User In Planning unit Hierarchy unable to see data form in editable mode

hi all,
we are facing a problem in planning unit hierarchy in Hyperion planning, where we have 4 users, Hierarchy is define as
hierarchy: budget approved
version: approved
Entity: Finance
Senario:Budget
haroon asghar ( owner)
adeel javid (Reviewer)
Naeem asghar (Reviewer)
Imtiaz (Reviewer)
Issue is that,after start the budget activity (promotional path) by Admin, the data form editable to Owner haroon asghar
but after completing his work by haroon,when he promote the planning unit ,the next user in Hierarchy "Adeel javid" unable to see data form in respective planning unit in uneditable data form not only for this user but all rest of the users as well,while i think data form should only uneditable(grayed) for user Haroon Asghar who promote the planning unit.
we have checked all security rights to the users those are "Write access" but still Adeel javid is unable to enter data,so the budget activity is stop due to this problem.
when i remove the planning unit then i log in with all user one by one and see all data form required version,scenario and entity were editable to all users mention above
we want to run budget activity with the above planning unit hierarchy.
plz any one provide the proposed solution of the said issue
we are using Product Version 11.1.2.0.00
Regards
Anwar

Reviewers will not be able to write data to the intersection. Reviewers can only review the data and follow-up with a Reject, Promote, Sign off, Delegate, Originate or Freeze.
Please refer Article ID 1226783.1 in MOS.
HTH-
Jasmine.

Similar Messages

Error While Opening dataform after creating Planning Unit Hierarchy

Hi All,
I created a Planning Application through classic wizard. Then i created a planning unit hierarchy, after which I am getting the following error: (when i try to open a dataform, from some user other than admin/owner)
*"Security and/or filtering has resulted in a required dimension not being represented on this data form"*
I know that this error occurs when some dimension members are represented on dataform but are not assigned with security rights. But thats not the problem in my case. Because I assign security rights to all members of all dimension just for the sake of testing. I later on identifed that this error occurs due to dimensions present in POV i.e. I need to select a single member of each POV dimensions, then in such case this error disappears.
Now my question is that why i need to select a single member from each POV dimension? I general i leave POV dimensions as it is, while creating dataform
Right now i aad a dummy member at the top of each dimension, e.g Account_UnSpecified, Entity_UnSpecified and so on . . . and then i select this member from each of POV dimension.

Hi,
You can try creating new Root folder and new workspace for your NWDS.
1. Create a new folder with name ' <userID>_NWDS_NEW_ROOT ' in your machine
2. Create a new folder with name ' <userID>_NWDS_NEW_WORKSPACE ' in your machine
3. Open NWDS (and logon to DTR)
4. Remove all configurations from your Development Configuration perspective (except 'Local Development')
5. Go to Window --> Preferences --> Java Development Infra --> Development Configurations
6. Change 'Root Folder' to the folder created in step-1
7. Close NWDS
8. Create ' Run_NWDS.bat ' file in your NWDS installation folder which has 'SapIde.exe' file
(it will be generally in --> C:\Program Files\SAP\IDE\IDE70\eclipse)
9. Type following in .bat file -->
SapIde.exe -data "<complete path to folder created in step-2>"
10. Now double click on this .bat file to open NWDS
Now logon to DTR, import configuration, create project from 'inactive DCs' and you should be able to create project and see it in respective perspective.
Regards,
Amey

Planning Unit Hierarchy - multiple owners per Entity

Hi there everyone
I have the following scenario and hope you can help me out with a few ideas:
I have a planning unit hierachy set up. It works well except for one thing - the fact that you can assign only one owner per entity member. The business essentially has multiple owners for most entities. Ownership is determined by which accounts the user is responsible for. An example:
User 1 is an owner for Entity A, but only for accounts 111-444.
User 2 is an owner for Entity A, but only for accounts 555-777
User 3 is an owner for Entity A, but only for accounts 888-999
As far as I can see in the Edit Planning Unit Hierarchy screen, I am able to assign User 1 as an Owner for Entity A on the Assign Owners tab and I can specify accounts 111-444 in the Primary and Subhierachy Selection tab. Since I can only assign one owner, how can I now provide for User 2 and User 3 requirement?
I'm using version 11.1.2.1. Any workarounds or suggestions would be highly appreciated!
Thanks
Juanita

I had a similar business case in my previous project. There was no direct solution to this. But we had to stick to a workaround ( not a very nice and comfortable solution, but we were under critical timelines).
User 1 is an owner for Entity A, but only for accounts 111-444.
User 2 is an owner for Entity A, but only for accounts 555-777
User 3 is an owner for Entity A, but only for accounts 888-999
make a secondary hierachy with different entities i.e. User1_EntityA,User2_EntityA
Entity A
User1_EntityA
User2_EntityA
and then you can assign different users to all these entities. One major drawback with this is, if we have 100 entities with 10 users .. that will make 1000 more members.. anyhow we did it that ways.. if you get a better solution you can post it.
Thank You
Sandeep Kumar Upadhyay

Users and Group Owners are unable to see their groups

Hello all,
I have an issue where security group owners are unable see/read any groups that they own. I have enabled the following MPR's but still nothing please help.
Group management: Group administrators can create and delete group resources
Group management: Group administrators can read attributes of group resources
Group management: Group administrators can update group resources
Security group management: Owners can read selected attributes of group resources
Security group management: Owners can update and delete groups they own
Security group management: Users can read selected attributes of group resources
Also when a user logs into the portal they are unable to see any Security groups listed under MY SG Membership. However when we check the group membership they are indeed part of the group both in FIM portal
and AD.

Reason might be that user's don't have access to group objects at all or are not able to read some of attributes of a group. Also make sure that BasicUI keyword was added to the specific elements of UI used in group management - this includes navbars but
also search scopes which are used for group filtering.
On the MPRs side:
Make sure that your Security group users set was not modified - maybe people are filtered out from these MPRs.
Use explore function in MPR part of a portal to check what actual MPRs are being triggered when user tries to access group object.
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl
Hi Tomek,
Which attributes must a user be able to read in order for this to work? If possible can you provide me with a full list so I can verify that they do have rights to read them.
I have added the keywork BasicUI to the following sections
Under Home Page Resource
Join a SG
Manage my SGs
Search Scopes
Security Groups (SGs)
See my SG memberships
Under Navigation Bar Resource
My SG Memberships
My SGs
Security Groups (SGs)
As for the security group users set, I have modified it to allow all domain users to be part of this set. When I click View Members all users are listed.
"Use explore function in MPR part of a portal to check what actual MPRs are being triggered when user tries to access group object. " How would somebody go about doing this?

Org unit Hierarchy structure at Key date

Hello Friends,
We have an issue with displaying HR Org unit hierarchy structure between two calendar months.
The BI Report has a selection parameter to select Org unit hierarchy , Calendar month From and Calendar month To
The BI Report is to display the no.of sick absence days for employees in a chosen Org unit hier.
Employee A had a sick absence of 5 days in the month 04.2011 in the Org unit X . The same employee had a sick absence of 4 days in 05.2011.The Org unit X then delimit in 05.2011 , the Org unit X is no longer in Org structure from 05.2011.
When we run the report for 04.2011 to 04.2011 , the employee A is showing absence   under Correct Org unit ie X with correct Org structure .
When we run the Report for 05.2011 to 05.2011 , the employee A is showing absence under hierarchy Org unit Not assigned which is OK .
But the issue is when we run the Report from 04.2011 to 05.2011 , The employee A absence days 9 (5 +4 ) showing under Not assigned Org unit hierarchy structure which is the latest Org unit .
When I deactivate the Org unit hierarchy and choose tech name of Org unit , It is showing correct Org unit key
But The user would like to see 5 days under org unit X and 4 days under Not assigned with Correct Org unit hier structure when we run the Report from 04.2011 to 05..2011 .
We have a user Exit variable for the Key date in the Bex Report which seems to be taking only one date at any time .
Is there any way to get the correct figures under Org unit hier structure where employee had absence in when we put range of calendar months on a selection screen ?
Any advice appreciated.
Thanks.

Hi,
You can try adding two more attributes to Org Unit as "Calender month from" and "Calender month to".
In these attributes maintain the validity period for the corresponding master data.
For example, in your case you can maintain the master data as:
Employee | Org Unit | Calender month from |Calender month to | sick absence
A | X | 4.2011| 4.2011 | 5 days
A |    | 5.2011 | 05.2011 | 4 days
And in report use variables for Calender month from" and "Calender month to".
Hence, when user executes the report with selection as:
Calender month from" = 04.2011
"Calender month to"    = 05.2011
The data will be read from master data based on these selections along with key date and report will show output as expected.
Employee | Org Unit | Calender month from |Calender month to | sick absence
A | X | 4.2011| 4.2011 | 5 days
A |    | 5.2011 | 05.2011 | 4 days
Hope this works for you.
Regards,
Geetanjali

Unable to see data in Table in smartform

Hi all,
I need to create a smartform where I have to print the header details at the start and then below that details for all line items for a particular document.
so i have data ;ike :
Header data :
field 1 : field 2:
Field3 : field4:
field5: field6:
Item data :
field1 field2 field3 field4 --> Item 1
field1 field2 field3 field4 -->Item 2
field 1 field2 field3 field4 -->Item3
For the Header data,Im planning to use a template in a secondary window.
However for the item data,i need to use a table (As i know the no of records only at runtime).Also another reason for usng table would be that I dont need the header on each flloowing page but only the Line item details on the following pages.
Now my ques is :
1.I hav ecreated the form and put some constant /texts to just test the form.I am able to see the texts/data in the header data.However Im unable to see the data for the Item i.e. in the TABLE.
I have used template for Header details which I can see.
I dont know what Im doing wrong.Is it because in the DATA tab under TABLES,I have given an interna table but there is no data in the table?
I have defined only 1 line type in my table an dthat has 4 cells (as I need to print 4 item fields under the Item data)
PLease let me know what I am doig wrong because of which Im unable to see the item data in table form.
Thanks!

Hi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks

Unable to Access Data Form with Users Provisioned as 'Planner'

Hello,
I am currently experiencing an issue that I can't seem to resolve. I was hoping someone else might have some insight and/or have come across this issue.
I created two data forms. Users have been assigned permissions to the dimensions included in the data form. I have also assigned users access to the data form. The model is a single currency model.
Upon logging into the application, the user is unable to open the data form unless he/she is provisioned as an 'Administrator'. Provisioning the user as a 'Planner' or 'Interactive User' does not allow the user to open the data form. The following message appears:
*"Security and/or filtering has resulted in a required dimension not being represented on this data form."*
My data form uses the following dimensions:
POV: ELEMENT
PAGE: SCENARIO, YEAR, VERSION, ENTITY
ROWS: ACCOUNT
COLUMNS: PERIOD
We are currently implementing Hyperion Planning 11.1.2.0. The operating system is Windows Server 2008 64-bit R2.
Any advice/suggestions on how to resolve this would be greatly appreciated. Thank you.
Corey

I went ahead a created a data form that just used level 0 members and confirmed that the user had access to the members defined in the form. Still no luck.
I also checked to make sure the filters existed in Essbase. Here is what I found in Essbase:
Access: None
Member Specification: @IDES("Account"),@IDES("Scenario"),@IDES("Version"),@IDES("Entity"),@IDES("NTTA_ELEMENT")
I have no issues accessing the data through the Essbase Add-in.
I did notice some additional items in my Planning setup:
1. Task>Manage Process - Sub-Status states 'Failed' when I attempt to validate
2. Task>Manage Process - Status changes from 'Not Started' to 'Under Review' when I start the cycle.
3. Dimension Security - Users are attached to a group that has write access at the Descendent(Inclusive) level.
4. In the Account, Department, Scenario and Version dimensions I also setup the user to have write access at the member level.
As for my earlier post with the data forms, that was just my way of showing the dimensions used. I do have two data forms, 1) with top level and descendants/children and 2) with level 0 members only.
I checked the logs and there isn't really much info there. I have a case open with Oracle and a webex scheduled for tomorrow.
Thoughts?
Thanks
Corey

Users are not seeing Data Forms

My Planning users have started reporting an issue today - every now and then, they cannot see the data forms. When they click on a data form, it just won't load. In a couple of cases they reported not even being able to see the data form itself to be able to select it.
I believe the issue might be related to the fact that the installation is completely on one box, and we now have 4 Planning applications running, with 80 total users. Version is 11.1.1.4.
Any ideas as to what the causes might be, or what you would do in this situation, (until I can convince them to buy another box?).
On a related note, I usually don't advise anything more than 2 applications per box, especially in the case of a non-distributed environment. Any thoughts on this ?

Thanks John - and you bet - the CPU and RAM were constantly at 100% or near when this was happening. I already suggested splitting up the 4 apps over more than 1 box, but that is probably not happening till August. Until then, was wondering if there is anything I could look at in the meantime, a temporary fix if possible.
Thanks.

Unable to see data in the report or workbook

Hello All,
We are struggling to display data in the report level or workbook, however the data is available in Multiprovider.
Error Message: "No Applicable Data Found"
Steps Carried Out:
1. Dropped the BIA Indexes for relevant cubes and Reactivated the Multiprovider, still did not work.
2. When we checked for previous years like 2013, we are able to see data in the report. To elaborate an issue, we loaded budget data for year 2015 as requested by user. Restricted the same filters from the Query in the Multiprovider and able to see the data in the backend, however not data can be seen in the Report.
3. Three Hierarchies are restricted in the Filters of the Query.
It would be great, if any of you can help us to fix the issue.
Best Regards,
Sudhakar

Hi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks

Unable to see Data on Dashboard after running ETL Load in DAC(BI Anylitics)

Hi All,
I have Installed and Configured BI Anylytics and my ETL Load is running Sucessfull. But when I open the Dashboard
I am Unable to see the Data. We are configuring Out-of-Box. Can any one please help me.
Thanks in Advance,
Prashanth

Vinay,
I did not change anything.I just run the ETL and can see Payables Dashboard.and unable to undestand why I am not able to see General Ledger and Profitibality Dashboards
Regards,
Prashanth
Edited by: user10719430 on Feb 26, 2009 11:30 AM

XML Publisher Issue, Unable to see Data-- Load XML Data Option.

Hi ,
Can any one help to solve this issue.
Iam using XML Publisher tool to develop Oracle reports.
while doing this iam unable to useXML Publisher.
We have,
XML Publisher 5.5 version,
My problem is iam unable to see " *Microsoft word-->Data-->Load XML Data* " after installation of xml publisher succesfully.
Every one in my team are working with the same versions.but in my machine iam unable to get this option.
Thanks-
Sowmya.

Hi Sairam,
Check the checkbox Convert database Null values to default and Convert other Null values to default under Edit -> Report Options and then refresh the report.
If this does not work you can contact SAP Support.
- Nrupal

OBIEE 10g - Unable to see data in the report view with grand total applied

Hi,
We're facing with a strange issue.
We're working on a report view.
We're able to see data when Grand total is not applied on the report. The moment Grand Total is applied, it's showing either an empty table with NULL values or "No Results" page.
Please help.
Thanks in advance.
-Rama

Hi Dpk,
Thanks for your reply.
I included it in the instanceconfig.xml, but the issue still exists.
Couple of Observations
#1 - We noticed this issue when we drill down to the level which has really sparse data.
It works fine when we look at the enterprise wide report.
#2 - Works fine with few dimensional attributes and facts on the report
When we add a fact that doesn't have any value at that level, the issue starts to appear.
Thanks in advance.
-Rama

Unable to see data in ST06.

Hi Gurus,
    I am facing an issue in my ECC system where in , i can't see data in ST06N -> Filesystems. All i can see is ZEROS.
    My SAPOSCOL is running.
   Can you guide how this can be resolved.
Thanks,
Sachin.

Hi,
Stop and restart the service again.Check the log files as per the below link and check if there is any error or any other useful information:
[http://help.sap.com/saphelp_nw04/helpdata/EN/c4/3a6c67505211d189550000e829fbbd/content.htm]
Regards,
Muralidhar

Unable to do data form export using FormDEfUtil.cmd

Hi all,
I'm not able to do the data form export using FormDEfUtil.cmd.
D:\hyperion\planning\bin\FormDEfUtil.cmd export <formname> localhost admin password <appname>
I get this below message when tried the above script in cmd prompt.
usage: HspFormDefUtil <import/export> <filename/formname/-all> <server> <username> <password> <application>.
Any help is appreciable.
Thanks!!
Rev

It works..but still i dint get the .xml file..when checked the log,it is updated as below,
hbrserver.log:
+2010-08-17 07:54:44,346 WARN main com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity+
FormDefUtil.log:
Single sign on validation failed.
there could be any prob in authentication.??
Thanks!!
Rev

Unable to open a view in edit mode

Hi All,
I have a Notes assignment block in the Account Overview page. It contains a text area and an EDIT button to modify the notes. Corresponding view and context node for this block are BP_DATA/NOTES and NOTES respectively. Notes context node is bound to Text context node of the component controller.
The issue is, when agent confirms an account, goes to Overview page and clicks on EDIT button of the Notes block, then, if the block already has some text, then it turns in to EDIT mode. But if Notes section is empty initially, then, on click of EDIT button will not make the view editable.
During debugging, I can see that if notes section is already filled with some text, then there is an entity in the collection wrapper of the NOTES context node(also in the component controller collection wrapper). But if notes section is initially empty, then collection wrapper is empty(both view and component controller context nodes).
My requirement is to make the notes section editable even if there is no text present in it initially. It will be very helpful if someone could give me suggestions on this issue.
Thanks and Regards,
Naren

Hi Nitish,
Thanks for your reply. Infact I only coded the event handler. In the first line, I am reading the entity from the collection wrapper of the context node. If it is bound, only then I can set it in EDIT mode.
ob_entity ?= me->typed_context->notes->collection_wrapper->get_current( ).
IF ob_entity IS BOUND.
Sets the view in EDIT mode
Now, ob_entity is null if there is initially no data in the notes section of the confirmed account. However, if notes is not empty, then, ob_entity is bound and I can set the view to edit mode. This is the issue.
Regards,
Naren

User In Planning unit Hierarchy unable to see data form in editable mode

Similar Messages

Maybe you are looking for