Use of manual sequencing heuristic with consideration of Fixed pegging.
Hi,
I have scheduled the FG and SFG order through optimization for 3 days.To correct the sequence i am using manual sequencing heuristic i.e. SAP003. in the setting i am taking option consider fixed pegging always,scheduling mode as insert operation and scheduling submode as schedule dependent operation according to scheduling mode....But problem i am facing after running this heuristic as some FG orders are getting scheduled before SFG orders and one more problem is orders are crossing the scheduling horizon i.e. 3 days horizon......
Kindly give some input to resolve the issue.
Regards
Pradeepta
Run Fixed peggeing heurstics before running rescheduling heuristic?
Vipul
Similar Messages
-
We are currently on scm 5.1 version. planned orders are generated for a together for multiple sale orders by variable heuristic. start dates will be based on the requirement date of sale order.
suddenly the priority changes. the first priority sale order becomed 2nd priority and the second priority becomes first priority. So what we did is, in the priority field, we changed the priority accordingly. then indetailed scheduling planing board, we ran schedule sequence heuristic with earliest date selected order priority in schedule sequence tab withis the heuristic. immedietly the planned order start dates will change. this is ok. But the planned order pegged for the header planned order down the line does not change accordingly, which does not make any sense. actually we have aroung 8 levels of bom wich 4-5 in house products in each level. We cannot go to the product view of each level and each product and change the priority. if the header planned order priority is changed then all the planned orders pegged to it should change. Pls let us know if there is any solution for this.
Thanks
VinayVinay,
If all you want to do is change the priorities of the subordinate orders to match your new priorities at the higher level, then run the Order Priority heuristic (standard is SAP_PP_012). Also, you could use the top-down scheduling heuristic. Standard is SAP_PP_010. These are PP heuristics, so if you are also doing capacity planning, you should review your cap plan to be sure it is still realistic.
More info at http://help.sap.com/saphelp_scm50/helpdata/en/2e/c0703713bf277ee10000009b38f8cf/frameset.htm
Also, look at the blue 'I" next to the algorithm in /SAPAPO/CDPSC11.
Rgds,
DB49 -
I'm wondering how people are migrating their embedded devices that are using the FBWF. I've done some googling and it seems like most people are just re-imaging the devices and after migrating a single device i see why. Its not a pretty process. This will
be a long description but ultimately my question stems more from trying to find a better way to execute the device migration from 2007 to 2012.
Some back ground on my situation might be in order here. I'm in the process of wrapping up our 2007 to 2012 migration. We have a 2007 infrastructure that was a central server with 2 primaries and 286 secondary site servers. I've consolidated that to a single
2012 primary site server that hosts all the main roles. There are 2 more servers in the data centers both operating solely as push distribution points I'll refer to them as 2012 01 02 and 03. I'm over half way through the migration and so far haven't needed
to offload any site roles. There are almost 10,000 clients now reporting to the 2012 site server and almost a 100 field servers pulling content from 2012 02 as their source dp as pull dp is the only way forward for this many devices. I've read the horror stories
of trying spin up 200 plus push dps. We are running PKI. I'm at the point now where i need to start migrating the Windows Embedded Seven Standard clients that have the 2007 sccm client on them with WEDM for write filter handling.
What i'm wondering is if anyone has any pointers for me regarding migrating the WES 7 devices. My plan that i've come up with is to somehow script the process using a 2007 WEDM Task Sequence to try and migrate them over to 2012. Things are complicated as
I need to somehow script the install, the policy checkin, hardware inventory, software inventory, and validate the SCEP client installs before I reboot the device one last time to enable the FBWF. How I handled the SCCM 2007 client install on these devices
when they were provisioned was to just create a batch file that would sleep for ten minutes then check to see if the inventoryagent.log file had been created yet. I realize now that is inefficient as i can kick off the inventory using a WMI method once the
client has installed. Also I need to make sure the machine gets its first policy as that is how it creates the communication using PKI through that first policy transfer and that also finalizes the client install. The biggest piece i'm uncertain about in this
regard is the SCEP client.
I had to change the SCEP client install from yes to no in the default client settings as we have some Mcaffee servers that can't have the SCEP client on them. I have incremental updates enabled on the collection that has the policy that installs the SCEP
client but this will take an unknown amount of time unless i force the environment to update as the device starts in 2012 install, or if I could kick off the SCEP isntall... IDK. I'm also wondering if i should keep the device in the migration process until
i validate it has its proper scep policy applied which I believe can be validated by a registry key somewhere.
Once the 2012 client gets installed will that cause it to lose its place within the 2007 Task Sequence? Considering its going to take a minimum of 2 reboots I'd normally use the task sequence to handle its progression through the process.
I'm also considering trying to use an Orchestrator runbook, as that would be a good way to keep track of the migration process as each device migrates. Especially since this might take several seperate scripts.
I'm going to take a stab at scripting the migration process, but if anyone has any pointers that might make this a less complicated I'd really appreciate it as I've got about 3000 of these devices that need to be migrated over. The other things i've learned
the hard way is any time you have something this complicated over the course of 3000 devices you will run into unknowns and the failure rate increases. I'm in the precarious position of having to not only build this process out but in some situations have
it complete in the shortest amount of time possible as we have sites running 24x7. I know the end users behavior all to well and they will just keep hitting the power button sometimes even though their not supposed to so they can get their device functional
again. In those situations i'd end up, if i'm lucky with a device that no longer has a healthy SCCM client in either environment and the write filter disabled.
So like i said any pointers anyone could throw my way i'd really appreciate. I manually went through the migration process on a single device for proof of concept and ended up with almost 2 pages of pseudo code for my migration script/scripts.
Thanks,
-K.R.Hi,
In R2 there are some new variables you can use to solve this,
http://ccmexec.com/2014/12/smstsmplistrequesttimeout-value-in-milliseconds/
In Sp1 though adding a step to sleep for 2-5 minuter after reboot and before the application install step is a common workaround.. a powershell command with "Start-Sleep
-s 120" should do it.
/Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Mac mini
Processor 2.5 GHz Intel Core i5
Memory 8 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 768 MB
Software OS X 10.8.5 (12F45)
When exporting a group photos with their individual titles, iPhoto changes the manual sequence that I have given and imposes its own sequence (which seems to be alphabetical). The export dialogue box allows me to use my titles or to impose a numerical sequence.
How can I keep my titles and the sequencing that I had carefully worked out?What you are missing is that files have no order - you view them using a program and that program creates the order
When viewing in an iPhoto album you can sort manually and iPhoto will display the photos as you sorted them - but when you move to a different program (the finder for example) you have a totally different set of sorts available - for example in the finder the same set of files can be viewed in alpha order, in size order, in date modified order, etc - none of those are inherent in the file but are sorts set under the view menu
So to meet your requirements you must export with file attributes that allow the finder view options to present your desired view - which is what volunteers here have tried to help with - even though it really does not involve IPhoto in any way
LN -
Using the Matrix Sequencer from Reason Rewire with Audition
Hello. I've been trying to copy the pattern I've made from the matrix sequencer into audition using rewire. Everything's all hooked up. I've tried exporting one of the patterned tracks as a midi file from the matrix and gotten so far as importing and seeing that the new midi track in Audition sees the note pattern as well as the Malstrom synthesizer. I just can't seem to get the track to be copied into Audition. Any suggestions?
Thanks!
-Christina.There's no way to *directly* copy a Matrix pattern into Audition (or any other Rewire host). The only way to do it is to use the "Copy Pattern to Track" function. The process is fully documented in the Reason 4 Operation Manual (PDF) installed with Reason - see page 302. In short, this function copies a Matrix pattern to the Reason sequencer track for the Matrix.
The reason your export to MIDI file didn't work is that Reason only exports notes recorded in its sequencer. Matrix patterns don't get exported. -
Variable with range- only 1st value used in manual planning ?
Hi,
We're trying to define a column in a manual planning layout that will represent a YTD total. We have defined a variable for 0fiscper that contains the range of periods we require in the YTD total. When we execute that manual planning area with this variable used as a restriction on the data column we want, the key figure values displayed only represent those for the 1st period in the range - not all periods in the range !
I'm hoping someone can tell me if manual planning layouts can use variables in this manner. If not, how can this best be done ?
Many thanks,
BlairHi Blair,
Create a total column using the dynamic column, as a result you would have the individual period columns and the total column in the layout. Now make the individual period columns hidden using any of the options below.
You could achieve the same, by making the column hidden in the transaction UPX_MNTN
> Enhance Planning Layout
> Select the relevant layout
> Select the enhanced button for the key figure
column
> Mark the hidden check box there.
Alternatively if you are using Excel GUI, you could set the column width of the columns preceeding the total column as 0 (in the third screen of the layout) to make them hidden.
Hope it helps -
Use DB Sequence/Trigger with Java types
The documentation(Fusion Dev Guide 4.10.10) covers using triggers to assign DB primary keys. This does not seem to apply when using java types.
I have a create button on a master level page which should take the user to a detail level page to fill in the item properties.
How can I use the DBSequence type with java typed variables?This chapter tess you that you can use the trigger assigned PK only for the db sequence type.
Still you can use a db sequence to get a unique number and assign it (after converting it to the right type) to a java type. This you have to do yourself.
this is the javadoc for the class [http://download.oracle.com/docs/cd/E15051_01/apirefs.1111/e10653/oracle/jbo/client/remote/SequenceImpl.html|http://download.oracle.com/docs/cd/E15051_01/apirefs.1111/e10653/oracle/jbo/client/remote/SequenceImpl.html]
Timo -
Can I re-use a parameterized manual test case with different set of parameters in a different test plan without impacting the parameters in the first test plan?
Hi ssteele_1,
Thank you for posting in MSDN forum.
Generally, I know that if you want to re-use a parameterized manual test case and without impacting the parameters in the first test plan.
I suggest you could try to right click this parameterized manual test case ->Select the Create copy and add to suite option like the following screen shot.
Then the parameterized manual test case can be re-used as a new test case in this MTM and it will did not impact the original parameterized manual test case.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have model series KX TG7641 /w 5 phones....
My questions:
1. Can the directory of phone numbers with in my iPhone be transferred to the Panasonic and retain the individual number designations; i.e., "home-moblie-work-etc"?
2. Can I use the manual select on the Panasonic to selectively transfer numbers from my iPhone?Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
FYI, there are no viruses that affect iOS unless the device has been hacked or jailbroken, in which case they cannot be discussed here. -
OSD Task Sequence fails with "There are no task sequences available for this computer"
Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell. -
Use of db sequence in a materialized view
Hi,
Will it be possible to use a database sequence in a materialized view?
The materialized view is to return the result set of query that joins multiple tables. One of the columns in the result set - the to-be-created materialized view - is null and requires a sequence.
Will it be possible to include a db sequence in the query?
Example:
create materialized view example_mview
as
select example_sequence.nextval, table1.'*', table2.'*'
from example_table1 table1, example_table2 table2
where table1.id=table2.idWhat is the purpose of such numbering? To number each row?
If so - then use ROWNUM as 1st column.
SQL>with ddd
as
(select 333 COL from dual union all select 5444 COL from dual)
select rownum,COL from ddd;ROWNUM COL
1 333
2 5444 -
Problem using secondary database, sequence (and custom tuple binding)
I get an exception when I try to open a Sequence to a database that has a custom tuple binding and a secondary database. I have a guess what the issue is (below), but it boils down to my custom tuple-binding being invoked when opening the sequence. Here is the exception:
java.lang.IndexOutOfBoundsException
at com.sleepycat.bind.tuple.TupleInput.readUnsignedInt(TupleInput.java:4
14)
at com.sleepycat.bind.tuple.TupleInput.readInt(TupleInput.java:233)
at COM.shopsidekick.db.community.Shop_URLTupleBinding.entryToObject(Shop
_URLTupleBinding.java:72)
at com.sleepycat.bind.tuple.TupleBinding.entryToObject(TupleBinding.java
:73)
at COM.tagster.db.community.SecondaryURLKeyCreator.createSecondaryKey(Se
condaryURLKeyCreator.java:38)
at com.sleepycat.je.SecondaryDatabase.updateSecondary(SecondaryDatabase.
java:546)
at com.sleepycat.je.SecondaryTrigger.databaseUpdated(SecondaryTrigger.ja
va:42)
at com.sleepycat.je.Database.notifyTriggers(Database.java:1343)
at com.sleepycat.je.Cursor.putInternal(Cursor.java:770)
at com.sleepycat.je.Cursor.putNoOverwrite(Cursor.java:352)
at com.sleepycat.je.Sequence.<init>(Sequence.java:139)
at com.sleepycat.je.Database.openSequence(Database.java:332)
Here is my code:
// URL ID DB
DatabaseConfig urlDBConfig = new DatabaseConfig();
urlDBConfig.setAllowCreate(true);
urlDBConfig.setReadOnly(false);
urlDBConfig.setTransactional(true);
urlDBConfig.setSortedDuplicates(false); // No sorted duplicates (can't have them with a secondary DB)
mURLDatabase = mDBEnv.openDatabase(txn, "URLDatabase", urlDBConfig);
// Reverse URL lookup DB table
SecondaryConfig secondaryURLDBConfig = new SecondaryConfig();
secondaryURLDBConfig.setAllowCreate(true);
secondaryURLDBConfig.setReadOnly(false);
secondaryURLDBConfig.setTransactional(true);
TupleBinding urlTupleBinding = DataHelper.instance().createURLTupleBinding();
SecondaryURLKeyCreator secondaryURLKeyCreator = new SecondaryURLKeyCreator(urlTupleBinding);
secondaryURLDBConfig.setKeyCreator(secondaryURLKeyCreator);
mReverseLookpupURLDatabase = mDBEnv.openSecondaryDatabase(txn, "SecondaryURLDatabase", mURLDatabase, secondaryURLDBConfig);
// Open the URL ID sequence
SequenceConfig urlIDSequenceConfig = new SequenceConfig();
urlIDSequenceConfig.setAllowCreate(true);
urlIDSequenceConfig.setInitialValue(1);
mURLSequence = mURLDatabase.openSequence(txn, new DatabaseEntry(URLID_SEQUENCE_NAME.getBytes("UTF-8")), urlIDSequenceConfig);
My secondary key creator class looks like this:
public class SecondaryURLKeyCreator implements SecondaryKeyCreator {
// Member variables
private TupleBinding mTupleBinding; // The tuple binding
* Constructor.
public SecondaryURLKeyCreator(TupleBinding iTupleBinding) {
mTupleBinding = iTupleBinding;
* Create the secondary key.
public boolean createSecondaryKey(SecondaryDatabase iSecDB, DatabaseEntry iKeyEntry, DatabaseEntry iDataEntry, DatabaseEntry oResultEntry) {
try {
URLData urlData = (URLData)mTupleBinding.entryToObject(iDataEntry);
String URL = urlData.getURL();
oResultEntry.setData(URL.getBytes("UTF-8"));
catch (IOException willNeverOccur) {
// Success
return(true);
I think I understand what is going on, and I only noticed it now because I added more fields to my custom data (and tuple binding):
com.sleepycat.je.Sequence.java line 139 (version 3.2.44) does this:
status = cursor.putNoOverwrite(key, makeData());
makeData creates a byte array of size MAX_DATA_SIZE (50 bytes) -- which has nothing to do with my custom data.
The trigger causes an call to SecondaryDatable.updateSecondary(...) to the secondary DB.
updateSecondary calls createSecondaryKey in my SecondaryKeyCreator, which calls entityToObject() in my tuple-binding, which calls TupleInput.readString(), etc to match my custom data. Since what is being read goes for more than the byte array of size 50, I get the exception.
I didn't notice before because my custom tuple binding used to read fewer that 50 bytes.
I think the problem is that my tuple binding is being invoked at all at this point -- opening a sequence -- since there is no data on which it can act.Hi,
It looks like you're making a common mistake with sequences which is to store the sequence itself in a database that is also used for application data. The sequence should normally be stored in separate database to prevent configuration conflicts and actual data conflicts between the sequence record and the application records.
I suggest that you create another database whose only purpose is to hold the sequence record. This database will contain only a single record -- the sequence. If you have more than one sequence, storing all sequences in the same database makes sense and is safe.
The database used for storing sequences should not normally have any associated secondary databases and should not be configured for duplicates.
--mark -
Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work. -
I have a new ipod and added all my apps to it. When I sign in to Words with Friends it says that "user name is already in use" because it is linked to my old ipod. How can I use the same user name with my new ipod?
Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method -
How do you manually manage podcasts with the new iTunes?
Like the subject line says: How do you manually manage podcasts with the new iTunes?
With the previous version of iTunes, when I plugged in my iPod, I could select the iPod, select podcasts, and manually delete episodes. With the new iTunes, I can't select individual episodes when looking at my iPod through iTunes. Is my only option to Sync? If so, why is that my only option?
This question probably has a simple answer, and I'm just not seeing it.Rock,
I think I figured out a way to do what you want to do - which is the same way that I use Itunes with my Ipod. (My Itunes libary was destroyed last year so I can no longer auto synch my Ipod as I would lose thousands of songs).
Funnily enough, I discovered this new way of manually moving podcasts while trying to figure out what cpragman was trying to say (I never could - he must be smarter than me, as I couldn't get his method to work).
1. Open up your Itunes in your regular Library view. Choose Pocasts from the left hand side (either in the sidebar if you have that enabled, or from the little "radio" icon if you don't.)
2. Mouse to the podcast you want to place on your Ipod.
3. Right-click it. A long menu will pop up.
4. Move to the "Add to Playlist" option. As you hover, all your playlists will be visible. But at the very top will be the name of your Ipod itself (whatever you named it originally). Choose THAT name, and voila! That podcast will now copy to your Ipod and be easily available when you disconnect.
A nice feature of this method is that you can shift-click several podcasts at once and do the same thing, and all your selected podcasts will copy over (if you're like me and update your Ipod only every few weeks).
Hope this helps - let me know if it works for you!
Maybe you are looking for
-
Can't call or execute of different class files in a main program
Hi, I got a main program which can call 3 different classes. The main program have an implicit-choice List as a starting menu. If one of the file is selected, the files will call out and display it. However, i managed to call the 1st 2 files, and the
-
VLD-6328 error : Use a flat file as Source in a mapping in OWB 10.2
Dear all, I have created a simple mapping using a flat file in a remote server as a source and a simple table as a target. When I try to validate the mapping I get the following warning: "VLD-2398: No data file specified. Generated code will use the
-
Battery not working for 7 hours
battery not working for 7 hours.. it working only for 3 hours or 4 hours
-
Files, PDF-docs, attached to my email, Macbook Pro, are missing
The files, PDF-docs, that I attach to my mail, Macbook Pro OS 10.7.5., are missing when the receiver opens the mail. In this case the receiver is a MS Windows/Office user. Weird problem! Any idea for how to solv this? BR Lacose
-
Regarding installation and configuring sun cluster 3.2
Can any provide me the correct hardware and software configurations required for two node cluster for acheiving failover. We have A1000 hardware configured with Raid 5. Does this suit our requirement. I want some clarifications on 1) Configuring the