User ID specific VA01 / VA01 settings
Hello,
I want to set a Transaction Variant for a specific User ID such that in the transacitons VA01 / VA02 / VA03, in the sales Tab screen , the user should be able to see more no. of lines than existing.
I think this can be done by hiding General header data.
Can someone provide info in this regard?
regards,
Omkar S. Phatak
91 9850907344
Hi,
Try with T code - SHD0
Please confirm it works or not.
Br / Prashant
Similar Messages
-
User-exit in VA01/VA02 to add order item and condition price
Hi experts,
I have an urgent requirement to add an order item and pricing for VA01/VA02 when certain logic are met. Do you know a user-exit in VA01/VA02 to add sales order item and condition price for an order?
I am currently using user-exit USEREXIT_SAVE_DOCUMENT_PREPARE but I can only add the required order item to xvbap but I also need to add a condition code and condition price for the added item (in xkomv). Your response are very much appreciated.
Thanks in advance!Hi Leo,
Check out few more exits:
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
SDAPO001 Activating Sourcing Subitem Quantity Propagation
Reward points if this helps.
Manish -
User exit in VA01 for changing the status profile
Hi Experts,
I want a user-exit in VA01 wherein i can change the status profile (Screen field name = JOSTD-STSMA ) based on some logic.
Thanks in Advance:-
SantoshHi, Santhosh,
You can use function module "STATUS_PROFILE_CHANGE"
see the code,
CALL FUNCTION 'STATUS_PROFILE_CHANGE'
EXPORTING
OBJNR = XVBAK-OBJNR
STSMA = G_STATUS
NO_CHECK =
EXCEPTIONS
OBJECT_NOT_FOUND = 1
NO_STSMA_CHANGE_POSSIBLE = 2
STSMA_NOT_FOUND = 3
OTHERS = 4
where G_STATUS is your new status profile. It will update in your screen also.
Hope this will help u. -
Hi,
I got a problem in the user-exit of VA01. when we are copying data from request with quotation then the items all are copied and in edit mode.
but in the item list we have to get item category in display mode how to make display mode of the table control. i know the logic to make table control field to display in general. but i dont in userexit how to call screen and all can any one know of the userexit for the screen and i have to configure this user-exit in spro "opy control routine".You would have to test, but I think you can do it with user exit MV45AFZZ.
In the form USEREXIT_FIELD_MODIFICATION, you could add something like...
if sy-tcode = 'VA01' and " order create
vbak-vgtyp = 'B'. " quotation preceding
if screen-name = 'VBAP-PSTYV'.
screen-input = 0.
endif.
endif.
You might also want to check <b>if not vbak-vgbel is initial</b>. I believe this is the reference document. -
Hi experts,
while preparing order in va01 user wronly enter value for zvat in condition , for eg : zvat is 12% but user given 4.5% and save order, i won t allow to save this type of order. kindly give any solution for this.
Regards
G.Vendhanhi
you can have a look at all the user exits available on this thread
Re: User Exit for va01
hope it helps
regards
Aakash Banga -
User exit for va01 (schedule line )
hi all,
Pls tell me how to use user exit in va01.when user add material and select schedule line for that material he has to add CP/CN .but when user put CP it will give message that CN is default pls enter CN.like these msg i have to give.pls give me solution.
Thanks,
NitinHi Nitin
Try userexit_move_field_to_vbep in MV45AFZZ
or userexit_check_vbep in MV45ZAFZB.
check vbep-ettyp for the schedule line category and write the logic.
Kuntal -
User exit for va01 on save event
Hi
Can you tell me with user exit is there for save event in VA01.
cheers
AJHi,
USER EXITS for VA01
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Regards,
Prashant -
User exit for va01/va02 for std program
Hi ,
how are u all....
here is my problem...
i created a customized screen for va01.
this screen gets called after user saves the order.
in this screen i provided 4 options .
1. accept the order
2 change the order
3.reject the order
4 release unconfirmed.
i am calling this screen in user exit userexit_refresh_document.
before this am capturing the order number .
once user clicks on first radion button i.e on accept.
then i am passing the order number and removing the block using BAPI_salesorder_change.
but here bapi is passing the error message as plese enter the order number ....
my doubt is the userexit whr am calling the screen is correct ?
can we do the same using BDC ..?
if anybody working actions on user entry for va01 and va02..
please let me know whr and how u r writing the code... sooon
thx in advance...
regards
sanjaywhat are u doing ? , u cannt call BAPI in the same user exit.
if user accepts the order --->then u have to unblock the order ?
then u have to activate Credit Control User exits ->SPRO->SD->System Modifications>Credit Control User exits.
regards
Peram -
User Exit for VA01 - Delivery Block
Dear Friends
I wanted to do a User Exit for VA01 which should set the Delivery Block = Credit Memo as default for a particular user.
Can anyone give me the solution.
REg
S.K.RajHi Kamaraj,
First of all u have to find out the perticular exit for make the changes, after that take one field TBTKZ which is flag for decit /credit memo. Based on the condition that flag set as 'X'. If that flag set as 'X' then populate the data.
Here it ishow to find out the user exit.
execute the following report and enter the t-code VA01 it will display all the exits. then search them by seeing coments..
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Hope this helps you..
Regards,
Kumar. -
User Exit for Va01[ Return Order ]
I Have Written User Exit for Va01[ Return Order ] in MV45AFZZ,
I'm Making tax field VBAK-TAXK1 as 0 when making this field as 0 Pricing Condition Tax calculation should not be exit and tax value must be 0.
How to do this process...plz give me a solution.Hi
For price calculations or modifications, you may have to write the code in SD routines. Check this T.code VOFM.
Reward if it helps!
Krishna -
How can know which user accessing specific form in ERP application
Hi,
In our organization we have ERP application that is developed based on Orace forms and reports 10g.
My question is how can i know which user accessing specific form in ERP application based on their login.
Please do the needful.
Regards,
M. SatishWhat I infer from your statements now, significantly different from your OP, is that you do not have any logging mechanism and now want to introduce logging with minimum effort.
If that is the case you can add the logging code in your Menu(s), before the CALL_FORM/NEW_FORM. Fewer object(s) to modify, but roughly the same lines of code get added.
Regards, -
I have bought a iphone 5s and i am not able to send pictures to android user. how do i change settings in my phone so i can do that.
If you are talking about sending photos via messaging then:
Have you turned on MMS Messaging in Settings?
See Settings > Messages > MMS Messaging and turn this ON. -
Access level to users at specific fields
Dear Techies,
I am new guy In BO and also to this forum icon_smile.gif
I am designing my universe and now i little concern
I want to design one universe for 5 departments in company
and then i want to give specific rights for users for specific fields in the universe level
any best way / solution there...
any suggestion / help / link / tutorial would be highly appreciated
regards
Nadir FirfireHi,
You can deifne metadata restrictions for group of users in the universe.
In Universe Designer, select the "Tool" menu then the menu option "Manage Security" and finally menu option "Manage access restrictions".
Then click on "New" button to create an access restriction and select the "Object" tab.
Last you have to associate the restrictions to users or group of users.
Didier -
SCCM 2012 Report that shows the users with specific software installed
Hi,
Is there a report in SCCM 2012 that shows the users with specific software installed? The report should show username, machine name and the software name. I am looking for a report that shows the users with the following softwares installed:
1. Adobe(all versions)
2. Photoshop(all versions)
3. MS Project(all versions)
4. MS Vision(all versions)
Regards, Lorin DavisTake a look at the Asset Intelligence reports in the software section. You may get a list of computers with a product installed, and you might have to use that list to find the primary users based on user device affinity.
-
My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?
Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work
Maybe you are looking for
-
Rebuilding partitions indexes takes a lot of time
We have 5 partitions in one table with the following sizes: P1 ---- 160MB P2 ---- 160MB P3 -- 1280MB P4 -- 5400MB P5 - 24640MB Nobody is connected to the instance, no apps is running on this server, the server is dedicated to the database and only fo
-
LR4 Flickr plug-in 'could not contact Flickr web service' - has nobody solved this problem?
G'day All, I know i'm not alone. LR4 is now telling me it cannot update (Re-Publish) images successfully uploaded only an hour before via the native Lightroom publishing service. Here's the plug-in diagnostic: Plug-in error log for plug-in at: C:\Pro
-
Mighty Mouse Functionality in Bootcamp?
Hi, I use a Macbook 2.16ghz with Vista in Bootcamp. When I use the side buttons on my wired mighty mouse in Windows Vista, it activates as some sort of back button or "click" for whatever prgram I'm using. Does anyone know how to change the functions
-
Our school has a lab of 35 new Intel Macs. Some have begun to have programs start when the computer is booted up. Not all the programs are the same. I have checked the accounts for start up items and there is nothing in the list. How can I stop progr
-
I just signed off AT&T and people who send me an email are now getting a mailer daemon. I contacted AT&T and they deleted me completely from their system, but people are still getting a mailer daemon every time they send a message. There must be a