User print out the report of Tcode-fc10 the printing is 7-8 times repeated

Hi,
User print out the report of Tcode-fc10 the printing is 7-8 times repeated.printer is SL00004 Korea.What can I do? so that user gets only one copy .Is there any setting .User is getting this issue only when they print out the report of T-code(fc10) only.
Moderator message: no evident relation to ABAP development.
Edited by: Thomas Zloch on Jan 18, 2011 3:09 PM

I suspect you may be using ActiveX print control(?). If that is the case, look at permission issues.
1) If you run the app on the server it's self, are you able to print from there?
2) If you log in as an admin on the server, can you print?
3) If you log in as an admin on the a workstation, can you print?
Process Monitor will be a good utility to use to check permission issues. Process Monitor is here:
http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx
Ludek

Similar Messages

Print out of report

hi experts ,,,,
1)...i am taking the print out of report.
i given the horizantal and vertical lines......
i did not want them in output(lines)....
how can i do this, any option is available.
2) how to delete the leading zeroes...
i jave number like this 00000876. i need only 876.
how can i get it. any command u can suggest me..
thanks in advance.
Message was edited by:
dasr r

hi,
U can either use this function module also
CONVERSION_EXIT_ALPHA_OUTPUT
or
SHIFT <yourField> LEFT DELETING LEADING '0'
or
try NO-ZERO option of WRITE statement
or
Another way is to create another variable of type I and assign the value into it
example:
DATA: L_NUMC(08) TYPE N.
DATA: L_INT TYPE I.
L_NUMC = '00000018'.
L_INT = L_NUMC.
Result will be = 18.
Hope this helps
regards.

How to print out multilingual reports from the main report using Xliff temp

Hi all,
How to print out multilingual reports from the main report using Xliff temp?
When I want main report call subtemplate and finish xliff tranlation
<?for-each@section:INVOICE?><?end for-each?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if trx_number = 142 call Finnish translation and if trx_number =144,
call English translation.
<?for-each@section:INVOICE?><?end for-each?>
<?if:TRX_NUMBER=’142’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
<?if: TRX_NUMBER=’144’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Does anybody know what could be wrong?
BR
Kari

Thanks Amit,
I have two layout, main-layout and sub-layout
Main layout call subtemplate
I have registered layout and xliff-file
Main template
Localized Templates
File Name           Language Territory
XXNS_INVOICE_MAIN.rtf      English
SUB template
Localized Templates
File Name           Language Territory
XXNS_INVOICE_SUB.rtf      English
Translatable Template
File Name           Language      Territory
XXNS_INVOICE_SUB.rtf      English      United States
Available Translations
Language Territory Progress
English Finland Complete
If main report call subtemplate and finish xliff tranlation
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
.....end if;
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
.....end if;
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Do you it's set up problem or program problem
BR
Kari

Printing out a report in PDF format

Hi,
A colleague and myself have been converting an existing system for our customer from the traditional client/server architecture to a web-deployed system on 10g application server. I have been converting the reports from report 3.5 to reports 10g. The reports work fine but the problem we have is more to do with the printer than the reports itself.
We have a requirement to print a barcode label (and some other text) to a DataMax printer. This printer seems to be quite fussy about the fonts that are used and essentially if you don't use the DataMax fonts the label comes out blank. I have managed however to produce reports as PDF and if I click the Printer button in the adobe control the report will print out as a bitmap image on the printer.
Is there any way that I can produce the report as a PDF file and get it to print automatically ?

Prohan,
I have never been able to get PDF generation working from APEX. I have asked for some help on this forum, but go no responses. And I just won't spend the outrageous license fees for Oracle BI Publisher. But I have been successful in doing what need with some simple methods.
1. If the email has some simple tables or formatted information from the database, use a PL/SQL procedure to generate an HTML formatted message and the utl_mail package to send the html formatted email. I use this for many customer and internal emails from both APEX and Oracle Forms applications.
2 There is a stand-alone product PL/PDF (http://www.plpdf.com/) that allows you to generate PDF files directly from PL/SQL (again not APEX specific). I have demoed this product and it works pretty well, but I am not using it at this time because of the licensing that requires a fee for each database instance. It's not really that expensive, but it's more than I want to spend for the number of databases I have.
3. If you have Acrobat Professional, you can export XML file from the database and create "mail merge" type PDF documents. But you can also do this with Word and a simple CSV or Excel output. Both of these are pretty easy from APEX. I have used both. I found the Work mail merge to be a little easier for end users to use, so this is my primary choice. But Acrobat Pro method also works well.
If you are interested in any examples of these methods, let me know and I can send you something.
Bill
Bill

Print out of Report Region dropping negative values

I am very new to APEX (< 2 months) and don't have much of a programming background. I have created a report layout using BI publisher and made it available as a shared component in my APEX applicaiton. When I print the the report region, most of the data displays fine on the print out, but any amounts with negative values are suppressed. I can view the negative amounts just fine when they are displayed on the report region itself.
It took me quite a while to get the style sheets from BI Publisher to work with APEX. I thought the two were supposed to be compatible. Does anyone know how to resolve the issue above or if their are any known compatability issues between BI Publisher and APEX? We are on APEX version 4.2.1.00.08 and BI Publisher version 11.1.1.

This was indeed a bug. Response from Oracle:
This issue has been noted by development as a bug and I have file bug 16224878 regarding your issue. The issue explained by development pertains numeric format string which wraps the negative value in angle brackets: < val > , and the report is treating this as a HTML tag and filters it out. It looks like this is happening only for classic report regions, i.e. report queries seems to support this type of numeric format mask.
A work around would be to turn off printing for the classic report region and to provide a button to a report query for printing, using the same SQL for the report query as is used for the report region. Alternatively you could also use a different format mask.

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this

<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

Directly print out a report

I make a form and a report.I try to directly print out it.but before the result print out,a html coding print out. How to print only the result of the report?
The below is the procedure in the Form.
PROCEDURE sendparam1 IS
     report_id                              Report_Object := FIND_REPORT_OBJECT('SHSEL_DAILY_FUNCTION');
     report_server_name     varchar2(100) := 'repfodbopera';     --Report Server Name (repseokyooperawebopera/repfodbopera)
     report_format                    varchar2(20)     := 'PDF';                              --Report Type
     report_destype_name     number                    := PRINTER;
     report_file_name          varchar2(100)     := 'SHSEL_DAILY_FUNCTION';     --Report File Name
     report_otherparam          varchar2(2000):= 'paramform=yes';
     report_servlet               varchar2(100)     := '/reports/rwservlet';
     report_folder                    varchar2(100)     := 'M:\micros\opera\production\runtimes\';     --Real Report File folder(http://fodb/webtemp/opera/)
     pdf_folder                    varchar2(100)     := 'M:\micros\opera\operaias\webtemp\opera\';     --Real Report File folder(http://fodb/webtemp/opera/)
     report_message               varchar2(100)     := '';
     rep_status                         varchar2(100)     := '';
     vjob_id                                   varchar2(4000):= '';
     hidden_action                    varchar2(2000):= '';
     v_report_other               varchar2(4000):= '';
     report_user                         varchar2(100)     := 'OPERA/OPERA@OPERA';     --Opera DB
     resort                                   varchar2(20)     := 'SHSEL';                    --SEOKYO
     PMS_ID                                   varchar2(20)     := 'OPERAREP';
     PMS_PW                                   varchar2(20)     := 'OPERAREP';
     v_time varchar2(10) :='';
     v_pdf_name varchar2(200):='';
Begin
     --message(to_char(sysdate,'mmddhhmiss'));
     v_time:=to_char(sysdate,'mmddhhmiss');
     v_pdf_name:=report_file_name||     v_time||'.PDF';
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
-- SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,report_folder || report_file_name);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,report_server_name);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,report_destype_name);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,report_format);
     --SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,report_folder ||report_file_name||     v_time||'.PDF');
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'OfficePrt'); --프린터 이름
     hidden_action := hidden_action || '&report=' || GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME);
     hidden_action := hidden_action || '&destype=' || GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE);
     hidden_action := hidden_action || '&desformat=' || GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT);
     hidden_action := hidden_action || '&userid=' || report_user;
     hidden_action := hidden_action || '&desname=' || GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME);
     v_report_other := v_report_other || 'P_REPORT_DATE=' || :TXTREPORTDATE;
     v_report_other := v_report_other || '&P_END_DATE=' || :TXTREPORTDATE;
     v_report_other := v_report_other || '&P_RESORT=' || resort;
     v_report_other := v_report_other || '&P_USER=' || PMS_ID;
     v_report_other := v_report_other || '&P_PASSWORD=' || PMS_PW;
     v_report_other := v_report_other || '&P_REPORT_NAME=' ||report_file_name;
     v_report_other := v_report_other || '&P_BUSINESS_DATE=' || :TXTREPORTDATE;
     hidden_action := hidden_action || '&' || v_report_other;
     hidden_action := report_servlet || '?_hidden_server=' || report_server_name || hidden_action;
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'pfaction=' || hidden_action || ' ' || report_otherparam);
     report_message := run_report_object(report_id);
     rep_status := report_object_status(report_message);
While Rep_Status In ('RUNNING','OPENING_REPORT','ENQUEUED') Loop
Rep_Status := Report_Object_Status(report_message);
message('status : '||Rep_Status);
End Loop;
     if rep_status = 'FINISHED' then
          --message(rep_status);
          vjob_id := substr(report_message,length(report_server_name)+2, length(report_message));
          Web.Show_Document(hidden_action,' _blank');
          --Web.Show_Document('../../webtemp/opera/'||v_pdf_name,' _blank');
          --Web.Show_Document(report_servlet || '/getjobid' || vjob_id || '?server=' || report_server_name, ' _blank');
     else
          message('Error');
     end if;
end;

I can print out the report but the html page as the below is printed before the report.
Why is the html page printed ? and I don't want to print out the html page.
<html>
<body dir=LTR bgcolor="#ffffff">
<form method="hidden_run_parameters" type=hidden value="server=repfoopera&rep......
Message was edited by:
asterika

Stop the report from firing until the user clicks the Go button?

Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
Thanks

Thanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks

Users able to build reports and dashboards via the Web browser

Hi All,
My requiremts is "Users able to build reports and dashboards via the Web browser and perform ad-hoc queries and analysis online via the internet" .
Requesting to kindly let us me know the procedure to get resolve the above requirement.
Thanks,
KVR

Hi,
Go through the links below
Designing Microsoft Excel 2007 Chart
http://charts.jorgecamoes.com/how-to-create-an-excel-dashboard/
http://dashboardspy.com/dashboards/23/designing-microsoft-excel-2007-charts
SAP BUSINESSOBJECTS DASHBOARD BUILDER
http://www.sap.com/solutions/sapbusinessobjects/large/business-intelligence/dashboard-visualization/dashboard-builder/index.epx
http://www.sap.com/solutions/sapbusinessobjects/sme/reporting-dashboarding/index.epx
It may help you
Regards,
Marasa.

How to issue print command from report/form server to client printer on web

1) We have a client server application which is to be deployed on the web environment. The reports generated in our application are having a destination type as File. These reports are printed after applying some print format (escape sequences) which are passed on to the printer programmatically at runtime while printing.
Now when this application is shifted on to the Application server (Forms server & Reports Server )in web environment ,the report outputs would be generated in the application server as against the client in client server environment as the report server is on the application server.
Now while printing/accessing the report the output file will not be available to the client unless it is pushed on to the client side from the server . I am able to see reports in pdf/html output but in this case layout of my reports gets changed and I dont want to change my layouts or reformat my report layouts.
How do I redirect the report output from the application server on to the client within the D2k context and then execute print commands?
Note: In this case we want to use both DMT and Laser printing. Also note that we use escape sequences to adjust reports in desired printing papers.
2) We have second set of reports which we call as document because these are printed after capturing data from 'Form' using text_io utility (please note that for these documents we are not using any Report 6i functionality)and we print it from file using printing mechanism as mentioned above. These are working well in client server application. We adopted this methodology for getting better performance (in terms of speed as database server and network traffic is not involved) of printing. But now we are converting our application for web, we are finding it difficult how to capture Form's data from browser to client's machine and then executing printing commands which are stored in our application liabrary.
If you help me out by giving some suggestions, I shall be grateful to you.
null

Hello
I wonder if you ever solved this problem.
I have a very similar problem with Photoshop CS5 on Mac OSX 10.6 + HP Photosmart C7180.
If I choose "Photoshop Manages Colors" the results are lousy.
If I choose "Printer Manages Colors" the results are OK. not necessarily great.
I believe I have all the correct settings after going through books and web advice (and wasted a lot of paper and ink).
As far as I can see, "ColorSync" is the internal Mac management which is the only option available with "Photoshop Manages Colors" and "Vendor Matching" appears to mean the printer vendor (ie HP) will provide the matching. Either can be selected if "Printer Manages Colors" is used. It seems the type of paper can be set in three different places. if That's all a bit academic as the results are poor regardless.
My wife suggests I buy a new printer - Epson's looking good.
Any words of wisdom would be appreciated.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.

Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

SQL reporting - An internal error occurred on the report server. See the error log for more details. (rsInternalError)

I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
    <DataSource Name="DataSource1">
      <DataSourceReference>DataSource1</DataSourceReference>
      <rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
    </DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
    <ReportParameter Name="machine_id">
      <DataType>String</DataType>
      <Prompt>machine_id</Prompt>
    </ReportParameter>
    <ReportParameter Name="from_date">
      <DataType>String</DataType>
      <AllowBlank>true</AllowBlank>
      <Prompt>From Date</Prompt>
    </ReportParameter>
    <ReportParameter Name="to_date">
      <DataType>String</DataType>
      <AllowBlank>true</AllowBlank>
      <Prompt>To Date</Prompt>
    </ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
    <ReportItems>
      <Table Name="table1">
        <DataSetName>Main_Report</DataSetName>
        <TableGroups>
          <TableGroup>
            <Header>
              <TableRows>
                <TableRow>
                  <TableCells>
                    <TableCell>
                      <ReportItems>
                        <Textbox Name="textbox2">
                          <rd:DefaultName>textbox2</rd:DefaultName>
                          <ZIndex>1</ZIndex>
                          <Style>
                            <TextAlign>Left</TextAlign>
                            <PaddingLeft>2pt</PaddingLeft>
                            <PaddingBottom>2pt</PaddingBottom>
                            <PaddingRight>2pt</PaddingRight>
                            <PaddingTop>2pt</PaddingTop>
                          </Style>
                          <CanGrow>true</CanGrow>
                          <Value>=Fields!syscode.Value</Value>
                        </Textbox>
                      </ReportItems>
                    </TableCell>
                  </TableCells>
                  <Height>0.25in</Height>
                </TableRow>
              </TableRows>
              <RepeatOnNewPage>true</RepeatOnNewPage>
            </Header>
            <Grouping Name="table1_Group1">
              <PageBreakAtEnd>true</PageBreakAtEnd>
              <GroupExpressions>
                <GroupExpression>=Fields!syscode.Value</GroupExpression>
              </GroupExpressions>
            </Grouping>
          </TableGroup>
        </TableGroups>
        <Details>
          <TableRows>
            <TableRow>
              <TableCells>
                <TableCell>
                  <ReportItems>
                    <Subreport Name="subreport1">
                      <Parameters>
                        <Parameter Name="machine_id">
                          <Value>=Fields!machine_ip.Value</Value>
                        </Parameter>
                        <Parameter Name="syscode">
                          <Value>=Fields!syscode.Value</Value>
                        </Parameter>
                        <Parameter Name="from_date">
                          <Value>=Parameters!from_date.Value</Value>
                        </Parameter>
                        <Parameter Name="to_date">
                          <Value>=Parameters!to_date.Value</Value>
                        </Parameter>
                      </Parameters>
                      <ReportName>Holding_Summary_Multi_Period</ReportName>
                    </Subreport>
                  </ReportItems>
                </TableCell>
              </TableCells>
              <Height>0.25in</Height>
            </TableRow>
          </TableRows>
        </Details>
        <TableColumns>
          <TableColumn>
            <Width>10.5in</Width>
          </TableColumn>
        </TableColumns>
        <Height>0.5in</Height>
      </Table>
    </ReportItems>
    <Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
    <DataSet Name="Main_Report">
      <Query>
        <rd:UseGenericDesigner>true</rd:UseGenericDesigner>
        <CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
        <QueryParameters>
          <QueryParameter Name="@machine_id">
            <Value>=Parameters!machine_id.Value</Value>
          </QueryParameter>
        </QueryParameters>
        <DataSourceName>DataSource1</DataSourceName>
      </Query>
      <Fields>
        <Field Name="syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>syscode</DataField>
        </Field>
        <Field Name="display_name">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>display_name</DataField>
        </Field>
        <Field Name="customer_syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>customer_syscode</DataField>
        </Field>
        <Field Name="account_syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>account_syscode</DataField>
        </Field>
        <Field Name="machine_ip">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>machine_ip</DataField>
        </Field>
      </Fields>
    </DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
    offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
    <ReportItems>
      <Image Name="image1">
        <Sizing>Fit</Sizing>
        <Left>8.875in</Left>
        <MIMEType />
        <Width>1.5in</Width>
        <Source>External</Source>
        <Style />
        <Value>bottom_right_logo.gif</Value>
      </Image>
    </ReportItems>
    <Height>0.5in</Height>
    <PrintOnLastPage>true</PrintOnLastPage>
    <PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>

i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

Parameter REPORT for the Report Web item in the Web template is empty or mi

Hello,
I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
Web Item Report Error
Web template error in specifications for the Web item report
Parameter REPORT for the Report Web item in the Web template is empty or missing
Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
Contact your system administrator. This error was recorded
What can I do to solve this error?
Thanks!
XmchX

As DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
Thanks!
XmchX

User print out the report of Tcode-fc10 the printing is 7-8 times repeated

Similar Messages

Maybe you are looking for