User define field in inventory tracking

Hi there,
I found out that there is no UDF allowed in inventory tracking
i need UDF like bin location to indicate each item on different bin code.
Anyone has any solution for this scenario? Thanks

Hello,
you are correct. you can't add UDF in the selection criteria (all selection criteria). It must be done using addon. We have developed addon in the item list selection criteria, the addon is a report adddon means a button that can call crystal report.
So, I am sure you also must do that, but if I see requirement, it means that the selection criteria will filter based on bin code.
Rgds,

Similar Messages

  • Populate User Defined Fields

    Hello everyone,  I have an add on that puts a button on the invoice that when clicked, brings up a screen to fill in some information and submits the information.  The add-on then takes some of that info and populates UDFs on the invoice and submits the invoice.  1.  My first question is, do I have to have the UDF's visible in order to populate them?  I found that I received an error when I tried to set their value when they were not visible, but wasn't sure if there was a way around that.  2.  I am finding that it is difficult to track which UDF form links to the invoice form.  Is there a way to tie back the UDF form (-133) to the invoice (133)?  It is not FormTypeCount, because that goes solely by the order in which the screens were displayed...  Please let me know.  My true goal here is for someone to be able to have multiple invoices up with multiple versions of my add on and when they submit, they all submit the right thing. 
    Your assistance as always is greatly appreciated.  Thank you so much.

    Hi, today I've also looked for a solution to be sure that the UDF-Form (in my case for sales quotation) is always open.
    Now I do it with activating View User Defined Fields:
    SboUI.Menus.Item("6913").Activate()
    when the Form is opened.
    Catching Item-Event et_FORM_LOAD seems to be too early for that.
    Now I'm catching the Menu-Event ('after') for Sales Quotation:
    MenuEvents:
    If pVal.MenuUID = "2049" And Not pVal.BeforeAction Then
       SboUI.Menus.Item("6913").Activate()
    End If
    And preventing the UDF-Form to be closed
    Item Events:
    If pVal.FormTypeEx = "-149" (....) Then
       If pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE And pVal.BeforeAction Then
          BubbleEvent = False
       End If
    endif
    I'm still not sure if this is really a good solution...

  • User-defined field limit

    Hi All,
    Is there a limit on the number of user-defined fields? In SBO 2005 PL03 I cannot create more than 30 UDFs on the BP table. I get the following error: WTR1 Error(1)
    The record limit of 8060 is not close to being reached.
    Thanks in advance,
    Adele

    Adele:
    Im running 2005 PL06, and I created 38 fields to try ypur problem, and I can keep creating fields.
    The strange thing is your error is in the WTR1 table, that is the Inventory transfer rows table.
    may I suggest that you try fewer fields, maybe one, with the total length of your 30 fields?  that way, you'll discard a maximum number of fields issue.
    Harold Gómez

  • User Defined Field that gives the date output of the last price update.

    We would like to create a User Defined Field (UDF) with a Formatted Search (FMS) on the Item Master form that gives the date output of the last price update specifically the wholesale price.
    Last Price Update
    Pricelist 2 = Wholesale
    Is this feasible?
    If it is feasible what is the recommended approach?
    Current working UDF on Item Master.
    /* Date output is based on all the latest updates on the Item Master.*/
    select max(updatedate)
    from aitm
    where itemcode = $[oitm.itemcode]
    Resources that were helpful.
    1.(Note:1165947 - Tracking Item Price Changes.)
    2. Case 4-I6: Query on price updates. Mastering SQL Queries for SAP Business One By: Gordon Du

    Thank you Gordon,
    We are looking for the date output of the 'Last Price Update' based on 'Pricelist 2 = Wholesale' which is the challenge.
    These 2 are the parameters for the date output, I should have mentioned that in my original message.
    Last Price Update
    Pricelist 2 = Wholesale
    Per reading a bunch of other similar Forum Questions it looked like it is might not be possible to do. With there being no date on the AIT1 table and AITM.Updatedate is based on any and all updates not just last 'Last Price Update' and not sure how to use the loginstanc.
    Thanks,
    Vern

  • Escalating user defined field

    Hi,
    iam new to SBO and i need to write add ons in VB.net code. we have a user defined field in purchase order and sales order.
    the reuirement is that a windows servisce program should run at regular intervals and trap the records  using tha user defined field.
    I need to write a stored procedure to capture those data.
    could u please help me ?
    thanks & regards
    --Ravi

    First, does the registry value actually exist on the workstation? At
    HKEY_LOCAL_MACHINE\Software\xxxxx.com\Location
    Second, how is the AutoFill set for that UDF? You'll find that in the Collection Option Set, in the "Collection Editor" tab, and you can edit it if "Run Collection Editor: Always" is turned on in the "General" tab.
    In the Collection Editor tab, find your UDF - Workstation, User, Inventory - and look at the AutoFill column. If it's set to "Always", then it should always populate during a scan. If it's set to "WhenEmpty", it'll only populate if nothing has already populated the field. If it's set to "Never", it'll never populate.
    Third, has an inventory scan run on the workstation in question? Nothing will be populated until a scan has taken place and the resulting WIF has been returned to the Collection Server and successfully loaded. You can force an immediate scan if you need to, but a scan must happen.
    -- Tim --
    Originally Posted by pcwoodring
    I have created a user-defined field called Location. I have set its default value to the following registry key -> %HKEY:HKEY_LOCAL_MACHINE\Software\xxxxx.com\Locati on
    From the Web Asset Management window, it displays it as text, not retreiving the actual registry key
    What am I doing wrong?
    Example:
    Other Information
    Field Value
    Location %HKEY:HKEY_LOCAL_MACHINE\Software\xxxxx.com\Locati on

  • [Ask] User Defined Field

    Guys, I have two questions here...Hope you guys can help me solving the problems...
    1. How to make user defined field that link to user defined table?
    2. Can I make Query with Inventory master data as a base?
    Thx guys...

    Hi Dear,
    You can do this through SDK also as
    1) Create one UDT named OCT_ITEMSUBGRP1 as
    CreateTable("OCT_ITEMSUBGRP1", "Item SubGrroup1", 0)
    Create Table Procedure is
    Private Sub CreateTable(ByVal txttablename As String, ByVal txtTableDescription As String, ByVal txtTabletype As Integer)
            Dim iRet As Double
            Try
                OCT_tables = OCT_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                If OCT_tables.GetByKey(CStr(txttablename)) = False Then
                    OCT_tables.TableName = txttablename
                    OCT_tables.TableDescription = txtTableDescription
                    OCT_tables.TableType = txtTabletype
                    iRet = OCT_tables.Add()
                    OCT_Application.SetStatusBarMessage("The Table " & txttablename & " is Added.", SAPbouiCOM.BoMessageTime.bmt_Short, False)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(OCT_tables)
                Else
                    OCT_tables = Nothing
                End If
                If iRet <> 0 Then
                    OCT_Application.MessageBox(OCT_Company.GetLastErrorDescription)
                End If
                OCT_tables = Nothing
                GC.Collect()
            Catch ex As Exception
                OCT_Application.MessageBox(ex.Message)
            End Try
        End Sub
    Step 2) Creating the Linked Field
    Create_FieldLinked("OITM", "SubGrp1", "Company Classification", 0, 0, 8, "OCT_ITEMSUBGRP1", "")
    Create Linked Table Procedure is
    Private Sub Create_FieldLinked(ByVal txttablename As String, ByVal txtFieldname As String, ByVal txtFieldDescription As String, ByVal type As Integer, ByVal subtype As Integer, ByVal size As Integer, ByVal linktable As String, ByVal ValidField As String)
            'Create Instance of UserTablesMD object 
            OCT_FieldL = OCT_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            Try
                OCT_FieldL.Name = txtFieldname
                OCT_FieldL.Type = type
                OCT_FieldL.Size = size
                OCT_FieldL.Description = txtFieldDescription
                OCT_FieldL.SubType = subtype
                OCT_FieldL.TableName = txttablename
                OCT_FieldL.EditSize = size
                If linktable <> "" Then
                    OCT_FieldL.LinkedTable = linktable
                    OCT_FieldL.Size = 8
                    OCT_FieldL.EditSize = 8
                End If
                IretCode = OCT_FieldL.Add()
                OCT_Application.SetStatusBarMessage("The Field " & txtFieldname & " is Added.", SAPbouiCOM.BoMessageTime.bmt_Short, False)
                If IretCode <> 0 Then
                    OCT_Application.MessageBox(OCT_Company.GetLastErrorDescription)
                End If
            Catch ex As Exception
                OCT_Application.MessageBox(ex.Message)
                System.Windows.Forms.Application.Exit()
            End Try
            OCT_FieldL = Nothing
            GC.Collect()
        End Sub
    Hope this will help you..
    Warm Regards,
    Mahendra

  • RME + Common Services + User defined fields

    Hi
    We have installed CSM and RME +  MCP and are going to use RME now
    Does anybody using the 4 "user defined fields" at Common Services ?
    If yes , which data do you write to the fields ?
    sincerley Alfred

    Hi Alfred,
    These feilds are for the user defined values for the device location or any other value that you want to define for the device. Later on you can use these feilds for generating customized Inventory reports etc.
    So, lets suppose apart from all the other information like ios version of device, SysobjectID etc that being collected during the pharse of Inventory collection by RME, there are some more feilds/tags that you want to defined for the devices, you can mentioned it here and later on you will have the option to run the query on the basis of these parameters to get the reports for your specific devices.
    For more information, kindly refer to the below User guide :-
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/invent.html
    Hope it helps,
    Many Thanks,
    Gaganjeet

  • How to provide value to a User Defined field thru java code

    I am using OIM 11.1.1.5.
    I have a user defined field called Unique-Customer-Number. This field need to be pre-populated during user creation (using OIM Web UI) and the value comes from a java code.
    Can any of you tell me the high level steps to implement this.
    Thanks!
    Kabi

    Thanks Rajiv,
    I just followed everything on metalink 1262803.1. My console shows the followings during Metadata import.
    weblogicImportMetadata.bat :-
    Starting import metadata script ....
    Please enter your username :weblogic
    Please enter your password :
    Please enter your server URL [t3://localhost:7001] :t3://10.10.99.99:7001
    Connecting to t3://10.10.99.99:7001 with userid weblogic ...
    Successfully connected to Admin Server 'adm_server01' that belongs to domain 'server01'.
    Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead.
    Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.For more help, use help(domainRuntime)
    Disconnected from weblogic server: adm_eimsdv1s01
    End of importing metadata script ...
    Exiting WebLogic Scripting Tool.
    How I will I know that my plugin/ event-Handler is registered successfully. Is there any screen where I can see all registered plugins ?

  • Confirmation of User defined fields on CO11N

    Dear All,
    Can anybody tell me how to confirm user defined field during operation confirmation of an order. I have created a user field key and assigned in the operation detail screen in routing. Is it required to include a freely defined screen for CO11N in customizing or any other setting is there.
    Thanks in advance for your valuable inputs.
    Regards,
    Uday Parchure

    <b>Define Customer-Specific Detail Areas for Single Screen Entry</b>The following enhancement is available for production orders:
    CONFPP07 define detail areas for single screen entry
    With this enhancement you can define your own detail areas (screens), which can be issued for single screen entry of time ticket confirmations.
    Enhancement CONFPP07 contains the following enhancement components:
    Function module exits
    EXIT_SAPLCORU_S_100 Transfer data from SAPLCORU_S to customer-defined screen
    EXIT_SAPLCORU_S_101 Return data from customer-defined screen to SAPLCORU_S
    Display documentation
    Screen areas
    Screen areas that you can define yourself are available.
    Activities
    1. Create the enhancement
    To do so, create a new project, or use an existing project.
    2. Activate the project.
    Your enehancement only takes effect after you have activated it.
    Further Notes
    Enhancememnts, as opposed to modifications, are fundamentally independent of releases since they are not made in the SAP original, but in a name space that is reserved for customers.
    you have to create a customer defined screen and attach as in the link. Add the Freely definable detail screen in OPK0.  Confirm the user defined fields.
    Regards
    MSR
    Message was edited by:
            Soundararajan Murugesan
    Message was edited by:
            Soundararajan Murugesan

  • User defined fields in Crystal layout

    Hi All,
    I want to add user defined field values in crystal  layout for Sales order, but its not listed in RDR1 tables there but it's available in SAP query manager view. How can i get that in Crystal reports. please suggest on this.
    Regards
    Sree

    You can then remove the key and the fields in the database will keep their correct definitions rather than varchar(max) which is causing the initial problems.
    Adding extra keys may uause performance issues if you leave them there for a large table.
    I have also had issues of varchar(max) fields causing database connection issues when running the reports in 8.81 PL07.
    Rob

  • Issue while deleting user defined field in oim 11.1.1.3

    All,
    Made a mistake while creating user defined field called "Profile for" (loing to OIM -> advanced -> configuration -> User configuration). We are trying to delete it. It appears to get deleted from user attributes screen. But when we run LDAP User Create and Update Reconciliation Task we get the following error below:
    oracle.iam.ldapsync.exception.ProcessLDAPReconDataException: oracle.iam.ldapsync.exception.ReconEventCreationException: Thor.API.Exceptions.tcAPIException: Profile for - LDAPUser object does not exists for resource object
    Is any thing else need to be deleted adn cleaned up?
    thanks in advance,
    Prasad.

    How do i check what resource object the recon task is running against. here is what i found so far.
    I cannot find LDAPUser resource object when i query Resource Management -> Resource Objects in design console. Same thing with Manage Resource and search (here i only find Xellerate User, Xellerate Organiztion, USERS_GTC, and Installation) in OIM advanced administration menu.
    The LDAP User Create and Update Reconciliation job itself has the following parameters (batch size, last change number, OIM employee type, OIM User organization name, OIM user type)
    I also decompiled LDAPUserChangesReconTask and it is looking for LDAPUser metadata from MDS directly.
    Prasad.

  • User defined field in SD and its link to Value field in COPA (??)

    Dear All,
    We have created one "Z" field i.e. user defined field and its in VBRP Table. This is a quantity field. to update the values in this field we have used an exit in sales and distribution module. Now, by defining this exit values are correctly populated in VPRP table on line item basis.
    Requirement here is we need to get this field in COPA, for same i have carried out the quantity field assignment to value field (KE4M).
    Even after this configuration profitability segment is not updated.
    Regards,
    Sayujya
    Edited by: sayu on Mar 15, 2010 10:13 AM

    In the past I did something similar and had to use function module EXIT_SAPLKEAB_001 in enhancement COPA0002 to populate the field.  To use this exit you'll first need to add a user exit id to your valuation strategy (transaction KE4U).  The help on the function module is pretty good, but if you run into a problem let me know.
    thanks,

  • Adding user defined field in print layout design of Bill of matrial Report

    I want to add "Drawing No" which is user defined field in Bill of Material report need immediate help .

    Hi,
    If you add the UDF in BOM-Title then the UDF will be in OITT table.
    If you add the UDF in BOM-Rows then the UDF will be in ITT1 table.
    You will find BOM-Title or BOM-Rows in Production Module (ie., in User Defined Fields --> Manage User Fields)
    In PLD, You can print the UDF if you search in the above said tables.
    Raja.S

  • How to change the text of a user defined field in dynamic selections?

    Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
    Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
    Found an OSS note - 86980 - that tells that this is not possible.
    But when we read the documentation on the user field (CJI3 - dynamic selections  - double click on user field - F1), it shows the following text:
    User-defined field in which you can enter general information with a length of up to 20 characters.
    Dependencies
    The names (key words) for  user-defined fields depend on the field key.
    Now the question is where to change the field key..
    Thanks,
    Ven

    Madhu - you did not get the question I think.
    Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
    Thanks,

  • User-defined field in existing table

    Hello,
    I would like to know if it is possible to add a user-defined field in an existing table.
    Actually, I would like to add a combobox with other types of partners than vendors, customers and leads and add a user-defined field in the OCRD table.
    Thank you
    Regards,
    Thibault

    Hello,
    Your answers help me a lot !
    My code is working, i.e. when I create a new BP and choose another type in my comboBox, the information is saved.
    When I search a BP who has this type, SAP find the good BP.
    But, I don't see where the data is stored, I don't see anything which make the difference between 2 BP with 2 different types in the OCRD table.
    So, where SAP can make the difference?
    Thank you
    Regards,
    Thibault
    Message was edited by: Thibault Romieu

Maybe you are looking for