User changes from Agent to Supervisor frequently

Hi All,
I have a customer asking me to implement the below:
users should be able to change their role from Supervisor to agent and vice versa eveyday, if they are supervisor they go to different queues and get the call with delay.
So, what is the best way to impleemnt it in UCCX 9.0 ?
The part that I do not know is how user should be able to change his role without having access to administration page?
Thanks,
HA

The part that I do not know is how user should be bale to change his role without having access to administration page?
You can't, at least not without the HTTP REST Configuration API. Also, I suspect this is the wrong question to ask in your case. Based on your description, it appears you don't actually need to remove their supervisor rights (i.e. access to CSD), you only need to change their CSQ membership. That is supported through the Supervisor Access to Teams setting in /appadmin or the Mobile Skill Manager.
if they are supervisor they go to different queues and get the call with delay.
The "with delay" part is not going to be configurable at the user-level. A skill competency rating can make an agent least preferred but it will still be an instant decision by the RmCm subsystem. If you want the call to not be offered to the supervisor(s) until a certain time threshold you will need to have an extra CSQ and configure this logic in the AEF script, typically through simultaneous queuing.
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

Background user Changed to BIA-User from BWALEREMOTE

Hi Experts,
I am facing a issus with User. Process chains are triggred through ControlM, and all infopackages in PCs triggred with CONTROLM user and background user is BWALEREMOTE.
Recently some processchains failed because of BIA-USER not having authorization to trigger the Infopakage. For those PCs only the background user changed from BWALEREMOTE to BIA-USER.
Basis people using BIA-USER for other perpuse.
Please let me know how to correct the issue.(background user back to BWALEREMOTE for those infopackages)
Being a critical issue.Please reply me asap.
Thanks in Advance,
Chandra

Hi,
I think we have an option of changing the execution user of the process chain by which this can be prevented
just give it a try it may help you
for the process chain
go to change mode
in the menu bar->Process chain->Attributes->execution user
Select Special user give aleremote there and active the process chain
and try with basis id executing it through se37
i am not sure its going to help but give it a try
Regards,
MADhu

We have an itunes account on our desktop and my kids have it on their ipod and iphone. I went in and changed our user name from my old e-mail address which is no longer accessible to my new one and now either of my kids can access the itunes store..

We have an itunes account on our desktop and both my kids have it on iphone and ipod. I went in and changed out user name from an old e-mail address which is no longer accessible to my one I use now... When the kids try to sign onto the itunes store it tells them they have the wrong user name..
Can this be fixed??

Did you change the email address or create a new Apple ID?
If the email address associated with the account was merely changed, sign out of the Apple ID on the devices and sign in using the new credentials.

How to change user password from default realm programaticaly

Hello,
I would like to know if there are any ways to change a users password from a file
realm through java classes ie . programaticaly.

Thank you for the support.
After looking at the code, I noticed RealmManager is not documented in the BEA
Javadocs. Am I missing something or is it not documented. Lot of other methods
also not documented. Do you have the latest Javadocs?
Thanks
John
"Tom Moreau" <[email protected]> wrote:
>
See message #4589 - it posts the code magic needed
to change the password. The caller doesn't have to
be aware of which realm is being used - that's taken
care of for you.
-Tom
"John M" <[email protected]> wrote:
Hello,
I would like to know if there are any ways to change a users passwordfrom
a file
realm through java classes ie . programaticaly.

How do I change my user id from dsgence to dsgrence? Under the menu / title I keep getting where you would see a pop-up message title "know your rights" how do I get rid of that also?

How do I change my user name from dsgence to dsgrence? Under the title bar where you would see pop-ups a message "know your right" keeps coming up every time I reboot?

You can post a request in the contributors forum if you want to change the user name.
*https://support.mozilla.org/en-US/forums/contributors
Add [ATTN ADMIN] in front of the subject title to get the attention of a forum Administrator.
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved

How can I change LDAT user attbibutes from my application ???

how can I change user attbibutes from my application!!!!
It always tries to create a new user but I need to change only values (like tel number!!!) of EXSISTING user!!!
I can not find any class/method to change the value of existing User attribute !!!
I am totally pissed off, please help!!!
I tried this :
AMUser user = amsc.getUser(userDN);
user.setStringAttribute("givenname", "test");

chek this out----
String lastName = req.getParameter("lastname");
storeUserAttributes("sn", lastName, userAttributeMap);
private void storeUserAttributes(String attribute, String value, Map userMap)
Set userSet = new HashSet();
userSet.add(value);
userMap.put(attribute, userSet);
AMPeopleContainer ampc = conn.getPeopleContainer(ouDN);
AMPeopleContainer ampc = conn.getPeopleContainer(ouDN);
if(ampc !=null)
/*My code for create users with Sun Portal Desktop service*/
Set serviceNamesSet = new HashSet();
Set userSet = new HashSet();
serviceNamesSet.add("SunPortalDesktopService");
userSet = ampc.createUsers(userMap1, serviceNamesSet);
this will help u
http://lokeshpant.blogspot.com

Capturing the User Id from the Password change screen after Login

Hi,
I need to capture the User Id from the Password Change screen and Pass it to the Custom Portal application that is triggered on the change password screen.That User Id will be passed on to the Portal application to retrieve the details of the User.
I have triggered the Custom Portal application from the OnClick of CHANGE button.
It can be probably done by appending the User Id captured from the Change Password screen to the Url of the Portal application.
But am not clear how to capture the User ID.
Pls help!!
Thanks & Regards,
Amarys.

Hello
Why do you want to capture user id? You can access it from portal application.

I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Can I resolve this?

I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Any ideas how I can get access to these now?

Hi Blotontheland,
Thanks for the prompt reply. The interesting thing is that my Macbook Pro was upgraded today to Yosemite and I still have the spinning wheel on the start up screen before the login page comes up.

Any user complaints re: OS X Mavericks. Why change from OS X 10.8.5?

See many user complaints re: OS X Mavericks. Why change from OS X 10.8.5?

Reasons to upgrade:
Mavericks is flawless on my mac.
Mavericks seems faster than 10.8.
iBooks
iCloud keychain (big plus: my passwords now sync between OSX and iOS).
There are a few things to be aware of before you install it, though:
Any new OS has some bugs and incompatibilities with old software and hardware. If you are uncomfortable with basic Mac troubleshooting, then perhaps waiting would be a better strategy. However, I didn't have any software issues with installation or after.
If you have any mission-critical software or peripherals, make sure they are compatible first.
Mavericks does not play well with some old/bad software:
Crapware: anything that purports to "clean", "monitor", "protect", or "accelerate" your mac. Unnecessary on Macs and often harmful. Examples: CleanMyMac and MacKeeper (the King of Crapware).
antivirus software. Of dubious benefit on Macs.
"haxies": apps that change the appearance of the GUI.
The vast majority of disgruntled Mavericks-haters that post on this forum have crapware and antivirus software and other dreck on their macs that they are very reluctant to part with.
Mavericks does not play well with WD hard drives: this is because the software that comes on the drives, and the software that comes with the drives that WD wants you to install on your mac, and in some cases the firmware that is built into the enclosure of the external drive, are all incompatible with Mavericks. None of the software is necessary. If you have a WD drive, you should:
reformat (erase) it before you use it with a Mac
if you have installed WD software on your Mac, uninstall it. It's unnecessary anyway.
research it on line to see if it has the incompatible firmware on it. If it does, and you just bought it, I'd return it.
Before you install Mavericks, it's a good idea to:
have a good backup, like with Time Machine
make sure you have enough RAM. The specs say 2GB, but 4 is probably a more realistic minimum. If you do memory intensive work, you'll want more.
uninstall Crapware. This can be a problem because one of the hallmarks of crapware is that there is usually no uninstaller. It can also damage your OS and be difficult to uninstall completely. You may have to reformat (erase) your HD and do a clean install to completely get rid of it.
uninstall antivirus software and haxies.
repair your hard drive and permissions with Disk Utility
boot into safe mode, and then run the installer Mac OS X: What is Safe Boot, Safe Mode?

Security Agent: Could not get the user record from OpenDirectory

Hi,
Two months ago I had to change my SSD due to a damage at the old one. In the Apple shop they installed OS X Lion with a image from their image-server.
After that the Mac was quite slow in booting. With the old SSD (128 GB) booting takes 25 sec now it takes 75 sec.
I tried different things to solve the problem without result. First I asked in the shop, then I googled the problem all with no real solution.
Today now I searched in the log files. I found the following:
09.02.12 11:03:07.861 SecurityAgent: Could not get the user record from OpenDirectory.
09.02.12 11:03:07.861 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
09.02.12 11:03:34.907 SecurityAgent: Could not get the user record from OpenDirectory.
09.02.12 11:03:34.907 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
09.02.12 11:03:34.907 SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
09.02.12 11:03:38.653 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
09.02.12 11:03:58.245 SecurityAgent: User info context values set for andi
09.02.12 11:03:58.246 SecurityAgent: User info context values set for andi
09.02.12 11:03:58.356 SecurityAgent: Login Window login proceeding
09.02.12 11:03:58.356 SecurityAgent: Login Window login proceeding
This operation takes 30 secs during the boot process. Can somebody help me, to solve this problem?
Regards
Andreas
MacBook Pro, Mid 2009
2.66 GHz Intel Core 2 Duo
8GB 1067 MHz DDR3
SAMSUNG SSD 830 Series , 256 GB
OS X 10.7.3

cece2bali wrote: "it seems that your mac tries to connect to a server while booting. This action will erase all your network configuration..."
Where can I go to learn more about this 'erasure' of network configuration if the mac tries to connect to a server while booting?
I get the same error message as the OP. My account is an Admin on the machine. It's configured to automatically log in on boot -- except sometimes it fails. It has a login-item which runs a bash script that makes an https request to a nearby machine. Maybe I should make this script sleep a while so the https action happens after the boot sequence is done? (unlike SmashHuevo, my user needs to be an Admin)

Change CCX Agent USER-ID

Good day,
I have a client that has a CCX8.0 with a CUCM
They have 10 agents created and working in the call center.
Recently they area replacing one of those agents.
They cant create another agent/user because they dont have more licenses, but they ask us to change the "user ID" for the actual user.
We have changed the "User ID" under "End User" menu in the CUCM7.
We can see the change reflected in the "RmCm>Resources" menu in the CCX, but the change is NOT reflecting un the "CCX Desktop Administrator".
We have already tried pressing the "Synchronize Directory Services" inside the "CCX Desktop Administrator" with no luck.
Also the user cannot login.
Do i need to make another change??
What im forgeting change the Agente User ID??
Thanks for the help.
Osvaldo

Hello Chris,
Ive tried what you suggested but the problem was the same with the creating of the agent.
I can see the new agent in the "RmCm>Resources" menu, but i cannot see it in the "CCX Desktop Administrator".

HT5361 I am just changing from a PC to a Mac. How do I make a favorites list ( most frequently contacted people) on my MAC in e-mail as I did on the PC?

I am just changing from a PC to a MAC. How do I create a favorites list ( People that I contact frequently) on Mac like I was able to do on a PC?
I want to set up an e-mail list of peoole that I sent messages to frequently.
Thank you

Use Address Book, also called Contacts in later versions of OS X:
http://support.apple.com/kb/ht2486
Mail pulls its email addresses from that application. See also:
http://computers.tutsplus.com/tutorials/contacts-101-a-beginners-guide-to-contac ts-on-os-x--mac-51751
Regards.

Changed from Iphone to Xperia Z1 and cant receive texts from iphone users

i recently changed from Iphone to Z1 but can not receive text messages from a lot of iphone users ( i can from some which i strange). i have turned off the Imessage setting on the old Iphone and let it sit for 30mins for apple servers to identify this. i have also done a software repair via PC Companion but still doesnt work.
any suggestions?

The thing is that your friends still using iPhone must remove you from iMessage. Otherwise you might end up with this problem.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Just today web-sites I frequent like reddit, oregonlive and even FB started taking forever to load. I've made no changes from yesterday and today. Any thoughts?

Question
Just today web-sites I frequent like reddit, oregonlive and even FB started taking forever to load. I've made no changes from yesterday and today. Any thoughts? edit

asdfjava-er wrote:
The book that I'm using said it wasn't necessary for this because it's supposed to just make sure everything is working properly--which it's not.OK, if you want to ignore my advice, so be it, but please don't complain that it is not going to work without even trying it yourself.
asdfjava-er wrote:
Now this is the part I don't get. The book tells me to go to http://localhost:8080/ch1/Serv1 even though there are no files/folders that have the name Serv1.
Do you understand what the <servlet-mapping> declaration in the web.xml means? It is roughly just saying the appserver that it should port all requests on /Serv1 to the mentioned servlet.
a couple others like/ch1/WEB-INF/classes/Ch1Servlet.class and /ch1/WEB-INF/web.xml. The WEB-INF folder is not public accessible, so forget about that part.
"Resource not found" simply means that either the URL is wrong (case counts!) or that the resource is actually not there. I.e. not compiled, not deployed, not loaded, etcetera. Reading the appserver's startup logs might also help.

How to change the user status from CJ01 transaction

Hello All,
I am doing a BDC in CJ01 transaction where there is a field called "User Status" .
This field is not editable. However the requirement is to populate this field with some value based on some other entries.
Is there any Function module / BAPI to update user status from CJ01.
Thanks in advance.
Regards
Indrajit

Hi Anbu
    Thanks for your kindness.
     I had got the proper badi definition ( RECN_CONTRACT ) before. I have try to implement the badi in my implementation YCL_IM_RECN_CONTRACT and below is my example codes. It can update the user status when the SAVE button is pressed. My example codes are below:
METHOD if_ex_recn_contract~check_all.
DATA:
      cl_recn_contract   TYPE REF TO cl_recn_contract.
DATA: r_status_mngr TYPE REF TO if_reca_status_mngr.
DATA: lv_status_profile TYPE j_stsma.
DATA: lt_status TYPE re_t_status,
            ls_status TYPE LINE OF re_t_status.
DATA: r_message TYPE REF TO if_reca_message_list.
cl_recn_contract ?= io_object.
CHECK if_before_store = 'X'.
CALL METHOD cl_recn_contract->if_reca_has_status~mo_status_mngr->get_current_status
    IMPORTING
      ed_status_scheme = lv_status_profile
      et_status        = lt_status.
lv_status_profile = 'ZBCIA01'.
CALL METHOD cl_recn_contract->if_reca_has_status~mo_status_mngr->set_status_profile
    EXPORTING
      id_status_profile = lv_status_profile.
READ TABLE lt_status INTO ls_status INDEX 2.
ls_status-stat = 'E0001'.
ls_status-inact = ''.
MODIFY lt_status FROM ls_status INDEX 2.
   CALL METHOD cf_reca_message_list=>create
     RECEIVING
       ro_instance = r_message.
CALL METHOD cl_recn_contract->if_reca_has_status~mo_status_mngr->set_status
    EXPORTING
      it_status           = lt_status
      if_only_user_status = 'X'
      io_msglist          = r_message.
REFRESH lt_status.
ENDMETHOD.

User changes from Agent to Supervisor frequently

Similar Messages

Maybe you are looking for