrastructure updates which did not fix the problems.
After importing several short (less than 5 minutes each) 1080p30 clips into Premiere Pro, I can scrub over the first few seconds of a clip but afterwards it stalls or mixes in frames from the beginning of the clip. Rendering 30 seconds of video does not complete in reasonable time, i.e. takes more than 5 minutes. I figured I would try ingest the footage with Prelude and am running into the same problems. Scrubbing does not work, only the first few seconds from a clip are available. When configuring Prelude to transcode on ingest, I am getting "Import XMP failed" errors. I already spent several hours trying to figure this out. In the meantime, I finished the project using Final Cut Pro X :-\
Any help would be appreciated.
Thank you,
Niels.

Any chance this gets fixed soon? I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio. I've also noticed the video jumps around even when it does have audio. Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually. I've also tried just dropping the file structure from the card straight to the hard drive. It's a huge problem, and is keeping me from making the switch fully from FCP 7.

Response.Redirect not working after printing CR

Using Visual Studio 2010 sp1 with Crystal for VS 2010. Web app running as a web application in x86 mode using .NET 4.0 framework.
I recently created a CR with a sub-report and it previews and prints just fine. However, after I PRINT the report, my code behind in the ASPX file is not recognized and thus fails.
For example, I created a 'Back' button to redirect the CR aspx back to the calling aspx file and it works just fine if I only view the report. If I click on the printer icon located on the report viewer toolbar, the button stops working. In fact, none of the code behind syntax is recognized and the aspx file just does a page_load.
I know this code works because it does work if I DON"T print the report:
    protected void btnBack_Click(object sender, EventArgs e)
        Response.Redirect("~/NewCase.aspx");
I also have a 'Submit' button that changes the data parameters for the report and it works great but after I print the report, it will not work either.   (I've tried to upgrade to sp2 but I get an error with the installation process... so still trying to figure that out.)
    protected void btnSubmit_Click(object sender, EventArgs e)
        CrystalReportViewer1.RefreshReport();
To summarize, All the code I listed works fine if I do not try to print the report and just view it. After I click the printer icon, the code stops being recognized and the aspx page just refreshes.
I've searched for help on the web for a couple of days to no avail; so I am thinking it must be some issue with the report viewer.
Any help would be greatly appreciated.
Paul

Not a problem. Something like what is described in the following should help (from the easiest to the more complicated):
[1411677 - Blank first page in Visual Studio .NET application using the Crystal Reports DHTML viewer|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433313331333633373337%7D.do]
[1625033 - Page navigation button does not work as required using Crystal Report .NET web application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633323335333033333333%7D.do]
[1670041 - How to persist Crystal Reports using Cache in a custom .NET web application?|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633373330333033343331%7D.do]
- Ludek

Click to URL on RSS text not working on node variable.

Hi.
I have a RSS feed parsed into one text box and am using imported CSS to format the text in one Textfield that was created with as3.
Problem is my roll over and click handler functions for making each text variable a link to the XML URL link will not work unless I point the function at the entire text field. I just want the individual text variables made from the RSS Title nodes, to be set to react to my handleFHTClicked, rollOutHandler and rollOverHandler functions. The movie runs Ok parsing the nodes and picking up the CSS, but I get this error in the output window when it reaches the aformentioned functions...
TypeError: Error #1006: value is not a function.
 at AS3_CSS_external_file2_fla::MainTimeline/onLoaded()
 at flash.events::EventDispatcher/dispatchEventFunction()
 at flash.events::EventDispatcher/dispatchEvent()
 at flash.net::URLLoader/onComplete()
Here is the code....
var cssLoader:URLLoader;
//load the fake preloader
var preLoader = new loading_mc();
preLoader.x = 170;
preLoader.y = 50;
preLoader.scaleX = .7;
preLoader.scaleY = .7;
addChild(preLoader);
//This code loads and Parses the RSS feed
var loader:URLLoader = new URLLoader();
loader.addEventListener(Event.COMPLETE, onLoaded);
var dotExtension:String = "...";
var maxLength:Number = 0;
var xml:XML;
function onLoaded(e:Event):void {
 removeChild(preLoader);
 xml = new XML(e.target.data);
 var firstheadtext = xml.channel.item[0].title;
 var firstbodytext = xml.channel.item[0].description;
 var secondheadtext = xml.channel.item[1].title;
 trace(firstheadtext);
 trace(firstbodytext);
 trace(secondheadtext);
 //dtfa.htmlText = ""+firstheadtext+""+""+ ""+firstbodytext+"";
 var myText:String = ""+firstheadtext+""
 +""+firstbodytext+" "
 +" "
 +"______________________________________________________________________________ "
 +" "
 +""+secondheadtext+" ";
 function cssLoadComplete(event:Event):void {
 var sheet:StyleSheet = new StyleSheet();
 sheet.parseCSS(cssLoader.data);
 myTextField.styleSheet=sheet;
 myTextField.htmlText=myText;
 var myTextField:TextField = new TextField();
 myTextField.width = 500;
 myTextField.height = 240;
 myTextField.multiline = true;
 myTextField.wordWrap = true;
 addChild(myTextField);
 var req:URLRequest = new URLRequest("myStyleSheet.css");
 cssLoader = new URLLoader();
 cssLoader.addEventListener(Event.COMPLETE, cssLoadComplete);
 cssLoader.load(req);
 //This code handels the click through
 firstheadtext.addEventListener(MouseEvent.CLICK, handleFHTClicked);
 function handleFHTClicked(e:MouseEvent):void {
 navigateToURL(new URLRequest(xml.channel.item[0].link));
 firstheadtext.addEventListener(MouseEvent.MOUSE_OVER , rollOverHandler);
 firstheadtext.addEventListener(MouseEvent.MOUSE_OUT, rollOutHandler);
 import flash.text.TextFormat;
 // create the text format objects
 var overTextFormat:TextFormat = new TextFormat();
 overTextFormat.underline = true;
 var defaultTextFormat:TextFormat = new TextFormat();
 defaultTextFormat.underline = false;
 // add the event handlers
 function rollOverHandler(e:MouseEvent):void
 TextField(e.target).setTextFormat(overTextFormat);
 function rollOutHandler(e:MouseEvent):void
 TextField(e.target).setTextFormat(defaultTextFormat);
loader.load(new URLRequest("http://www.calgaryheraldonline.com/rss_echo.php"));
Any assistance would be appreciated.
Cheers
Forrest

If I un-nest the functions from the RSS loader, I get many more errors.
Here is my un-nested code;
import flash.text.TextFormat;
var cssLoader:URLLoader;
//load the fake preloader
var preLoader = new loading_mc();
preLoader.x = 170;
preLoader.y = 50;
preLoader.scaleX = .7;
preLoader.scaleY = .7;
addChild(preLoader);
//This code loads and Parses the RSS feed
var loader:URLLoader = new URLLoader();
loader.addEventListener(Event.COMPLETE, onLoaded);
var xml:XML;
function onLoaded(e:Event):void {
 removeChild(preLoader);
 xml = new XML(e.target.data);
 var firstheadtext = xml.channel.item[0].title;
 var firstbodytext = xml.channel.item[0].description;
 var secondheadtext = xml.channel.item[1].title;
 trace(firstheadtext);
 trace(firstbodytext);
 trace(secondheadtext);
 //dtfa.htmlText = ""+firstheadtext+""+""+ ""+firstbodytext+"";
 var myText:String = ""+firstheadtext+""
 +""+firstbodytext+" "
 +" "
 +"______________________________________________________________________________ "
 +" "
 +""+secondheadtext+" ";
function handleFHTClicked(e:MouseEvent):void {
 navigateToURL(new URLRequest(xml.channel.item[0].link));
firstheadtext.addEventListener(MouseEvent.MOUSE_OVER , rollOverHandler);
firstheadtext.addEventListener(MouseEvent.MOUSE_OUT, rollOutHandler);
// create the text format objects
var overTextFormat:TextFormat = new TextFormat();
overTextFormat.underline = true;
var defaultTextFormat:TextFormat = new TextFormat();
defaultTextFormat.underline = false;
//This code handels the click through
firstheadtext.addEventListener(MouseEvent.CLICK, handleFHTClicked);
// add the event handlers
// you only need these two functions
function rollOverHandler(e:MouseEvent):void {
 TextField(e.target).setTextFormat(overTextFormat);
function rollOutHandler(e:MouseEvent):void {
 TextField(e.target).setTextFormat(defaultTextFormat);
function cssLoadComplete(event:Event):void {
 var sheet:StyleSheet = new StyleSheet();
 sheet.parseCSS(cssLoader.data);
 myTextField.styleSheet=sheet;
 myTextField.htmlText=myText;
var myTextField:TextField = new TextField();
myTextField.width = 500;
myTextField.height = 240;
myTextField.multiline = true;
myTextField.wordWrap = true;
addChild(myTextField);
var req:URLRequest = new URLRequest("myStyleSheet.css");
cssLoader = new URLLoader();
cssLoader.addEventListener(Event.COMPLETE, cssLoadComplete);
cssLoader.load(req);
loader.load(new URLRequest("http://www.calgaryheraldonline.com/rss_echo.php"));
And now the errors are telling me it cannot access the undefined property of myText and firstheadtext.
I just don't understand what needs to be inside the onLoaded function and what has to be outside.

URL redirect over is not working..

Redirecting URL appended with querystring parameters for community is not working on SSO? We have SSO set up using Intergrated Windows Authetication.
When I launch new browser and request portal over SSO , works. Then I go to a community and copy the URL from browser. When I open new window and paste the URL extracting UserID from it, it gives me login screen and sso won't work.
If I do the same action twice in same window(for which I got the login screen firsttime), it works second time. How can I resolve this? Is anybody had this problem before?
Thanks!!
Sanjay

CaptureDeviceInfo di=null;
               Vector deviceList = CaptureDeviceManager.getDeviceList(new VideoFormat(VideoFormat.RGB));
               if (deviceList.size() > 0)
                         di = (CaptureDeviceInfo)deviceList.elementAt(0);
                         if(di==null) System.exit(-1);
                              System.out.println("devicelist2");
                    else
                         System.out.println("exit");
                         System.exit(-1);
               MediaLocator mediaURL = di.getLocator();
create medialocator by using datasouce object's mehtod getLocator();
anoop

Response.Redirect not working with parameters

Response.Redirect("http://myurl/php/test.php?username=" + LoginHelper.userName + "&password=" + LoginHelper.password);
Hi All,
I am trying to redirect the user to different website with username and password. I am using the code above and passing user name and password as parameters.
This works fine on IE when i run the code on my local machine.
But when I push the code live this does not work, and user is not able to login.
It is working fine on other browsers.
Can someone please help, i am trying to wrap my head around this.
Any help would be much appreciated. Thanks in advance.

Hi SA260884,
Do you use Response.Redirect function in a asp web application? If yes, please check this sample:
https://support.microsoft.com/en-us/kb/307903?wa=wsignin1.0
If not, please make a sample html for reproducing this issue.
Best regards,
Shu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Response.redirect not working on IE when it is live but works fine on local.

Response.Redirect("http://myurl/php/test.php?username="
+ LoginHelper.userName
+ "&password="
+ LoginHelper.password);
Hi All,
I am trying to redirect the user to different website with username and password. I am using the code above and passing user name and password as parameters.
This works fine on IE when i run the code on my local machine.
But when I push the code live this does not work, and user is not able to login.
It is working fine for other browsers.
Can someone please help, i am trying to wrap my head around this.
Any help would be much appreciated. Thanks in advance.

This is a problem specific to ASP.NET 4.0. I would either recommend upgrading to .NET 4.5 if possible, otherwise I believe you might have to create a custom browser definition. There is a bug in .Net 4.0 for browser detection.

Adobe Lightroom 4 edit in PS CS6 not working

When I try to edit in from within Lightroom 4, the system returns the following error: Some of the application components are missing from the Application directory, Please reinstall the application.
I am working on an iMAC
I have reinstalled PS CS6 and Lightroom 4
I have tried it with Lightroom 2 and it works fine
Please help

paul zimmerman wrote:
Sorry, what i meant by user accounts is this.
On my Imac, i've created 2 user accounts. User A and User B. when I log in as User A and use lightroom and CS6 everything works fine. When I log in as User B, I have the issue with lightroom not opening raws in photoshop. Both users are using the system applications.
Ah, OK so I assume the admin account works, the other doesn't? Have to say I'm not savvy enough to understand what Photoshop/LR need in terms of items in the main account to make this all work. I might have to try that test on this end as I have two accounts too. I use the 2nd for trouble shooting. I suspect the primary account has something, somewhere in the user Library installed by Adobe that is accessed where it might not be in account #2.
If one account works, the other doesn't, we have to pinpoint what files are missing from the account that doesn't work.

Search Google from the URL bar in safari not working, Help...

Hi to everyone,
im stuck here trying to find out why i can't search more in the url bar in safari. Just happened few weeks ago and i most use bing or yahoo.
I did try to delete cache and plist etc, everything i read in the net but still not working. I have mac pro 2011, and I'm not sure but i think this happened after i open a second account for my girlfriend in my mac, so she can have her own account. I check and in the other account happen the same...some ideas?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Url in responsive cs6 not working

Similar Messages

Maybe you are looking for