User in multiple groups gets multiple copies of one mail

I have a user who is the manager in a department with multiple groups in it.  There is an email group in eudora set up for each administrative group (logical), and the manager's user is in each of those groups (also logical).  Frequently it will be logical to send an email to 2, 3 or 4 of those groups, and then (just as you would expect) she gets 2, 3, 4 copies of the email in her inbox.  Which falls into the "just what we asked for but not what we want" category...
Does anyone know how to get mac mail or eudora to do "de-duplicating" ?  Or are we just stuck with this?

Hi..
Ok, so forget group mapping from AD. What you have here are two seperate network services that require individual provisioning... what I call "Service Differentiated Provisioning"
This is where Shared RADIUS Authorisation Profiles come in (I know because I deisgned them :)
Create a NAF for each device - simplest by using their IP addresses.
Next create two shared RACs - one for each service (mobile & home). Inside use RADIUS attributes to assign the ip pool depending on your RADIUS vendor (Cisco?)
eg cisco-av-pair = ip:addr-pool=poolA
Next create the two NAPs - one for mobile access and the other for home access by selecting the appropriate NAF to activate on. Select the authentication types (MSCHAP) and databased (Windows)
Next, edit the Authorisation part of each NAP. Uncheck the tick boxes "Include attributes from user & group records" - this will merge attributes from group, RAC and user... gets MESSY. Anyway you should see a default rule displayed "If a condition is not defined...." - in the Shared RAC dropdown select the RAC that is appropriate for the NAP (ie mobile or home). Then submit.
At this point to avoid clashes... remove any ip allocation settings in the ACS groups A & B.
You should now be able to authenticate users on each network service. They will still map to an ACS group (as before). However the ip pool allocation will now come from the relavent RAC instead of a group.
It may look complicated (um, guess it is) and the NAP pages are not very friendly, but if you work through these steps it should work a treat.
If you run CSRadius -z -p from the command line you'll see all the extra helpful debug I put in :)
Now all you need to do is download the trial of extraxi aaa-reports! (www.extraxi.com) so that you can generate reports to audit the fruits of your labours!
Good luck
Darran

Similar Messages

  • How to print multiple copies on one page ?

    How to print multiple copies of one document on one page ?
    in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
    how do I make the same operation in Indesign.
    thanks

    Hi, Peter S.
    >I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
    * It's just an alternative to copy/paste and step/repeat.
    * For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
    Regards,
    Peter Gold
    KnowHow ProServices

  • The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers.  This is only happening on my Macbook not other macs.  Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted problem continues

    opps.  Long title there... The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers.  This is only happening on my Macbook not other macs.  Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted those.  Checked for software update and installed suggested downloads.  Problem still contintues.  Any suggestions?

    Folks,
    even after having repaired the inbox folder under "properties" a few times, I still had some e-mails where the contents are different from the subject line.
    In other words in the inbox there are two e-mails: one with subject line "abc", and another one with subject line "def".
    When I display the e-mail with the subject line "abc", the contents are from the e-mail with the subject line "def" in the in-basket.
    What else can be done to correct this problem?
    Thanks and best regards.
    Fred Kunz-Shirzad
    Chemin Ronzeures 6A
    1297 Founex VD
    Switzerland
    [email protected]

  • HOW DO I PRINT MULTIPLE COPIES OF ONE PHOTO ON A SINGLE PAGE?

    Since Apple has not made this feature available, I am not able to print multiple copies of a single photo on one page. HELP suggested I download Portraits and Prints which I could use for free. However, I have downloaded this and note that DEMO watermark will appear on all photos unless I purchase the program. Is there a way to print without the DEMO watermark using this program or is there another free program that will allow me to print multiple copies of a single photo on a single page? Please help as I have spent 2 hours on the phone with Apple and it has gotten me no closer to a solution - something I could easily have done on the older versions of I Photo. Thanks!

    Sadly, I have no pull down menu when I click on Customize or settings? I am using IPhoto 08 vers. 7.0.1. I was told by Apple HELP that this feature is not yet available, even though the instructions say to do exactly what you have said. But there is no pull down menu and no option to print multiple photos. It says print a single photo and it is clicked and I cannot unclick it. Any help would be appreciated. Do you actually have a pull down menu with Print Multiple Copies of One Photo as an option? What version of IPhoto provides this? Apple seems to think it is not available and it certainly isn't available on my system. Any help will be appreciated. Thanks.

  • Getting 2 copies of all mail??

    Im getting two copies of every mail item - where should I look to correct this? Thanks

    Mail preferences is a good place to start. Check your accounts and if needed re-enter the settings as needed. You also might want to work with your ISP, it's possible there is an issue on their end.

  • Multiple copies of one photo in Aperture

    Hi,
    I have just bought Aperture, and I'm dying to get started. However, a very basic thing annoys me quite a lot. I would like to make an Album with photos I can perform experiments on, but no matter what I do, the changes also apply to the "originals" in the Event from which they were taken.
    Isn't there an easy way to have multiple copies of the same photo in Aperture? I guess the solution must be simple, but I just can't figure it out.
    Thanks,
    Michael Knudsen

    Michael,
    Either use the Command to Duplicate Version, or New Version from Master depending upon whether your experiment needs to start with the latest edited version, or from the scratch position of the Master. Then you can either Remove the original version from an Album if already there, or move the new version it to a new Album as desired.
    Ernie

  • Printing multiple copies of one photo on one sheet

    Since I don't find this on the forum, I must be the only one who can't figure out how to do this, but before I upgraded, when selecting "print", I could also select how many photos per page, and I could print out one page with more than one copy of a photo. For example a whole sheet of wallet size, or two 5X7s on the same sheet. I can't find this selection option any more. Where is it?
    Thanks,
    Quonkeree

    If you go back there is a solution (workaround) that as I remember involves picking the photo you wnat to print multiple copies of and other photos to bring the count up to what you want to print (2, 4, 9 etc) then somewhere down the way in the print process replacing the photos you used a placeholders with the one you want to print giving you multiple up of the same photo - I have NOT done this but it was described sometime recently on this forum - try a search
    Larry Nebel

  • How to attach multiple file in one mail

    Hi,
    I've problems with sending multiple files via Gmail account (Ipad version)  When sending the photo or video, I've to just click the photo and choose send to mail one by one. Any simpler way?  Sometimes i did sent both mpg and jpg but the reciepient didn't see any attachment too
    Anyone can help advise how to attach different file (doc, video, photo) in one mail will be a lot appreciated. Thank you so much

    You can attach multiple pictures to an email on an ipad2. Don't know about original iPad.
    Choose a photo or take a screen shot (hold down home button and button next to volume control at same time--screen shot now will appear in photos).
    Go to photos and edit your picture or screen shot, save it, then hold down on the image and copy it.
    Go to mail, create a new mail and paste it in.
    Save you mail as a draft.
    Go back to photos and select a different photo, copy it, and return to your draft, and paste it in. Repeat if you need to add more.
    Anything that you can take a screen shot or have an photo of can be pasted in one at a time into that draft email.
    If mail gets uncooperative, during this process, then double click on home button and quit multitasking mail, then open up mail again and send your draft. Uncooperative means gets frozen.

  • Why do i get 2 copies of outgoing mails in my sent folder

    I have used one e-mail account (eclipse.co.uk) for years. I recently added two more. With one (Hotmail.co.uk) whenever I send a message I get two copies in the 'Sent' folder. This does not happen with the other accounts.
    On the third account (plus.com) some of the incoming messages appear twice in the inbox. This doesn't happen on the other accounts

    I made a big mistake ! I am using Thunderbird Mail not Firefox.
    I took your link and found an answer to the two messages in the Sent folder but didn't see anything about duplicate incoming messages.
    I recently transferred to Plusnet. On the first day 5 messages to me on my new address, all from them, only appeared once. Subsequently all messages from them appear twice. Messages I have sent to myself only appear once.
    Thanks for your help - sorry about confusing the original request for help.

  • Mail Delivery Subsystem sends multiple copies of returned mail

    Since installing Leopard, I've sent several messages (usually with attachments) that are undeliverable to the recipient. Problem is, I get dozens of copies of the same "Returned mail: see transcript for details" message, last time about 80, each with multiple MB attachments, and the net effect is to slow Mail down quite a bit. Very annoying. This has only happened to one specific recipient who is with sbcglobal.net, but I'm not sure if its their problem, or mine.
    Any thoughts? Obviously, I've stopped sending messages to that particular address, but it may occur again.

    @ Tokyodj
    Thanks very much for posting this. I was having slightly different issues than the people above - only one of my two POP accounts was being constantly picked up, and I had hundreds of versions of each email... strangely, even after I went to the (Yahoo) account and deleted all the emails out of there. Your solution worked perfectly.
    Thanks again!

  • Users sends multiple emails for one email to be received

    I have a user who states that she has to send multiple emails to a customer before she one is able to get through.  She doesn't receive a bounce back from them.  I recently suggested she remove an images from the emails, we have a corporate logo
    that can be used in our signatures, as many of her customers are government and I figured they may be blocking the emails for this reason.  Nothing seems to have helped and she still seems to be having the issue.  This also occurs sometimes for some
    of her customers and other times with others, so it doesn't seem specific to the customer.  I have repaired Office and run a virus scan, the scan came up with minimal malware and removed it.

    Hi,
    Please follow these steps to create a test email in Outlook and send out:
    1. Open Outlook, click New Email.
    2. In the new window, edit To and Subject fields.
    3. Click OPTION, check Request a Delivery Receipt.
    4. Then click Send to send the test message.
    Please check whether the test message is listed in the Sent Items folder or not. Also waiting for the Delivery Report of this message.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Installing multiple copies of one printer (HP1102W) on the same computer

    OK here is the setup, we have an activity that needs, useing multiple computers, to support 2 different locations with the same physical printer, in this case the HP1102w.
    Our computers are running Window 7.
    We will move the printer between the locations for use on different days of the week and want to avoid reinstalling the print driver each time we change sites.
    Each site has its own wireless network with the same basic wireless network setup (ip address etc , open network). Fortunately the same IP subnet 192.168.1.0 but with different SSIDs.
    We have setup the printer at both locations but we have to make configuration changes to the setup to support the different SSIDs which is a pain that is subject to errors.
    What I am thinking of doing is to install the printer at each location using the smart install. This will create two different instances of the printer on each machine.  Is this possible or will they get in each others way?
    Can I do this and then just change which printer is the default machine at that site? 
    Will this work???
    If not what alternatives do I  have.
    Thanks
    Marty K

    I think theoretically that will work.  You will just have to reconnect the printer to the router each time.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Multiple copies of e-mails in the wrong family account.

    I have a family account for MobileMe set up with only two accounts, one for my wife and one for me.
    MobileMe syncs 3 computers (iBook, new MacBook and a 24" iMac all running OS X 10.5.6) and an iPhone 2.5G and an iPod touch.
    When an e-mail is sent to my wife, it appears 3 times in my InBox and not at all in her InBox. Messgaes sent to me only appear once, correctly, in my InBox.
    Has anyone any ideas about what could be causing this? For instance, does having 3 computers have some bearing on it?
    John

    A further thought is that multiple e-mails in the wrong InBox only occurs when the sender has a mac.com or me.com account. I have noticed that "outside" e-mails addressed to my wife go into her InBox correctly.
    But this may not be true of all e-mails.
    Also, after making some changes to my Mail prefs, I am now only getting 2 e-mails in the wrong box!
    Note: I was reducing the choices for incoming mail servers. No smpt.mac.com. Only smpt.me.com.
    John

  • How do you print multiple copies of one photo on a page in iPhoto '08?

    I've tried everything that I can think of, yet no success.
    It used to be so easy in '06! As you changed the settings for n-up, it would show you a live preview as well!
    Has anyone found a solution to this? If it is not possible, it is a GLARING omission.
    Thanks for your help.

    Flugel:
    Welcome to the Apple Discussions. That feature has been dropped from iPhoto. You'll have to use a 3rd party application like Portraits and Prints that should be able to do what you want.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Message was edited by: Old Toad

  • Receiving Multiple Copies of e-mail on my Blackberry

    I have had this problem since I started receiving e-mail on my Blackberry.  I have spent hours on the phone with Bell Tech Support and tech support for our hosted outlook exchange service.  Both keep pointing the finger at each other and have not been able to come up with a solution.  I use BIS to receive e-mail on my Blackberry.
    Here's what's happening.
    When an e-mail is received at the exchange server a copy is sent to the Blackberry.  When I open or reply to the e-mail from my desktop using outlook or if I access the e-mail via the web a duplicate copy of the original e-mail (not a reply copy) is sent to my Blackberry as if I am receiving the e-mail on my Blackberry for the first time.  This happens every time an e-mail is opened or replied to from my desktop machine or via the web.
    Bell suggested there might be corruption of my mail account on the server and wanted them to delete and recreate my mailbox.  Instead I created a new test mailbox on exchange and added it to my Blackberry. The same thing happens with the new test account so it has nothing to do with corruption of my original e-mail account.
    I've deleted the e-mail account in BIS and recreated it a number of times with no different results.  I've deleted and downloaded the service books a few times.  Nothing seems to work and I have both providers pointing the finger at each other while I drown in duplicate e-mails.  There are NO forwarding rules in place for the e-mail account or automatic cc'ing or bcc'ing.
    Any suggestions would be appreciated.

    The workaround is as follows:
    1. log in to BIS
    2. set up a new account
    3. enter email ONLY - do not enter the password; hit next
    4. choose "I will provide the settings to add this email account."; hit next
    5. choose "This is my work email account."; hit next
    6. Yea! Now you can choose "I can access my email account using a Web browser (Outlook® Web Access)" and hit next
    7. Fill in the web access url (remember the https if it's secure), user name etc.; hit next

Maybe you are looking for

  • Video From Motion Shows As 16:9 in DVDSP - Plus

    Help!! I've created a Motion project using the "NTSC DV" preset and when I export it out as a Quicktime (either straight from Motion or via Compressor) and import it into DVDSP, DVDSP sees it as 16:9... is there an anamorphic checkbox I'm missing in

  • How do I get camera raw page open

    How do I get the page to open in Elements 10 that has the histogram and sliders for contrast, exposure, etc?  I can't find it anywhere.  All I can get to open is the edit page that shows apples

  • FCP to Premiere -- EDL anyone tried?

    I've often suggested sending an EDL out of FCP to work in Premiere, but I've never tried it. I'm wondering who has and how sucessful it was. What transfered? Motion? Transitions? Scale? How easy was it? I must do a retirement video and then give it t

  • I have a psc 1510. how do i get it to not print a test page every time i turn it on?

    I would like the PSC 1510 to NOT print up a test page automatically every time I turn the printer on. I don't do a great deal of printing, so I don't want to waste paper by having an extra page printed up evry time I want to just print up a couple of

  • Parent Job Order & Childs

    Dear All I have a Bill ot Material for an Item containing 6 Levels including many Phantoms ,Raw Materials and Subassemblies I would like to create a Job order for the Parent Item only and child Job orders created automatically for all Subassmbly Item