Usage Logs or Reports for HFM 4.x

Does 4.x have any logs or reports that show usage, i.e. which users have accessed which objects?

Hi,
You can use only: Administration - Users on System (User, Current Module, Current Activit, etc. columns).
Regards,
Marcin

Similar Messages

Usage Logs or Reports for Planning 7.x

Does Planning 7.x have any logs or reports that show usage, i.e. which users have accessed which objects (reports, business rules, etc.)?

Hello,
I assume you mean Planning 4.x which worked with Essbase 7.x
There is an auditing feature you can enable in Planning which logs many actions to your planning relational store -- this is under the Administration menu in Planning. There is no interface to the table so it's not the easiest mechanism to use in some corporate environments -- if you have interactive reports available there is a template available to access the audit table.
There is also the hbrules.log which logs the start/end time of business rules as well as the prompt settings.
If you are looking for object modifications then you can find the rule creator and who updated it last in EAS.
Regards,
-John

Shared Services User Reports - for HFM Users

Does anyone have some good material or knowledge they can share with me today regarding the following Shared Services topics?
1. What might cause a run of the Users By Group report to fail? After about 15 mins bombs out and receive the following error: "User not found with identity = ntlm:SID=S-1-5-21-787380144-986785343-375376054-10174?USER(-2147216700). Then gives much more detail on error.
2. How to remove users that appear under admin role but not in default?
3. For audit (TODAY), ideally should produce a report of HFM users – including dates (when added, when security /provisioning was changed for them) – is there a report or combo of reports that will provide this information?
Any help or a point in the right direction is hugely appreciated.
Thank you!

Ok - just some pointers, so use as suits.
1: this looks like it is not seeing your AD/NTLM user. You see a similar SID if in Properties of any file share where the connection to the domain is not available, or the user no longer exists. Remember, if a user ID in NTLM or AD has been changed, Shared Services does not recognise this, and stores the original SID, so you need to remove and reprovision the user.
2. The cleanest INHO is to do a CSS Import/Export and 'clean' the file. RTFM :)
3. There are some reports in Shared Services, but see if this is of use - especially the Security Matrix, (http://www.epmmaestro.com/dnn/Products/EPMWebSymphony/tabid/56/Default.aspx)
Good luck

Extract Usage Report for audit purpose

Hi All,
I want to extract system usage report for SAP eSourcing system ..
for example:
names of all of the individuals who have logged into the system within a particular timeframe...
thanks in advance...

Hi Andrzej
USR02 will not capture situations whereby a user was created and then deleted within the time frame
SUIM user change documents would capture user creation in a system.
Regards
Colleen

Hyperion Financial Reporting Studio - usage log and exporting criteria

Hello, is there a way to run a usage log for the reports that we have in Financial Reporting Studio?
In addition, can I export the report criterias? I'm looking at potentially archiving some reports we have out on the server that is not currently being used. Thanks much!!!

The FRReportSrv log file under Hyperion\logs\BIPlus gives you the report usage tracking. I am not the developer of our process and I am not techie at all, but we have a process that scans the log files, parses the log files and load it into Oracle. Then thru Oracle Apex, we develop reports to track FR usage.
I am not sure what you mean by report criterias. Do you mean, for example, if the report is not used for over 5 months, you would like to archive it? If you can create a similar report like the one I described above, then yes, it would help you to determine the idle reports, but I am not sure if you can automatically archive the reports. I think it would have to be manual, where you would use the export function on Workspace to archive your report.
Hope this helps.
Cheers,
Mehmet

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

Report for time log on detail for each employees in SAP ABAP-HR report

hi experts,
      please help me .how to create a report for time log on detail for each employees in SAP ABAP-HR report.please help me.
                                                  thank you

Hi,
For Time Management Infotypes , If you want to read the data using macro you need to use the Macro called RP_READ_ALL_TIME_ITY
Example:
DATA: BEGDA LIKE P2001-BEGDA, ENDDA LIKE P2001-ENDDA.
   INFOTYPES: 0000, 0001, 0002, ...
                     2001 MODE N, 2002 MODE N, ...
     GET PERNR.
   BEGDA = '19900101'. ENDDA = '19900131'.
   RP_READ_ALL_TIME_ITY BEGDA ENDDA.
   IF PNP-SW-AUTH-SKIPPED-RECORD NE '0'.
      WRITE: / 'Authorization for time data missing'.
      WRITE: / 'for personnel number', PERNR-PERNR. REJECT.
   ENDIF.

Usage Report for 2007-04-08

We never received a usage report for the week of 2007-04-08. I checked our site preferences and the email address was not been changed. Did this report not get sent out or did we (odu.edu) just not receive it?

Sorry for the delay, but we have identified the issue with this week's report and have began sending them out to site admins this afternoon. Please check your inbox in an hour or so.
Mac OS X (10.4.6)

Usage Report for SSM 7.0

Usage Report for SSM 7.0
We need to track the usage of SSM by our users and report the number of logins.
I believe there is a trace file that is produced somewhere in SSM.
Can anyone suggest the best method to produce a 'Usage Report' based on a trace file or something simliar?
Regards
David

Rohini,
The direct answer for this question is to look into some web analytic tools. Basically, you tag each page with hyperlink markup language that the web analytic tools tracks.
A typical web analytic tool can show you which pages were visited (and which weren't), who came in to look and how long they stayed - usually for tracking outside users you are just getting IP addresses, but with tracking internal folks you will be able to set it up to track them. Also they include things like typical user paths - where did they land and then where did they go.
This is something you would work with using the analytic tool you selected. Web analytics is a whole discipline onto itself and so you shouldn't have any problems finding consultants to set up whatever software you want to use. My experience, from long ago, was that these are tools have many out of the box features that make it easy to set up.
Most web analytic tools are set up for customers/consumers/visitors and used by marketing or web designers. When you look at employees as your customers/visitors, there isn't a whole lot of difference in setting up a tool to track that kind of usage.
As I said before, I don't have any recommendation to provide about which tool would exactly meet your need, many come with a variety of options, plans, and pricing.
Good luck,
Bob

SCCM 2012 usage report for remote users

Hi,
Can someone help to get the SCCM usage report for all remote users who accessed particular application remotely on windows 7 workstation
Regards,
Madhan

If the application is something and executable that the users have to start, you can use Software Metering.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Report for workflow log....

Hi Experts,
I have to create a ABAP report for workflow log. which will take workflow number and object key and date range as inputs and gives all the dialog steps , Actual agent , execution date etc.....
Please help me in doing it......
Regards,
Devananda A J

Hi Dev,
Check these tables -> SWWWIHEAD, SWW_WI2OBJ & SWWLOGHIST.
You will get all the relevant data from these tables.
Thanks,
Debi

Training manuals for HFM, Planning, and Reporting & Analysis

Does anyone have or know where I can get copies of Hyperion 9.3 training manuals for HFM, Planning, Reporting & Analysis, and Financial Reporting? I want to review and practise them inorder to be able to train others.
Mike

they are really not worth it. You'd better serve your people by reading the user manuals (available on machines that have the programs installed in C:Hyperion or from Help) and practicing.

Web report for Sentinel Log Manager (or possilby RD)

Hi all,
My customer wants to replace Webtrend. So customers are given me a set
of
apache log files. They said based on those logs Webtrend could already
build
some useful web based report for their business units. From what I have
known,
what makes them useful are:
1) Those IP addresses could be resolved to domain, identifying the
source of
the browsers
2) URL are analyzed such that they could give a 'hit rate' based web
report for
trend analysis.
3) What browsers are used to view their web sites so they know the
compatibility
issues.
If I customize our report now, would it be possible to generate similar
reports for the above items?
1) I wonder if it is possible during the report generate, would some
other add-on java plug-in could work for the DNS resolution before data
generation?
2) Any one know the logic of the webtrend about how it correlates
various URL visited in the apache logs are considered different 'hit'?
3) I believe we could base on filter to identify different version of
the browsers used?
I don't have a webtrend so I could not compare and look at how they
generate reports from the apache log I have. Please let me know if
anyone has any idea about it.
Thanks,
Geoffrey
geocheng
geocheng's Profile: http://forums.novell.com/member.php?userid=90913
View this thread: http://forums.novell.com/showthread.php?t=425354

Hi geocheng,
For (1): this feature already exists, although it's in a somewhat
experimental state. You need to install the Generic Hostname Resolution
Service Collector, and then enable hostname resolution for each
Collector (in this case, the Apache Collector).
For (2): I'm not sure what a "hit rate" is, but the Apache Collector
should give you a list of URLs that were visited and you should be able
to calculate counts per URL (split across the TargetDataName and
TargetDataContainer, note) using a SQL query or whatever.
For (3): I don't actually know what, if anything, the Apache Collector
does with the browser details; it may put that into the
ExtendedInformation field. You may wish to customize the Collector
slightly (this should be pretty easy to do) to copy that specific data
into a separate CV field; if you do that, then calculating the relative
frequency of hits from different browser types will again be a simple
COUNT style SQL query.
This is an interesting use case - we haven't really built much content
around the Apache Collector but as you are indicating, there might be
some simple things we can do that would be pretty useful. I'll take it
up as a potential project...
DCorlette
DCorlette's Profile: http://forums.novell.com/member.php?userid=4437
View this thread: http://forums.novell.com/showthread.php?t=425354

Announcing new activity logging and reporting capabilities for Office 365

Announcing new activity logging and reporting capabilities for Office 365We are pleased to announce the rollout of new activity logging and reporting capabilities for Office 365, including the Office 365 activity report, comprehensive logging capability, PowerShell command or cmdlet and a preview of the Office 365 Management Activity API.Thisnew capability provides you increased transparency, allowing you to monitor and investigate actions taken on your data, and comply with laws and regulations.Office 365 activity reportThe Office 365 activity report enables you to investigate a user’s activity by searching for a user, file or other resource across SharePoint Online, One Drive for Business, Exchange Online and Azure Active Directory, and then download the activities to a CSV (comma separate values) file. You can filter by date range,...
This topic first appeared in the Spiceworks Community

Hi,
Do you have any specific questions? We'll certainly try to help you, but we won't do your homework for you. That wouldn't help you learn at all.
I recommend looking over the learning materials here, they're quite good for getting started with PowerShell:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Reports :: can I download usage reports for more t...

Good morning Skypeland,
My Skype Manger accounts has a number of members and I need to download usage reports each month for those members. We will add members on a monthly basis which means the member list will grow and downloading reports could become a lengthy process.
Is there any way to download the reports for all members at the same time?
Kind regards

Did you get an answer to this?
I have over 3000 users and want ot get a basic usage report totals for different months.
Would be good if the report had more details included!

Usage Logs or Reports for HFM 4.x

Similar Messages

Maybe you are looking for