Use of JTAPI in Caller ID
Hello all, I'm doing a Computer Science degree, and my topic for this semester's programing project is Caller ID Management. I'm supposed to implement a call-logging software in Java, and JTAPI seems like a ready solution, but the problem is, I'm not quite sure how to use it, and my lecturers are clueless. I was told to use a caller ID-enabled 56K modem for my project, and I'm lost.
I've been doing some research on how caller ID works from phone to phone, and I've read how it works, from what meagre sources I can find on the net - emphasis here on the ASCII format for the CND message, and the format of the protocol used.
My questions are as follows:
1) Will I be able to use JTAPI for my project? I know it's written on the JTAPI page that it can be used for call-logging, but I'm going mad trying to finish going through all the specifications provided on this site, and I'm still not even sure which package I should be looking at.
2) If the caller ID is going to be from phone to pc, do I have to be directly worried about the protocol, and the format & content of the received data messages, or will the JTAPI methods deal with that internally?
Unrelated request:
If anyone has any good sites or documents on implementing Caller ID (preferably as detailed as possible), I'd be grateful if you helped me out abit. I've only managed to find two pages of something helpful: most of the info on Caller ID is too superfluous to be of any help.
Thanks for your help! :)
Hi
When I was trying to compile Outcall and Incall sample code from sun website I found this error:
"Can't get Provider: javax.telephony.JtapiPeerUnavailableException: JtapiPeer: DefaultJtapiPeer could not be instantiated."
If you can give me a sample code that you know it will work or you know any changes needed to this sample code plz say to me, I would be glad that you give me a code that you are sure about that because I am new in JTAPI
Similar Messages
-
Is there a CUCM API which can be used to see what calls are in progress?
Hello All,
I am trying to build a basic monitoring application which will display a list of calls in progress along with endpoint information such as IP address etc
Is there a CUCM API which can be used to see what calls are in progress?
Thanks
MattMatt,
It looks like another person had a similar question before, see the following thread:
https://supportforums.cisco.com/discussion/9697836/can-use-axl-or-other-api-get-calls-progress
Also, according to the comments seen on that post, I was able to find the JTAPI developers guide, see more information below:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/jtapi_dev/8_6_1/jtapidevguide/overview.html
If this still does not satisfy your question then, the best you can do is post this inquiry on the Cisco Developer Network on the following link:
https://developer.cisco.com/site/devnet/home/index.gsp
Hope this information helps,
Marco Rojas. -
Jabber for Window, phone mode, how to disable "use my computer for calls"
We have a Citrix environment and only want to control the Cisco deskphone with Jabber for Windows in the phone mode.
We use CUCM 8.6.2 and I have installed Jabber for Windows 9.7.0 and all works fine, I can control my deskphone, make and receive calls, phonebook and Outlook integration works fine.
Is it possible to disable "use my computer for calls" as we do not want users to make calls via Citrix, but only use the deskphone for this.
Thanks, PerryHi Matthias,
Soft-phone mode cannot be disabled. Supported Features on Virtual Environment are the following.
Supported Features
Instant messaging and presence with other Cisco Jabber clients
Desk phone control
Voicemail
Presence integration with Microsoft Outlook 2007, 2010 and 2013
We have an existing defect which is in Terminated state because feature is not supported hence cannot be fixed.
CSCub40605 - J4W - Ability to disable softphone mode in Citrix environment.
HTH,
Please rate if you find this post helpful.
Regards,
Mohammed Noor -
Unable to select 'Use Phone for audio calls' on Cisco Jabber Client 9.6 for Windows
Hi,
I have recently deployed Cisco Presence Server and integrated with Call Manager 9.1.2. I have successfully deplyed 6700 users on IM & Presence. Some of the users requested for Cisco Jabber with phone control.
I have added CFS client on the Call Manager and associated it with the same extension numbers from their desk phones. I am currently able to make audio and video calls for these specific users. I am currently using Cisco Jabber Client 9.6 for windows. I have users both daisy chained to their desk phones and who are not. Can you please confirm if it does make any difference.
Problem Faced -
I am not able to use to option use phone for audio calls. The phone comes down with a cross sign on it. At the same time Cisco Jabber by default uses the client and it works as expected.
Can you please let me know if any of you guys have faced a similar issue.
Please let me know if you need any information regading the configuration used.
Looking forward for your valuable comments.
Thank you.
Regards,
Joseph Chirayath.Hi Will,
I am attaching the screen shot for the END USER on CUCM 9.X that has been configured on Cisco Jabber.
Please do let me know if you need any further information.
Thank you. -
if i used the same apple id and email to set up both my ipad and ipod what can i do to be able to use face time to call from one device to the other
They can share an Apple ID, but each device must use a different email address when setting up FaceTime. Create a gmail email (or hotmail, or ...) address and use that on one of the devices when you setup FaceTime.
You don't actually have to use the 'new' email address, it is probably just used as an index to reference the correct device when initiating a call via the FaceTime server. -
So my I phone 4s volume has decided to pack allowing only my phone to make sounds when I have an incoming call, I can also here fine using facetime and receiving calls. YouTube, soundcloud, any of I players will no longer play sound. I've restored the phone using iTunes on my laptop and checked all the volumes are turned up and the button at the left hand Side of the phone is in the correct position.
Try inserting and re-inserting your headphones 7 or 8 times. Also try cleaning out the headphone jack in case of debris that might be interfering with the connection/disconnection.
-
I use a web site called ACRIS- it allows me to access NYC Finance dept records- specifically images of deeds. Up until yesterday I had no problem. Then without any apparent reason I could access all parts of the site, but could not access the deed images. First I thought it was a problem on their end, which sometimes happens, but after waiting 24 hours I was still having the problem. Then I tried windows explorer and it worked without any problem. How do I fix this?
Hi jeffbeal,
First question I would ask is what has changed recently? Did you add any new extensions or add-ons?
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps! -
Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$
-
Unable to use the video or call feature on Live Messenger version 2009
Since installing version 2009 I am not not able to use the video or call feature. I am getting the below messages.
1)Your computer does not have a sound card, or a sound card is not selected.
2)Messenger is not available right now. Please try again later. (0x8ac70004)
3)Unable to run audio or video setup from Live messenger
My Laptop is a Toshiba Satallite A105-S4334 model.I am using Windows XP 2002, SP3.What must I do to correct this problem?Hi abyfate,
Thanks for visiting Apple Support Communities.
You may find the steps in this article useful for troubleshooting your cellular connection:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Regards,
Jeremy -
Illegal use of nonvirtual function call
I'm trying to run this program....
import java.io.*;
import java.util.*;
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
import sun.net.nntp.*;
import lotus.domino.*;
public class WriteNewsFile implements Constants{
private Store store;
private Database db;
public Store createNNTPConnection(String host, String protocol) throws Exception{
// Create empty properties
Properties props = new Properties();
// Get session
javax.mail.Session session = javax.mail.Session.getInstance(props, null);
// Get the store
Store store = session.getStore(protocol);
store.connect(host, null, null);
return store;
public Vector getForumNames(String root) throws Exception {
Vector result = new Vector();
NntpClient nc = new NntpClient(NNTP_HOST);
String line;
nc.serverOutput.println(NNTP_COMMAND_LIST_ACTIVE);
BufferedReader br = new BufferedReader(new InputStreamReader(nc.serverInput));
while ((line = br.readLine()) != null) {
if (line.equals("."))
break;
if (line.startsWith(root)) {
result.add(line.substring(0, line.indexOf(" ")));
nc.closeServer();
return result;
private void init(String root) throws Exception {
Vector forums = getForumNames(root);
for (Enumeration e = forums.elements(); e.hasMoreElements();) {
System.out.println(readWriteNewsgroup((String)e.nextElement()));
System.gc();
public static void main(String args[]) {
WriteNewsFile wns = new WriteNewsFile();
try{
wns.db = wns.openNotesDB(DOMINO_HOST, DOMINO_USER, DOMINO_PASSWD,
DOMINO_DB);
wns.store = wns.createNNTPConnection(NNTP_HOST, NNTP);
//wns.init("forums.software.");
wns.init("forums.hardware.");
//wns.init("forums.services.");
wns.store.close();
}catch(Exception e){
e.printStackTrace();
* Insert the method's description here.
* Creation date: (12/10/2001 9:51:20 AM)
* @param s java.lang.String
public Database openNotesDB(String host, String user, String passwd, String dbName) throws
NotesException {
lotus.domino.Session session =
NotesFactory.createSession(host, user, passwd);
db = session.getDatabase(session.getServerName(), dbName);
if (db == null)
throw new NotesException();
else
return db;
public String readWriteNewsgroup(String newsgroup) throws Exception {
// Get folder
Folder folder = store.getFolder(newsgroup);
folder.open(Folder.READ_ONLY);
// Get directory
Message messages[] = folder.getMessages();
for (int i = 0, n = messages.length; i < n; i++) {
//System.out.println( i + ": " + messages.getFrom()[0] + "\t" +
messages[i].getSubject());
Document doc = db.createDocument();
doc.replaceItemValue(MESSAGE_NUMBER,new Integer(messages[i].getMessageNumber()));
doc.replaceItemValue(MESSAGE_ID, messages[i].getHeader(MESSAGE_ID)[0]);
doc.replaceItemValue(DATE, messages[i].getReceivedDate());
doc.replaceItemValue(FROM, messages[i].getFrom()[0].toString());
doc.replaceItemValue(SUBJECT, messages[i].getSubject());
doc.replaceItemValue(NEWSGROUPS, messages[i].getHeader(NEWSGROUPS)[0]);
doc.replaceItemValue(ORGANIZATION, messages[i].getHeader(ORGANIZATION)[0]);
RichTextItem rtitem = doc.createRichTextItem(BODY);
try{
rtitem.appendText(messages[i].getContent().toString());
}catch(UnsupportedEncodingException e){
System.out.println("Could not convert body to String");
//rtitem.recycle();
if (!doc.save())
System.out.println("Did not save the document");
// Close connections and files
folder.close(false);
return newsgroup;
but getting this runtime error.....
C:\$user\java>java WriteNewsFile
Exception in thread "main" java.lang.VerifyError: (class: com/ibm/CORBA/iiop/Gen
ericServerSC, method: dispatch signature: (Lcom/ibm/CORBA/iiop/IIOPInputStream;L
com/ibm/CORBA/iiop/IIOPOutputStream;)V) Illegal use of nonvirtual function call
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java:134)
at com.ibm.CORBA.iiop.ORB.registerSubcontracts(ORB.java)
at com.ibm.CORBA.iiop.ORB.<init>(ORB.java)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:254)
at org.omg.CORBA.ORB.create_impl(ORB.java:306)
at org.omg.CORBA.ORB.init(ORB.java:355)
at lotus.domino.cso.Session.OREFtoSession(Session.java:703)
at lotus.domino.cso.Session.<init>(Session.java:57)
at lotus.domino.cso.Session.createSession(Session.java:36)
at lotus.domino.NotesFactory.createSession(NotesFactory.java:67)
at WriteNewsFile.openNotesDB(WriteNewsFile.java:88)
at WriteNewsFile.main(WriteNewsFile.java:66)
and don't understand the nature of the error...... Can anyone help or direct me to some information that might help me understand?
Thanks,
Heatheryou have used a method that was implemented in JRE1.2 -- IE's native JVM 1.1.4 or 1.1.5 . You can do one of two things:
1) convert your html file to make it use a new Java plug-in, or
2) change your code to call a comparble method that is available before 1.2
V.V. -
Use 'default' keyword in call string while calling stored proc?
I am calling following sql server stored procedure from java code using my jdbc driver for sql server: CREATE PROCEDURE test_findTbInfo (
@paramIn_Str varchar(10),
@paramOut_Int int OUT,
@paramIn_Int int = 20
AS
begin
set @paramOut_Int = @paramIn_Int * 100
end
If I make a call like this:
CallableStatement cs = conn.prepareCall(" { call test_findTbInfo(? , , ? ) }");
cs.setString(1, "test_tab");
cs.setInt(2, 4);
cs.execute();
It works without any error. But this is not a right behavior. !! The second parameter as you see is passed like an optional parameter. But in stored proc it is NOT an optional param and so if the value not passed it should fail...
Now if I change the code to
CallableStatement cs = conn.prepareCall(" { call test_findTbInfo(? , default, ? ) }");
it works correctly. Gives error that "Procedure 'test_findTbInfo' expects parameter '@paramOut_Int', which was not supplied." which is correct.
So is it a normal practice to use 'default' keyword while calling sql server stored procedures having optional parameters in jdbc ????
Anyone knows ??? As far as I know "call test_findTbInfo(? , , ? )" works fine except in some cases and also it forces users to put all optional parameters at the end of parameter list in stored proc.
Please let me know whether I should go with 'default' throuout for sql server stored proc while calling using my jdbc driver.
Amit{?= call <procedure-name>[<arg1>,<arg2>, ...]}The question mark in the above is the result parameter
that must be registered.
That is not the same as an OUT argument.Yes that is true. The result value and OUT parameters are different but they both MUST be registered as per jdbc API
"The type of all OUT parameters must be registered prior to executing the stored procedure; their values are retrieved after execution via the get methods provided here."
Anyway, my original question still stays as it was. If there are some optional IN parameters in stored procedure
e.g.
PROCEDURE test_findTbInfo (
@paramIn_Int int = 20,
@paramOut_Int int OUT
how do you call this?
CallableStatement cs = conn.prepareCall(" { call test_findTbInfo( , ? ) }");
cs.registerOutParameter(1, Types.INTEGER);
cs.execute();
or
CallableStatement cs = conn.prepareCall(" { call test_findTbInfo(default, ? ) }");
Also note that I am intending to use ONLY sql server driver for this.
The first as well second seem to work. Except that second way is seems reliable. I just wanted a second opinion on that...
Amit -
I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes
Plug the device into the computer.
Select the content desired to sync.
Sync. -
Explain the situation for using ale , bapi ,session ,call transation, di
what is the use of bdcmsgcall,
if any erroe occur in the legacy records how to rectify it?
In what situation we can go for lsmw.
Kindly explain the situation's for using ale , bapi ,session ,call transation, direct input.Hi ashok,
chk this.
the functionality of both idoc and bapi are same.
the main difference in BAPI is it is used for Third party application like JAVA, VB etc.
and IDOC is used transfer data from the SAP to sap or non-sap system.
For details refer the contents below
ALE
ALE is SAP proprietary technology that enables data communications between two or more SAP R/3 systems and/or R/3 and external systems. When a new enterprise resource planning (ERP) solution such as R/3 is implemented, companies have to interface the ERP system with legacy systems or other ERP systems.
ALE provides intelligent mechanisms where by clients can achieve integration as well as distribution of applications and data.
ALE technology facilitates rapid application prototyping and application interface development, thus reducing implementation time.
The ALE components are inherently integrated with SAP applications and are robust, leading to a highly reliable system.
ALE comes with application distribution/integration scenarios as well as a set of tools, programs, data definitions, and methodologies that you can easily configure to get an interface up and running.
BAPI
BAPIs provide a stable, standardized method for third-party applications and components to integrate into the Business Framework. These interfaces are being specified as part of SAP's initiative with customers, partners and leading standards organizations. Also, SAP has implemented the emerging Object Application Group (OAG) specifications with BAPIs.
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Session method is to populate the data by filling BDC structure
and keep as session to process from SM37 to post in appropriate Transaction.
Call transaction method is to post the data directly into the Transaction from an Executable program.
Session method SAP defined Function modules.
U can see more help on the differences in the SAP help.
hope u got an idea.
rgds
anver
<i>if hlped pls mark points</i> -
I am currently in Cameroon, Africa and after arriving here, I added Global services to my plan in hopes to be able to use my phone to call local numbers. When I dial local numbers in Cameroon, with or without the country code, the call fails. I suspect it may be that the phone is 3G and this area only supports 2G. Help!
cctga,
We appreciate you taking the time to reach out to us. I am sorry to hear that you are having trouble while traveling. We definitely want to make sure you have all available options. Normally when traveling internationally we reccommend setting up international services prior to leaving. When you added the services did you do so online or with a rep? It would be best to contact our global department in order to troubleshoot any and all issues with services while international http://vz.to/17KseUf.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport -
International call using another LD provider calling card
international call using another LD provider calling card
last month i used another LD (non-Verizon) provider calling card for one international call. i check my Verizon International calling plan and it says No International Plan Included.
this month March i was shocked to see my bill for one International call for $408.39
this has never happened before. what is happening here ?In efforts to avoid duplicate/cross posting on the forums, this thread has been locked. Please check for responses to your original thread >> HERE
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.
Maybe you are looking for
-
What is the use of Data packet dim with Virtual cube with services
Hi Friends, Could anybody tell me what is the use of Packet dimension in Virtual cube with services , It cannot contain data persistently ,Just fetch at runtime,Then there is no Physical load happening,Then why it should be automatically created for
-
I purchased a new computer that does not have a disc drive. how do i re download my CS6?
i purchased a new computer that does not have a disc drive. how do i re download my CS6?
-
Combo boxes appear in reverse and info cannot be read when selected
Half of my combo boxes appear normal and half appear with the drop down arrow on the right side of the box. the choices, when selected, appear above the arrow and are barely legible. some of the boxes appear perfectly normal and some are like this wi
-
I installed iLife 08 and then the iPhoto 7.01 update. I now find that I have none of my 2007 photos, and they are NOT in the originals folder either. What happened to them? I have looked over all the posts on the new version, buthave not come across
-
Unexpected query results during large data loads from BCS into BI Cube
Gurus We have had an issue occur twice in the last few months but its causing our business partners a hard point. When they send a large load of data from BCS to the real time BI Cube the queries are showing unexpected results. We have the queries