User Parameters for LSO?
Are there user parameter settings which exist for LSO?
If so, can you provide a list and description of different settings and what they do?
Regards,
Gary
Hi Sharon,
Thanks for confirming our suspicions.
Regards,
Gary
Similar Messages
-
How do u handle the user parameters for a currency field.
How do u handle the user parameters for a currency field.
Decimal saperator and a hundreds saperator. (depending upon the user parametes set for the user the saperators may differ)
Eg: currency field: 13.896,01 (In this case u2018,u2019 is a thousand saperator and u2018.u2019 is a decimal saperator) How to handle this one.
Regards,
Ram.Hi,
Try this code....
DATA: V_KURSF1 TYPE c LENGTH 10,
v_kursf2 type c LENGTH 10,
v_dcpfm TYPE xudcpfm, "Decimal or Thousand Notation
v_thousand TYPE char1, "Thousands Notation
v_decimal TYPE char1. "Decimal Notation
CONSTANTS: c_x TYPE char1 VALUE 'X',
c_y TYPE char1 VALUE 'Y', "Value Y
c_comma TYPE char1 VALUE ',', "Comma
c_point TYPE char1 VALUE '.', "point
c_blank TYPE char1 VALUE ' '. "Blank
IF v_dcpfm IS INITIAL.
SELECT SINGLE dcpfm
FROM usr01
INTO v_dcpfm
WHERE bname = sy-uname .
IF sy-subrc = 0.
CASE v_dcpfm.
WHEN c_x.
v_decimal = c_point.
v_thousand = c_comma.
WHEN c_blank.
v_decimal = c_comma.
v_thousand = c_point.
WHEN c_y.
v_decimal = c_comma.
v_thousand = c_blank.
ENDCASE.
ENDIF.
ENDIF.
Find c_point in wa_segment-exchange_rate. ( Eg:ield)
if sy-subrc = 0.
replace c_point in wa_segment-exchange_rate with v_decimal.
endif. -
Getting problem with running RWBLD60 with User parameters
Hi All,
I am trying to run a report using rwbld60 from command prompt which has input parameters
I tried like this but it didnt work out
rwbld60 module=reportname.rdf userid=scott/tiger@orcl destype=file desformat=pdf
desname=report_out.pdf parameterform=NO params=parms_1 traceopts=trace_prf tracemode=trace_replace
tracefile=trace.txt
Can any one please tell me how i can pass user parameters for rwbld60
Thanks,
Amaractually, i do my FYP on bluetooth chatting...
and there will be more than two emulators running at the same time..
one of my frens said that if u want to run more than one emulator u just simply click on run button..
and it will appear on the screen.. -
Hi PM Gurus,
can somebody suggest me how to do a mass update of user parameters for selected set of users. I want to add 3 new user parameters.
Cheers
DeepalHi Manfred
Thanks for the reply. But I already looked at this option and it cannot be used for parameter maintenance.
Cheers
Deepal -
Specifying Non-String User Parameters in The Block Comment Dialog Tag
I am trying to add user parameters for a block. I followed the instruction provided in section 4.3.7 (comments) of sysytembuild user's guide.
The steps were as follows:
1- I added a new parameter named (a_r) to a gain block (from the User Parameters section of Comment tag dialog field).
2- I selected this parameter and assigned a value of 5
Now, using the SBA command I retrieve this parameter:
------------------------------- Xmath outputs
[n=UserParameterName, p=UserParameterContent] = queryblock(1)
n
n (a string) = a_r
p
p (a list with 1 elements) =
1:
5
p(1)
ans (a string) = 5
---------------------------- end of Xmath outputs
Accordin
g to the documentation, using suffix (_r) will specify a real parameter (_i for integer and _s for string). However, the list object
obtained from "UserParameterContent" includes a string element and not a number. This can be verified by:
--------------------------------------- Xmath outputs
p(1) *2
Cannot evaluate * of a string.
modifyblock 1 ,{UserParameterContent = list(5)}
Expecting a list of strings
--------------------------------- end of Xmath outputs
It looks like that independent of the naming convention, the user parameters are stored in a list with string elements in contrast to what
mentioned in "Editing User Parameters Dialog" of the Help topics:
"To create a new userparameter, enter a name in the User Defined field, and then click the Add button. Note that the name must have
one of the following suffixes: _s (string), _b (boolean), _r (real), or _i (integer). "
The questions are as follows:
1- Is there a way to store n
on-string type user parameters?
2- If there is a way for that, then, is it only for scalar numeric values or vectors and matrices can also be stored in user parameters?
Thanks,The Comments Tab is generally used to define User Parameters that will be used with DocumentIt. The suffix (_s, _b,_r, etc) is to designate the datatype for DocumentIt.
All user parameters will be passed as string data to Xmath. As you noted the value 5 is passed as a string. To convert this to a scalar use the makematrix command. After you assign a value of 5 to the a_r user parameter use the SBA command queryblock as follows:
n=UserParameterName, p=UserParameterContent] = queryblock(1)
then enter
m=makematrix(p(1))
this will return a scalar.
To get a vector in Xmath from the User Parameters you must assign the values differently on the Comment tab. Define a user parameter and assign its values by entering a carriage return after each element.
For example assign the following value to user paramter a_r:
5
6
7
8
Using the queryblock command you should now get:
p(1) is a column vector of strings
again use the makematrix command to convert this to a vector of scalars.
m1=makematrix(p(1))
Matrices will require a different user parameter for each column of the matrix. For example to add a column to the previous vector, you will need to go to the user parameters and add a new parameter (call it b_r) assign its values with the carriage return after each element for example:
0
1
2
3
Again use the queryblock command. Now p will have 2 elements (one for each parameter). To create a matrix enter:
m2=makematrix([p(1),p(2)])
NOTE: The order the user parameters were entered in the Comment Tab will not necessarily correspond to the element they return as when using the queryblock. For example from the previous procedure, do not assume the second user parameter entered (b_r) is going to be returne
d as p(2). -
User Parameters default to Selection Screen params
Hi Experts,
I am having a SELECTION SCREEN with Parameters for Company Code(BUKRS) & Purch Org (EKORG).
I need to default the values of these fields with their respective user parameters for BUKRS & EKORG.
manintained iwhich are 'EKO' & 'BUK' in my program.
How can i do that?
Thanks
DanHi,
If the user maintains these parameters in their profile with the values , then the values will be populated from there.
System->User Profile-> goto the parameters tab there you can ask the user to maintain the parameters you mentioned with the default value they need and save this.
Now when that user runs the report, the values from the user profile will be copied to the respective selection screen parameters
regards,
Advait -
Calling report user parameters from forms
If I run the report from report builder, it will prompt me the user parameters for input, however if I create a mouse click trigger in a form to call the report, the parameters won't prompt, how can I make it prompt ?
I want to create a text field on the form for user to input the user parameter values.
thanks.create a text-field or drop-down or what ever object that you want to in the form ...
and then use run_report_object to run the report by passing parameters from your form (from the text field or drop-down) to the report.. -
How to adjust mouse or trackpad parameters for the user selection screen?
This is not critical, but annoying. I can change the mouse or trackpad parameters by user, so anyone can use their own mouse or trackpad adjustment. However I can not locate how to change this parameters for the welcome or user selection screen. In my case I have two users, both of us use the trackpad with the one touch for click function, so no one press physically the trackpad for a click. However, as the default parameter is the touch function deactivated we have to actually click the trackpad in that exclusive screen.
Another example with mouse, normally we use the mouse with almost double of the default acceleration, but when in the user selection screen the mouse assumes default configuration and feels super SLOWWWWWWW.
Again, this is not critical, but would be very nice to be able to modify this parameters in the welcome screen.
Tyrone CarrionFor the login screen, you are not associated with a normal user, but the system defaults...try logging in to the Admn account and change the behavior there...those settings should then apply to the login screen.
-
I do not see the user interface for the Logic Pro software instruments. I can hear them play through my midi keyboard but cannot see them to adjust the parameters. Please advise.
Couple of things - you can open the interface for any instrument or plug-in by double-clicking its insert slot on the channel strip. You can configure Logic to automatically open the interface for a plug-in when you first instantiate it in the preferences. Go to Logic Pro > Preferences > Display > Mixer, and check the box for "Open plug-in window on insertion".
-
Documentation Parameters for the AWT User Interface M I 7.1 NOT working?
Hi:
I found this doc: http://help.sap.com/saphelp_nwmobile71/helpdata/en/47/8baf5f1240444ba39d0bca8704003f/frameset.htm
(see "Parameters for Mobile Client for Handhelds" ---> "Parameters for the AWT User Interface" )
the parameters are persist OK in the client´s BD but it seems not to affect the layout......
Any idea?
Thanks a lot for your time on this post.
Rocío.I don´t required any more.
-
Front end components are needed for LSO
Dear experts,
We want to implement Training & Eventmanagent in ESS portal. I searched in sdn .But i didn't get proper solution. It seems from EHP5 onwards these services /iviews are obsolete and TEM is repleced by LSO only.
for LSO Implementation which Business Package and portal components I need to be installed and which Add on to be installed in Application server.
our landscape: portal: NW EP 7.01 ehp2 , ess wda1.50 sp5, mss bp 1.51 sp5
R/3-----ECC 6.0 EHP5
please suggest me regarding Front end Software Components with SP's for LSO implementation.
Thanks
veeranjinote that
Usage of the learning solution landscape would be captured in the
report as a engine metric. There is no need to set a pricelist and
a user type.
All users logging into the SAP systems irrespective of the modules,
need to be classified under the contractual user types :
ERP Developer - BA
ERP Professional user - AX
ERP Limited Professional user - AY
depending on the activities of the users matching with the usertype
definition.
service.sap.com -> SAP Support Portal -> Downloads -> SAP Support
Packages -> Support Packages and Patches - Entry by Application Group ->
SAP Application Components -> SAP ERP -> SAP ERP ENHANCE PACKAGE -> EHP4
FOR SAP ERP 6.0 / NW7.01 -> Entry by Component -> Portal Content
Here, you will find the two BPs:
BP ERP INSTRUCTOR & TUTOR 1.41
BP ERP TRAINING ADMIN 1.40
Business Package for Learning (SAP ERP) 1.0 (PE-LSO-LPO)
and check here
http://help.sap.com/erp2005_ehp_04/helpdata/en/43/9065e6d9f521a6e1000000
0a1553f6/frameset.htm -
How to find the appropriate user exit for invoic02 idoc in idoc_output_invo
Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM -
REG:USER EXIT FOR DATA SOURCE 0HR_LSO_1
Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
LOOP i_t_data INTO my_struct
my_struct-KOSTL "Here you'll must have your Cost Center
...etc...etc...etc
ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon -
User exit for data source 0HR_LSO_1
Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
LOOP i_t_data INTO my_struct
my_struct-KOSTL "Here you'll must have your Cost Center
...etc...etc...etc
ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon -
How to find the user-exit for transaction fpp2
Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar.
Maybe you are looking for
-
my iphone on russian sorry if i say some think wrong
-
Create and assign new user in SRM org struct when HR Distribution is active
Hello experts, In SRM HR Distribution list is active. Now requirement is we want to create new user in SRM and assign it with the SRM Org structure. 1.)Do i need to create a user in SRM and in ECC HR i mean in both the system or in ECC-HR only.? 2.)W
-
Creation of additional drop downs in 'Item overview' tab page on portal
Hi, I would like to know how do we add additional fields/drop downs on the xRPM portal in the 'Item Overview' tab page. For eg: We are having TECHNOLOGY TYPE field at Item overview tab page in xRPM portal - Portfolio Management view. Wherein we can
-
Integrating Flash With Java Game
hi guys, i'm doing the final touch up for my RPG, i plan to put flash animation as intro before my game starts, is it possible to call .swf file directly from java itself, how am i gonna make it possible??Please advice~ Thanks~
-
How do you make an object stay still when you have put a camera in??
Hey everyone, I seriously need some help! I have a newspaper page set up in Motion which includes lots of different text layers. these bits of text stay where I have put them when I add a camera movement which is great but when i add a shape like a s