USB Drivers for Labview

I want to connect USB device wiht my PC and wanna work with it in Labview so is there any driver available in Labview,, though which i can operate with USB device (send and receieve query / data)
manisha

i have to read data from the USB device , so i m not able to find any driver for the usb, so,
how its possible to read USB device data,(using modbus query), i found USB camera driver,, but couldnt get any thing from that...
if its possible with VISA.. then,, again let me know....
& again,.,,,,,,,,,,,,,,,
usb device is same as serial devices,, so ,, can i use,, serial driver to Read data from USB device,,,??????
ur kind help cam overcome my problem,,,
manisha

Similar Messages

64 Bit Windows7/8/8.1 USB drivers for Palm Desktop

Thanks to the great folks over at Aceeca.com (makers of NEW PalmOS Garnet devices), USB drivers for 64bit Vista, Windows 7, and Win 8 operating systems are available. There are many users reporting Palm Desktop 4.x is also working.
I have synced my TX to my Vista64 bit laptop, and Windows 8.1 HP Spectre X2 hybrid successfully via my USB cable.
The drivers are located here:
Aceeca Driver Downloads
Installation instructions (from Aceeca) for Windows 7 are included in the download.
Basic instructions:
1. Download the drivers and Extract them to the same folder. Remember the folder you extracted them to.
2. Try to HotSync your device. It will fail.
3. Open the Device Manager, and look for the Yellow Triangle next to either "Acceca" or "Palm Device" under "Other devices".
4. Right-click on the device, and choose "Update Driver Software".
5. Choose "Browse My Computer for Software" and direct it to the folder you extracted the Aceeca drivers to.
6. Choose "Next" at the driver file location window, and then tell it to "Always trust software from Aceeca Ltd." then click the "Install" button.
7. I received an error message (Vista64) that told me "The drivers were installed but the device couldn't be opened." I saw that my TX had timed out and went to sleep. I tried a HotSync and it worked!!!
Good luck!
NOTE: Palm Desktop 6.22 may only show Media and Install. Here's how to fix that:
If Palm Desktop 6.2.2 only shows Media and Install, try this: Right-click on the shortcut for Palm Desktop, then choose "Run as Administrator". The ther modules should appear.
To make Palm Desktop Run as Administrator every time in Windows 8/8.1:
Close Palm Desktop, if open. (This is a very important thing to always do when using 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)
Right Click on the Palm Desktop Icon in the Metro screen, then choose "Open File Location". You will now see the actual file for the shortcut.
Right-click on the "Palm Desktop" shortcut file, then Properties. Now pick the Compatibility Tab at the top.
At the bottom of the Compatibility Tab is a checkbox: "Run this Program as Administrator", Click OK .
Try opening Palm Desktop, all the parts should appear. You may see a box open when you close the program asking "Did the program run correctly?" I picked "Yes", and it's been working fine since then!
If you are using a much older PalmOS device and want to try using Palm Desktop 4.x, you will need this additional patch from Pimlico Software:
Palm HotSync Setup
WyreNut
Forum member bobboffin has added this post:
"After attempting your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step quite difficult. This happened to me, and after some investigation I discovered the following tip that allows Device Manager to show hidden and non-present devices.
Open up Notepad and paste the following two lines into it:
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
start devmgmt.msc
Save it as SetDev.bat into My Documents.
Open My Documents in Windows Explorer and double click on SetDev.bat. Device Manager should open.
In the View menu select Show Hidden Devices.
You may now see under the Other heading the failed device with a yellow triangle against it.
You can now proceed to install the drivers per the instructions.
Note that the driver supports most Palm OS versions. I'm actually using an Aceeca Meazura 1000 ruggedized PDA running OS 4.1 --- bobboffin"
Hope this helps!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
This question was solved.
View Solution.

Thank you so much. I was thoroughly disappointed to see that the support telephone for paid support had been discontinued. I thought I would need to replace my (ancient but serviceable) Z22.
I followed the instructions listed here and am very happy to report that I completed a sync!
Thanks again.

New ipad USB drivers for pc running on win7

Error message when downloading USB drivers for new iPad for win 7 (64 bits)

My husband's laptop which is at least 3 years older than mine has not problem with charging or recognizing my IPAD. So I don't think the USB ports have anything to do with this problem. What I see is that the PC wants to load MTP USB driver which fails. I have the Apple Mobile Device driver installed and activated. My computer does not see the IPAD but Itunes does. How do get the PC to recognize the apple mobile device driver before it tries to download the MTP USB driver? I am going to try the last suggestion from Diavonex to see if it will work. This is sounding more and more like a Windows problem. BTW both my and my husband's laptops are Dell so I might try looking there also. Wish I had an answer.

Hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
    On some models you need set Factory defaults to USER and turn on the RS-232.
    Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
     You must get this working before continuing.
      You can set the COM port parameters by right clicking and selecting Properties.
     (On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
    On the left side, click on Devices and Hardware.
    Click on Serial and Parallel.
    Go to the COM port you found in Device Manager.
    Open a VISA Test Panel.
    Now I don't have one I can look at right now, so this is general idea:
   Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
   Go to the (I think) Input Output tab (you want to send a command)
   The command string input should already have a *IDN? entered, if not, type it in.
   Click on the Query button to send the command and check the response.
   If you get an ID string back (Company name, Model, FW Version ...) then it works.
   (Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

Where to find the drivers for Labview 6.1 or 6.x

I use LabView 6.1 in our labs and due to that we have many old LV programs written on 6.x I can not use newer versions of LV.
But when I try to find the instrument drivers (Agilent 33250A arbitrary waveform generator) the only available drivers are for LV 8.x or 7.x.
So my question is where do I find the instrument old drivers for LabView 6.x?
Thanks a lot,
Al.

For existing drivers (not recently developed), you can send an e-mail to [email protected] and request LV6.x drivers.

USB drivers for Ellipsis 7 tablet ...

Does anyone know where I can find the USB drivers for my Ellipsis 7, needed for development work?

Verizon Ellipsis 7 Drivers

TS1369 unable to install usb drivers for ipod/ipad/iphone, even after following steps from diagnostic testing

I have followed the steps suggested to reinstall the USB drivers for my ipad/ipod/iphone products, but receive a message that says one of the installers cannot perform the installation at this time. I've tried numerous "other" times, but get same msg.

Hi 2010c309a,
I understand you are having issues with your scan software on your computer. I recommend a complete uninstall reinstall.
The HP uninstaller program might be available on the printer CD, depending on the printer model. If you have the printer CD readily available, try this option to quickly check whether you have the HP Uninstaller, and then run it. If you do not have the CD uninstall all HP printer software from the control panel. Here is a document you could look at for help.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02259020&lc=en&product=3737195&tmp...
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started.
Scroll down to Windows imagine Acquisition. Startup type should be - Automatic, and Service Status should be - started.
Restart the computer after this step and try installing again.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Nimodbus drivers for labview 7?

Hi all,,
where can I get the nimodbus drivers for labview 7?...
I have downloaded the ni modbus drivers but the least compatibility of that was labview 7.1..But v are using labview 7.0?

Which files are you trying to run.
If the files are created in LabVIEW 7.1 version and you want to open them in LabVIEW 7.0 then you can post them in this thread.

Where do I get HP8753ES drivers for Labview 8.2?

Hello,
I am in the process of updating some Labview code to 8.2. Where do I find drivers for the HP8753ES that is compatable with Labview 8.2? I looked at the NI website and the drivers listed are for Labview 8.0, will they work with Labview 8.2? There are also "project style" of drivers, is there a difference?
Regards,
Kaspar
Regards,
Kaspar

I don't know why you think you 'have' to use the plug&play driver instead of the project style but there is no subVI called HP8753 Collect Data and none of the VIs in the driver call a function called HP8753 Collect Data. There is a subVI called HP8753 Collect and Display Data. What exactly are you doing that you cannot find a subVI? Do you have the driver functions on your palette? Where exactly did you place the unzipped folder. If you have done the installation correctly, you will have a palette just like the one below and there is no need to search for anything. They will just be there.
Message Edited by Dennis Knutson on 09-24-2007 12:08 PM
Attachments:
8753 palette.PNG ‏6 KB

Tkds30xx drivers for labview 5

Hey,..hi!
I'm working in a project and i'm using labview 5 to control a tds3014b scope, i download the ivi drivers from ni site but they are for labview 7.1, i don't have a way to upgrade the labview, when i tray to open the tkds30xx.llb to browse the subvis inside it i got an error 8 of labview (labview can't open the resource), is it a way to convert the ivi drivers to make them comptible with this older version of labview, or someone there got them and can send them to me?,....please,..help me,....and thanks for any help,.....
my email is : [email protected]

IVI drivers can be used only in LabVIEW 5.1 and above. Attached is the LabVIEW 5.1 version of the tkds30xx IVI driver. This version does NOT contain the recent driver updates and bug fixes and it is not supported by National Instruments.
Attachments:
tkds30xx_LV51.zip ‏1307 KB

Blackberry Tour USB Drivers for MAC

I am trying to revert back to Pockmac for sync (the new BB desktop software is horrendous), does anyone know if I can get the USB MAC drivers for the tour, every link I follow takes me to the download site for the new desktop software. I want the drives only. I tried to unbundle them from the new desktop software but was unsuccessful.
Thanks,

A reboot fixed it.

USB drivers for winXp needed (ms-5169)

can anyone help me finding usb-device drivers for windows xp?

Since it's USB1 you don't need any drivers.
If it's giving you trouble try toggeling the "USB legacy support" option in the bios.

Need USB drivers for Qosmio F30-112

plz.... I need USB driver for Qosmio F30-112
coz USB does not work properly

Hi mate,
your description is really, really short. Could you please describe more detailed WHY ITS NOT WORKING and what you have attached at your USB-ports.
I ask it, because USB under XP/Vista does not need any drivers. By the way ,which operating system is installed on your machine?
Greetings

Newport Conex-CC drivers for LabVIEW 2009

Dear all;
I am using LabVIEW 2009 on Windows 7. I need the drivers for the Newport Conex-CC controller. They are available in the web site http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx#tab_Literature , but the version is LabVIEW 2010, so I can`t open them.
Please, could anybody open the .vi's, save them as LabVIEW 2009 or older, and attach them to a reply message?
Thank you.
Javier

Please post the VIs to the Version Conversion board. The link is at the top of the LabVIEW board.

USB Drivers For V8237 Chipset

Does anyone know where I can get USB 2.0 drivers for the V8237 chipset? The ones listed on MSI's site says their only for the 8235.
VIA USB2.0 Drivers
Support model VIA 8235/8237 based SB chipset motherboard
Description
• Add setup VIA Filter Driver for Win2K/XP.
• Remove "One Touch" setup function.
• Driver Version:
- Win2K 5.0.2195.5652
- Win98/ME 4.90.3000.03
Note1: This Driver only for VIA based board with VT8235 southbridge chipset, please DO NOT use on other models.
Note2: For WinXP, please use Microsoft Windows Update to download driver from Microsoft or aquire the latest service pack
WinXP SP1 Download Website

That one is just for where the USB2.0 might not be identified as VIA in Windows. It just changes the text displayed in device manager. If the USB 2.0 device is shown as Standard EHC or something like that then it changes it to VIA USB2.0 or something like that. Does nothing to the driver itself.
VIA filter driver looks like the USB 1.1 patch here:
http://www.viaarena.com/?PageID=298
The info on the USB 2.0 package (same page) says it can be installed on top of the Win XP SP1 driver "to further improve device compatibility", whatever that means.

USB Drivers for Labview

Similar Messages

Maybe you are looking for