USB 3.0 support in Windows 7?

I can't find any official information online about what support Windows 7 has for USB 3.0, can someone point me in the right direction?

I can say categorically that USB 3.0 support for Windows 7 seems to be a little like the eSATA problems experienced by people... A washout.....
I have Windows 7 professional SP1 with ASUS p6t deluxe X58 chipset... USB 3.0 with the drivers (at least) from Buffalo are highly unreliable and not worth investigating or buying....
Until the drivers have clear standards there will remain these motherboard chipset incompatibilities like with the X58 chipset. I have a 3.0 USB Buffalo Controller that whose driver seems to be VERY BUGGY....
a. external connected loses connection with the mobo
b. throughput is ABSOLUTELY PITIFUL as many have said at a miserable 23-28 Mb/Second (this is what we waited for????)....
c. the drivers on the controller card...that it seems to fail at will where a navigational-"ghost" of the attached drive's directory is frozen (i.e. not refreshed by windows explorer) and consequently the ONLY thing that remedies is a re-boot UNTIL....
....it fails again. Not, repeat, not a happy camper. I would have gladly waited until the drivers had been cleaned and ready for RTM status not this pre-alpha/alpha nonsense that the poor unsuspecting early-adopter geek community is having
to suffer through.................GROWWWWWWL.......... It is a bit sad really....the first real blemish on what has been an otherwise stellar O/S release.... So dammit...................FIX/STANDARDIZE THE DRIVERs... There...I tried...to
say it nicely.
It's alway interesting hearing from experts that know everything.
I have two system with USB 3.0 on the motherboard and my transfer rates usually run between about 60-90 Mb/secs.
And, Microsoft does not write the USB 3.0 driver - it is written by NEC or one of the other hardware partners! My guess is your problem is caused by the Bufflao hardware and their implementation of USB 3.0. It's definitely has nothing
to do with Microsoft! Talk to the USB 3.0 committee @
http://www.usb.org/developers/ssusb
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

No USB 2.0 support in Windows Virtual PC for B85-G41 PC MATE?

When I try to attach any USB device in Virtual PC (to USB 2.0 ports) I get the following error message "Could not attach the USB device. you can attach the USB device to a different USB port or restart the VM and try again".Win7 Ent 64bit OS is installed on host machine with all the latest drivers and BIOS for this motherboard.Win7 Ent 32bit OS is installed on the guest machine with Integration Components enabled.USB devices work perfectly on host machine.

check this link with the same issue:
https://social.technet.microsoft.com/Forums/windows/en-US/2178e78e-4f2d-421d-a4d5-4f1416de616b/could-not-attach-the-usb-device-you-can-attach-the-usb-device-to-a-different-usb-port-or-restart?forum=w7itprovirt

Java usb support for windows

Hello All
I do no know if this is the right place to post this topic, but does anyone know of an api that provides usb support for windows. I was looking a jusb, but the documentation says it only has support for linux. So far the best I have found is Mr Stahl's thesis which provides very limited support for windows. I was wondering if there was anything more stable (free or not)
Thanks

Hi,
Im trying to connect 2 computers using USB or Parallell port. On one computer I want to install a printer (regular windows printer) that prints through either USB or the Parallell port. On the other computer I want to listen on the Parallell port/USB port and receive the input and write it to a file.
Does anyone have a some sample code to do this? I've tried the following code (rxtx) but it cant find more than 2 ports (one parallel and one serial - no USBs even though I have 5 USB ports). Since I could only find the USB I tried to listen on the Parallell port. Problem is that I dont receive any data.
<---THE CODE--->
Enumeration port_list = gnu.io.CommPortIdentifier.getPortIdentifiers();
while (port_list.hasMoreElements ()) {
CommPortIdentifier port_id = (CommPortIdentifier)port_list.nextElement ();
          if(port_id.getPortType () == CommPortIdentifier.PORT_PARALLEL) {
               System.out.println("Found port "+port_id.getName()+ "id "+port_id);
               CommPort commPort = port_id.open("",2000);
               InputStream is = commPort.getInputStream();
               byte buffert[]=new byte[1024];
          int len;
          System.out.println(">>>>>>>>len "+is.read(buffert));
          while((len=is.read(buffert))==-1)
               Thread.sleep(500);
               is = commPort.getInputStream();
               System.out.println(">>>>>>>>len "+len);
}

Adobe AIR support for Windows RT and USB

We want to develop an cross platform application. We found that Adobe AIR supports cross platform development for Windows, iOS and Android.
We wanted to know wheather
1) reading and writing to USB port is possible with Adobe AIR?
2) Adobe AIR has support for Windows RT development?
Thanks in advance.

I wrote before about my concerns with Adobe AIR, but here is a short summary:
- no road map and no clear plans for the platform,
- support of new devices is often late, Intel chipsets are not supported on Android,
- debugging on a device is a pain,
- inadequate build times for iOS, app package is quite large,
- list of mobile UI components is very limited and UI experience is far from native,
- native extensions are a possibility but still far from perfect (imagine using three very different development platforms all in one app), no debugging,
- performance is not good if you use a lot of Spark components in your app,
- Flash Builder is pretty bad as the development environment,
- ActionScript3 is a poor, outdated language that encourages bad coding practices.
I ruled out HTML5 frameworks for the same reason as you stated above. Last few months I've been working with Xamarin MonoTouch and I think it is perfect for my projects. 100% native UI experience, about 80% of the code is shared among the platforms, iOS, MacOSX, Android and Windows 8/RT are supported. Took me about 2 months to convert my 2Mb ActionScript Adobe AIR project to Xamarin MonoTouch (iOS). The entire process was fun and painless. Now thinking to port to MacOSX and Android. My iOS app is already at the App Store, no major complains so far.
On a down side, Xamarin is expensive for an indie developer with low revenues. You need to pay $300 per year per each platform (iOS, Android, Mac). Plus, you need to develop UI layer separately for each platform, so only part of the code is shared. But I decided it is a way to go for my projects and it's been a very positive experience so far.
As for my professional development, Xamarin offers quite a bit more as well. I get to work with C#, .NET, iOS SDK, Android SDK all in one platform. With Adobe tools you only get to know ActionScript and Flex/Spark framework. Very rarely I see that as a desired qualification. It is like a trap. Your boss tells you to develop a few projects with Adobe tools, it sucks you in for a few years and suddenly you realize that your market value declined dramatically and there is no easy way out of this mess.

Prepare an usb thumb drive, to boot windows 7 or 8 in UEFI mode

Purpose of this post:
Prepare an usb thumb drive, to boot windows 7 in UEFI mode and install the system in pure UEFI mode.
Why am I writing this:
I had a hard time finding out how to make a custom installation of windows 7 in pure UEFI mode, and avoid using the factory restore disks. After hours of research, experiments etc I finally got the point and found a solution. And I'm happy to share my research with you. I hope this will be of help. If something is not clear, or more information is needed, I will be glad to explain things further.
History:
As most of you already know, BIOS was developed for PC in early eighties and has remained unchanged in recent years. But, since 2000, Intel started working on a new firmware interface, called Extensible Firmware Interface, abbreviated EFI. And since 2005 United EFI Forum has been handling the responsibility for development, management and promotion of UEFI specifications. Bigger companies like Intel, AMD, Microsoft and Dell have already started to bring out their products in accordance to UEFI standards which has more stable, secure and easier to use interface.
How does UEFI works (in a nutshell):
Once you power on the UEFI based PC, the Pre-EFI is executed which initializes only the CPU, memory and the chipset. This followed by Driver Execution Environment (DEX) where other hardware is initialized.
Advantages of UEFI:
    It can integrate various drivers this will not require to load during booting so saves time.
   PC can connect to network without OS.
   Also integrated drivers allow rendering GUI based control panel which out dates the old school bluish BIOS screen.
   Not all the installed hard drives are scanned as boot drive is set during the installation of OS in UFFI.
   Applications like anti-virus and diagnostic tools can be stored on virtually any non-volatile storage devices attached to a PC.
For a system to boot and install in UEFI the partition table of the HDD should be GPT (GUID Partition Table), not the old school MBR (master boot record). GPT has many advantages, can have virtually an unlimited number of partitions (windows will allow only 128) and impressively big partitions.
Since UEFI has a lot of advantages why not having a system install and boot in UEFI mode? AFAIK new Lenovo notebooks/netbooks are UEFI capable and OS’s are already installed in pure UEFI mode.
So, let’s go now to the point. Do you want to have more control over your HDD? Let say, you have a 320GB HDD and you have divided it in two partitions, one of 50GB, for your Windows 7, and the remaining for your data. If something goes wrong and you need to restore your system to factory default, with the recovery disks, it will wipe your partition scheme, set the system to default and this way your data will be lost.
You may want to make a “vanilla” installation of windows from a USB thumb drive and avoid using factory recovery disks. Now here things get complicated. A standard preparation of the USB with Microsoft’s software (Windows 7 USB/DVD Download Tool), or other tools, will give you a bios installation, not a UEFI one. So for the system to boot, you will need to change some settings in bios, and changing it from UEFI to legacy bios. The installation will prepare the HDD in MBR partition table, and you will lose all the advantages of UEFI, described above.
Now this can be avoided, by properly preparing an USB to boot and install in UEFI mode. Here are the steps:
Step by step tutorial:
1.   In a windows computer, download a legal copy (although trial) of the windows 7 os. You can do this from here: http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Be sure to download the same version that came preinstalled in your computer. For example, if you have a Lenovo x120e, with a Windows 7 professional, 64bit, download an iso image of the Windows 7 professional 64bit.
2.   Once downloaded burn the iso to a USB thumb (at least 4GB) using Windows 7 USB/DVD Download Tool.
3.   After preparing this, create a folder on your computer, name it whatever (i.e. W7pro64bit). Go to the root of your USB
and select all the files and folders there (9 in total) copy, and paste to your folder you created, W7pro64bit.
4.   Using windows format the usb again in FAT32. Windows 7 USB/DVD Download tool, formats it in NTFS. We need a FAT32 formatted disk to achieve our goal. Formating again the USB in FAT32 will not touch the MBR of the USB thumbdrive. And after copying back the files (see step 6) the USB will still be bootable. (nice, and simple, isn't it?)
5.   Now go to the folder W7pro64bit and do the following:
a.   Browse to W7pro64bit\sources\ and open install.wim file. It’s a big file, and can be opened as an archive with 7zip (free software). Do not extract it, do not modify it, just browse the file with 7zip. Just to be sure you do not mess with that file, you can copy it somewhere else in your computer, and than procede.
b.   Browse this file (install.wim) to \1\Windows\Boot\EFI\ and locate the file bootmgfw.efi. Do not move, delete it, but just drag that file to the desktop. (if you have copied the file install.wim to another place in your computer, than you are safely do whatever you want with that file ) Close the 7zip program to release the install.wim file.
c.   Rename the file you just copied to the desktop from bootmgfw.efi to bootx64.efi.
d.   Now go back to w7pro64bit folder and browse \efi\Microsoft. Form there copy the folder boot and paste it one level up, on the folder: \efi. It will look like this: \efi\boot.
e.   Now copy the file you saved on your desktop and renamed (bootx64.efi) to \efi\boot (inside the boot folder you copied on step 5d
6.   Now go to the root of the folder W7pro64bit and select all folders and files (9 in total) copy, and paste all those files back to your USB thumb drive. (see step 4 for more info)
7.   Go to the computer that you are going to reinstall, and before restarting it, use the program ABR (activation backup and restore) to backup the license of your windows os. (use google to find ABR). Advanced Tokens Manager (ATM ) is great too. This link may be of help: Backup and restore W7 activation. After the program finishes its magic, it will create a few files inside the folder where the program itself reside. Copy these files to a new folder in your usb. Rename it to ABR so you will quickly find it later. (if you decide to use ATM, the procedure may be a little different. But you are smart enough to figure out how to use it)
8.   Backup to an external storage all your data before continuing.(reminder: are you sure you saved the license as explained in step 7, to a safe place? To a external drive, to another computer? If you are sure, than go on with step 9)
9.   Now restart your laptop, and enter your bios settings. Go to the boot settings, and set the computer to boot in UEFI only. Not both, not UEFI first, or legacy, BUT UEFI only. Save and restart.
10.   Press f12 (or the corresponding key for your machine) to choose the boot device and chose to start from the USB thumb drive with your windows 7 pro 64 bit.
11.   If everything is done correctly, your computer will boot from the USB.
12.   Follow the wizard and choose a custom install, not upgrade. At the disk partition window delete all the partition you see there until you have only one unallocated space.
13.   Select it, and click next to install windows, without making partition in this point. The installer will create a GPT partition table not a MBR since the USB booted in UEFI mode.
14.   Immediately after the first restart remove your USB thumb, and the installation will continue from the HDD. Wait until installation finishes.
15.   When you will be finally on your desktop, on the installed OS plug your USB go to the ABR folder and click on restore.exe. It will restore your license and your copy of windows will be activated.
16.   Now you can go in computer management/disk management and shrink the HDD to create your partitioning scheme. Make sure to leave enough space to your windows os. (30gb or more for extra programs you will install at your choice)
17.      Download from lenovo.com thinkvantage system update and update your system. Windows update too can install all the necessary drivers, if you need only basic drivers support.
Note: if tvsu will fail to work, see this:
http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-Servers-down-the-wh...
It may look a looong tutorial, but once you do this for the first time, it will look a piece of cake.
Final words:
From now on, you can install windows 7 in UEFI mode with your special USB without changing your partition scheme anymore. If you have a data partition beside your os partition (see the example above), when you reinstall the system using your USB thumb drive, at the disk partition window chose the partition where windows is installed, delete it, and reinstall windows to the unformatted area. Your partition with your data will be intact and the installation will automatically mount your data partition to the system. And, all the scope of this procedure, you will always have a pure UEFI installation of the system, with all its benefits.
Have fun!
abvasili
Moderator note: changed subject to match new content. Was: Prepare an usb thumb drive, to boot windows 7 in UEFI mode
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

seanare wrote:
Thank you, as I noted here, your post was the key to my getting a Windows 8 SecureBooting setup on a W530.
In the case of Windows 8, I needed to copy the files away, reformat my USB key as FAT32 and copy the files back, and viola I was able to boot from my USB install media with the BIOS set to only boot UEFI. From there, there rest was easy (for Windows 8, the copying and renaming is not necessary, the key is having a FAT32 partition on the USB media, rather than an NTFS one; the EFI files are already in the right location).
Thank you again good sir.
You are welcome... and I'm happy that the change of the file system helps with windows 8 too. Thanks for confirming that.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

NI USB 5102 Windows7 support

Hi.
Is NI USB 5102 oscilloscope supported in Windows7 and if it is which Ni-Scope version should I use?
Thanks.

The USB-5102 is not supported under Windows Vista or Window 7 with NI-SCOPE. Although I have not tried this, you may be able to get it to work using NI-DAQmx. The 5102 is essentially an overclocked E-series DAQ board and can be programmed using either NI-SCOPE or NI-DAQ (it is the only scope card that is like this). You may need a 32-bit version of the OS to get it to work.
This account is no longer active. Contact ShadesOfGray for current posts and information.

USB RS232/4 Driver for Windows CE

I'm using USB RS232/4 device well with my laptop. I wonder whether i can use the device directly connected with Windows CE system instead of Windows XP system.
I have LabView PDA Module and a single board computer operated by Windows CE.NET 4.2.
Is there any driver of the device for Windows CE system?

Windows CE is very different from Windows XP and currently the NI-Serial drivers is not supported on Windows CE. If you feel that this would be a valuable feature please file a product suggestion by going to Contact NI and click on the feedback link.
-Josh

Satellite A500-14K - USB key not recognized with Windows 7

I have a Toshiba Satellite A500 14K, it was pre-installed for Windows 7.
I have purchased the Windows 7 upgrade: I received one disk for PC upgrade et one disk for windows upgrade. I have launched the first disk, and then the second one.
There was no special error message during these installations.
Since this upgrade, my PC doesn't recognized the USB keys whereas they work perfectly with the previous windows version with this pc .They are normally plug and play usb keys. When I launched the windows update, a driver is found, but the installation failed in error with a message of access problem.
I have check that the firewall doesn't block the access. I have installed the last version of the BIOS
I don't found any similar pb on the forum
thank you for your help

Not BIOS update but chipset utility.
Problem is that this notebook model is not supported for Windows 7 32bit but for 64bit only.
The same chipset is used on Satellite L500 and it is supported for Windows 7 32 bit so you can try to install THIS chipset utility.
Bye

IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

Is office 2010 officially supported on windows server 2012 R2

hello,
can someone tell me if office 2010 is officially supported on windows server 2012 R2 RDS?
This link only talks about Windows server 2012 not R2.
Thanks in advance.
Regards
Anthony

Hi Anthony,
I successfully installed Microsoft Office Professional Plus 2010 on Windows Server 2012 R2 before in my testing environment.
So yes, Office 2010 is supported on Windows Server 2012 R2.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Is Exchange 2010 supported on Windows Server 2012 R2?

According to the
Understanding Exchange 2007 upgrade prerequisites, https://technet.microsoft.com/en-US/Library/ee958305
these are the supported windows operating systems
64-bit edition of Windows Server 2008 Standard Service Pack 2
64-bit edition of Windows Server 2008 Enterprise Service Pack 2
64-bit edition of Windows Server 2008 Standard R2
64-bit edition of Windows Server 2008 Enterprise R2
has this list been
upgraded to include Windows server 2012 R2?? I am planning to migrate my Exchange 2007 server to 2010.
I have a downgrade license to 2008 STD R2, so i am wondering if i will have to downgrade the OS.
Thanks
B
Bobby

It's supported on Windows Server 2012 but NOT R2
https://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx

Is SharePoint 2010 Supported on Windows 2012 R2

Hi
I have read Trevor Seward's responses to various questions on this subject :-
http://social.technet.microsoft.com/Forums/en-US/ad4e17ee-83de-41d6-a974-244ceccb8a63/is-sharepoint-2010-sp1-is-supported-by-windows-server-2012-currently-i-have-os-version-of-server?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/en-US/e7539d34-aaa2-4d9c-a44c-e65d388d8944/support-for-sharepoint-foundation-2010-on-windows-server-2012-r2?forum=sharepointadminprevious
However, we have a farm which is currently SP2010 SP1 which we are about to upgrade to SP2010 SP2 running on Windows Server 2008R2 and SQL Server 2008 R2. So the farm is currently not supported by Microsoft.
We are now looking to upgrade this farm to SP2013 SP1 running Windows Server 2012 R2 and SQL Server 2012.
We plan to start this process of by upgrading Windows Server 2008 R2 to Windows Server 2012 R2.
Will SharePoint 2010 SP2 run on Windows 2012 R2 (or will we need Windows 2012) ?
Once Server 2012 R2 (or Server 2012) is up and running, we will upgrade SP2010 SP2 to Sp2013 SP1.
Finally upgrade SQL Server 2008R2 to SQL Server 2012.
So the part I don't know is will SharePoint 2010 SP2 run on Windows 2012 R2 or Windows 2012 ?
Thanks
Nigel
Nigel Price NJPEnterprises

Not a question for the Windows Server people. This is a question for the SharePoint people. You may want to try asking in a SharePoint forum like
http://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointadminprevious
. : | : . : | : . tim

USB ports not working in Windows-7 on MacBook Pro Retina Late 2013 after Bootcamp installation

1) INSTALLATION
Using Bootcamp (v. 5.1.1, OS X Mavericks) in combination with an original Microsoft installation DVD disc using an external optical CD/DVD drive. Note, the installation is NOT from an ISO image. In the Bootcamp setup window only the lower two of the three setup options are clicked, namely a) to download Windows-7 drivers to a USB stick, and b) to partition the harddrive and then to install Windows.
2) PROBLEM
After the initial Windows-7 installation no devices attached to the USB ports can be found under Windows-7. The ports are dead. Also the WLAN did not work, so no internet connection was possible.
3) CAUSE
The problem is caused when you use a USB 3.0 stick as destination for the Bootcamp driver downloads. It seems that Windows-7 cannot recognize the USB 3.0 stick properly during the Bootcamp/Windows installation process, thus failing to do perform a proper installation of the Windows-7 drivers.
4) SOLUTION
Use a USB 2.0 stick and everything will work perfectly.
Follow these steps in order:
1) Connect your external DVD drive to a USB port and insert the Windows installation disc
2) Start the Bootcamp utility
3) In Bootcamp, remove the failed Windows-7 installation and partition
4) In Bootcamp, redo the entire Bootcamp process, but this time using a USB 2.0 stick
5) Follow all further steps in Bootcamp and later in the Windows-7 installation process
6) At the end of the installation procedures you will be asked to confirm the installation of all Bootcamp/Windows drivers.
7) Bootcamp installs all the drivers and your Windows-7 installation will work perfectly.

Ok, where is this Intel driver? There is no such thing "program manager" so I am guessing you mean the Programs and features control panel, but on my machine that whole window is blank after a clean install. I still cannot get the USB ports to activate. Two fresh installs and several different USB sticks later and no luck. Should I just give up and go to Windows 8.1? I really need Windows 7 to work if at all possible. Other devices shows one USB controller without driver software so I suppose that's the culprit. There are other USB devices installed under the USB section of Device Manager, but they apparently have nothing to do with the USB ports themselves, just devices like the trackpad etc. I've spent two hours on this so far and it's getting out of control. Why doesn't this work with generic USB drivers?

IPod Nano Restore, USB Device Not Recognized. Windows XP. What to do?

Hi,
I tried to reset my iPod Nano but it did not work. It has a blank screen with the backlight on, and the music is playing. Someone suggested that I do a restore.
However, when I connect my iPod to my PC, it says it is an Unrecognized USB device. I have Windows XP Pro, the restore application says it cannot initialize iPod.
What am I to do?

Someone here said that you need two drivers usbstor.sys and usbstor.inf I found them at driverguide.com. I have not tried to load them yet but I will probply tommorrow.My coumputer will not see ipod as a hard drive, it loads video fine and all my music but no pics.

C00D118E: You device is using an outdated driver that is no longer supported by Windows Media Player

Hi,
I have Treo Pro trying to sync with my library in WMP 11... I'm getting error "C00D118E: You device is using an outdated driver that is no longer supported by Windows Media Player"... Tried to install pTune with no luck... Tried to Google it with no luck...
Connecting the other device "i-mate Ultimate 9502" with no issues even using same memory cardin Palm Treo Pro...
My temporary solution is to put the memory card in the 9502, sync my multimedia files and then reinsert it in Treo Pro... You help is highly needed and appreciated...
Abutaleb
Post relates to: Treo Pro T850U (Unlocked)

I have searched the internet and have found the following regarding your issue.
http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C...
Try using the steps in the article to see if you can resolve the issue.
Post relates to: Palm i705

USB 3.0 support in Windows 7?

Similar Messages

Maybe you are looking for