Use of filters in views

Hi,
I'm trying to do something but I don't even know if it's possible, since I haven't found anything on the forum/internet...
I have a report, but I want to use two different views in the dashboard, one of them must be filtered.
For example, I have a report with all the data of 12 months. In one of the views, I have a graphic with these 12 months, but I want another view with just the last month. Is that even possible or does it make sense???
Thanks in advance!!

Deepak Gupta wrote:
Use combine with similar request, one view showing all month values and second view using pivot view having calculated item to show just one month data and rest all hidden.
Veru much possible. I m using itDeepak, I have the requests combined, one with several months, and the other request with only one month. However I can't find the way to filter in the pivot table to show just one of the requests... how do u hide the months you don't want to see?
thx.

Similar Messages

Error while Driving a view using parameters from other view

Hi,
I have created a report with streamlist and Barchart view.Driving option is used in streamlist to drive the barchart. The driving works well untill i dont use any filters in the Streamlist.Once i use parameters in streamlist , the driving works only for the default values set.When Second set of values are chosed for the parameter,the values are displayed correctly , but once they are selected for driving,the current values are replaced by the results of the default parameter settings.
I have already done the tutorials for driving and it worked well untill i use filters in the main view,from where the driving is done.
I would really appreciate if someone could give a solution for this problem.
Regards,
Lathika

Hi,
Login as i.e. sys as sysdba. Standard password is change_on_install.
Or you can login in using user that has CREATE VIEW WITH ADMIN OPTION and then grant CREATE VIEW privilege to user to want.
Peter D.

Problems in creation of workbook using Change query local view.

Hi Experts,
I have created a Multiprovider by using union of two infocubes and created a Query based on Multiprovider. I want to restrict one infocube in Change Query local view for creating new workbooks. In Query global view we drag and drop the Infocube under Filters, but in the Query local view Filter panel is in disable mode. (My requirement is to create the workbooks using change query local view only)
How can I restrict the one Infocube values in the workbooks by using Change query local view?
Thanks in advance.
Venkat.

Hi Venkat Prasad
As you told that the query is on multi provider and the view is not allowing to declare/define filter value
Just drag the infoprovider info object avilable under packet dimension to rows and right click on it restrict by selecting the name of the info provider when u right click it will show you the option of restrict once u click on it,it will takes to u a pop up where you can able to see the name of info providers and you specify according to it and finally in the display of results if you dont want to to display the info provider name then just right click on the 0infoprovider object under rows go to properties then choose hide option under display.
Hope its clear a little..!
Thanks
K M R
**Assigning points is the only way of saying thanks in SDN***
>
venkata prasad wrote:
> Hi K M R,
>
> Thanks for ur quick response. Most of the Infoobjects are common for both infocubes. I didn't understand this sentense "retrict the value with the infoprovider which values you are trying to view".
> Please explian elaborately how to restrict the values speicfic to infoprovider under rows.

How to Increase the retreving size of instances using PAPI filters.

Hi,
How to Increase the retreving size of instances using PAPI filters.
In my engine database instance size exceeds 2500 then we are getting following exception.
If we login in to user workspace able to see the instances but while trying to retrieve from PAPI getting below exception and showing the user's inbox aize as 0.
In Process Admin console we set all the required parameters.
Still I m getting the same problem.
Can you please lgive mev the solution.
<Mar 23, 2010 8:58:24 PM SGT> <Warning> <RMI> <BEA-080003> <RuntimeException thrown by rmi server: fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.getInstancesByFilter(Lfuego.papi.impl.j2ee.EJBSecureEngineInfo;Ljava.lang.String;Lfuego.papi.Filter;)
java.lang.ClassCastException: cannot assign instance of java.util.HashSet to field fuego.view.FilterImpl.attributes of type java.util.List in instance of fuego.view.FilterImpl.
java.lang.ClassCastException: cannot assign instance of java.util.HashSet to field fuego.view.FilterImpl.attributes of type java.util.List in instance of fuego.view.FilterImpl
     at java.io.ObjectStreamClass$FieldReflector.setObjFieldValues(ObjectStreamClass.java:2032)
     at java.io.ObjectStreamClass.setObjFieldValues(ObjectStreamClass.java:1212)
     at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1953)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
Regards,
Bharath.
Edited by: bg57295 on Mar 24, 2010 6:45 PM

Hi Bharath,
Believe me, you have an incompatibility between different build#.
PAPI has an instance cache. When certain process has more instances than the maximum specified, the cache is switch to status OPEN. That means, that PAPI will not be able to resolve some instance queries using the information in the cache. When that occurs, PAPI forward all those queries to the engine.
The incompatibility introduced is in the communication between PAPI and Engine. So, you only get the exception when you have more instances than the maximum cache size.
Regards,
Ariel

RSCRM_BAPI removing filters of View for File Extract execution.

Hi folks,
I m working on BI 7.0.
I have a view , which has poor performance, as query based on DSO , I want to execute the view in background with a variant.
I created an extract using a variant In RSCRM_BAPI.
But in output i can see only those values.. same as in output when i saved View .
On filter button in RSCRM_BAPI ,
there are sum active filters on view.. which filter out the data and not considering the Variant i provide..
If i make them inactive in RSCRM_BAPI. it doesnot allow to save the view
and hence the Extract is not working
Has anyone worked on similar scenario ?
Thanks..
Sonal....
Edited by: Sonal Patel on Dec 18, 2009 1:55 PM

Hi,
You can run it in background using RSCRM_BAPI, but you need to maintain Customer Exit/SAP Exit variable/Constaants for all Variables, Bcoz it will run in background so the selection screen need to fill automatically.
Re: Running Quaries automatically and saving them in as a Excel file in Server
Re: Data transfer to external systems
Re: Loading from a Custom R/3 Table
Re: How can I schedule my Bex report to execute in background
Re: How can I insert the RSCRM_BAPI into Process chain?
Thanks
Reddy

Possible to use list filters to filter library?

Hi-
We have a library of documents, and want to add XLS to how it displays for end users. However, doing so means we can't use column header filtering.
so, we tried to use List filters (as ugly as they are), but they will not allow us to connect to the web part showing the documents.
Has anyone been able to use OOB functionality to add one web part (EG, sharepoint list filters) to filter a document library display?
thanks.
Barbara Selden director, Business Readiness 110 Consulting

Hi Barbara,
As I understand, you want to use OOB functionality to add one web part (EG, sharepoint list filters) to filter a document library display.
Could you please provide the screenshot of the SharePoint list filter web part configuration?
You should make sure the SharePoint list filter web part and document library in the same page. When they are in the same page, you could build the connection between them.
Then you could edit the web part to choose the document library in the list section, view and value field. Then create the connection to the document library by clicking connection. You could click the drop-down arrow in the upper-right corner of the SharePoint
list filter Web Part, click Connections, click Get Filter Values From, and then select the custom list.
Then you could enable Server Rendering in the document library web part. You could edit the document library-> Miscellaneous > Enable Server Rendering.
After all you could filter the document library.
The article below is about how to connect a SharePoint List Filter Web Part to a Data View Web Part.
https://support.office.com/en-us/article/Connect-a-Filter-Web-Part-to-a-Data-View-Web-Part-bc10362e-afaa-42dc-b09e-ba8b1b83bb3c?CTT=5&origin=HA010033786&CorrelationId=6ed6821e-b67e-4adf-bd83-6ccc18441ec0&ui=en-US&rs=en-US&ad=US#bms5
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to display "All Items" using a "Filtered Rows" Combo Box

Hi
How do I make a Combo Box with "Filtered Rows" show "All Values" by default, AND have the option to select individual filters?
If my data was
North
South
East
West
I would want the Combo box to display
ALL
North
South
East
West
When the user selected:
North, they should see just the filtered rows with North
South, they should see just the filtered rows with South
ALL should be the default, and it should ifilter/include North, Soutn, East and West (i.e. showing all the rows)
I need to use a Combo box and Filtered Rows, because I actually want to filter my dataset using multiple columns:
Company, Region, District, Sector, Value
My current method is to:
use a Combo to filter the RawData on Company into an Intermediate_Company worksheet
use another Combo to filter the Intermediate_Company worksheet on Region into an Intermediate_Region worksheet
use another Combo to filter the Intermediate_Region worksheet on District into an Intermediate_District worksheet
use another Combo to filter the Intermediate_District worksheet on Sector into an Intermediate_Sector worksheet
then display in a List View from the Intermediate_Sector worksheet.
Any comments on this method would also be welcome.
Thanks for your help
Stuart

Thanks Muwa
I've uploaded a non-working version here: http://www.teradepot.com/ntxgoo6629zi/Simple_All_Combo.xlf.html
I've figured out how to use tthe filter to copy a subset of the rows in the source date to the destination are of the worksheet.
I can't figure out how to use a filter to copy ALL the rows in the source to the destination.
I've seen hints about using hidden filters, but I can't make this work, either. It's quite depressing, really
I'm very grateful for any help you can give.
Thanks in advance
Stuart

Hiding a column used in the custom view!

Hello! I would like to find out if there is any way to do the following: I have a view based on a table (Configuration Manager - Views). I specified to display 4 columns to show up in the View, so that we can modify the columns without going into the Database. In the "Default Display Expression" entry on the Info tab of the view, I've specified how these columns should be displayed on the UI. My problem: I don't want to display the fourth column on the UI at all, but I want this column to still be accessible by administrators via the view! Is it possible to specify somehow NOT to display this column, but still use it in the view? Thanks for the suggestions! Anya

Hello! I've actually created a separate view just to hide this fourth column, and we will be using this for the administration (relates to your point b). However, someone had asked not to use so many views! Do you know of any problems if several views are being used for the same table? In our case some tables have up to 3 views already. We use this view for the Metadata field, but the Metadata field is an option list (or controlled vocabulary in our terms). To enable more user-friendly selection, we are using DHTMLX Grid (dhtmlx.com) to display values in the View. The grid is displaying all columns from the view, by default! (Perhaps I need to check if I can somehow customize the Grid - however, I was hoping to do this from the View itself) Thanks!

How do I use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?

We are attempting to use SharePoint 2010 in combination with Exchange 2010 to implement shared calendars and contact lists throughout our organization. We are able to connect the lists to Outlook 2010, but have been unsuccessful in viewing
the calendars and contact lists from our mobile phones. How do we use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?
In trying to answer this question, we have come across a few different possibilities, all of them falling just short of a long term solution for us. After doing research, we found that Active Sync will only show the default folders of the account. To
solve this, we downloaded an Add-In for Outlook (CodeTwo FolderSync) to synchronize folders and synchronized our SharePoint list with a new Contact list in the default folder. The issue we came across with this method is that the Add-In we are using
is not capable of automatic synchronization. There is a button and it must be clicked after every update is made, which is not ideal for our solution. We then went to the company (CodeTwo) and found server side software (Exchange Sync) that they
offer which will automatically synchronize the folders. After installing that on the Exchange Server, we now are running into the issue of not being able to locate the SharePoint lists on the Exchange Server.
Does anyone happen to know how we can get to the SharePoint lists from the Exchange Server? Has anyone else been able to use shared contacts lists and calendars from SharePoint on their mobile phones using Active Sync? If so, are we in the right
direction with what we have found so far?
Thanks,
Brad

You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
Use Microsoft SharePoint Workspace Mobile
http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
iPhone SharePoint Apps Shootout
http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx
Comparing SharePoint iPhone Apps
http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
MCTS: Messaging | MCSE: S+M

How do I use the option "table view" in NetWeaver 2004s Query Designer?

Dear,
We have used NetWeaver 2004s Query Designer, We found a strange problem. The option to select table view is not available. It is greyed out. How can you select table view (tabular) in 2004s Query Designer?
I have read the help doc about tabular view of NetWeaver 2004s Query Designer, I check my query, it has only one structure . but the option is still greyed out. I rebuild the query with 3.x Query Designer in tabular view, and reopen it with 2004s Query Designer, So there is a tab named "tabular view" display, but the option to select table view is still not available, and when users view the query result in web , it is still not in tabular view display. So I am confused, is there a bug with NetWeaver 2004s Query Designer?
Please help me. Thanks!

Note 1002271. Seach this note to use key word "table view"

Using Google Maps Street View on My MacBook Pro

Recently, I have been getting "Plug-In Missing" in the place of a video in a blog post. Also, when I try to use Street View in Google Maps I get a box that tells me I need to install Adobe Flash Player 10 or later to be able to use Street View. Should I try to download and install Adobe Flash Player? What could I use to be able to use Google Maps Street View and/or to play videos?

I found my reply elsewhere - you have to uncheck "contacts" and then recheck it. Kinda idiotic, but there you have it!

Deskjet 3050 J610 Wireless Setup Problem - Thinks I'm using MAC filtering

I just got an HP Deskjet 3050 J610 from my parents, who have never used it. The ink cartridges were still in their wrappers. Trying to set it up tonight, and everything was going well until I tried connecting it to the wireless network.
My router does not have WPS, so I'm having to do this via USB. The software is able to detect my router's SSID, encryption type, and password. However, when trying to connect the printer to the router, it fails. The Wireless Network Test Report claims that it might be because of MAC address filtering. I double checked my router settings, and I am NOT using MAC filtering at all. I have not yet tried rebooting everything (Printer, laptop, router), but I am doubtful that will resolve the issue. For security reasons, I would prefer not to say what security I'm using, but I will say that it IS supported by the printer.
I'm using Windows 7 on an Asus laptop, and my ISP is Verizon Fios.

Hi Manjunath, I spent the last hour on that site. Everything I found was about how to add the printer's MAC address to the router's filter settings. But I repeat, I am NOT using MAC filtering on my router, but the printer thinks I am.
Or rather... THOUGHT I was.
Rebooting the printer and the router helped. Of course, I did both at the same time, so I'm not sure which one was required, or both, but the long and the short of it is, it works now.

GET_FILTER_VALUES_CHA:3 Error when using the Filters

Hi All,
I get the below error messgage when trying to use the Filters in the web application. I checked the OSS notes (932154, 902393 & 832485) but didn't get a solution. This is a query on a Basic Cube.
SQL 904.
Error in SQL Statement.
SYSTEM ERROR CL_RSR_WWW_RENDERER and form space GET_FILTER_VALUES_CHA:3
Looking forward for some help in this regard.
BW Version: 3.5 SP15
Thanks & regards,
Sree

Hi,
It worked for me, I dont for your case.
Mine syptom:
When filtering by using the context menu's "keep filter" and then filter by using a "Hierarchy Web Item" (based on Calendar month),
then I was getting the message <i>"System error in program CL_RSR_WWW_RENDERER and form SUBMIT_FILTER"</i>
It is solved by adding a "Filter Web Item" to display the filter values. If you dont want that object in your report, you can hide it.
Vasso

Using Metadata to generate view as conventional folder structure

Can Metadata be used to generate a view as the conventional folder drill-down?
I have a list with metadata for different projects, releases, content type etc and I would like to view them in folder structure with different hierarchies, i.e. using projects--> releases--> content-type as well as release --> projects --> content-type.
I have asked the same question at : http://stackoverflow.com/questions/22693036/using-metadata-to-view-as-conventional-folder-structure

Hi,
If your metadata is based on a hierarchical term set you could use ‘Metadata Navigation’.
You may have to change your information architecture a bit to accommodate this approach. More info on ‘Metadata Navigation’ here:
http://office.microsoft.com/en-gb/sharepoint-server-help/configure-metadata-navigation-for-a-list-or-library-HA101820113.aspx
Hope this helps
Cheers
Matt

When using Message Filters on an IMAP account I often get duplicate messages in my local folder where important messages are put. How can I stop this?

Since switching to IMAP and using message filters, I often get duplicate messages in my local folders. I think this is a bug.
That is my guess as to what is happening.
When the IMAP part starts syncing with the server to fill in the inbox, the message filter system starts working before it is done syncing. I appears that the filters runs too quickly because as the filter moves a msg to a local folder, the sync thread think it need to download it again from the server. If the sync with the remote server takes a long time, I could end up with 5 or more copies of the exact same email.
This has always happened for years now but I figured someone would have noticed it and fix it by now. Now I am wondering it it has something to do with my filters or my settings.
Has anyone run into this before?

Toys,
I was just doing a search to see if anyone else was feeling this way! I am also at a university and I don't really like see thousands of unread messages in mail. (Fortunately, with Leopard you can select the dock icon to show only the messages in your inbox but I still don't like having the public folder in there).
Please let me know if you find out anything and I will do the same for you. If I have time later I am going to run by our IT office later and ask them.

Use of filters in views

Similar Messages

Maybe you are looking for