User Settings for BEX Analyzer - Max number of values displayed
Hi Experts,
we are trying to change the Maximum number of values that get displayed from 1000 by default to some other number.
the setting windows that I refer to above can be reach by this path.
When you open up a Query in Analyzer, you are prompted to Variable Entry screen, if you click on the select on the list box next to a field (double squre boxes) then on the next pop windown that opens on the top right there is settings button (guy's face and box) this should bring you to User setting window, here go to Value Restrictions tab, you will see 1000 selected under No. of Displayed values....we want this number to be different by default for ALL Users.
What is the t-code or path to change this number in BW.
Hi,
its standard to have 1000 rows in sap BW 7.0. We can't change the default standard setting.
Thanks,
venkat
Similar Messages
-
Setting Default Global Settings for Bex Analyzer 7 for all users
We need to set default settings for Bex Analyzer Global Settings when we install SAP-GUI 7.2 in our user's workstations. The current default settings are that all of them are turned off. We would rather not have to run around and change each of our 1,000 user's settings.
Ed:. Apparently [OSS Note 1254112|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1254112] discussed how to adjust Windows Registry settings to resolve this.
Edited by: Charles Belt on Apr 28, 2011 10:01 AMJust so any one is looking for the correct solution and it worked for me.
Small correction to the information in the OSS note 1254112.
for setting the legacy version setting use the below string in the registry
"LAUNCH_VERSION" = "LEGACY" insted of "LaunchLegacyVersion"
Kiran -
BEX analyzer -Maximum number of rows (65535) exceeded. Result is incomplete
Hello Experts,
I am trying to Run a report on BEx Analyzer.There are around 200,000 records to be displayed in the result.
I am getting the below error.
Maximum number of rows (65535) exceeded. Result is incomplete.
Message no. BRAIN675
We are on SAP GUI 7.X and Excel 2007
Is there any setting that I have to change inorder for BEX analyzer to display all the 200,000 records.
Also any memory setting for the result set to be changed ?
Please let me know your thoughts
Thanks
DoodleHi Doodle,
The rows limit for Excel 2007 is 1 million so this is not the problem with row limitation. It seems like you have opened the pre-excel 2007 workbook in excel 2007, check your title bar if it says "Compatible Mode". This will limit you to old standard of 65K.
May be what you can do is , save your file using save as option and try running the workbook.
Your new file extension will be .xlsx
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 14, 2011 10:03 AM -
Issue with Data Provider name in variable screen for BEx Analyzer
Hello all,
We got an issue with Data Provider name in Variable screen in BEx Analayzer.
We want to change the DataProvider name there to Description of the report instead of its Technical name.
Any inputs are appreciated.
Thanks
KumarYou have to create a workbook to do this.
Refresh your query/report. In Bex analyser, there is one toolbar named BEx design toolbox, If you are not able to see it in analyser, right click on the toolbar space of BEx analyser and click on BEx design toolbox. Here, goto to design mode, by clicking on a sysbol like 'A'. after that place the curser where you want to see the Query description. and click on insert text (T) in BEx toolbox. click on it and check "Query description" in constant tab. in the general tab you need to assign a dataprovider, for that assign your query name in workbook settings (in Bex design toolbox). also check the "display caption" in general tab.
Pravender -
Need User Manual for Bex Analyser BI 7
Hi All
We have to prepare the user manual for Bex Analyser to show all the functions. If anyone has any link kindly let me know.
Thanks for your help
Regards
SathyaHI ,
See this link
http://help.sap.com/saphelp_nw70/helpdata/EN/ba/45583ca544eb51e10000000a114084/content.htm -
User-Exit for changing Sales Document Number - Urgent
Hi Experts ,
Please suggest me the <b>User Exit for changing Sales Document Number.</b>
thanks,
Jayesh<b></b>hi jayesh,
chech this exit-----EXIT_SAPFV45S_002.
this exit's description says " Change Sales Document Using Configuration".
Other available exits are
SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
Reward me if useful..........
Harimanjesh AN -
How to disable the user settings for the transparent container
Hi Experts,
I have an form designed using VC - model, which as a input field and button. When i compile and deploy every thing works fine. I get the form as the output.I am able to call this form in the portal and I am able to get the page.
Issue: When i right click on the fields in the form I get "User settings for the input field AA" and gives me an option to Hide the field. Which the users doesnot want.
I tried it on the VC runtime where i don't get the right click option.
So kindly help me out in resolving this issue.
Thanks
KetanHi Ketan,
If you have chosen the Rendering Client as WebDynpro HTML(by default it is set so) for the callable object, then you would invariably get the 'probelm' you're facing.
Instead you could set for the Object Definition -> Rendering Client as WebDnpro Flex in the Callable object (in Guided Procedures). Now you would not get that hide option.
But one simple question, why would the user want to right click on the field? Even if he hides the fields, he always has the option to make them visible again
Let me know if it's helpful
Regards,
Vani -
In Oracle 10g, what is the max number of values we can pass to 'IN' Clause
Hi,
In my SQL query i have a scenario like, i have to pass the values to 'IN' Clause dynamically from other application. I want to know what is the the max number of values i can pass to 'IN' Clause.
i have searched in many pages i seeing answers like 'may be 1000' , 'not sure'....
Could any one tell me the exact limit of IN Clause in 10g.
Thanks in Advance.
ChandranHi, Chandran,
Chandran M wrote:
In my SQL query i have a scenario like, i have to pass the values to 'IN' Clause dynamically from other application. I want to know what is the the max number of values i can pass to 'IN' Clause.
i have searched in many pages i seeing answers like 'may be 1000' , 'not sure'....Don't overlook [Dont want to know|http://forums.oracle.com/forums/thread.jspa?messageID=2683385�]. This may explain why people are reluctant to give a straight answer.
Could any one tell me the exact limit of IN Clause in 10g.1000 items such as IN (1, 2, 3, ..., 1000)
No limit on the number of sets: IN ((1), (2), (3), ...) *<=== NOT QUITE!* See below
No limit in sub-queries: IN (SELECT ...)
Edited by: Frank Kulash on Jun 3, 2009 9:43 AM
The limit of 1000 applies to sets of single items: (x) IN ((1), (2), (3), ...)
There is no limit if the sets contain two or more items: (x, 0) IN ((1,0), (2,0), (3,0), ...)
Thanks to Michaels for pointing this out.
Edited by: Frank Kulash on Jun 3, 2009 10:22 AM
Fixed link -
Here is a solution for BEX analyzer NW04S layout - setFilterStyle
Hi all,
I had a problem with a workbook that contains multiple sheet with differebts queries.
The problem was, that the filter panel had the same style on each sheet. And like the number of charactéristics are different for each quey, the layout was not well.
To correct this :
- I have modify the 'setFilterStyle' macro and now, the filter panel is displayed correctly on each sheet.
I hope this solution will be able to help you ...
Regards,
Martine
Here is the modified macro:
'--- Reformat the Filter Area with the correct stlyes
Sub setFilterStyle()
Dim i As Integer
Dim lRange As Range
Dim lsheet As Worksheet
On Error Resume Next
'i = 16
'Calculate Filter-Area
'While Sheet4.Cells(i, 3) <> ""
' i = i + 1
'Wend
'Filter Area
For Each lsheet In ThisWorkbook.Worksheets
i = 16
While lsheet.Cells(i, 3) <> ""
i = i + 1
Wend
If lsheet.Range("C14").Value = "Filter" Then
Set lRange = Range(lsheet.Cells(15, 3), lsheet.Cells(i - 1, 4))
lRange.ClearFormats
With lRange.Borders(xlEdgeBottom)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = 47
End With
With lRange.Borders(xlEdgeRight)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = 47
End With
With lRange.Borders(xlEdgeRight)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = 47
End With
With lRange.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = 47
End With
With lRange.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = 47
End With
With lRange.Borders(xlInsideVertical)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = 47
End With
lRange.Interior.ColorIndex = 2
End If
Next lsheet
' No more filter Area
For Each lsheet In ThisWorkbook.Worksheets
i = 16
While lsheet.Cells(i, 3) <> ""
i = i + 1
Wend
If lsheet.Range("C14").Value = "Filter" Then
'Calculate Filter-Area
l_old = i
While lsheet.Cells(l_old, 3) = "" And l_old <= 200
l_old = l_old + 1
Wend
Set lRange = Range(lsheet.Cells(i, 3), lsheet.Cells(l_old - 1, 4))
lRange.ClearFormats
End If
Next lsheet
End Sub
'--- Service Function to get the Name Object back
Private Function getName(i_name As String) As Name
Dim l_name As Name
For Each l_name In ThisWorkbook.Names
If l_name.Name = i_name Then
Set getName = l_name
End If
Next l_name
End FunctionHello,
You can set the default workbook as the SAP standard provided.
To do this, please open the BExAnalyzer and goto the
"Global settings" screen (Its on the BExAnalysis Toolbox menubar).
In the "Select Default workbook" tab click on the "Use SAP Standard"
button.
This would set the default workbook. Close Analyzer and reopen it.
It should work fine.
Some additional information for you:
The default workbook that is used can be seen in table RSRWBTEMPLATE.
Check the workbook that is assigned to your user. If there is a blank
workbook assigned to your user, this uses the SAP Standard Global
Wokrbook. If your user iD doesn't exist in this table, then it will use
the workbook assigned to the <blank> user id. If the <blank> user id is
assigned to <blank> workbook, this means that any user id that doesn't
have an entry in this table will be use the global workbook. Don't make
any manual updates to this table, but it can be used to see who is
assigned to what workbook. You should specify using the standard workbook
for your user id through the properties in the BEx Analyzer. Ensure that
the entry is updated in this table. Also, you will need to close BEx
Analyzer and log back on to see the change.
Regards,
Manjunath -
BEx Analyzer: Use Of Variable Values For Planning Sequence
Hi experts,
I want to start a planning sequence using a button item in a BEx Analyzer workbook. The planning sequence itself is defined with several variables, that are input ready. The same variables are used in BEx Queries that are bound to DataProviders in the workbook. Therefore the variables are filled by the user, if the workbook has been started. If the user wants to start the planning sequence, that is defined on the button item, the same variable values (which the user has already set in the beginning) should be used. But I didn't find a way to fill planning sequence variable from variables (like it is possible in the web interface using the DataBinding function). It seems, that it is only possible to set the variable with static values, that are defined in the button item. Am I erring in this point?
Anyone here who can help me regarding this issue?Eitan Ohayon wrote:
Why did you raise this question?,did you face any problem?
Hi Eitan,
The problem was, that the planning sequence worked fine in web but not in analyzer. The system told me in web, that several records had been read, created, changed and deleted. System messages in BEx Analyzer always indicated zero reads, creations, reads and deletions.
Using your idea to set breakpoint in the INIT_EXECUTION method gave me the information, that all variables are not set or set with initial values (like '0000' for fiscal year). This seems to be the reason for my problem. Now I've reduced the planning sequence definition on the button only to that variables, that are really needed. Furthermore I defined the Command Range to get dynamic values for the variables from the excel sheet grid. So it seems to work.
Thank you for your help! -
Find the User ID through which the end user logged in BEx Analyzer?
I want to fetch the end user USERID who is executing the query. I am the end user and want to view a report, so I will login into BEx Analyzer with my userid and start executing query. Is there any way I can find that ID, in any table, program, function module or some where........?
I don't want 'created by', 'last changed by'. I want ID through which end user is logging into in Analyzer.
Also if the end user is logging in through RSRT wanted to know the SAP login user ID through which the user logged in?Hi,
If you want to see the end user id that is running the query, and then open the workbook, select Layout from the menu u2013 Display Text elements. Click on All (or General, Filters or Variables based on your requirement). It will display the technical name, info provider, current user details. You can save it as existing work book transport to production, then when this query executed you can find end user login id.
May be you can check RSRWBTEMPLATE table for workbook users details. Mostly end user will not have access to RSRT.
Hope it helps you
Thanks
Riyez -
Can I have multiple user settings for one user?
In one user account I would like to save and access mutlipe users settings at the click of a button. Can this be done?
Hello Jake,
from the Appple menu you can change the location - the location describes your network settings, if you have wlan, ethernet, vpn etc, but unfortunately not the things you want to configure.
If you want to set up your desktops and your Dock with different working sets depending on your task, then you need to create different accounts, one for a new user "Jake The Writer" and one for a new user "Jake the Graphics Designer". This you can do from the "System Preferences" -> "Users and Groups". To add an account click the padlock in the lower left corner, then the "+" and define the user name etc.
If you click on "login options" you can set "show fast user switching". Then you can switch between your accounts from the main menu bar by clicking on the user icon in the upper right corner (right beside the spotlight searchfield).
For each new user you can set up the Dock and the items on the Desktop, when you login as that user.
However, seperate user accounts try to protect your data by sharing and permission settings. So you would not be able to access the data in your separate home folders when logged in from a different account. If you want to use these approach you should store your documents in the Shared folder and not in your home folder.
Best Regards
Léonie -
Execute button for BEx Analyzer in the Query Designer
Hello,
My current BEx Query Designer 7.1 and we are using Excel 2003. Currently, I can execute query through BEx Web but I am also looking for green check button of BEx Analyzer also. Could you please tell me how can I incorporate/add this BEx Analyzer check box in Query Designer so that I can execute query both in BEx Web as well as BEx Analyzer.
Thanks very much in advance.
Regards,
MdHello Hyma/Prasanna,
Thanks for your reply and it's solved my problem.
If I logon BEx Analyzer and open or changed query through it, I can see green check box in Query Designer. Now I can run query both in BEx Analyzer as well as BEx Web.
Regards,
Md -
User settings for Default plant in some transactions
Hi gurus,
is it possible to get a default plant in any transaction that you enter ...
e.x In any Tcode or tcode MD04, i want my relevant plant ,ie ABCD to appear by default always.Whta would be the user settings I need to do
Thnx in ADVANCE
HKRDear Hemanth,
for every t-code u have settings options in tool bar
next to that u have save option
give plant & save from that option
then check the result
Regards
kumar -
Different user settings for scrolling in tables or ALVs
Hi Experts,
I have a strange problem.
I have a Web Dynpro Application that uses the UI Element table. For one user who uses it the scrolling mode is a scrollbar and for an other user the scrolling mode is a paginator. That appears not only for this application. ALL applications on the system have this difference for users. So, not only in tables does that appear. In ALVs too!
Does anybody know where I can configure this for every single user?
Thanks a lot!
Best regards,
IngmarThe only thing I can figure is that the user getting the paginartor has accessibility turned on:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/19/e64941bfb4de2be10000000a1550b0/frameset.htm
That is the only option I know of that should override the system or application settings for scrolling. In particular accessibility can be turned on at the user profile level:
To do this, in transaction SU01 for your user name choose the tabstrip Parameters, insert the parameter ID ACCESSIBILITY_MODE with the value X, and save the entry.
Or within the portal:
To do this, in your user profile in the portal, under General Information select option Activate Accessibility (Screen Reader Required) and save your entries. This specification is evaluated by Web Dynpro ABAP.
Maybe you are looking for
-
How do you get your IPhone camera roll pictures onto your ITunes account?
How do I get photos taken on my IPhone (meaning my photos from my camera roll), onto my ITunes account. I already have my photos saved on my computer, but when I try to sync the photos onto my ITunes account, the photos only get added back to my IPho
-
My Macbook pro, a mid-2010 computer, new when I purchased it, keeps shutting off at random and restarts itself. I could be in the middle of typing and it just shuts off and restarts. I have unchecked the "automatic graphics switching" option in my
-
Sharepoint 2013 - Remove "Recent" from left menu
Hello All - My client has requested that she be able to remove (or hide) the "Recent" menu header from the left menu in Sharepoint 2013. This is for specified site collections/sites/pages, not farm-wide. So far, I've tried to do this via JQuery by ad
-
Add field TIDNR to list edit PM reports
Hi, We have a requirement to add field TIDNR (Technical Identification number) from ITOB table into several list edit PM reports (IW28/29/38/39/64 to 69) I have read sap note [586523|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnot
-
CS5 templates not updating unless "child" pages are open.
When I edit the template, the only way I can get Dreamweaver to update the pages is to open all the pages connected to the template. Any help would be appreciated.