Use Apple TV as storage disk?

I am getting crazy about the sync options. As may iBook (40GB) has less storage capacity as the Apple TV disk (160 GB) I thought I could use Apple TV as "final" storage place of my multimedia files. However, each time when I synchronise with iTunes, Apple TV deletes the content that I loaded before and keeps only the actual iTunes content (from the iBook). Means if I delete something on the iBook it will get also lost on Apple TV or I store it back in the laptop, which I don't want to do. Is there no way to avoid that? Maybe through USB connection? Appreciate your comments.
Message was edited by: Dr. Caligari

Welcome to the  Discussion Forums
Dr. Caligari wrote:
I am getting crazy about the sync options. As may iBook (40GB) has less storage capacity as the Apple TV disk (160 GB) I thought I could use Apple TV as "final" storage place of my multimedia files.
That's the last thing you would want to do.
However, each time when I synchronise with iTunes, Apple TV deletes the content that I loaded before and keeps only the actual iTunes content (from the iBook). Means if I delete something on the iBook it will get also lost on Apple TV or I store it back in the laptop, which I don't want to do. Is there no way to avoid that? Maybe through USB connection? Appreciate your comments.
The only recommended way to do this would be to get an external drive for your ibook and move your itunes library from the ibook to it. However you may want to read THIS

Similar Messages

Cannot mount storage disk after running "reboot -- -r"

I have a server installed Solaris Sparc u4 and integrated with a storage. When executing "reboot -- -r" or "init 6", the storage disk cannot be mounted after system startup again. The output of console said "
obtaining access to all attached disks
mount: /dev/md/emads/dsk/d50 or /home, no such file or directory
I really added item into /etc/vfstab which is "/dev/md/emads/dsk/d50 /dev/md/emads/rdsk/d50 /home ufs 2 yes global,logging ".
But, if I use "reboot" instead, the storage disk can be mounted normally.
I'm so confused. Could you please tell me the cause and solution? Well, I don't wanna use "mountall" every time after the system is rebooted.

in single user mode, I cannot mount it manually
ema31166# mountall
/dev/rdsk/c1t3d0s3 is clean
/dev/md/rdsk/d6 is clean
/dev/rdsk/c1t3d0s1 is clean
/dev/rdsk/c1t1d0s1 is clean
/dev/md/rdsk/d12 is clean
checking ufs filesystems
/dev/md/emads/rdsk/d50: No such device
Can't open /dev/md/emads/rdsk/d50: No such device
/dev/md/emads/rdsk/d50: CAN'T CHECK FILE SYSTEM.
/dev/md/emads/rdsk/d50: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.

I share a an apple id with my kids. We all use the same credit card for purchases. Is it possible for only me to use the icloud online storage without making this available or visible to the kids?

My kids and I all use the same credit card and password for app and music purchases. I'm assuming we all use the same apple ID too. (not sure) We can share apps and music although we all have our own itunes libraries. Is it possible for only me to use the icloud online storage without making this available or visible to the kids or do we all have our own storage?

I just checked and they have already sucked up all my online storage. Ahhh techy teens! I think I will just leave it at that and back my own stuff up on my computer. Less confusing
Thanks for all the help! I am definitely more educated now and I'm off to check that cc bill too.

Use the Power Mac as a storage disk

Hi
I am setting up a iMac to be my main computer and was wondering if I could use my old Power Mac 4,1 as a storage disk? If so what would I need to do to have this happen?

I successfully File Share OSXes from 10.4.11 to 10.10.3 or any combination thereof in either direction.

HT4847 On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
to disable this, you must use a command under terminal.
to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
once under terminal, type the following text exactly:
sudo tmutil disablelocal
hit enter.
you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
in a few minutes the space taken up by time machine should be cleared.

Using a non-Apple network attached storage device in lieu of Time Capsule

Can anyone suggest the steps one would need to take to have a non-Apple network attached storage device (HPMediavault) recognised by the Airport Utility so that it may be employed for file storage via Time Machine in lieu of a Time Capsule?

Sorry, but TM will not work with third-party NAS - only Time Capsule.
Requirements to use Time Machine
Time Machine is only available with Leopard (10.5.x)
1. External FireWire or USB 2.0 drive
2. Time Capsule
3. Drive shared by a Mac running 10.5 or later using File Sharing
4. Drive shared by a Mac running 10.5 Server
5. SAN volume managed by Apple's Xsan file system
A TM drive must be partitioned with either APM (PPC) or GUID (Intel) and formatted Mac OS Extended (Journaled.)
An Airport Extreme Base Station with a USB drive connected to it can be used with TM but it is not supported by Apple.

HT201238 Can you buy more storage using Apple Pay?

Can you buy more storage using Apple Pay? How?

I'm trying to purchase additional storage with credit card but still get the unknown error / dismiss problem

As iMac user upgraded to Mountain Lion and lost all Legacy connection with years of Apple/Mac data storage. How can recovery since every default says "no longer supported, After years of Mac software use now it is not accessible ??????

As iMac user upgraded to Mountain Lion lost all Legacy connection with years of Apple/Mac data storage. How can recovery since every default says "no longer supported, After years of Mac software use now it is not accessible ??????

Please provide more details. What version OS X were you using?
Are you saying that Mail faIled to upgrade and you lost your old mail?
Are you asking about PowerPC applications that require Rosetta to run like AppleWorks and Microsoft Office 2004?

RE: Apple iMac 27 Hard Disk Replacement Complaint

Dear Customer ServiceManager,
RE: Apple iMac 27” Hard Disk Replacement Complaint
On May 12, 2011, Ibought an iMac 27” for my daughter from your official Hong Kong website (www.apple.com/hk).
I am writing tocomplain about my dissatisfaction of your poorproduct quality, irresponsibleattitude of your customer service, and most importantly my painful experience with your Apple Careservice. I am also very disappointed with how your Apple Care staff made a discriminating comment about your low income Hong Kong customers.
On July 28, 2011, mydaughter received an email from your company ([email protected]) informing her that the hard disk of her newly purchased iMac wasdefective due to factory error. You promised to replace the defective hard disk with a brand new onefree of charge, but when she asked your HK Apple technical support if therewould be on-site replacement service, your staff told her that she can onlyeither carry the 30-pound iMac herself to their service center or pay HKD1200for the Apple Care which offers the on-site replacement service.
First of all, I foundyour request very unreasonable. Mydaughter was not the one who broke the hard disk, your company informed herthat you gave her a defective one. So why is the responsibility and the cost of taking the iMac for repairshould be borne by her, as an innocent customer, who paid HKD18, 000 for aniMac directly ordered from your official website? She did nothing wrong but your company required her to barethe cost of transporting a 30-pound iMac and the risk of causing damage on theway.
Secondly, I believeyour company has deceitfully forced my daughter to buy your Apple Care, whichis completely against her original will. Since she is just a 22-year-old girl, it is impossible for her to carrythe 30-pound iMac by herself. Andclearly, she was not given a choice but had to pay HKD1200 for the AppleCare. This made me doubt if thisis a scam of your company. Is thisa way of how Apple make extra money by giving your customer faulty products anda mission impossible, then forcing us to pay for a service that we did notneed?
Anyway, thepainfulness of enjoying your Apple Care service has just started…
On Aug 10, 20111:30pm, your service man came to change her hard disk with just a look as ifthe process was very ‘efficient’ and left after half an hour, even her Mac OShas not yet been completely installed. After he left, my daughter found that the OS could not be installed, soshe called your service center immediately and under her strong request, he hadto come back on the same day and check the new hard disk. He found it proved to be a defectiveone again. I was shockinglysurprised that your company, which always claims to produce products of highquality, selling at an expensive price, replaced my claim-to-be defective harddisk with a defective one again. Iwonder how Apple’s quality control is done? Your company didn’t even bother to check if the new harddisk is working before replacing it for customers.
My daughter requestedfor a new one, but then your service center said they had no new stock andasked her to wait until further notice. But without any definite date, it means my daughter’s brand new computercannot be used for… I don’t know how long. Please notice that I paid HKD18,000 to buy a first-classproduct of high quality, as claimed by your company all over the world.
So my daughter had tocall your service center again and forced them to return her original harddisk. Till 5:00 pm on the sameday, another technician came to reinstall her original hard disk into hercomputer. Surprisingly, all thedata in her original hard disk was still there, which means there is a riskthat all her personal data and information had been accessed by your servicecenter staff.
As a father, I had totake over the matter from my daughter and called your hotline 2112 0099 at5:00pm on Aug 10, 2011. After 30minutes, I could finally talk to one of your technical support staff for 10minutes about my complaint. Heasked me to hold the line and wait for him to transfer my call to his seniortechnical support colleague, so I kept on waiting for 15 minutes, but finallythe line was being cut and no body contacted me and my daughter again.
I had to call yourhotline again at 6:00 pm and waited for another 15 minutes to reach one of youradvisors. He passed my line toyour senior technical support advisor located in Singapore. He said he is just a technical supportadvisor, so he could not take my complaint directly. He needed to talk to meagain on the next day with a customer service advisor. He promised if he could not reach me onmy mobile phone, he would leave his direct line for me so that I would not haveto waste another half an hour to reach him through the hotline.
On Aug 11, 2011 5:28pm, I received a voice mail from your senior technical support advisor asking me to call him back but he didn’t leave any direct telephonenumber as he promised. So I triedto call back the caller ID, which was shown on my phone. However, the auto reply of this numberwas, “This is an invalid number”. I asked the Hong Kong Telephone Company to help me to call but even theycould not reach this number. Theytold me this number was from Shanghai, China. So I had no choice but to call your hotline again. After 25 minutes, one of your advisorstook my call and I had to repeat my story to him again in order to have him putme through to talk to your senior staff 42058 again. I asked him why he didn’t leave his direct number for me tocall him back as he promised. Hesaid he forgot! What a surprisinganswer to leave your customer nothing but a number that he knew clearlycouldn’t be reached.
By that time, I havewasted nearly 45 minutes to reach him, and it was already 6:20pm and thecustomer service advisor was off work. Therefore, I made an appointment with him again and we agreed that hewould call me between 9:31-10:00am on Aug 12, 2011 morning. I took half day-off from my work towait for your senior staff to call me.
Unfortunately, Iwaited until 10:10 am and nobody contacted me again (I left both my mobilenumber and email to them).
Finally, I called the hotline again and waited for 15 minutes, an advisor put me to your on-dutyCustomer Service Manager, Ken. After I told him my name, he realized that he should be theone responsible for calling me this morning, but since he had a meeting thatmorning, he forgot to call me again! The Apple staff didn’t keep their promises after all which disappointedme a lot. It seems to me thatApple is unwilling to accept negative feedbacks from customers.
Ken told me thatthere was nothing he could do.
At the end, I wasreferred to a Customer Relations staff, Ms. Wing Liu. Her response was also there is nothing she can do exceptgiving me a case number of my complaint. Since then, I never get any response from Apple regarding my case.
I believe Apple has afull record of all my conversations with your staff and thus, should be able tolook into my case thoroughly. Isincerely hope that Apple can take my feedback seriously and respond to my complaintin a responsible manner, but not just trying to suppress your customers, whohave already been treated unfairly, from claiming their rights. Otherwise, it is really a shamefor Apple to claim itself delivering high quality products and services allover the world.
Yours truly,
Tommy Fong
Apple Customer
<Personal Information Edited by Host>

I just realize Apple might have blocked my daughter's Apple ID from posting in your discussion forum.
My daughter was trying to go to this Community Page by logging into her account. But your Communities webpage displays a "We'll be back soon" webpage. Then I try to login with my Apple account and it works fine.
<Email Edited by Host>

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

I am trying to install Windows XP Professional using Apple Boot Camp.

I partioned the hard drive using Apple Boot Camp. Inserted with Windows XP disk into CD drive and hit Start Installation. I got a black screen with blinking white underline in top left corner. Computer will not do anything. What do I do now?

http://www.microcenter.com/category/4294967276,4294965769/Microsoft-Operating%20 Systems
Decent prices, there.
Things to note: 32-bit XP only recognizes 3.5 GB RAM. 64-bit XP Home recognizes 16 GB RAM. 64-bit Pro recognizes 192 GB RAM.
If you have Core2Duo or better processor you have 64-bit system.
Darn to heck ... XP is needed. Sorry.

Why does my camera roll say I am using 682 MB of storage but I only have 12 photos saved?

Why does my camera roll say I am using 682 MB of storage but I only have 12 photos saved to it?

If it's really a couple dozen pictures, I would expect it should be under 100 MB.
You can try resetting your iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the used space is still so high.

Can I use Apple TV (version 3 with IOS 5.1) Airplay to simultaneously to stream audio to another Apple TV without using itunes on my PC?

I have 2 Apple TV's version 3 with IOS 5.1 and would like them both to play the same music through Match simultaneousy but without having to use iTunes on my PC.
It seems I can only select one of them at a time for audio output, is there a way to make them both play at the same time?

tammersalem wrote:) <-HDMI-> (HDTV)
My main concerns are:
-If I use iTunes on my main computer, will it then be available to Apple TV?
-If I use Apple TV to download will it be available to my Main computer?
-Can the Apple TV use a media server for storage over LAN (using NTFS Samab or otherwise)?
Basically iTunes feeds AppleTv with media either syncing (copying to it) or streaming live.
Media must be compatible with AppleTV.
AppleTV requires a proper iTunes instance running - it cannot access a NAS directly.
If you store media in a folder on a NAS and it's part of the computer iTunes library (just stored on the NAS vs internal/external drive), then when running iTunes makes this content available to AppleTV.
Data will travel:
NAS > network > iTunes > network to AppleTV
As the path is potentially slower than internal/external attached drive > iTunes > network > AppleTV, it may or may not work robustly for streaming.
If AppleTv is set to sync (it can also stream in this mode), when you purchase direct on AppleTV, the media should sync back to where the itunes library is stored (via iTunes) to keep things in sync and to allow you to backup the media.
You cannot drag/drop media to/from AppleTv across the network, nor can it directly access storage itself - iTunes is an essential cog in the wheel.
The majority of commercial 'in-built iTunes media servers' will not work directly with AppleTV as it has to be 'paired' with iTunes by entering a numerical code in iTunes and does not simply see 'shared libraries'.

HT4847 How to use iCloud as virtual storage

Sorry for my ignorance but does anyone know how to use iCloud as virtual storage for music n photos that I don't want on almost full iPhone? I have an iPad too and don't mind if these items are on there. Thx!

You can't. It doesn't have an option that allows you to not have a copy of the data on your Mac. You can make the suggestion to Apple at https://www.apple.com/feedback/icloud.html

DBCA can not use ASM for database storage due to following reason: Could no

Hi
I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
I installed Grid Infrastructure with grid user:
Node1: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
Node2: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
I installed the Oracle Server with oracle user:
Node1: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
Node2: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
All related Grid Infrastructure is functioning well in both nodes:
$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE node03
ora.FRA.dg ora....up.type ONLINE ONLINE node03
ora....ER.lsnr ora....er.type ONLINE ONLINE node03
ora....N1.lsnr ora....er.type ONLINE ONLINE node04
ora.asm ora.asm.type ONLINE ONLINE node03
ora.cvu ora.cvu.type ONLINE ONLINE node04
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE node03
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node03
ora.scan1.vip ora....ip.type ONLINE ONLINE node04
ora....SM1.asm application ONLINE ONLINE node03
ora....03.lsnr application ONLINE ONLINE node03
ora....d03.gsd application OFFLINE OFFLINE
ora....d03.ons application ONLINE ONLINE node03
ora....d03.vip ora....t1.type ONLINE ONLINE node03
ora....SM2.asm application ONLINE ONLINE node04
ora....04.lsnr application ONLINE ONLINE node04
ora....d04.gsd application OFFLINE OFFLINE
ora....d04.ons application ONLINE ONLINE node04
ora....d04.vip ora....t1.type ONLINE ONLINE node04
$
The ASM instance are running well in both nodes
Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
$
$ lsnrctl status
LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
Start Date 16-MAY-2012 15:24:19
Uptime 0 days 0 hr. 16 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
$
$
DATA & FRA disk group are created:
$
$ echo $ORACLE_SID
+ASM1
$
$ asmcmd
ASMCMD>
ASMCMD> ls -lt
State Type Rebal Name
MOUNTED EXTERN N DATA/
MOUNTED EXTERN N FRA/
ASMCMD>
ASMCMD>
The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
What can be passing in this case... ?
Thanks in advance

Thanks both
Really the problem initially was because of this:
[INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
/home/grid/.ssh -------> /home/grid/.ssh
authorized_keys
known_hosts
This is the procedure if you run the wizard at the node1.
The problem is that the wizard creates the keys incompletely...
Thanks

Use Apple TV as storage disk?

Similar Messages

Maybe you are looking for