User name sorting

How do I get user's names to sort by Last name, First name
not first name, lastname. Also when in a meeting the name are
posted this way as well. my user are military and need to look like
this in a meeting:
LTC Smith, John G5 OPS

Any idea? I supposed that it should be sorted by displayname atribute (i.e. <lastname><space><firstname>). Do you think it is good presumption?
Zbynek

Similar Messages

  • Time Capsule won't accept my user name and password for access - Help!

    Hi all,
    My Time Capsule seemed to stop working one day and I had to do a hard reset with the little button at the back. After that it worked and I restored my wireless network settings but now I can't access the Time Capsules hard drive with Time Machine.
    When I try to choose it as my Backup Disk in the Time Machine preferences it says "Enter your user name and password so Time Machine can access the file server "Our Time Capsule" (the name of my time capsule). However, every time I try to enter my password I get "Sorry, you entered an invalid username or password".
    I've already tried several resets of the Time Capsule and I've also tried logging on my computer as the Root user and changing my administrator account password back and forth but no go.
    Help! and Thanks.

    Norman & Harry,
    Consider the following:
    *_Time Capsule Keeps Asking Me For a Password_*
    It will be important to know what is going on, or what you are doing when it asks for the password. Is it asking for a password only when Time Machine attempts a backup? Consider this:
    It is NOT your username and password it wants when you try accessing the Time Capsule. (I know... it SAYS "username and password") But it means the Time Capsule's Name and Password.
    You will find that by launching Airport Utility.
    Select the TC on the left.
    Click "Manual Setup".
    Click the "Time Capsule" Tab.
    You will see "Time Capsule Name:" and "Time Capsule Password".
    Make sure “Remember password in keychain" is checked.
    That is the information you need to enter when it asks for "username & password."
    *I Don’t Remember What My Time Capsule Password Is*
    You can see what your current TC password is by going into Keychain.
    Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left.
    Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
    To see what passwords are being stored, double-click your Time Capsules' entry. A new window will appear.
    Put a check beside "Show Password". You may be asked for your own Admin password so enter that.
    Now the Password field will display the password you entered into Airport Utility for your Time Capsule
    *It Still Won’t Accept the TC Name and Password*
    Launch Airport Utility --> Manual Setup.
    Select "Disks" in the tool bar above.
    Click the "File Sharing" tab.
    Is "File Sharing" checked? It should be.
    What is selected beside "Secure Shared Disks"? If it says "With Accounts" or "With a Disk Password" then the system will ask you for a password every time it mounts the TC hard disk. If you switch it to "With Time Capsule Password" then use the password you designated earlier in the “Time Capsule" tab. It should only ask you once and then never again - because you had checked "Remember password in keychain".
    If you have made any changes then click "Update".
    Let us know if this resolves your issue.
    Cheers!

  • HT204053 How do my husband and I make our own passwords and user names? We are Shari

    My husband and I have the same user names and password for our iPads 4and iPhones. When one of downloads onto a device, it goes to both devices. Also, he gets my reminders. I want to keep the user name and password and he will then get his ow ones. How do we go about doing this?
    When I looked into doing this on apple site, it seemed to show that I can change them, but not just change one of them

    He should go to http://appleid.apple.com and create a new ID - it's best to have a non-Apple address to do this with but it must be one that hasn't been previously associateds with an Apple ID. A free one from GMail or Yahoo would do.
    He should then sign out in System Preferences>iCloud, whereupon all the contact, calendar and Mail data from your iCloud account will disappear. He can then sign in with the new ID and create a separate account. He can share some of your data if he wants to by signing in with your account in System Preferences>Mail, Contacts and Calendars and checking just that sort of data there.
    None of this affect iTunes Store purchases. He will need to sign out in the iTunes Store (click the name at left of the black toolbar and choose 'Sign out' and then sign in with his new ID. However if he has made app purchases on your ID he will not be able to update them, or view films: you can't move purchases from one account to another and you can't keep changing the sign-in to the Store either. It's quite possible for him to retain your ID in iTunes but have his own in iCloud as the two are not connected.

  • RE: (forte-users) user name

    Troy Burns wrote:
    It would definitely be of interest to me, since this is an item on my
    "to-do" list. If you can release the code, let me know.Here 'tiz.
    The files you're getting are:
    SFVosC.pex - "C" wrapper.
    Vos.C - The "C" callout.
    Vos.H - A header file for Vos.C, used by ...
    VosCLI.C - A command-line-driven mainline to test Vos.C
    VosObj.CEX - An object that provides a "nice" interface to the "C" wrapper.
    We use this in two ways: instantiated as a local object to get the username
    under VMS or NT, or as a service object partitioned to an NT server to do
    username/password authentication on behalf of clients on other operating
    systems.
    The following changes have been made throughout the files in an attempt to
    keep various people in DuPont happy:
    "our_application_root" replaces the actual name of the root directory of
    the application.
    "our_vms_server" replaces the actual name of the system in question.
    "our_nt_server" replaces the actual name of the system in question.
    "our_application_name" replaces the actual name of the application.
    A copyright notice, the usual disclaimer, and a "fair use" statement (which
    is just a reference to the Perl Artistic License) have been inserted.
    Except for the "ExternalObjectFiles" declaration in SFVosC.pex, all the
    changes appear to have been in comments. But the files come with the usual
    freeware warranty (i.e. "use at your own risk".)
    Have fun with these!
    Tom Wyant
    (See attached file: SFvosC.pex)(See attached file: Vos.c)(See attached
    file: Vos.h)(See attached file: Voscli.c)(See attached file: VosObj.cex)

    I would try going to the "lowest common denominator" between WindowsNT and
    Windows95 - DOS. Both windowing OS's sort of have their roots in DOS, or at
    least both are capable of opening a DOS session.
    Therefore, from a DOS prompt type "set" to view the environment variables for
    both OS types. Look for a common variable between the two that stores the
    userID. If you can find one of these your application will be that much more
    portable between these two Windows mutations.
    I used "set" on my NT and found my userID assigned to a few variables. I haven't
    done this on a Windows95 machine in quite some time, but if the machine is on
    the network it should have at least one environment variable with the userID.
    I'm just guessing that DOS has a variable to store the userID that will be
    common to both machines.
    Good luck....
    Kelsey PetrychynSaskTel Technical Analyst
    ITM - Technology Solutions - Distributed Computing
    Tel (306) 777 - 4906, Fax (306) 359 - 0857
    Internet:kelsey.petrychynSasktel.sk.ca
    Quality is not job 1. It is the only job!
    "Olivier Andrieux" <oandrieuxaxialog.fr> on 07/19/2000 09:12:41 AM
    To: forte-userslists.xpedior.com
    cc: (bcc: Kelsey Petrychyn/SaskTel/CA)
    Subject: (forte-users) user name
    Hi
    I use this command to catch the username:
    task.part.operatingsystem.getenv('username')
    with NT, there is no problem
    but with windows95 or 98 the command doesn't find the username.
    Thanks in advance.
    Olivier Andrieux
    Axialog
    Lille
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

  • How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

    How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

    Ok what about If i need to get all important attributes by comparing Email addresses from excel file and get all required answers
    currently I am trying to verify how many users Lines are missing , Emp numbers , Phones  from AD with HR list available to me.
    I am trying to Scan all the AD matching HR Excel sheet and want to search quickly how many accounts are active , Line Managers names , Phone numbers , locations , title , AD ID .
    these are fields I am interested to get in output file after scanning Excel file and geting reply from AD in another Excel or CSV file
    Name’tAccountName’tDescri ption’tEma I IAddress’tLastLogonoate’tManager’tTitle’tDepartmenttComp
    any’twhenCreatedtAcctEnabled’tGroups
    Name,SamAccountName,Description,EmailAddress,LastLogonDate,Manager,Title,Department,Company,whenCreated,Enabled,MemberOf | Sort-Object -Property Name
    Can you modify this script to help me out :)
    Hi,
    Depending on what attributes you want.
    Import-Module ActiveDirectory
    #From a txt file
    $USERS = Get-Content C:\Temp\USER-LIST.txt
    $USERS|Foreach{Get-ADUser $_ -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
    #or from a csv file
    $USERS = Import-CSV C:\Temp\USER-LIST.csv
    $USERS|Foreach{Get-ADUser $_.SAMAccountName -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
    Regards,
    Dear
    Gautam Ji<abbr class="affil"></abbr>
    Thanks for replying I tried both but it did not work for me instead this command which i extended generated nice results
    Get-ADUser -Filter * -Property * | Select-Object Name,Created,createTimeStamp,DistinguishedName,DisplayName,
    EmployeeID,EmployeeNumber,Enabled,HomeDirectory,LastBadPasswordAttempt,LastLogonDate,LogonWorkstations,City,Manager,MemberOf,MobilePhone,PasswordLastSet,BadLogonCount,pwdLastSet,SamAccountName,UserPrincipalName,whenCreated,whenChanged
    | Export-CSV Allusers.csv -NoTypeInformation -Encoding UTF8
    only one problem is that Manager column is generating this outcome rather showing exact name of the line Manager .
    CN=Mr XYZ ,OU=Users,OU=IT,OU=Departments,OU=Company ,DC=organization,DC=com,DC=tk

  • User name and password required to access Security settings

    I have an HP5520e all in one printer. I am trying to set it to scan to my computer. The instructions say I should activate Webscan from the Administrator Options under Settings and Security. When I try to get to Administrator settings I am being asked for a user name and password. What username and password am I supposed to enter here?
    This question was solved.
    View Solution.

    gnomad899,
    Welcome to the HP Forum.
    Start with the standard:
    admin = admin
    password = password  (or leave it blank)
    This assumes, of course, you have not used EWS (embedded web server) and set a password for it previously -- which you CAN do while using EWS.  Once you do set a password using the EWS page, everytime you want to look at certain settings, adjust certain settings, you have to enter the password you set up.
    EWS is simply the web page interface to the printer -- like you use a web page to talk to your router software.  Same thing - sort of, except you type in the printer IP on your browser instead of the router, of course.
    ============================================================================
    If it won't let you in,
    You can try resetting the printer.   Be Aware that should you do this, you have to re enter any previously entered information (wireless settings, etc.).
    You might be able to reset the printer on the front panel  - settings > factory defaults (or similar).
    OR
    from TroubleShooting > Solve a Problem > Printer Does Not Maintain Wireless Connection
    Step four: Reset the printer and wireless router, and then restart the computerFollow these steps to reset your printer and your wireless router, and then restart your computer.
    NOTE:Consider bookmarking this page on your web browser so that you can reference it after restarting the computer.
    Follow these steps to reset your printer, your wireless router, and your computer.
    Press the Power button on the printer to turn it off.
    Disconnect the power cord from the rear of the printer.
    Disconnect the power cord from the wireless router.
    Turn off the computer.
    Wait 30 seconds.
    Reconnect the power cord to the wireless router.
    Wait 30 seconds, or until the router is fully on and ready.
    Turn the computer back on.
    Wait for the computer to reload.
    Reconnect the power cord to the rear of the printer.
    Turn the printer back on.
    ===========================================================================
    Reference:
    HP 5520 e All in One Printer
    User Guide
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • How do I change the name of my "User" name?

    I bought a used Macbook Pro. I hate my Home User name and can't figure out how to change it. Let me explain. When looking at the finder window at the botom it gives a path "Macintosh HD > Users > Abc123".
    How can I change "Abc123" to a name I like?
    Using Leopard 10.5.8

    I tried it and it sort of worked but didn't do what I needed. I am trying to change the name of the home folder but keep all its settings, desktop, etc. When I used the Advanced area and changed the path name and did a restart it gave me a fresh desktop like a new computer. All my settings were wrong, etc. I guess it did the same thing as if I had created a new account name but what I want to do is just change the path name. I guess if I do that it would screw up all my file paths since they probably would not automatically update to the new path name, huh?

  • Invalid user name and password when adding a shared printer from vista

    I have the following hardware in our house:
    1. A Vista Ultimate
    2. A Power Book G4
    3. A Netgear RangeMax router
    4. A Canon IP2200
    The printer is attached to the vista PC by USB.
    That PC is attached by ehternet to the router.
    The mac is networked to the router by wireless.
    Our wireless network is secured by WPA-PSK.
    I have set up file and printer sharing on my vista PC and on the mac.
    File sharing is working perfectly and can connect to my PC using the windows file sharing protocol (SMB).
    I then decided to add my printer as a shared device. I set the printer to shared using my vista PC.
    On the mac I opened:
    System Preferences > print & faxes > Set Up Printers > add.
    I selcted Windows Printing and then Workgroup (my vista PC is on this workgroup)
    and then clicked my PC and then Choose.
    I then get asked for my Windows Username and Passowrd.
    After typing this in I get the follwoing message.
    "Unable to connect to server with the provided password and user name.
    Error: 256"
    I know that my username and password are correct as I add the same printer to my friends XP laptop.
    Is this a vista or mac issue or both. I really don't want to have to unplug my printer or copy the file to my PC everytime I want to print something.
    I have not tried to add the printer to the mac from a XP compluter and maybe something I need to try.
    Sorry for the long post but I really want to sort out this problem.
    P.S I have googled for this problem and have come across a mac help forum with the exact smae problem. However no one has a solution.
    I hope I can find a solution for me and others having this problem.
    Power Book G4   Mac OS X (10.3.9)  

    I don't have Vista...
    I wonder if this will help:
    http://chris.pirillo.com/2007/03/07/file-sharing-from-windows-vista-to-os-x/

  • Invalid user name or password

    Happy New Year, everyone!
    I hope 2009 will be the year in which my computer problem is solved. It goes back to when I originally installed 10.5 in October 2007.
    I am the administrator. My daughter is logged in as another user. When I need to restart the computer, I have to enter my user name and password. It is not accepted. The only way to get around this is to log in as my daughter, then log her out. In some cases, I have even had to log myself out too, before I can restart!
    I took my computer to the Apple Store. I had to leave the computer at the Genius Bar for an hour for them to fix the problem. I don't know how they fixed it. In any case, the problem has returned, and the Genius Bar is some distance from my home.
    I have posted this problem before, and tried various suggestions. None of them worked, including creating a dummy administrator account, and also going in to Keychain First Aid, and repairing both my password and my daughter's password.
    It is possible that someday I will make it back to the Apple Store to have the problem fixed again, but I would appreciate some suggestions, to help me understand exactly what is wrong here. I know others are having this problem too.
    Thanks for your help! Happy 2009 to all!
    Cameron MacDonald

    If you have your "Leopard" DVD (could be a grey "restore" DVD that came with your computer), you can boot off of it by restarting with the disc in the drive and holding the "C" key down. When the OS X installer loads, select a language and then do not advance any further. Go to the "Utilities" menu and select "Reset Password", and follow the instructions to reset the password for your administrator account on the system. This should get things up and running again.
    The overlying problem sounds like a directory corruption that will continuously knock out your authentication credentials. When you're logged in as your daughter's account, can you go to the system preferences and authenticate (by clicking the lock in one of the system preferences) as your own admin account? If not, then that signifies a directory corruption of sorts. The keychains have nothing to do with the directory and authentication system. All they do is use those credentials to store multiple passwords in one location for easy access, and are accessible AFTER you've authenticated at login.

  • Initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
    Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
    Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
    Open cmd prompt and type "cd c:\temp".
    Launch the browser and open the PDF.
    Open task manager, sort processed by name. Two AcroRd32.exe instances  should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
    On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
    Perform your steps to cause the crash.
    Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
    Thanks in advance for all your help
    Ankit

  • Incorrect user name or password Again !!!!!

    I can connect to my email through windows live mail on my desktop but once again every hour or so for the last 3 days on my android tablet or phone I keep getting "incorrect user name or password" on 3 different email addresses.   I fill in the box with my password and off we go for about an hour then the same happens. I can log in to bt yahoo mail on the web with no problem when this happens but not with the email client installed on my tablet or phone. This happened about a month ago for a week then stopped and I had several episodes last year. Can someone tell me what's going I haven't changed any setting or anything and now I am gettig sick to death of it !!!!
    Spoiler (Highlight to read)

    If you could access your email via webmail on a browser the "idiot"should have told you there was nothing wrong. All BT agree to provide is email via webmail. They provide the settings to allow you to use email clients or apps but they do not support this method of accessing your email. This is in line will all other ISPs. There are far to many email clients and variables over which they have no control for them to be able to provide solutions for every email client on the market.
    As you have found, usually when the problem you starts and provided you can still access it via webmail, the best thing to do is leave it alone and it usaually sorts itself out in a day or so.

  • User-name p[roblem

    Here's a non-Premiere question:  Adobe told me to change my password for some unknown reason. To do so I had to give them my new email address so they could contact me. Then they gave me a new user name "hurrange" which I believe is someone elses user name. I phoned a helpline which charged me £22 to change the user name back to Tim flippance but with a lower-case f on the second word. Now I find that I cannot gain access to my past history because Adobe thinks I am a new user because the old stuff is under Tim Flippance.  Can anyone sort this out?  Thanks.

    I no longer have the email (it said that the included link had a 3 day expiration) but when I received the "we've been hacked, you need to change your password" email from Adobe, it had instructions to click the link in the email
    That link led to a page to enter a new password... which I did... and I have not had any problems since then
    You MAY have been one of the people who was hit by a scammer after Adobe was hacked and information was stolen... at least now you know that you should only go to an Adobe web site for Adobe help, not some other site that wants to charge you money
    If you paid by credit card, you should call your company and file a protest... you MAY be able to get your money back

  • SQL Server 2012 Always ON routing to particular server based on User Name

    I have configured SQL Server 2012 with AlwaysON availability groups. I could route my connections to Secondary node when I put the applicationintent = readonly on the connection string. However I would like to route all of my connections from particular
    user name to my read only node. How can I accomplish this without changing connection string (Reason is I would like to be able to route connections for read only query to some older application client that doesn't support applicationintent parameter).

    Hello,
    There is nothing built in that will allow you to dynamically re-route connections based on usernames. This may be achieved outside of SQL Server through some sort of network appliance, but I can't say for sure.
    Would it be possible to upgrade the SQL Client (to 2012+) for the old application and then change the connection string?
    Sean Gallardy | Blog |
    Twitter

  • Yet another User Name or password incorrect

    Like thousands (tens of thousands?) of users I simply cannot get FaceTime to work.
    I keep getting the "user name or password is incorrect" message.
    Initially I wondered if the problem was the discrepancy in Apple's password protocol - on iTunes my password is all lower-case letters, but when changing it for FaceTime it has to have an upper-case letter and a digit.
    But even that didn't work, nor did setting up a new AppleID, nor did changing the DNS (an app that doesn't work with a user's normal DNS server is surely DEEPLY flawed), nor did doing a complete reset/restore (again, things are DEEPLY flawed if that's a necessity).
    I did manage at one point to connect, but then the next time I tried to connect it failed again.
    And looking around there seem to be huge numbers of people having similar problems, and all sorts of suggestions to fix it ... going on for MONTHS.
    FaceTime was supposed to be a big selling point for the device ... simple and easy to set up. Clearly Apple has failed on this BIG TIME ... and I'm no computer slouch, having been diagnosing and helping people with computers and networks for a very long time.
    SO what do I do next?

    this is quite the dilemma, but i have another take. my household is new to the mac. bought our first macbook pro in june, the first ipod touch 4g for my daughter this christmas. knowing that we bought the touch, we downloaded the facetime beta for mac in mid-december. on christmas morning my daughter opened her touch, set up factime with her gmail address and we immediately were facetiming. then, on december 30 my wife and i decided to buy our first iphones. they were the 16gb iphone 4. again, facetime worked immediately between each iphone and between the ipod touch and iphones. i don't think it's apple's fault, knock wood. i just think there are so many variable out there as far as router settings and such. there are many people with facetime problems that get them figured out and it turns out the ipod touch itself was not the problem, and many people go to the apple store and facetime works fine. i read these facetime threads with interest for some geeky reason. good luck.

  • Creating User Name & Password field

    Hi All
    I am using Captivate5 and I am in process of making a quiz for my team. I have done some trials and I am confident with building a quiz and gettiong it to work.
    Here is my problem:
    I want a login page at the start of the quiz. I want the user to type in thier name and the password would be thier staff number i.e
    A Smith = 12345678
    B Smith = 23456789
    C Smith = 34567890
    and so on.
    Only once the user name corresponds with correct staff number, user can proceed with the quiz.
    I am new to Captivate and would appricate if you guys can provide a step by step approach so that I can find my way around all the options :-)
    Regards

    Hello,
    Real pain is a little bit exaggerating, the script is not that difficult (bit tedious because of the repetition needed for the 30 possibilities) but normally this is not a functionality that should be done by Captivate.
    The username entered will have to be stored in a user variable, that can be done by associating the entry in the TEB to this variable (Properties panel). Based on this entry you will have to launch an advanced condtional action with 30 decisions (sort of questions) that compares this user variable with the 30 possible usernames. If one of them is OK, the corresponding password can be stored in a second user variable. If none is correct an error caption will be showed.
    When the password is entered in the second TEB, the submit button (or shortcut key) should launch a second advanced conditional action that checks if the entry in this TEB corresponds with the value stored in the second user variable. Depending on this check the account will be accepted or another error caption pops up.
    That is all. And really I do not see another way, except using a LMS or reporting to acrobat.com or an internal webserver. Do you want to try it? Did you already create advanced actions?
    Lilybiri

Maybe you are looking for