Use of 8D Report with QM

Hi folks,
I need some help with the 8D standard Formulary. I started the conservation under the following treat: Re: 8D Report Error
But that tread didnu2019t solve my problem and now itu2019s posted like answered.
We are using here an Enterprise 4.7. and want to use the standard 8D report combined with an quality message.
Were using the message Q2 (but I tried all standard messages) and filling out all the necessary information like: Tasks and Activities after that we save the message and modify it again to add the 8D. After saving the message the system prints the 8D report without problem but only shows the 1 step of the 8 points which is posted in the message.
My question is what is to do to add all the activities and tasks to the 8D report.
The standard documentation says that the standard report shows all the tasks and activates from the messages. Maybe there is missing some customizing?
Many thanks
Best regards David

Dear David,
please tell me the steps how to fully used 8D reports
Regards,
Sudhir
Message was edited by: sudhir shiradkar

Similar Messages

Using Fields in Reports with stored Data

Hello,
i like to use fields in Reports with saved Data in it.
Is this possible ?
Example:
A Invoicereport with saved Data in a File. Now i like to get the Field Invoice_ID to use this in VB.net.
Any Idea ?
VS2008 with CR_reports in 8.5
Thanx

You wrote:
Example:
A Invoicereport with saved Data in a File. Now i like to get the Field Invoice_ID to use this in VB.net.
You can export a report with saved data and then change the filtering without hitting the DB again. If you are asking if using a flat file as the data source there are multiple ways to do this. Define an ODBC data source to the file and specify the sturcture, or using ADO.NET and a record set, or using XML as the data source. Lots of ways in newer versions of CR. 8.5 was limited so the ODBC example is your best option.
Or if you are asking how to get the data from the report you can use REadRecords. Not sure if 8.5 has this functionality though. It's way past it's end of life so I can't look.
You wrote:
VS2008 with CR_reports in 8.5
Not supported, 8.5 has no .net assemblies and no RDC, only option would be to use RAS to make changes or reading records so you need to upgrade.

Help needed to use only SQR reporting with Oracle 10g

I have very old SQR reports (ver 2.28) that are still being used by connecting SQR to an Oracle7 DB. We have migrated the data from Ora7 to Oracle 10.2.0.4. The issue is that SQR 2.28 is not able to connect to Oracle 10.2.0.4. Hence I want to use the new version of SQR that is part of OBIEE.
I am not familiar with OBIEE and my interest is only using the SQR portion of it.
1. Can any one help me as to how to go about installing SQR portion of OBIEE on a Linux Itanium 64-bit box? My Oracle 10.2.0.4 DB is also running on the same box.
2. What are the minimum components of OBIEE I need to install to make use of SQR ?
3. Any other relevant information
Thanks.

When installing webgate, make sure the Access Server is running. You will get this error if Access Server is down or not reachable. ( Make sure from the machine where you are installing webgate you can ping to Access Server by Name).
Thanks
Ram

Use same report with different MySQL database

I am using CR2008 with MySQL 5.1.
I have a report that works with one of the tables (T1) in a MySQL database (DB1). I have another MySQL database (DB2) with the same table name and structure, except that the data has been updated.
I want to use the same report, but just ask CR2008 to now use DB2 and T1.
Try as I may (using Set Data Source Location...), but I'm not getting anything to work.
I looked for a previous thread on this, but was unsuccessful.
Thanks for any help.
David

Thank you for your helpful response. What I am really asking is this -- when there is a CR2008 report based on db1, table1, and you want to use the SAME report with an identical table in a DIFFERENT database (db2, table1), can I easily use the same report? Or, do I have to generate another version of the report?
Thank you again.
David

Create a report with PL/SQL

Hi,
I have two pages: the first page contains two text fields and a submit button. In the first text field you can enter a name and in the second field you can enter a number. That means you can search a record by name or by number.
In the second page the report is generated depending on the used text field of the first page.
I tried to to define a region source code with PL/SQL for the report, but nothing appears on the report page although the record I was looking for exists in the database.
begin
if :ENTERNAME IS NOT NULL then
FOR item IN (select "TB_PERSON_INSTITUTION"."PI_ID" as "PI_ID",
"TB_PERSON_INSTITUTION"."PI_NAME" as "PI_NAME",
"TB_PERSON_INSTITUTION"."PI_VORNAME" as "PI_VORNAME",
from "TB_PERSON_INSTITUTION" "TB_PERSON_INSTITUTION"
where upper("TB_PERSON_INSTITUTION"."PI_NAME") like upper(:ENTERNAME||'%'))
loop
DBMS_OUTPUT.PUT_LINE('First name = ' || item.PI_NAME ||
', Last name = ' || item.PI_VORNAME);
end loop;
end if;
end;
Regards
Mark

Hi,
ok thanks. I tried to use the SQL-Report with type "SQL Query (PL/SQL function body returning SQL-Query)" and made a few changes in the SQL-Statement so that a second table is also included:
declare My_select varchar2(500);
begin
if :TEXTEINGABENAME IS NOT NULL then
My_select:='SELECT
"TB_ADRESSE"."A_PLZ" "A_PLZ",
"TB_ADRESSE"."A_ORT" "A_ORT",
"TB_ADRESSE"."A_ID" "A_ID",
"TB_PERSON_INSTITUTION"."PI_MITGLIEDSNUMMER" "PI_MITGLIEDSNUMMER",
"TB_PERSON_INSTITUTION"."PI_NAME" "PI_NAME",
"TB_PERSON_INSTITUTION"."PI_VORNAME" "PI_VORNAME",
"TB_PERSON_INSTITUTION"."PI_ERGAENZUNG" "PI_ERGAENZUNG",
"TB_PERSON_INSTITUTION"."PI_ERGAENZUNG1" "PI_ERGAENZUNG1",
"TB_PERSON_INSTITUTION"."PI_ID" "PI_ID"
FROM
"TB_ADRESSE" "TB_ADRESSE",
"TB_PERSON_INSTITUTION" "TB_PERSON_INSTITUTION"
WHERE "TB_PERSON_INSTITUTION"."PI_ID" = "TB_ADRESSE"."A_F_PERSON_INSTITUTION"
AND upper("TB_PERSON_INSTITUTION"."PI_NAME") like upper(:TEXTEINGABENAME||"%")';
else
if :TEXTMITGLIEDSNUMMER is not null then
My_select:='SELECT
"TB_ADRESSE"."A_PLZ" "A_PLZ",
"TB_ADRESSE"."A_ORT" "A_ORT",
"TB_ADRESSE"."A_ID" "A_ID",
"TB_PERSON_INSTITUTION"."PI_MITGLIEDSNUMMER" "PI_MITGLIEDSNUMMER",
"TB_PERSON_INSTITUTION"."PI_NAME" "PI_NAME",
"TB_PERSON_INSTITUTION"."PI_VORNAME" "PI_VORNAME",
"TB_PERSON_INSTITUTION"."PI_ERGAENZUNG" "PI_ERGAENZUNG",
"TB_PERSON_INSTITUTION"."PI_ERGAENZUNG1" "PI_ERGAENZUNG1",
"TB_PERSON_INSTITUTION"."PI_ID" "PI_ID"
FROM
"TB_ADRESSE" "TB_ADRESSE",
"TB_PERSON_INSTITUTION" "TB_PERSON_INSTITUTION"
WHERE "TB_PERSON_INSTITUTION"."PI_ID" = "TB_ADRESSE"."A_F_PERSON_INSTITUTION"
AND upper("TB_PERSON_INSTITUTION"."PI_MITGLIEDSNUMMER") like upper(:TEXTMITGLIEDSNUMMER||"%")';
end if;
end if;
return My_select;
end;
When I try to apply changes an error message occurs:
"Query cannot be parsed within the Builder. If you believe your query is syntactically correct, check the ''generic columns'' checkbox below the region source to proceed without parsing. The query can not be parsed, the cursor is not yet open or a function returning a SQL query returned without a value."
Regards,
Mark

Profit center report with cumulative local currency amount

Hi,
I am working to create a report with cumulative local currency .,so that the report data should tally with GL account balance (FS10N).
This report is for balance sheet accounts . Whenever we used to create report with either report painter or drill down report, the option for defining key characteristics is showing only the profit center currency, company code currency or transaction currency.No option for cumulative local currency.
Thanks,
Anitha

Hi Srinu
RPC0 applies to CC reports and not PCA reports
I am surprised by your statement that Summary reports derive values based on Current Fx rate
GLPCA and GLPCT are the tables that are used in line item and Summary reports.. check the value in GLPCT and do they match with GLPCA or not
I am still not convinced about your issue.. Why do you need currency conversion in report?
Assume your comp code curr is USD and Cont Area curr is EUR.. You will be able to see all reports in both currencies without any conversion required during report execution. This is because all the transactions are recorded in these two currencies
Ensure that the All Currencies indicator is turned ON for your contr area
Br. Ajay M

Crystal Report with subreports breaks when running on different databases.

HI there
I have a report with 5 subreports on that only works on the database I am designing it on. As soon as I run the report through my application on a database different to the one I design on, it seems to have lost all the parameter fields I created in one of the subreports (the one I have just added, the other 4 work fine) used to link to the main report.
It then pops up with the Parameter Value box and asks for values for 2 parameters that I do not use to link to the subreport, nor have added to the subreport in design time, and in code when I step through the parameterfields list property, the parameters I added in design time to the subreport are not in the list but somehow these 2 parameter fields have been added to the subreport? These 2 parameters have the same names as some main report parameters which have been set already, but as mentioned these somehow now belong to the subreport.
When I run the report through my app on the database I design on all parameters are present and the report works fine.
The parameters in the subreport are all command parameters, linking to a command field, a formula field and another non-command parameter in the main report. All these are set and work fine in the main report.
I set all the parameter values in code to the main report, and the subreports all use those to link to.
I am using CR v10.2 with VB2008 using .NET 2.0 framework (although I had similar problems in VB2005), where the report links directly to a SQL databse via commands. There are 4 commands in the main report and one in the problematic subreport. The subreports command incudes a SQL "IF" statement based on one of the parameters I am linking from the main report.
Please let me know if more info is required.
Thanks.

Hello, Eugen;
I understand you are using Visual Studio .NET 2008 with bundled Crystal Reports Basic for 2008 (10.5). Do you have a full version of Crystal Reports you use to design reports with or are you designing inside Visual Studio .NET?
I would like to suggest some ways to test and narrow down the issue.
One subreport appears to be changing the parameters used when the underlying database changes. Is there a change in the Command it is based on?
Create a simple report using the same command and the same database as is used in the problem subreport. Run it to confirm you get the same data as in the original.
Now in design, go into Database|Set Datasource location and change to the new datasource. Do a Database|Verify database. Do you see the change in parameter fields you are seeing at runtime? Has the Command changed? Does it run through the application?
If you see the same change there, it will have to be addressed in the designer first. If it runs well there, let us look further at the application.
What is the order of your code?
   Open main report
   Logon to database
   Pass parameters
   Open each subreport
   Logon to the database
   Pass parameters
   View the report.
Do you set all database locations before passing parameters?
Were any of the parameters created as "NULL" in the designer?
Once I have the answers to these questions we can look a little further.
Elaine

Reports with more than 100 columns

I am using Apex 3.2. I am using a classic report with more than 100 columns. So to use the custom heading in the report, I exported the page,did modification in exported sql file and imported back.
But when I am passing the parameters from a input screen for the first time either it is showing the all data avilable in the database or with only header. If I do the refresh in input screen and try it then it is working as intended. I am updating at the below loaction of the page.Let me know if I have to update anything more in the sql file.
declare
s varchar2(32767) := null;
begin
s := null;
wwv_flow_api.create_report_columns (
p_id=> 200100535534034253 + wwv_flow_api.g_id_offset,
p_region_id=> 2003453533453 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_query_column_id=> 157,
p_form_element_id=> null,
p_column_alias=> 'XYZ',
p_column_display_sequence=> 157,
p_column_heading=> 'XYZ 123',
p_column_alignment=>'LEFT',
p_disable_sort_column=>'Y',
p_sum_column=> 'N',
p_hidden_column=> 'N',
p_display_as=>'WITHOUT_MODIFICATION',
p_pk_col_source=> s,
p_column_comment=>'');
end;
/

Hi,
Its just a general thought and I realize you know your application and user community better I do, but do you think your users are going to be very happy when they are presented with a report with more than a hundred columns? Have you considered maybe presenting the data in some sort of rolled up form from which the user can then drill down to the data they are particularly interested in. Also, I'm sure your LAN administrator would be happy not to see 100+ column by x number row reports being regularly shipped across the network.
Also, 100+ column reports suggests tables with 100+ columns which are probably not designed in a very relationally compliant way. I find that good DB design usually results in applications that have to make less compromises, such as hacking export files in order to fool the API into making ridiculous, unsupported and unsupportable compromises.
Just a thought..................
Regards
Andre

Print same report with different watermark

i want to print the one report with different watermark
means suppose we generate the report and print the 10 copy of the same report but want 4 copy with one watermark and 6 with different watermark.
i have the number of watermark copy in the table .
pls give me the solution
regards
anurag

Thank you for your helpful response. What I am really asking is this -- when there is a CR2008 report based on db1, table1, and you want to use the SAME report with an identical table in a DIFFERENT database (db2, table1), can I easily use the same report? Or, do I have to generate another version of the report?
Thank you again.
David

Library develop report with report painter in Cost Center Accounting

Dear experts!
Now, I'm getting some issue about finding library for developing report with report painter.
Really, i don't know libraries that are used to develop report with report painter for Cost Center Accounting.
Can tell me about them?
Help me, please.
Best regards, Huy

Hello Huy,
CCA reports would be based on table CCSS, you can go to transaction GRR2 and check the various libraries listed there and find a suitable one. You can also use libary 1AB which contains the various cost center variance reports or you can use transaction GR21 to create your own library.
Kind Regards // Shaubhik

Report with spreadsheet as desformat opens very slow

Hi All,
Greetings.
We have an xls file which was generated by report runtime.
This xls was created with option desformat=spreadsheet in report
runtime. The problem is it takes considerably long time to open.
More than 5 minutes for a file with 6750 records.
-------scenario
create a rdf report file, say test.rdf.
run test.rdf using SRW.run_report(myPlist)
with option for desformat=spreadsheet.
and DESNAME=abc.xls
the report runs fine and creates an xls file with 6700 records.
open excel application.
open abc.xls
opening abc.xls is painfully slow.
any ideas/suggestion?
thanks in advnace,
-Jafer

hi all,'
Sadly oracle suggested that,
spreadsheet format is not to be used for running reports with large records,
its meant to be used only for small reports.
The reason is report server adds tags to xls report generated using spreadsheet format.
There is a workaround for this issue, if opened in excel application and saved as
excel , the new file looses all the tags but keeps the format.
so it reduces to 1/5th of acutal size and opens quick.
cheers,
-J

Publication for Deski report with multiple data providers

Hi,
Has anyone been able to get a publication working that uses a Deski report with multiple data providers as the source? I'm trying to get a publication working that uses dynamic recipients and personalization. When I try to schedule the publication, I get the error "Object not found".
Thanks,
Debbie

Debbie,
That's standard.
It's useful for emulating outer joins in reports.
Say you've got a sales report where you want to display all 12 months of the year in a crosstab whatever month you run in.
We're only in May at the moment though. With one data provider (SALES), you'll get a crosstab with just up to May for your months.
If you create a separate data provider called MONTHS to return the months in the current year, you will then have a merged dimension of YearMonth in both.
In your crosstab if you just use YearMonth you'll get just the five months. If you qualify it with its data provider name (in our case MONTHS), you'll see the full twelve months shown.
I hope that clears it up for your.
Regards,
Mark

Using the submit report

Hi,
can any one help me out how to get the output from a report by using the submit report . with out disturbing the report sequence of the calling programme
ie need to capture the output of a report in back ground and use the output in the calling report with out any calling screens or stopping the report sequence,,,,,,,,,,,,
ThankX in advance...............

Hi Siva
do it like this
Construct job name
PERFORM job_name USING v_text
v_vsg
CHANGING v_jobname.
Open job
PERFORM job_open USING v_jobname
CHANGING p_jobcnt.
Submit Job
SUBMIT RLKOMM40
WITH p_warehno = warehouse number
WITH p_group = group
VIA
JOB v_jobname NUMBER p_jobcnt
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
WITH immediately = space
WITH keep_in_spool = 'X' AND RETURN.
*& Form job_name
text
FORM job_name USING p_v_text
p_v_vsg
CHANGING p_v_jobname.
CONCATENATE p_v_text p_v_vsg INTO p_v_jobname.
CONDENSE p_v_jobname.
ENDFORM. " job_name
*& Form job_open
text
FORM job_open USING p_v_jobname
CHANGING p_p_jobcnt.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = p_v_jobname
IMPORTING
jobcount = p_p_jobcnt
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " job_open
Do Reward if helpful.
Regards
Azad.

Goods Receipt Report With 101 movement type using bapi_goodsmvt_create

Dear Abapers,
i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
bapi_goodsmvt_create and data should upload through excel sheet.
still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
What are all the inputs i need to take and please give some valuable inputs to me.
please do help ..... thanks for advance..
Thanks & regards,
Vinay.
Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

Dear Abapers,
i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
bapi_goodsmvt_create and data should upload through excel sheet.
still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
What are all the inputs i need to take and please give some valuable inputs to me.
please do help ..... thanks for advance..
Thanks & regards,
Vinay.
Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

How to create a report with data using the Crystal Reports for Java SDK

Hi,
How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats. I can create my own report through the following code snippet:
ReportClientDocument boReportClientDocument = new ReportClientDocument();
boReportClientDocument.newDocument();
However, I cannot find a way to add data elements to the report without specifying an RPT file. Is this possible? I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
is there a way to do this through these packages?
com.crystaldecisions.sdk.occa.report.data
com.crystaldecisions.sdk.occa.report.definition
Am I forced to create a RPT file for the different table and column structures I have?
Thank you in advance for any insights.
Ted Jenney

Hi Rameez,
After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser. I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
<%
try {
            ReportClientDocument rcd = new ReportClientDocument();
            rcd.newDocument();
// Setup the DB connection
            String database_dll = "Sqlsrv32.dll";
            String db = "qa_start_2012";
            String dsn = "SQL Server";
            String userName = "sa";
            String pwd = "sa";
            // Create the DB connection
            ConnectionInfo oConnectionInfo = new ConnectionInfo();
            PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
            // Set new table logon properties
            PropertyBag oPropertyBag2 = new PropertyBag();
            oPropertyBag2.put("DSN", dsn);
            oPropertyBag2.put("Data Source", db);
            // Set the connection info objects members
            // 1. Pass the Logon Properties to the main PropertyBag
            // 2. Set the Server Description to the new **System DSN**
            oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
            oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
            oPropertyBag1.put("Database DLL", database_dll);
            oConnectionInfo.setAttributes(oPropertyBag1);
            oConnectionInfo.setUserName(userName);
            oConnectionInfo.setPassword(pwd);
            // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
            oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
// Add a Database table
          String tableName = "Building";
            Table oTable = new Table();
            oTable.setName(tableName);
            oTable.setConnectionInfo(oConnectionInfo);
            rcd.getDatabaseController().addTable(oTable, null);
    catch(ReportSDKException RsdkEx) {
            out.println(RsdkEx);
    catch (Exception ex) {
          out.println(ex);
%>
Throws the exception
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
          String tableName = "Building";
            String fieldname = "Building_Name";
            Table oTable = new Table();
            oTable.setName(tableName);
            oTable.setAlias(tableName);
            oTable.setQualifiedName(tableName);
            oTable.setDescription(tableName) ;
            Fields fields = new Fields();
            DBField field = new DBField();
            field.setDescription(fieldname);
            field.setHeadingText(fieldname);
            field.setName(fieldname);
            field.setType(FieldValueType.stringField);
            field.setLength(40);
            fields.add(field);
            oTable.setDataFields(fields);
            oTable.setConnectionInfo(oConnectionInfo);
            rcd.getDatabaseController().addTable(oTable, null);
This code succeeds, but it is not clear how to add that database field to a section. If I attempt to call the following:
FieldObject oFieldObject = new FieldObject();
            oFieldObject.setDataSourceName(field.getFormulaForm());
            oFieldObject.setFieldValueType(field.getType());
            // Now add it to the section
            oFieldObject.setLeft(3120);
            oFieldObject.setTop(120);
            oFieldObject.setWidth(1911);
            oFieldObject.setHeight(226);
            rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
Then I get an error (which is not unexpected)
com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
How do I add one of the table.SetDataFields() to my report to be displayed?
Are there any other pointers or suggestions you may have?
Thank you

Use of 8D Report with QM

Similar Messages

Maybe you are looking for