Use proxy that requires authentication

In the Portal Global Settings page, it is not possible to specify authentication options for the proxy server.
How can a proxy that requires authentication be used? Will this be implemented in a future version?

The proxy uses IWA authenticationThis is the problem I think. As far as I know, to use IWA authentication, you have to configure Identity Management. Please raise a case with Oracle Support and they should guide you correctly to the root cause and possible solutions.
Regards,
Anuj

Similar Messages

How do I scrape external content using a URLScraper channel through a proxy that requires authentication?

I need to scrape external content but my Portal Server lies in my Intranet. The company has a Proxy server that needs authentication in order to browse the Internet.
In the gateway settings, I have made the entries:
iplanet.com|
* Proxyip:proxyport|
This works in the sense that the gateway contacts the proxy for the content, but I get the Proxy Authentication failed page.
Where do I pass my username and password?
Regards,
Vibha

At the present time, you cannot use URLScraper with proxies that require authentication. You can either reconfigure the proxy to not require authentication when accessed by the portal, or create your own custom provider to pass proxy authentication information in the HTTP header.
Stephen

I'm trying to log into my site that requires authentication but I get a popup that says it doesn't require authentication and then I get a 403

I have a site that requires authentication. In the past i have logged in using firefox with the following format
http://username:password@sitename:siteport/specificsiteurlinfo
and gotten in just fine. I just set up a new computer with a new instance of firefox and try the same thing but I now get the following popup-
"You are about to log in to the site "sitename" with the username "username", but the website does not require authentication. This may be an attempt to trick you.
Is "sitename" the site you want to visit?"
When I click "yes" Firefox appears to try to go to the site without any authentication and I of course get a 403 Forbidden error.
I have tried reverting back to old versions of Firefox with no luck.
Any advice would be greatly appreciated.
Thank you.

The purpose of that warning is to alert you to the possibility of being fooled by a link with login credentials at the beginning. On your old computer you might have tweaked this setting to limit when the warning appears:
http://kb.mozillazine.org/Network.http.phishy-userpass-length
This article discusses the steps to adjust that setting to fit your needs: [http://fix.lazyjeff.com/2011/04/disable-firefox-login-prompt.html].

I can't send mail to the site that required Authenticator

How can I send mail to the smtp site that required Authenticator,If th smtp site doesn't require Authenticator ,I can send mail.
My program:
Properties props=new Properties();
props.put("smtp","smtp.163.com");
props.put("auth","true");
MailUser mu=new MailUser("username","password");
javax.mail.Session session=javax.mail.Session.getDefaultInstance(props,mu);
public class MailUser extends Authenticator
String username;
String password;
public MailUser(String us,String ps)
this.username=us;
this.password=ps;
}

Properties props = System.getProperties();
props.put("mail.smtp.host", "hiart.co.kr");
props.put("mail.smtp.auth","true");//auth module....
session = Session.getDefaultInstance(props,null);
Date date = new Date();
msg = new MimeMessage(session);
System.out.println(from);
msg.setFrom(new InternetAddress(from+"@hiart.co.kr"));

When I try to use games that require thne internet is says no internet access and when I try to google it It says can't reach google at this time

when I try to use games that require the internet it says no internet access and I can't download messages and Can't ask questions of Google it can't reach Google at this time. How can I get this remedied ?

Wifi is on and connection is properly established with correct log in information? Mobile data is set to ON? No restrictions on background data enabled? Strong wifi or mobile data signal?

The Scout CC installer stalls. I am behind a proxy that needs authentication. What can I do?

The Scout CC installer stalls at the beginning of the process (trying to connect to the server).
I am behind a proxy that needs authentication.
How can I install Scout CC?
Thanks

Hi cadrian,
Are you on a managed network. If yes then kindly make sure that the following host/port combinations may need to be white-listed when logging in with an Adobe ID to download, install, and activate licensing for applications via a Creative Cloud membership.
    ccmdls.adobe.com:443
    ims-na1.adobelogin.com:443
    ims-prod06.adobelogin.com:443
    na1r.services.adobe.com:443
    prod-rel-ffc-ccm.oobesaas.adobe.com:443
    lm.licenses.adobe.com:443
    ccmdl.adobe.com:80
    swupmf.adobe.com:80
    swupdl.adobe.com:80
Regards,
Rave

My ipod 4rth generation wont connect to my hom wifi but will connect to others . like when i try to use apps that require wifi it says i dont have wifi . HELP !

my ipod 4rth generation wont connect to my hom wifi but will connect to others . like when i try to use apps that require wifi it says i dont have wifi . HELP !

Since you have already isolated it down to your home network, if following Steve's instructions do not fix your issue, contact your Internet Service Provider or Router Manufacturer and make sure your network is set up according to this information: iOS and OS X: Recommended settings for Wi-Fi routers and access points

TS4207 Unable to use websites that require cookies while on cellular data

I cannot use my iphone4 while on cellular data when trying to use websites that require cookies. Keep getting enable cookies messages even thou they are enabled. Once I am on wifi this issue completely disappears.

Just another great apple mystery gone unsolved. Thanks apple you're swell.

NI Installers & downloaders do not support proxy servers requiring authentication

Hello, I'm posting this on the LabVIEW forum since it applies to the LabVIEW installer and evaluation version downloader, but it also applies to other products that use the NI meta-installer framework and other products that use the NI downloader.
We are behind a corporate firewall which requires the use of a proxy for internet access. In addition, the proxy requires authentication, which I believe is the complicating factor.
When running an NI installer, if we check the box that requests that the installer contact NI for new notifications, this will inevitably fail when trying to connect to the notification server.
Also when trying to use the NI downloader to download drivers or other products, the download always fails.
Most other software (e.g. Browsers, Dropbox, etc.) are able to use the proxy and allow entry of the username and password (either through a pop-up username/password dialog or configuration page).
This has generally not been a showstopper problem, but since it affects the NI installer framework it impacts many products and thus they would all benefit from a single bug fix.
Thanks,
Joe

Hi GeekySeb,
Are you using the most current versions of the NI Downloader and NI Update Service? The problems with proxy servers have been repaired in both of them.
You can download the current version of the NI Update Service here, either by using the NI Downloader or by downloading the installation file directly. This option should exist for most of our software downloads, so if the NI Downloader does not appear to be working for you then there is an alternate download option.
http://www.ni.com/download/ni-update-service-14.0/2617/en/
If none of these options work for you, I would recommend contacting your company's support group for help in configuring your firewall to be able to download NI's software.
Regards,
Kelly B.
Applications Engineering
National Instruments

Accessing a WMS created with Geoserver that requires authentication

Can I create a WMS theme in Map Viewer that is served from Geoserver? This Geoserver WMS requires authentication. I can access it in ArcGIS but I don't know how to access it in Map Viewer.

Where is the Authentication? The following operates are done in 11.1.1.7.1. Is there any problem? Please talk more detail!
1.Create a WMS theme by Using the Map Builder tool. It's name is wms_theme130wps. The result is the following:
Record contents to be stored into USER_SDO_THEMES
NAME: wms_theme130wps
DESCRIPTON:
BASE_TABLE: WMS
GEOMETRY_COLUMN: WMS
STYLING_RULES:
<?xml version="1.0" standalone="yes"?>
<styling_rules theme_type="wms">
<service_url> http://localhost:8080/mapviewer/wms? </service_url>
<user> wms </user>
<password> +wE1RbfVl94yXdaLJKtG09v64OPJtG40 </password>
<layers> COUNTIES_TERR </layers>
<version> 1.3.0 </version>
<srs> EPSG:4326 </srs>
<format> image/png </format>
<bgcolor> 0xA6CAF0 </bgcolor>
<transparent> true </transparent>
<exceptions> xml </exceptions>
<capabilities_url> http://localhost:8080/mapviewer/wms? </capabilities_url>
</styling_rules>
2. Request with the URL, http://localhost:8080/mapviewer/wms?REQUEST=GetMap&VERSION=1.3.0&LAYERS=wms_theme130wps&WIDTH=1500&HEIGHT=560&CRS=SDO:8307&BBOX=-180,-90,180,90&FORMAT=image/png.
This request is without any Authentication message!
3.Request returns a PNG Image.

Problems invoking external web page that requires authentication

We have a web service deployed to OAS 10. This web service needs to be able to open a URL and read the results. This URL requires authentication.
We have a subclass of Authenticator that provides the user name and password.
When we run this web service using the debugger from JDeveloper, it works just fine. However, when deployed to the app server, it fails.
java.io.IOException: Server returned HTTP response code: 401 for URL: http://... at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1149)
I've stripped out the URL details, but it's invoking a report using Microsoft's SQL Reporting Services.
If I read the error stream, it indicates that request couldn't be authenticated.
So, I'm hoping some people here can point me at what's different between the debugger environment and the application server environment. We suspect that it may be related to permissions in a java policy file, or perhaps some other file from which the application server derives its permissions. But our fiddling with these hasn't helped so far.
So, any ideas as to what went wrong? Ideas on how to open things up so this works?
Thanks in advance for any help provided.
BTW, if there's a better forum into which this should be posted, please let me know.

Greetings,
401 indicates authentication failure, as you have stated. Once deployed, have you attempted to access the report URL using the uname\pword combination with the strings which are hard-coded in your subclass? You can turn up logging to FINEST and customize what logging on the server returns. Login to your OAS administration portal and review the logging options there. If you start the server from the command line, you can view the output there real-time.
-Michael

I am trying to us a form on a site that requires authentication and it won't work with Muse

I called the provider and they sent me a bunch of code to insert in order to make the form work but is there anyway I can make it work from within Muse? https://solutions.hostmysite.com/index.php?/Knowledgebase/Article/View/8460/0/using-pear-m ail-to-create-a-php-mail-form-that-uses-authenticationauthentication-is-required-by-hostmy site
I have no idea how to deploy any of that stuff or how to do a captcha without using Muse.
The website is question is http://www.kiddintl.com/work-with-us.html
Should I have the domain point to an adobe business catalyst site in order to make everything in Muse work correctly?
[email protected]

Hi Peter,
In the latest release of Muse the option of recaptcha was added to both Bc and non Bc hosted site. Please check the link below to know more on this.
http://helpx.adobe.com/muse/using/form-widgets.html#Preventing spam using Google reCAPTCHA
I am afraid that this is not possible in Muse, to generate captcha for a site that is not hosted via Bc, at this stage, I will recommend that you post this on our ideas section over here, https://forums.adobe.com/community/muse/ideas, and let our devs team know of this requirement.
In the meantime, you will need to insert the captcha code manually on the Muse form once after you have exported the html of the site and this is something that you will need to every time the code is generated because Muse will overwrite the changes that you have made.
- Abhishek Maurya

Parsing Content From A Site That Requires Authentication

Ive been scanning websites using the Java HTML parser from htmlparser.sourceforge.net to gather useful data into a more easily used format, in this case it is stored in a mySQL database.
The problem that has stumped me for the past few days is how to get around the login authenication page required to access content from the website www.racingpost.com . I am a registered user but am having difficulty logging in via Java and managing the cookies to bypass the login page HTML I keep getting instead of the race data.
I am unsure when and where I should be passing cookies around. Also logging in using POST is confusing me.
Thanks for any help you can offer.

this should help you out with posting to a URL. It is taken from:
http://javaalmanac.com/egs/java.net/Post.html
// e135. Sending a POST Request Using a URL
    try {
        // Construct data
        String data = URLEncoder.encode("key1", "UTF-8") + "=" + URLEncoder.encode("value1", "UTF-8");
        data += "&" + URLEncoder.encode("key2", "UTF-8") + "=" + URLEncoder.encode("value2", "UTF-8");
        // Send data
        URL url = new URL("http://hostname:80/cgi");
        URLConnection conn = url.openConnection();
        conn.setDoOutput(true);
        OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream());
        wr.write(data);
        wr.flush();
        // Get the response
        BufferedReader rd = new BufferedReader(new InputStreamReader(conn.getInputStream()));
        String line;
        while ((line = rd.readLine()) != null) {
            // Process line...
        wr.close();
        rd.close();
    } catch (Exception e) {
    }

Any possible workaround to use annotations that require an enum constant...

I am doing code generation and following the generation gap pattern (http://www.research.ibm.com/designpatterns/pubs/gg.html). For JPA i add a few annotation like @Table or @Inheritance to the generated-once client class and not the always-generated base class. However the problem is that if the values of those annotations change, it doesnt get reflected in the generated-once code, since its only generated once - the 1st time and never touched again.
So was trying in some way to get the annotations be on the base class thats always generated and did whats mentioned in this newsgroup post http://www.eclipse.org/newsportal/article.php?id=79805&group=eclipse.platform#79805
However it doesnt work since java doesnt like non enum constants in the annotation.
I wonder if there is some approach people have come across to address this kind of problem? (apart from say generating an orm.xml always to put annotations in there)

Priyajeet wrote:
Thats what I am generating. One class is getting split into two. One always generated, while the other generated once.
You are still missing the point of the pattern.
The pattern is
<Class that is NOT generated> becomes <generated class> <manual class>
And as I already said the fact that you have another generated class doesn't mean that you can't apply the pattern to second class.
Consider this UML diagram where A --> B means A extends B
4 Files get generated
1] ABase extends B (always generated)
2] A extends ABase (generated-once)
3] BBase (always generated)
4] B extends BBase (generated once)
It is 2 and 4 that will get the annotations for JPA - @Entity, @Table and @Inheritance.
1 and 3 will get @MappedSuperclass.
So my problem above that I mention applies to the Child (A or B) and not Parent (ABase or BBase)
The seperation into functional units are joined by inheritance.
Java doesnt have partial class methodology.
So inheritance joins the 2 functional units.That entire explanation doesn't matter. Actually the pattern doesn't matter either.
Code generation, all code generation is simple.
You take 'source', run it through a 'tool' and the output is 'code'.
For that to work you MUST have 'source' and a 'tool' that produces the 'code' that you want. If one of those pieces is missing you can't use code generation.
The variations on that are infinite. The only limitation is complexity and that at some point you reach a point of diminishing returns where it costs more to do the code generation (including maintainance) than it does to do it manually.
So your options are
1. Find some way to generate it all.
2. Find some way to seperate some of the code out so some can be generated and the other is manual (and this is sort of the point of the pattern.)
3. Do it manually.
There is no magic. I would also like to suggest that you forget about the pattern entirely. It is clever but it is more of a intro to code generation and you appear to be limiting the possibilities by that pattern and you do not need to do that.

Outgoing mail to SMTP server on Port 25 that requires authentication.

I am not able to send email from my Droid X to company email smtp server. Anyone have any ideas. It is desirable to send email to clients from my company server.

Do you have the $29.99 unlimited e-mail/ data plan? The Corporate E-mail Feature is $44.99 monthly access and includes unlimited data transport for e-mail, web browsing and app usage. This service is designed for those who need access to their corporate e-mail and intranet, which seems to be what you need if you need to use your company server. This feature can be changed via My Verizon or by calling Customer Service at 800-922-0204.
Thank you,
VanessaC_vzwsupport
Follow us on Twitter www.twitter.com/vzwsupport

Use proxy that requires authentication

Similar Messages

Maybe you are looking for