User Management - delete Domain

Hi,
I'm trying to delete a domain which I do not use any more.
In the adminui I get the following error:
Delete Domains
Status: The following domains could not be deleted.
regards
Johannes

Hi Guys I'll try to answer all your questions
i only want to know, where you press "add" and what you try to do.
When i right click on the control and go to "Security" then click on "Add" i have the message above
What is your application. Where do you want to create a domain?Can you elaborate?
I try to have several accesses to a VI: student, professor, administrator...So i thought of creating domains for security access of each control
Are using LabVIEW DSC?
Yes i am using DSC module...
I think you start with something like Tools >>> DSC >>> Security
What is the difference between Tools >>> DSC >>> Securitys and Tools>>>Decurity ?
Samer,

Similar Messages

Database Studio 7.9.08.09 - Could not access to user management; Deleting old settings and reinstallation did not bring a change -- database studio deinstallation cannot be performed anymore

Hi Community,
for a few months I have been struggling with a SAP Max DB database Studio issue and finally, I had to give up the idea of being able to fix this on my own. I am desperately seeking for help and I hope that you may be able to give me a hint, advice or even a solution.
This is what happened:
I used to run Windows 7 on 32bit. I also had Database Studio installed - which was running fine then.
After a harware upgrade, I am running now Windows 7 on a 64 bit System. All my files from my local disk (C:\) have been restored and copied onto my new system.
I reinstalled Database Studio Version 7.9.08.09 onto my new System. But on the first try to start the program I received the error that said "Could not Access to user Management.See Window -> Show View-> Event Log Viewer for more Details."
However the Event Log Viewer was empty.
After searching the web for a solution, I followed the advice given in this community and deinstalled Database Studio and deleted the C.\Users\MyAccount\sdb folder manually.
I reinstalled Database Studio and started it as Administrator.
However, the error is still appearing.
And, what makes it even worse is : now I am not able to uninstall Database Studio anymore.
When I run SAP MaxDB Installation Manager and select the instance of database Studio to be uninstallled I am receiving the error:
"ERR: Unhandled Exception: Can't call method: "GenPackageList" on an undefined value at SDB/Install/Gui/Dialogs/SelectInstance.pm line 328"
Any advice is highly appreciated.
Thanks,
Agnieszka

Hello Yashwanth,
thank you for your quick Response.
Yes, I downloaded and installed the 64 bit Version of dbstudio.
I downloaded and ran the following .exe file: maxdb-studio-win-64bit-x86_64-7_9_08_09.exe
I am running the following Java-Version:
Java Plug-in 1.6.0_45
Using JRE version 1.6.0_45-b06 Java HotSpot(TM) Client VM
I myself am not a SAP customer. However, the Company I am working for is a SAP customer.
Can you explain in Detail, how to create a ticket with SAP?
Thanks,
Agnieszka

Sap UM connector 9.1.2 trouble with "SAP User Management User Recon" task

Hello All,
i have a problem with Sap UM Connector version 9.1.2.
OIM version 11.1.1.5
Windows 2008 R2
Problem is:
Then accounts in Sap are created through direct provisioning feature of connector everything works ok (subsequent update or delete an account).
But if a user account is created in Sap using Sap GUI, scheduled task "SAP User Management User Recon" of connector doesn't create reconciliation event to link user.
Sometimes it does though, but for one user account created using Sap GUI in OIM created two reconciliation events, so corrsponding user in oim have two records for resource SAP.
In this reconciliation events, one have full set of attributes (Login, First Name, Last Name, E Mail, etc), another one - just these 3 attributes: IT Resource, User ID, Lock.
"SAP User Management Delete Recon" scheduled task works ok then user account has been deleted using Sap Gui.
How one can troubleshoot such behavior?
Can anyone advise please?

resolved the issue by updating sap um connector to version 9.1.2.5

Lookout 6.02 User Manager Non-Functional

When User Manager is launched from Lookout menu (6.02 Full Development Version), a "User Manager for Domains" window opens and an error dialog with the same title says "Could not find domain controller for this domain."

Hmm.. do you perchance have LabVIEW / DSC 8.0 installed on the same machine? I know LabVIEW / DSC 8.0 has added "domain" funtionality to the security stuff. It could also be the latest Logos.
-Khalid

Adding a domain user to the admin role within the local user management breaks all metro apps for all users!!

Hi,
I have posted this in another large thread under the "Windows 8 General" group but have not had any appropriate feedback from MS.
After hours of testing and working with other users I have managed to isolate a simple situation that breaks all metro ui applications within Windows 8 for all users on the machine. Here are my exact steps and notes.
Before continuing if you are running Avast then your solution may be to turn of the behaviour shield functionality as this also breaks metro apps. This is NOT the problem we are having!
I have performed 3 cleans installs after isolating the problem and am able to reproduce the issue every time using the same steps on two different machines.
First thing to say is that for us it has nothing to do with simply joining the domain, domain/group policies nor does it appear to have anything to do with the software we installed, the problem here is much more simple but the result is pretty terrible.
Here are my exact steps of what I did to reproduce our problem:
Complete format of HDD in preperation for a clean install
Clean install performed
Set up the machine initially with a local account
Test metro apps - all working fine
Open control panel from the desktop, click on System, change the system to join the domain, click reboot
Log into the system using my domain account
Test metro apps - all working fine
Here's were the problem starts. I need my domain account to have admin rights on the local machine so I can install programs without the IT men having to come over and enter their password every 5 mins.
I go to control panel via the desktop and click on User Accounts. From with here I then click on "Manage User Accounts". This requires the IT guys to enter their details to give me access to such functionality. This is fine
In the dialog box that opens I can only see the local user that was initially created during setup. The "Group" for this local account shows as "Administrators" - Image included below (important to note that metro apps are working at this point)
I click add and then add my domain account - also giving it administrator access
Sign off or reboot to ensure the new security is applied
Sign back in to the domain account
Test metro - ALL BROKEN
Sign out
Sign in as local account
Test Metro - NOW ALL BROKEN FOR THIS USER ALSO
So as soon as I add my domain account to the local user accounts and set it as admin it breaks all metro apps for all users. This is on a totally clean install with nothing at all installed other than the OS.
Annoyingly if I go back and change the domain account to a standard user or if I totally remove the domain account from the local account management system the problem does not go away for either user. basically it is now permanently broken. The only fix I
could fathom was a full re install and not giving the domain user admin access to the local machine.
Screen one - this is the local user accounts window AFTER joining the domain and logging in with my domain account (All metro apps working at this point)
Screen 2: User accounts AFTER joining the domain and AFTER adding domain account to local user management (METRO BROKEN)
I have isolated my machine from all group policies so nothing like that is affecting me. Users I have spoken to in different companies have policies that automatically add users to the local user management. This means that metro apps break as
soon as they join the domain which leads them to wrongly think it is group policies causing the error. Once they isolate themselves from this they can reproduce following my steps.
Thanks

Hi Juke,
Thank you for the response and apologies for the delay in getting back to you. My machine was running a long task so I couldn't try your suggested solution.
I had already tried running the registry merge suggested at the top of the thread to no avail. I had not tried deleting the OLE key totally so I did that and the problem still exists. I will post all the errors I see in event viewer below. For
your info, since posting my initial comment I have sent out my steps to 7 different people and we can all reproduce the problem. This comes to 10 different machines (3 of them mine then the other guys) in 3 different businesses / domains. We see the same errors
in event viewer.
Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
Under "Applications And Services Logs" --> "Microsoft" --> "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for the
Windows.Launch contract failed with error: The app didn't start."
If you require any further information just let me know and I will provide as much as I can.
Thanks

Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.

We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

Forcefully delete user's "Deleted Items" from Exchange 2010 Management shell ?

After migration from Exchange 2003 to 2010 my organization's some user can't delete items from their deleted items folder, it generate a error message so how can I forcefully delete user's deleted items from their "Deleted Items folder" from
Exchange 2010 Management shell ? Thanks
Babu

Hi Babu ,
Based on my knowledge i have given some suggestions please have a look in to it.
1.We cannot use the search-mailbox command specifically for any folder in the mailbox.But we can use it for a whole mailbox.Below is the command which will copy the entire contents of the mailbox to the target folder called as "backup" .
Search-Mailbox -Identity "problematic mailbox name" -TargetMailbox "test mailbox" -TargetFolder "backup" -LogLevel Full -deletecontent
Note : Before executing the above command , please execute the below.
New-ManagementRoleAssignment -Name "Import Export_Enterprise Support" -SecurityGroup "Enterprise Support" -Role "Mailbox Import Export"
Once the above command is executed then you need to add your admin account to the security group "Enterprise Support" and then use the Search-Mailbox command to copy the entire items to the target mailbox and also it will delete all the copied
items from the original mailbox.
2.Another one option is to use the MFCMAPI tool to force delete the items on the deleted items folder.
Most importantly before doing all the above , please share me the error message what your users are facing while deleting the items from deleted items folder.
Thanks & Regards S.Nithyanandham

How to manage deleted user from AD

I can see this question was posted several times , but I am wondering if somebody can tell me what is actually right process when user is deleted from AD or when user or when usrer’s properties get updated.
Here is the scenario:
All users are synchronized via AD connector to CMDB, and they can be seen in User View in SCSM (configuration item- users)
User A leaves the company. The our process is to disable uses’s account
and rename it by adding the date when user object was disabled . For example
(April 15<sup>th</sup>, 2015)user name
After the next sync in User View in SCSM I cannot see user object , neither old or with disabled properties.
The user object is also not in Deleted Items View in the Administration workplace.
If an analyst wants to create a new ticket , he can by mistake choose disabled user from the picker dialog.
It tells that user still exist in CMDB, but not sure why in that case it cannot be seen in
User View.
After one month user object will be deleted and from it will stay in hidden deleted container in OU for 3 months.
As per one article from Travis , run as account needs to have list object on that folder even I do n see that on any Microsoft document. Or at least I did not find it.
So basically I need to understand if per Microsoft design user object needs to be deleted from
CMDB after the user is deleted from AD or not? I think it should not. However, we have many contractors who
leaves and comes back.
I think when they come back in the picker dialog it will be listed same user several times in this case which can be a big issue.
I need to know what actually needs to be done by AD connector and what needs to be done manually in SCSM if necessary.

Hi,
We could prevent the disabled Active Directory user accounts are not imported into the SCSM CMDB through the Active Directory Connector. This can be achieved by the LDAP filters in SCSM 2012.
For a complete description of the steps mentioned above, check out this article:
Excluding disabled users from AD Connector
http://blog.dietergasser.com/2013/03/15/excluding-disabled-users-from-ad-connector/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Non root user can delete root files, bug?

We're having an odd permissions based problem on Solaris 10 u5 x86_64, (new install, fully patched as of 2 days ago) It means that non root users can delete root owned files, which is something I've never seen before, and I've been doing this for almost 10 years.
We're installing into an 80Gb container on VMware ESX server 3.0.1. The OS takes 20Gb (2 processors, 4Gb memory, 8Gb swap) most of the remaining 60Gb is being used as both file systems and raw devices under disksuite as soft partitions. It's one of the file systems, /apps (where we plan to install sybase) that is giving us "issues"
Essentially:
# more /etc/vfstab |grep apps
/dev/md/dsk/d0 /dev/md/rdsk/d0 /apps ufs 2 yes -
# newfs -v /dev/md/rdsk/d0
/dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
newfs: /dev/md/rdsk/d0 last mounted as /apps
newfs: construct a new file system /dev/md/rdsk/d0: (y/n)? y
mkfs -F ufs /dev/md/rdsk/d0 20971520 -1 -1 8192 1024 264 1 546 8192 t 0 -1 8 7 n
/dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
Warning: 4096 sector(s) in last cylinder unallocated
/dev/md/rdsk/d0: 20971520 sectors in 3414 cylinders of 48 tracks, 128 sectors
10240.0MB in 214 cyl groups (16 c/g, 48.00MB/g, 5824 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 98464, 196896, 295328, 393760, 492192, 590624, 689056, 787488, 885920,
20055584, 20154016, 20252448, 20350880, 20449312, 20547744, 20646176,
20744608, 20843040, 20941472
# mount /apps
# ls -al /apps
total 20
drwxr-xr-x 3 root root 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
# su - sybase
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
sol10% cd /apps
sol10% rm *
rm: lost+found is a directory
sol10% rm -rf *
rm: cannot read directory lost+found: Permission denied
sol10% ls -al
total 20
drwxr-xr-x 3 root root 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
sol10% exit
sol10% logout
# chgrp sybase /apps
# chmod g+w /apps
# ls -ald /apps
drwxrwxr-x 3 root sybase 512 Sep 10 12:31 /apps
# ls -al /apps
total 20
drwxrwxr-x 3 root sybase 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
# su - sybase
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
sol10% cd /apps
sol10% rm -rf *
sol10% ls -al
total 4
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
sol10% id
uid=***(sybase) gid=***(sybase)
sol10% exit
sol10% logout
# pwd
# ls -ald /apps
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 /apps
# ls -al /apps
total 4
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
It's a new "bare metal" (in as much as there is no metal) install. I created the sybase user from scratch by hand editing passwd, group and shadow, buy copying and pasting the data out of the NIS maps. All I've done besides the install & patch is setup networking manually, and created the metadb's and the soft partitions and the mount points & newfs'ed & mounted three of them . I then changed ownership of /apps to be sybase:sybase, and handed it to the database team for the sybase install. they came back and said "should we be able to do this?" as they habitually run rm rf * knowing they can't delete root owned files, only now they can... This is true even if I just chgrp the directory and give them group write permissions. They can still delete anything owned by root, even if it doesn't have group permissions just like the lost+found directory. No other "real" machine we have, x86 or SPARC does this, but we've never installed u5 before either.
As you can imagine losing the lost+found directory is a bit of a problem, however what's really worrying me is if they can do that, what happens when they run sybase as the sybase user? If it borks can they trash the OS and write/overwrite random files?
It's a VM, so in as much that's not a problem, but the reason it's a VM is somebody wants to send a VM to a client as a demo, and at present it's highly unstable IMO.
Does anyone have any idea where to start? My thoughts are that it may be a VMware issue, (though the hardware and the guest OS is supported) it could be a bug, because I've never seen that weird newfs error before, and then I found this:
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6622243
Or it could be me, and the fact that I'm hand configuring it, and u5 now requires I do it "properly" with useradd, etc. I'd like to test, but the guy wants it built, and wants it now, so I patched it up, and gave it back to the database team and told them to be careful.
I'd be interested in you opinions regardless.
The full spec of the "machine" is below, sol10 is not it's name for obvious reasons, and I've hashed out the ID & GIUD for similar reasons.
# uname -a
SunOS sol10 5.10 Generic_127128-11 i86pc i386 i86pc
# prtdiag
System Configuration: VMware, Inc. VMware Virtual Platform
BIOS Configuration: Phoenix Technologies LTD 6.00 09/06/2007
==== Processor Sockets ====================================
Version Location Tag
Pentium(R) Pro CPU socket #0
Pentium(R) Pro CPU socket #1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
DRAM in use 0 RAM slot #0 RAM slot #0
DRAM in use 0 RAM slot #1 RAM slot #1
DRAM in use 0 RAM slot #2 RAM slot #2
DRAM in use 0 RAM slot #3 RAM slot #3
==== On-Board Devices =====================================
VMware SVGA II
ES1371
==== Upgradeable Slots ====================================
ID Status Type Description
0 unknown ISA ISA Slot J8
0 unknown ISA ISA Slot J9
0 unknown ISA ISA Slot J10
1 in use PCI PCI Slot J11
2 in use PCI PCI Slot J12
3 in use PCI PCI Slot J13
4 available PCI PCI Slot J14
# dmesg
Wednesday, 10 September 2008 15:33:35 BST
Sep 10 10:17:44 sol10 busra: [ID 490441 kern.info] NOTICE: ndi_ra_free: bad free, dip ffffffff803807a8, resource type memory
Sep 10 10:17:44 sol10 busra: [ID 883242 kern.info] NOTICE: ndi_ra_free: freeing base 0xe0000, len 0x4000 overlaps with existing resource base 0x0, len 0xf4000000
Sep 10 10:17:44 sol10 rootnex: [ID 349649 kern.info] pci0 at root: space 0 offset 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] pci0 is /pci@0,0
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 Rev. 1 LSI, Inc. 1030 found.
Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci1000,30 (mpt) instance 0 vector 0x11 ioapic 0x2 intin 0x11 is bound to cpu 0
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 mpt0 Firmware version v0.0.0.0 (?)
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 mpt0: IOC Operational.
Sep 10 10:17:44 sol10 pci: [ID 370704 kern.info] PCI-device: pci1000,30@10, mpt0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mpt0 is /pci@0,0/pci1000,30@10
Sep 10 10:17:44 sol10 scsi: [ID 193665 kern.info] sd0 at mpt0: target 0 lun 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] sd0 is /pci@0,0/pci1000,30@10/sd@0,0
Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /pci@0,0/pci1000,30@10/sd@0,0 (sd0) online
Sep 10 10:17:44 sol10 unix: [ID 190185 kern.info] SMBIOS v2.31 loaded (1695 bytes)
Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /cpus (cpunex0) online
Sep 10 10:17:44 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dld0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: i8042 (i8042) instance 0 vector 0x1 ioapic 0x2 intin 0x1 is bound to cpu 1
Sep 10 10:17:44 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: i8042 (i8042) instance #0 vector 0xc ioapic 0x2 intin 0xc is bound to cpu 1
Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: keyboard@0, kb8042 # 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] kb80420 is /isa/i8042@1,60/keyboard@0
Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: mouse@1, mouse8042 # 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mouse80420 is /isa/i8042@1,60/mouse@1
Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
Sep 10 10:17:47 sol10 unix: [ID 557827 kern.info] cpu1 initialization complete - online
Sep 10 10:17:47 sol10 rootnex: [ID 349649 kern.info] iscsi0 at root
Sep 10 10:17:47 sol10 genunix: [ID 936769 kern.info] iscsi0 is /iscsi
Sep 10 10:17:52 sol10 genunix: [ID 454863 kern.info] dump on /dev/dsk/c1t0d0s1 size 8197 MB
Sep 10 10:17:53 sol10 pci: [ID 370704 kern.info] PCI-device: pci8086,7191@1, pci_pci0
Sep 10 10:17:53 sol10 genunix: [ID 936769 kern.info] pci_pci0 is /pci@0,0/pci8086,7191@1
Sep 10 10:17:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Sep 10 10:17:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Sep 10 10:17:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
Sep 10 10:17:54 sol10 pseudo: [ID 129642 kern.info] pseudo-device: zfs0
Sep 10 10:17:54 sol10 genunix: [ID 936769 kern.info] zfs0 is /pseudo/zfs@0
Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: power0
Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] power0 is /pseudo/power@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Sep 10 10:17:56 sol10 rootnex: [ID 349649 kern.info] xsvc0 at root
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] xsvc0 is /xsvc
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pseudo1
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] pseudo1 is /pseudo/zconsnex@1
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Sep 10 10:17:56 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 1
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 0
Sep 10 10:17:56 sol10 genunix: [ID 640982 kern.info] ATAPI device at targ 0, lun 0 lastlun 0x0
Sep 10 10:17:56 sol10 genunix: [ID 846691 kern.info] model VMware Virtual IDE CDROM Drive
Sep 10 10:17:56 sol10 genunix: [ID 479077 kern.info] ATA/ATAPI-4 supported, majver 0x1e minver 0x17
Sep 10 10:17:56 sol10 pci: [ID 370704 kern.info] PCI-device: ide@0, ata0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ata0 is /pci@0,0/pci-ide@7,1/ide@0
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 scsi: [ID 193665 kern.info] sd1 at ata0: target 0 lun 0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] sd1 is /pci@0,0/pci-ide@7,1/ide@0/sd@0,0
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: fdc (fdc) instance 0 vector 0x6 ioapic 0x2 intin 0x6 is bound to cpu 1
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: fdc0
Sep 10 10:17:56 sol10 fdc: [ID 114370 kern.info] fd0 at fdc0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] fd0 is /isa/fdc@1,3f0/fd@0,0
Sep 10 10:17:56 sol10 genunix: [ID 314293 kern.info] device pciclass,030000@f(display#0) keeps up device sd@0,0(sd#1), but the latter is not power managed
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dtrace0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] dtrace0 is /pseudo/dtrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fasttrap0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fasttrap0 is /pseudo/fasttrap@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: vol0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pool0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] pool0 is /pseudo/pool@0
Sep 10 10:17:57 sol10 ipf: [ID 774698 kern.info] IP Filter: v4.1.9, running.
Sep 10 10:18:05 sol10 nfs4cbd[395]: [ID 867284 daemon.notice] nfsv4 cannot determine local hostname binding for transport tcp - delegations will not be available on this transport
Sep 10 10:18:10 sol10 sendmail[598]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
Sep 10 10:18:10 sol10 sendmail[600]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
Sep 10 10:18:17 sol10 mac: [ID 736570 kern.info] NOTICE: e1000g0 unregistered
Sep 10 10:19:10 sol10 sendmail[598]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Sep 10 10:19:10 sol10 sendmail[600]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Sep 10 10:20:10 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Sep 10 10:20:10 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Sep 10 10:24:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Sep 10 10:24:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Sep 10 10:24:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
Sep 10 10:24:59 sol10 e1000g: [ID 801725 kern.info] NOTICE: pci8086,100f - e1000g[0] : Adapter 1000Mbps full duplex copper link is up.
Sep 10 10:28:21 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Sep 10 10:35:17 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 11:28:55 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 12:28:56 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 13:29:01 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 14:29:10 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 15:29:38 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
# prtconf
System Configuration: Sun Microsystems i86pc
Memory size: 4132 Megabytes
System Peripherals (Software Nodes):
i86pc
scsi_vhci, instance #0
isa, instance #0
i8042, instance #0
keyboard, instance #0
mouse, instance #0
lp, instance #0
asy, instance #0
asy, instance #1
fdc, instance #0
fd, instance #0
pci, instance #0
pci15ad,1976 (driver not attached)
pci8086,7191, instance #0
pci15ad,1976 (driver not attached)
pci-ide, instance #0
ide, instance #0
sd, instance #1
ide (driver not attached)
pci15ad,1976 (driver not attached)
display, instance #0
pci1000,30, instance #0
sd, instance #0
pci15ad,750, instance #0
iscsi, instance #0
pseudo, instance #0
options, instance #0
agpgart, instance #0
xsvc, instance #0
objmgr, instance #0
acpi (driver not attached)
used-resources (driver not attached)
cpus, instance #0
cpu (driver not attached)
cpu (driver not attached)
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 10440 alt 2 hd 255 sec 63>
/pci@0,0/pci1000,30@10/sd@0,0
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c1t0d0s0 is currently mounted on /. Please see umount(1M).
/dev/dsk/c1t0d0s1 is currently used by swap. Please see swap(1M).
/dev/dsk/c1t0d0s3 is currently mounted on /usr. Please see umount(1M).
/dev/dsk/c1t0d0s4 is currently mounted on /var. Please see umount(1M).
/dev/dsk/c1t0d0s5 is currently mounted on /opt. Please see umount(1M).
/dev/dsk/c1t0d0s6 is part of SVM volume sp:d8. Please see metaclear(1M).
/dev/dsk/c1t0d0s7 contains an SVM mdb. Please see metadb(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> p
Current partition table (original):
Total disk cylinders available: 10440 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 1 - 131 1.00GB (131/0/0) 2104515
1 swap wu 132 - 1176 8.01GB (1045/0/0) 16787925
2 backup wm 0 - 10439 79.97GB (10440/0/0) 167718600
3 usr wm 1177 - 1829 5.00GB (653/0/0) 10490445
4 var wm 1830 - 2091 2.01GB (262/0/0) 4209030
5 unassigned wm 2092 - 2614 4.01GB (523/0/0) 8401995
6 unassigned wm 2617 - 10439 59.93GB (7823/0/0) 125676495
7 unassigned wm 2615 - 2616 15.69MB (2/0/0) 32130
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0
partition> quit
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> q
# metastat -p
d8 -p c1t0d0s6 -o 109973513 -b 61440
d7 -p c1t0d0s6 -o 109461512 -b 512000
d6 -p c1t0d0s6 -o 109051911 -b 409600
d5 -p c1t0d0s6 -o 88080390 -b 20971520
d4 -p c1t0d0s6 -o 67108869 -b 20971520
d3 -p c1t0d0s6 -o 46137348 -b 20971520
d2 -p c1t0d0s6 -o 41943043 -b 4194304
d1 -p c1t0d0s6 -o 20971522 -b 20971520
d0 -p c1t0d0s6 -o 1 -b 20971520

An easy way to think of it is this -- everything in Unix is a file. Including directories; they are just a file which contains a list of the files in that directory, and pointers to them.
If the 'sybase' user has write permission on the directory, they have permission to edit that "list", and can add or remove files to the list. It doesn't matter who the files on the list belong to, because the files are not what is being modified. Only the list of files is being modified. (Of course, in Unix, if you erase the file's listing from all of the lists it's on, the file itself goes away for housekeeping purposes.)
One thing that would have stopped the 'sybase' user from removing the lost+found directory is if that directory itself had files in it -- without write permission to the lost+found directory, that user could not have removed those files, and since one cannot remove a non-empty directory, that operation would have failed. Since lost+found was empty in this case, it could be removed simply by having permission to write to the /apps directory.
This behavior does change if you set the sticky bit on the directory -- in that case, files may only be removed by the owner of the file or directory, or if the user has write permission to the file. This would have prevented the sybase user from removing the lost+found directory. (Note, this also applies to the 'rename' function call.) This would probably be the best way to handle your situation, since you apparently do want the sybase user to be able to add files to /apps, but do not want them to be able to remove lost+found.
Edited by: MadBishop on Sep 12, 2008 7:46 AM

Third-Party User Management Tools

I'm looking for recommendations for third-party user management tools that can do the following:
- Identify and bulk-expire/no visibility users that are inactive for >XXX days
- Identify users with auto-forward rules
- Bulk-delete inactive accounts (from GW database only, not eDirectory accounts)
- Maybe even bulk-move inactive/expired accounts to a "dead accounts" post office?
I have an immediate mandate to clean up our environment, and I don't see how to do this in bulk with existing native tools. It's just one guy (me) versus 42 post offices and 23,000 user accounts...
Thanks!

You can create your own tools using the GroupWise Administrative Object API and the GroupWise Object API.
Please refer to the Cool Solutions article I wrote ( shameless self promotion ) "Scripting GroupWise" - Scripting GroupWise | Novell User Communities for more information on the GroupWise Admin API. I suggest that you modify the script listUser.vbs to include domain name ( GWUser.PostOffice.Domain.Name ) , post office name ( GWUser.PostOffice.Name ), visibility ( GWUser.Visibility ) and last login date ( GWUser.MailboxLastLoginDate). You will need to run an audit report on each post office to update the MailboxLastLoginDate property. Import the output into Excel and sort / filter accordingly for analysis.
Setting an expiration date ( MailboxExpDate ) and / or visibility ( Visibility ) is done by assigning values to the respective properties and using the commit method - e.g GWUser.Commit
Identifying accounts with auto-forward rules can be using GroupWise Object to log into each account using a trusted application key. I posted ( more shameless self promotion ) some sample code to list proxy access in another thread - https://forums.novell.com/novell-pro....html#poststop. It is not too difficult to modify the code to iterate through rules and select those that include the action forward.
Deleting is be done using the the delete method - e.g. GWuser.Delete(eadGW) where eadGW is constant with the value 1.
I would advise against using the Administrative Object API to automate moving accounts. Best practices to avoid problems during moves involve running GWCheck against user objects until there are no errors. I perform structure, contents, contents with attclip and contents with deldupfolders checks until there are no error before moving accounts. There is also the issue of how many simultaneous moves the post office agents can handle. More accurately it is the number of simultaneous purges on the source post office that need to be monitored.
If you need more help with coding let me know.
Sincerely,
Bryan Vandenberg
Originally Posted by gregamy
I'm looking for recommendations for third-party user management tools that can do the following:
- Identify and bulk-expire/no visibility users that are inactive for >XXX days
- Identify users with auto-forward rules
- Bulk-delete inactive accounts (from GW database only, not eDirectory accounts)
- Maybe even bulk-move inactive/expired accounts to a "dead accounts" post office?
I have an immediate mandate to clean up our environment, and I don't see how to do this in bulk with existing native tools. It's just one guy (me) versus 42 post offices and 23,000 user accounts...
Thanks!

Problem deleting Domains

Cannot deleting domains.
Error encountered
stderr Aug 10 08:15:23 deleteObjects: java.lang.NullPointerException
stderr Aug 10 08:15:23 deleteObjects: at com.sun.symon.base.console.manager.CmObjectDelete.run(CmObjectDelete.java:207)
stderr Aug 10 08:15:23 deleteObjects: at java.lang.Thread.run(Unknown Source)

SeaBiscuit13 wrote:
Thanks!
I also did not notice that the Genieo app is in the upper right header bar, it kept saying it was open and I could not figure out how to close it.
I take it you discovered this by reading Thomas' article on manually removing Genieo. Glad you were able to get through that.
Apparently that Ad Ware removal you have to upgrade to the latest version of OS, which I haven't done because some of my software is not compatible with the upgrades. So if anyone knows of a Adware that still runs on 10.6.8 let me know.
I just finished rebooting into a 10.6.8 system I keep around for testing and was able to run the Adware Removal Tool just fine. It's a pretty simple AppleScript which should be compatible with any Intel Mac. I'm know for a fact that other 10.6.8 users have been able to run it. What type of error message did you receive?

User management in Labview

Oh wow...you learn something new every day - I can't say I knew that the 'NI Security' existed! Looks like there are some VI Server methods for logging in/out and getting access rights which is pretty cool and does quite a lot of the legwork for you. I'm not sure how widely used it is though?
As for resetting the password - you might need to take it up with NI to see if they can tell you if/how it is possible to reset the password and/or delete the file/database which stores the information.
Perhaps you could create a new NI Domain for your needs?

Is there any good solution for user management in labview?
I want to define 3 access level for my program. Level 1 is admin, he can create new users, assign access to indivual controls for that user, he can create configurations and select configuration for a device that is communicated over UDP/IP, Level 2 is user, he can select config, is not allowed to change or create configs, level 3 is observer, he can only observe the system state, he is not allowed to change any configs nor select configs.
I have searched a little in internet, What I found was an "official" solution, that has schocked me. It is using "hard-coded" passwords in Programmcode. It is absolutely NO-GO for my application. All users must be able to change his/her password.
As an alternative I can use windows users/groups as user logins. I have found below topic but it is not working. I get error 1172 always.
https://lavag.org/topic/15260-labview-and-windows-authentication/
BTW: I need local users, not domain users, in case windows authentication.
What is the best solution?
Thanks.

BPC user management

I'm looking for a way to automatically add users to BPC and assign them the appropriate permissions. I plan on using an Identity Management system to create the account but can't figure out how to integrate with BPC. For example, in ABAP systems we can create the account and assign it groups; in the Portal we can add the account to Active Directory groups and assign permissions to the Active Directory group in the Portal. Is there anything like this for BPC? Any exposed webservices?
Thanks,
Chris

HI Chris,
If you want to automate the users and it's permisess you will have to have a bvast knowledge about the bpc tables that manage the users, there's the UJE_USER table that has the complete information of the user. There you can configure the user and the domains where they are avaliable, i think you will have to make an abap program for that kind of rutine. here in this document you can fin a little bit more of the bpc system tables /people/sheldon.edelstein/blog/2010/01/20/sap-businessobjects-planning-and-consolidation-version-for-netweaver--deleting-an-appset, I really don't know if there is a way to communicate directly to the active directory using a web service.
hope it helps,

How to give full access to mailbox to users in trusted domain?

Hi,
I am working on a migration-project where we migrate all users from one domain to a new domain. I have Exchange in both domains, and migrates mailoboxes from the old to the new domain. In the old domain I have a number of mailboxes that are used for common
calendars for the departments. My problem is: How can I give the users who has been migrated to the new domain full access to the existing calendar-mailboxex in the old domain? I have given the accounts in the new domain full access to the mailboxes
in the old domain by using to following command: get-mailbox mailboxname | add-mailboxpermission -accessrights FullAccess,ExternalAccount -user newdomain\username
After the command has completed I can see the account listed in the "Manage Full Access Permission"-dialog, but still the new useraccount cannot create appointments etc in the original calendar from Outlook.
Any tips on this?
Thor-Egil

Hi Thor,
Thank you for your question.
Did the issue occur when we use OWA?
Are there any errors when they cannot create appointments?
We could enable “Support cross forest delegation” on FIM(Forefront Identity Manager) to check if the issue persist.
There is an article for us to how to enable “Support cross forest delegation” by the following link:
http://blogs.technet.com/b/neiljohn/archive/2011/10/12/exchange-server-2010-cross-forest-delegation.aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Office 2013 will not open unless user is a Domain Admin

In order to get the Office 2013 suite to install from Office 365, I had to make all the users (115 in 4 offices) a domain admin, we then installed the software on everyone's computers and we have migrated our email. However, I now need
to remove all the users from being a domain admin, but when I do none of Office programs will open, no error message, just a spinning wheel for 10 seconds and nothing. I need to remove the users from being a domain admin as they can now see
network drives that they were previously restricted from. All computers are Windows 7 Pro. I have even installed the suite on a brand new computer, installed as admin, login as a domain user and nothing will open.
Thanks

What's the default right for the user in your domain, domain user?
Can we open the Office application when the domain user is in local administrator group?
Please turn off all of security programs and 3rd-party programs (Windows clean boot) and then launch Office component, such as Word.exe with safe mode. ("Winword.exe /safe") to check if it opens successful in non-domain user rights.
Don't use Office shortcut to open Office but double click the .exe file under %programfiles%\Microsoft Office to check if the office process appears in Windows Task Manager.
In addition, please go to eventvwr to check if there is any errors regarding to permission or Office exist. If so, post it here for further checking. Thanks.
Tony Chen
TechNet Community Support

User Management - delete Domain

Similar Messages

Maybe you are looking for