User Only Able To Reply Via eMail

Hi Adobe Admin:
There's a user who started a thread over on the Photoshop Windows forum, but can't seem to get back into the web-based forum interface. He claims his login hangs up no matter what browser he uses. He can't create a new thread here for that reason, so I'm helping out...
See this thread:
http://forums.adobe.com/message/4073685?tstart=0#4073685
-Noel

Yes, the load of spam was horrible, and all posting (at least in the US) was curtailed for several hours on Sunday, Dec. 11.
My experiences mirror CurtY's, as to the timing. During that time, as I experimented to see if the lack of posting was peculiar to me, or my settings, I found forums just filled with spam, including this one. During that time, the best that I could do was Report Abuse for each post, but could not "turn in" the posters. In one case, two were working in tandem, with one (the major poster) doing the OP, and a minion following along with the same spam post, as a Reply.
Yeah, it truly was Black Sunday around here. I feel sorry for all the new subscribers, who could find no clue, as to why they could not post. At least some of us "old timers" were able to figure it out, once they tested their log-in, and several forums. The new folk probably went out and created a half-dozen I.D.'s, while trying to post. Adobe-Admin will probably get dozens of "WTH, I have X accounts now!" posts.
Hunt

Similar Messages

Only able to reply to emails, not initiate them

Can anyone walk me through in laymans terms what I need to do to correct this? I am only able to reply to emails, not initate them myself. I get the error message:"The recipient is not recognized" I have three separate email accounts that all show to have been successfully registered. I have a BB 8700c.

hello,
can you describe what the different steps between the moment you click "compose" and the display of that error ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Reply via email broken

I've just tried twice to reply to a thread via email (using Gmail), and it failed both times.
Here's what I get in return:
This is the mail system at host mail.sgaur.hosted.jivesoftware.com.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to <postmaster>
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
                   The mail system
<[email protected]>: host
    10.137.24.42[10.137.24.42] said: 553
    <[email protected]> address
    unknown. (in reply to RCPT TO command)
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 5.0.0
Remote-MTA: dns; 10.137.24.42
Diagnostic-Code: smtp; 553
    <[email protected]> address
    unknown.
[copy of the original email]

try67 wrote:Diagnostic-Code: smtp; 553
    <[email protected]> address
    unknown.
Translation: user 114084 not subscribed to message 3567896.
http://forums.adobe.com/rpc/rest/forumService/messages/3567896 shows that message 3567896 belongs to thread 827101.
http://forums.adobe.com/rpc/rest/watchService/isThreadWatched/114084/827101 shows user 114084 is subscribed to that thread so I suppose this is a bug. I think this is actually a symptom of a bigger problem that surfaced recently and have pinged Adobe to escalate this to Jive.

Users not able to authenticate via short names

First it was VPN and now it's happening to my radius server. Users aren't able to authenticate via their short names/usernames. The only way they are able to authenticate to these two services is by using their full name as entered in the LDAP directory. Previously "jsmith" would work, but now you have to enter "John Smith" This is very frustrating. Other services like calendar, mail, addressbook, webdav are unaffected by this issue. Any reccomendations? Thanks

Hi JFWX5,
I recently experienced a very similar problem myself, all services was running fine with no problem with authentication except for the calendar service; namely the webcal.
Throug the Server Admin tool (not the Server app) I checked the log for Open Directory server and then explicitly for Kerberos which was comlaining that it didn't find the database for looking up users trying to authenicate themselfs.
I found this article in the Apple knowledge base discussing a similiar problem: http://support.apple.com/kb/TS2938
By executing that terminal command Open Directory and Kerboros was up and running for my webcal.
PS: REALM_NAME should be in all caps and it is the DNS hostname for your server ex. SERVER.EXAMPLE.COM.

Grab and capture and convert file to be able to send via email????

Hi experts,
I have been trying to capture an image from a website through grap and capture
which works well and converts to a .tiff file.
What I am trying to do is to be able to take the file and import it into an email
and send it to people (primarily PC users). However they get nothing in their
email.
someone had suggested converting it to a .jpg file BUT I am not familiar how to do that (I did just change the .tiff to .jpg BUT that didn't seem to make any
difference.)
Cutting and pasting also won't work as the total image will not appear, only some info will be transferred.
Does anyone know of an easy way to grab and capture an image an then be able to transmit it in its entirety through an email file?
Thanks,
Zentor

Also, an even easier way, many times, is to just
use
your mouse to drag the image from the website to
the
desktop. If it was posted as a JPEG it will still
be
one after dragging. However, be aware that just
because you can do this doesn't mean you have the
right to do so.
Also Control-Click (or Right-Click with a two button
mouse) and use the menu to "Save Image to ...." or
"Copy Image"
When I Control-Click the pop-up menu will only give me the following
choices:
Back
Reload
Save Page As
(and a few others)
When I used the "Save Page As" it create an HTML file which when I emailed
it --only some information came through -- not the whole image
THERE IS NO "SAVE IMAGE TO" OR "COPY IMAGE" OPTION
Your first suggestion works real well and if there is a short-cut or I am
doing something wrong, please let me know.
Thanks
Zentor

Only able to play via Itunes

hi, apart from the odd drop out here and there my airport express works very well, however it's frustrating that if i'm using one of my digital radio widgets then i have no way of streaming that to the airport express
am i missing something?
will leopard have this function ?
thanks

You can use Airfoil, but watch out for the delay of the sound

Can't share via email from Preview Share button

I'm running Yosemite. I have Outlook for Mac (newest version, 15.6) set up as my default mail application. In the Share button menu, the Email option appears properly. However, when I attempt to share a document via email within Preview using the Share button, I merely get an error alert tone. All other Share options (Messages, etc.) work fine. I am able to Share via Email from other apps without a problem. The problem seems to lie within Preview. I've tried resetting Preview to the best of my knowledge by deleting the plist, etc. Any other ideas?

Thanks. Yes, I've done so. The Outlook icon does appear in the Share menu, but when I click on it, I only get the alert tone.

Acrobat hangs when sharing via email. Why?

I just installed the entire CC suite, including Acrobat 11 (or XI for you 1st century Romans out there). I was somewhat puzzled to see that when I select share by email the PDF still hangs with the spinning beach ball as it has for the two previous versions if not more. Is this a problem with Acrobat, MS Outlook or my particular set-up? It's hard to believe it would be with Acrobat because it has been a problem for at least the last three versions.
Thanks for any help,
Mike

So I'm the only person having this problem or am I the only person sending PDFs via email?

User not able to receive an emaik from SAP to Outlook.

User is not able to receive an email from SAP to Outlook.In SCOT the configuration to receive email has been set up and all other users are able to receive the emails except one user. Even the email address of the user is correctly entered in the user master record. What is the authorization required to be setup for this user from security perspective ?
Thanks.

Hi,
We have configured the SMTP server in our system to send out mails, but we donot know the configurations for receiving mails. [ We are not using SAP exchange connector (is it needed?) ]
I have read the note 455140 and 54617.
But i am stuck on , What are the configurations to be done on the MS Exchange Server 2003 for redirecting the mails received in the inbox of a particular user to the SAP system.
The note says it has to be configured to redirect mail to <hostname>: <port> But where exactly do we define the routing rules.
If anyone has a detailed document on what are the configurations involed in receiving mails, Please send it.

Not able to recieve invitation email

Hi
I am trying to add and Email "[email protected]" in our Spicework help desk, but this email id is not able to receive invitation email.
but other users are able to receive invitation email.
So please help me on this.
Thanks
Ankit Kumar
This topic first appeared in the Spiceworks Community

If it is asking you to verify the account then you should be able to change the email. If the account is already verified then follow this article to help change it to correct email address http://support.apple.com/kb/HT5621?viewlocale=en_US.

Typing a reply to emails is not registering

For a few days now, since I updated firefox and the browser changed I have not been able to reply to emails---the typing simply does not register

You updated what?
You posted here with a 2 1/2 year old version of Firefox.

TS3899 I am able to check my emails and share photos via email but I am unable to reply to emails or write new ones

I am able to check my emails and share photos via email but I am unable to reply to emails or write new ones

I am able to check my emails and share photos via email but I am unable to reply to emails or write new ones

How does the EDB handle deleted items and why am I only able to recover some and not all previously deleted emails?

Hello,
I have been unable to locate information regarding how the EDB handles deleted files. I am able to recover deleted emails from the EDB; however, there are numerous emails that I know have been deleted, that were not recovered during the recovery process.
Is this because the EDB dumps deleted emails once it reaches a certain amount of entries? Or is it more likely the deleted items are corrupted and thus not recoverable? Thank you for your time and I look forward to your responses. The
product in question is Microsoft Exchange Server 2007.

Great information from the other posters and one other possible explanation is if the users did a HARD DELETE. More information on this below
Pre-Exchange 2010 Dumpster 1.0 worked as follows;
1. When a user does a normal delete of an item via Outlook or OWA it gets sent to your deleted items folder
2. If the user then empties deleted items folder those items are then marked with the ptagDeletedOnFlag attribute which in essence hides them from the view of the user
3. At this point the user can use the Recover Deleted Items function in Outlook to recover those items as long as the items were NOT purged using the Recover Deleted Items option OR the items have not passed still the deleted item retention period.
NOTE: Every day there is a nightly maintenance process that in short looks through the DB and examines items that have been deleted. Items that have met or exceeded the deleted item retention period are purged from the system and are
completely non-recoverable. More about this at the end of my post.
4. However if the end user were to delete an item from the Inbox or another folder in Outlook by using Shift + Delete aka a Hard Deletion the item is left in its orignal location and gets marked with the ptagDeletedOnFlag attribute which again just
hides it from view.
5. By default you can only use the Recover Deleted Items option on the Delted Items folder. Howeve you can make it so that you can recover hard Deleted items from other folders. More on that here http://support.microsoft.com/kb/246153
5. The problem with this method though IMO is that you have to know where to look and that can be rather time consuming.
6. If you want a more elegant method to resolve this and are open to using 3rd party utilities check out Lucid8's DigiScope.
http://www.lucid8.com/product/digiscope.asp which will allow you to open any offline copy of the DB from a forensic point of view and to solve your specific issue you can either turn on a filter to ONLY
show hard deleted items OR you can search the entire store and all mailboxes for just deleted items and can then view or export them to PST or MSG format. You can download the product and obtain a 30 day demo license which will allow you to find any
hard deleted items, however to view them or export your would need to purchase a license.
NOTE: When a database is backed up or copied it is an "Offline" database and then its offline the data retention period is not an issue because the nightly online maintenance process can only act on a database that is mounted on an
Exchange server. So for this reason if you want to recover the most data possible use offline copies/backups of the DB with a 3rd party utility like DigiScope
NOTE 2: Exchange 2010 and 2013 use Dumpster 2.0 which is an entirely different beast and I will not go into that in this post since its nearly 1AM however DigiScope can expose that information as well
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003
--> 2007 --> 2010 --> 2013 with Lucid8's
DigiScope

I have downloaded the latest pages update on my iPad, but my iMac still has version 4.3 and I cannot find out how to update it only desktop. When I try to send something from my iPad pages to via email to be opened on my desktop in Pages, it won't open P

I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?

The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
Or contact AppleCare. They made this mess, let them fix it.

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for thos

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for those with adobe pro. i could not get it to work with reader. is there a way i can make it work for reader?

Noted.
The LiveCycle user to user forum is across town at:
Adobe LiveCycle
Be well...

User Only Able To Reply Via eMail

Similar Messages

Maybe you are looking for