Use airport express as a wireless bridge?

Hi,
I am wondering if an airport express can be used as a wireless bridge to connect my xbox on my lan?
Lan description:
dsl modem --> wifi linksys router --> office pc
wifi -- airport express as a client --> audio system
Right now, I use it solely for itune streaming, but I would like to connect my xbox to the ethernet port of the airport express give internet access, possible?

Thank you for replying, I was finding all sorts of confusing information, some said it would work, others said it wouldn't, and I was hoping someone with a little experience would know firsthand
I'm hoping I can take it to work where we have an iMac with Snow Leopard and pre-configure it there to do what I want at home, but if not I'll find a way to make it work, the link might come in handy for me.
I'll report back anything I encounter with a link to my blog, hopefully that will help others out as well.

Similar Messages

Airport Express as a Wireless Bridge and AirTunes?

I have a linksys router and just got a Tivo I was thinking of getting the Tivo wireless adapter but after much though i had a brainstorm
What if i were go get an express and hook it up as a wireless bridge (connect the Tivo to the ethernet port) and while i am at it connect my computer to my stereo system via AirTunes.
Is it possible to use the Airport Express as a wireless bridge and use airtunes at the same time while using my linksys router?

To do this, you must use WDS. Very, very, very few 3rd party devices are compatible with Apple's WDS.
The Linksys WRT54G or WRT54GS (not latest versions v5) however are compatible with Apple's WDS. If you have one of those, it is possible.

Can you use the Express as a wireless bridge?

I need to get an ethernet connection to a slingbox next to my airport express. My airport express is currently configured as a client that connects wirelessly to my netgear router that connects to my cable modem. I can play itunes on any computer to the airport express.
Is it possible to use that ethernet port on the AE to bridge my slingbox back to the netgear/cable modem?

Can you use the Express as a wireless bridge?
Yes as long as WDS is used with a compatible device.
Is it possible to use that ethernet port on the AE to bridge my slingbox back to the netgear/cable modem?
No. The Netgear base station is not compatible with Apple's WDS implementation.

I have a MacPro 2008 workstation without Airport or Airport Extreme CArd isntalled. Can I use Airport Express to connect (wireless) to my wireless network? If so, can I then connect my Airport Extreme to my MAcPro by a ethernetcable ?

I have a MacPro 2008 workstation. It has no Airport/Airport card so I have to use an ethernetcable to connect to my modem. As the MAcpro
is in my office in the attic and the wireless modem is in the basement I have a problem. I wonder if it is possible to use Airport Express to connect to the wireless network? Itshould be like this: in my office I connect the MacPro with AE through an ethernet cable. If I can then get AE to connect (wireless...) to my wireless network I should be ablle to connect my MacPro to internet/wireless network. Is this possible???? Any suggestions are very much appriciated. Thank you.

Apple calls this configuration a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Airport Express as a wireless bridge can't connect using the 2.4GHz band

I have an Airport Extreme with simultaneous dual-band support as well as an Airport Express serving as a wireless bridge to extend the range of my primary base station.

By the way, the 5GHz band does not penetrate very well,
That is not surprising since the higher frequency signals are not as strong as 2.4 GHz signals. Many users are finding that you almost have to have a line-of-sight situation between the computer and router for 5 GHz to work really well.
and the signal becomes weaker significantly after it penetrates through two walls.
Again, not surprising. What is surprising is that the AirPort Express was choosing the 5 GHz band to "extend", as it normally latches onto the stronger of the two signals, which almost always the 2.4 GHz signal.
You may be correct that the newer firmware has made some changes in this regard. My guess would be that most users were trying to extend the 5 GHz band and not having much success. We'll keep an eye on this.

Streaming 3d movies to my Samsung 3DTV using AirPort express and a wireless LAN adapter has not worked. What is my cheapest option for making this happen?

I need a transfer rate minimum of 9mbps. My AirPort express and 3DTV are on different floors, so I cannot directly connect with an ethernet cable. Can I buy an older AirPort express, use it as a bridge, and connect my TV to it via an ethernet cable?

Hi rockchalker,
Thanks for using Apple Support Communities.
For 802.11n Wi-Fi base stations, creating a roaming network is by far the best choice. This will provide the best throughput between the base stations and your Wi-Fi devices.
If you are unable to build the recommended Roaming network, then a Wirelessly Extended Network is the next best option.
For more information on this, take a look at this article:
Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations
http://support.apple.com/kb/HT4145
Hope this helps,
Mario

Use Airport Express as Internet hub, bridge Time Capsule for N-only?

OK I checked on the forums, but I could not find anything quite specific it what I was trying to accomplish.
I recently got a 500GB Time Capsule. I changed my network around, which was based off of two Airport Express stations – on in the office hooked up to internet & printer, one in living room hooked up to sound system – and made the TC the main hub, connecting modem to it's WAN port and bridging the office AX via LAN port in bridged mode, sharing the living room AX as WDS. This way, I had the TC in N-only mode in 5ghz spectrum using wide channels for fastest performance. All this worked well.
Except that I noticed that with the TC in the office – where the laptops rarely are – my data transfer speeds were no better than .11g speeds. So I mucked around a little, and noticed that it really was just the case that the separation of distance & obstruction was slowing the transfer speeds over .11n-only that much!
Well, it occurred to me that there may be another way. What I had intended to do was to hook up the modem back to the office AX, move the TC to the living room where it'd be "line of sight" to the laptops most of the time, and bridge the TC and living room AX over LAN. So the idea was to keep the networks separate wirelessly still, and have the internet "bridged" wirelessly from the office AX to the living room AX and then over LAN to the TC. The thinking was that the hit on the internet connection would not be noticeable as the threshold for that is well below the streaming capabilities of the AX network still, so I'd not lose anything there, but gain MUCH faster speeds with the TC in line-of-sight of the Laptops (3x as much in testing; with TC in office and laptops in living room, 1.3gb folder took 9 minutes, same folder line-of-sight testing took only 3 minutes).
However, I CANNOT get this to work properly. I thought I really just needed to move the TC to the living room and bridge it there, as the services should be shared over the LAN port since the 2.4ghz AX are in "bridged" mode, but that didn't work. I kinda-sorta got it to work by forcing both the AX network AND the TC network into "bridged mode," but that didn't seem right or wise, so I tried some other settings, putting the TC to bridged and having the office AX distribute IP addresses, but then it wouldn't show up under restart, and I'm just confused now on how to set that up!
What i need is: To have the "Office AX" hooked up to the modem & printer, on 2.4ghz since it's the older .11g model, with the "Living Room AX" on that same network. Then the TC in 5ghz N-only bridged to the Living Room AX via LAN, so it can share the services (internet & airtunes) and still get high data transfer speeds to the laptops via the advantage of Line-of-sight, non-obstructed networking.
How do I need to set this up? It's possible, right?
Message was edited by: Anthony Caltabiano

OK while I was working out this morning, I was trying to think of WHY my setup wasn't working. I had an epiphany, and decided to try once more. This time, it worked.
The problem was that originally I had the Living Room AX set up as a Remote, so it was hooking INTO the network, not extending it. I know that with that setup you can't hook up to THAT station and get internet or anything, you hook into the MAIN station and you can SEE the remote's services that are "plugged in" to it.
I didn't think this would be an issue with the TC physically attached to the ethernet port, but apparently this behavior extends to the ethernet port on remote stations for internet access... I had a feeling that MIGHT be it, so I started from scratch, and this time set up the Living Room AX to extend the network instead of just joining it. Then hooking up the TC to the Living Room AX's ethernet port and selecting "Bridge Mode" on the TC got me the good ol' green light!
So, if anyone out there is trying to build a dual-band network, with their TC on .11n-only and bridge to services supplied by a 2.4ghz network, AND route their internet access through the 2.4ghz network instead of the TC so that they can keep their TC more centrally located for better performance... make sure you do it like this: Set up the alternate (2.4ghz) network as relays, "extending" the network, so that when you plug into it, the TC essentially thinks it's plugged directly into the main router, no matter where it is. The throughput hit for internet access over WDS shouldn't be a problem for US-based peeps, as our speeds are typically well below the .11g threshold anyway.
I also found that it helped to NOT hide the SSID of the 2.4ghz network; doing that kept rendering failed attempts to force the secondary AX to join as WDS. Once I redid it without hiding the SSID, all went well.

Airport Express as a wireless bridge

I can buy an airport express relatively cheaply (£20) and was wondering if it can solve an issue I have. I have a Toshiba HD-XE1 HD-DVD player which has an ethernet port use for upgrades etc. I have a (non-apple) wireless network 802.11a/g using wep security. So my question is whether I can use the airport express to provide a wireless bridge for the HD-XE1 and if so how?
Thanks in advance

Hello foxyloxy. Welcome to the Apple Discussions!
You could connect the AirPort Express Base Station (AX) directly, using an Ethernet cable, to the existing wireless router. In turn, the AX would be reconfigured as a bridge to allow the existing wireless router to continue to provide NAT/DHCP services for the entire network.
To set up the AirPort Express Base Station (AX) as a bridge, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, using the AirPort Admin Utility (located in the \Applications\Utilities folder), make these settings:
Network tab
o Distribute IP addresses (unchecked)
o Apply the new setting.

How to use airport express wired and wireless at the same time

Hi,
I currently have FiOS with Verizon, they ran a coax cable to the Verizon router. I didn't ask them to switch to CAT6 cable since I have an airport extreme base station and an airport express base station (both are the newest generation). I ran a CAT6 cable from the Verizon FiOS router to my AEBS (extreme) to make it the default wireless router. The Verizon router and extreme are in one room. Now, the Airport express is in my living. I'd like to extend the wireless network from the extreme. However, I can't seem to find a way to use both wired and wireless from the airport express at the same time. It's now either via wired, or wiresless. So is there a way to get both work?

Can you tell us if you used Apple's instructions for a "roaming" network?
http://support.apple.com/kb/HT4260
Although the instructions picture a 2nd AirPort Extreme in the illustrations, the setup instructions would be exactly the same for an AirPort Express.

Airport Express - Ethernet to Wireless Bridge

I use an Airport Express to create a wireless network in my university halls from the ethernet port in the wall. All of my apple devices can connect without problems, however whenever a Windows computer connects it can successfully join the network but only local only, it can never reach the internet. Is there any way to solve this problem!?!?!?!?!?!?!?!

Welcome to the discussion area!
Check the firewall settings on your Windows computer. You really need to post in a Windows forum for your operating system, as your AirPort Express is working fine and there are no other adjustments on the Express that you could make.

Problem using Airport Express to extend wireless network.

I'm trying to extend my wireless network with an Airport Express (brand new, bought last week), but can only seem to do so by connecting it via cat5 to the router, which doesn't actually extend anything. I have a Linksys WRT54GS with DD-WRT, and want to have the Airport Express in a different room so cat5 isn't an option.
I'm using WPA2 Personal security on my network.
I've tried to follow several sets of instructions from these forums and on blogs, but the only things I've been able to do are...
1) connect via cat5, selecting "Create a new network" with the same SSID and such, but it doesn't give me any more range.
2) connect wirelessly selecting "Join an existing network", but that doesn't extend the network at all either, even if I put the AE at the edge of the network now.
Thanks in advance. All I really want to do is access my wireless from the other half of my house.
Zack

It was possible to create a WDS between the older 802.11g AirPort Express and the Linksys WRT-54GS and this (as you know) has been documented on the Internet. However, I do not know of anyone that has been successful doing so with either of the 802.11n generations.
The two methods that you have tried would not work as neither is the proper method to set up a WDS. Please check out the following Apple Support article for more details. If you are successful in setting a WDS between them, please post back your results.

Using Airport Express to extend an existing wired/wireless Dlink network

Our network uses a Dlink router which must be located in the basement. Our home office Apple computers are wired, and the wireless Apple laptop is almost always used in the living room, directly above the Dlink, so no signal strength problems there. However, the wireless signal does not reach as far as the home office. It's only 20-25 feet away on the main floor, but for some reason, probably structural, the wireless signal doesn't penetrate.
Now I need to extend wireless access capability to the home office, so that I can use the iPod Touch in the office. I've read through a number of posts, and haven't found one that exactly matches this issue.
The information about joining an existing network has this sentence in it:
"Or you can use AirPort Express or AirPort Extreme to extend the range of an existing AirPort Extreme or AirPort Express network by creating a Wireless Distribution System (WDS)."
The existing network I have isn't an AX network. And it's both wired and wireless. And one of the detailed posts explained why a WDS was not the best way to go. Plus I'm confused by references to "base stations" which seem to refer to something that looks like a Time Capsule, not to an AX.
If AX will do what I want it to, I'm envisioning plugging it (all by its lonesome) in to a wall outlet in the hallway outside the home office. That's based both on what I want and what the salesperson said AX could do when I explained what was wanted.
The Dlink network has been working beautifully for months, and I don't want to do anything to screw it up! That includes even opening up the AX utility software until I know exactly what to do.
Can I do the setup (once it's explained!) on the wired computer? If I have to connect the AX to the network as part of the setup, can I use the 5-port switch that extends the wired connection the extra two feet to the computer (and also provides the wired network connection for the main printer)? Or should I take the laptop downstairs and connect the AX directly to the Dlink router?
Thanks,
Marg

+If I connected the AX by cable to my 5-port switch (which in turn is connected directly to the Dlink), would that constitute "an ethernet connection to the D-Link"? If so, then it should be possible to use it as described in your 6th paragraph, to "expand ... (our) main wireless network" -- is that right?+
Yes, this will work great.
+I'd never heard of ethernet powerline adapters, which sound very cool but are not wireless per se - you need a cable to connect the computer with at the far end, and it's wireless capability that I'm trying to create in the home office.+
Rather than hooking a computer up at one end, you could hook up the AirPort Express at one one and setup wireless that way. You won't need the adapters in this case since you have access to the switch. You may have need sometime in the future to get an ethernet signal to another part of the house, so keep this option in mind.
Here is how to setup the AirPort Express. You will use AirPort Utility, which should already be on your Mac Pro. Its located Hard Drive > Applications > Utilities.
Temporarily, connect the AirPort Express (AX) directly to your computer with a short ethernet cable to set it up. When you have the configuration done, you can disconnect the cable and move the AX to the location where it's needed.
Open AirPort Utility and click Manual Setup
Click the Base Station tab below the row of icons to enter a name and device password for the device and choose your time zone, etc.
Then click the AirPort icon in the row of icons at the top of the setup page.
Click the Wireless tab below the icons
Wireless Mode....Create a wireless netork
Wireless Network Name....Exact same name as your D-Link wireless network name
Radio Mode....802.11n (802.11b/g compatible)
Channel...Automatic (see note* at bottom)
Wireless Security...exact same setting as D-Link network
Wireless Password....exact same setting as D-Link network
Click the Internet icon in the row of icons
At the bottom of the page, make sure that the setting for Connection Sharing is set to "Off (Bridge Mode)". This setting allows the AX to work in tandem with the D-Link.
Update to save settings.
*Automatic will usually work well for this. Ideally, you want the D-Link and AX to be on channels that are least 5 channels apart. Automatic will usually choose an open channel, but you may need to manually set the channels on both routers for this step.
Your setup should work fine. Please post back on your progress or questions.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do I use airport express to extend my wireless network?

How vcan I extend the range of my wireless network using Airport Express?

It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
name of the wireless network
the correct wireless security settings
and correct password.
"Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc. Extremely limited.
Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet. What exactly would that achieve?
That is a completely different subject since this discussion is about extending a wireless network using wireless only.

Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

Hi I was wondering :
Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

Use airport express as a wireless bridge?

Similar Messages

Maybe you are looking for