User Status for process orders

Dear Experts,
We are using user statuses for process orders & with this we are resricting or allowing certain business transactions.
My question is can we automatically set the two consecutive user statuses ?
Means when the GR for process order is done i have set the user status as GR.
Next user status is CLSD.
So after completing the closing of process order by settlement transactions can i set the staus as CLSD automatic?
I am trying to do it but i am getting error as-
"Status CLSD is not allowed (ACT 30000292 0010)"
Your help is highly appriciated
Regards
Vivek

Hi,
1) Still your order is carrying cost, it has not settled properly
2) you can check in CO02 itself, Go to tool bar at top
3) here Go to > Costs > Analysis & check whether order is set to Zero
4) you can check in KKBC_ORD also
Also, pls refer below link
Re: HOW automatic order status change to CLSD
regards,
Sankaran

Similar Messages

Activation of User status for Prod. order

Hi,
I have created a status profile with a status as a user status for production order. Now the thing is how to activate this user status for a specific transaction.
the requirement is after settlement the user status should get activated for production order.
Regards
Amit Parkhi

Hi Amit,
As told by Ajay , after assigning Status Profile in OPJH you can assign User Status to production order as below:
Pls. go through the following procedure for activating the User Status :
Activating User Statuses
Use
You can activate a user status at order header and at operation level.
Procedure
Order Header Level
Go to the order header.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Operation Level
Go to the operation overview.
Select the operation in question.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Pls. follow the above procedure as per rquirement and set user status accodingly.
Pls. revert if any doubt and reward if useful.
Regards,
Tejas
Edited by: Tejas Pujara on Jun 23, 2008 8:10 AM
Edited by: Tejas Pujara on Jun 23, 2008 8:11 AM

User Status for PM Order

Hi everybody,
I have created a user status for PM orders. the problem is when Order status in CNF ( confirmed ) and I use IW45 to cancel confirmation, the user status doesn't change to Release and still remain CNF. I couldn't find any business transaction for that.
what do you do for such case?
thanks in advance

Hi Daniel,
I doubt that some communication gap is going on.
System Status
- An Order with status TECO CNF ... converts to REL CNF ... when the TECO cancels.
- This status further changes to REL PCNF when you cancel any Operation Confirmation (IW45).
- Similarly TECO PCNF also possible.
If I remember correctly, you were asking about User Status trigger upon change of System Status,
If you agree with the very 1st line of this post, you may start a fresh by explaining the requirements again, if possible more clearly. The probability for fresh thinking and responding from forum would increase.
Best wishes
Jogeswara Rao K

Set User-status for PP order

Hi All,
How can I set the user-status for a PP order, also let me know which user exit suits this requirement, as I know I have to make use of a FM or a BAPI which sets the user-status in the user-exit somewhere.
Thanks
Mark

Hi,
Try the following enhancements/exits for setting the status for PP order.
STATTEXT
CCOWB001
COIB0001
Regards,
Anji

Extracting User Status for Sales Orders

I am trying to extract user status transactional data for sales orders (at both the header and item level). I have been following SAP note 300300 to configure the status extractors and map the BW objects to sales order status data sources (2LIS_11_VASTH & 2LIS_11_VASTI). I think I have set up both R/3 and BW correctly according to note 300300 and the IMG documentation, but I am not getting any values in the info source for the new user status info objects, when I run the extract.
Has anyone successfully done this? If so, do you have any documentation or pointers on how I can get this to work? Or, am I better off creating a generic extractor? Thanks for your consideration.
Sincerely, Hashi Chakravarty

Hello Ravi,
well yes, I can derive the status for that order in the update rules if i show the status as an attribute of the 0pm_order; but basically there will be only the last status shown.
My problem:
a. i report on day 1, the status of the order is REL
b. on day 2 i load the master data for the orders, new status is TECO
c. on day three i want to report in the past and see the status of day 1; that's not possible in this scenario because i'll see the current status (TECO).
So that's why I want to have the statuses in the cube...
The 2lis_17_i3hdr extractor is only sensitive to CRT and TECO statuses, but not to the others (like REL / BLC and so on... :_(( )
I could read the statuses from the JEST and TJ02T tables...but still, if a document status is changed, no delta record is written in the queue...
Thanks,
Tudor

User status for production order

From which table i can get the USER STATUS for a production order?

Hi
Use the TableS:
JEST - Pass OBJNR of the Production ORDER (AUFK, AFKO tables)
or from
TJ02
TJ02T
reard if useful
regards,
Anji

User exit for process order

Hi experts,
I need user exit for a process order (COR1). While saving the process order batch number has to generate based on the production version.
I used the exit PPCO0007, but its not working. Is there any other exit available r not?
Can u tell me exit name at process order creation?
Naren

Thanks for your reply.
I maintained Production scheduling profile in workscheduling view. The number range i used in the user exit is not generating at the time of release. Is there any other user exit is available for process order.
Yesterday i got another problem. While releasing the process order it is giving a message as release rejected. I went to the log details. In that no batch could be determined message came. I deactivated the user exit and tried. The std number range also it is not taking. I went to goods receipt tab and click on the batch creation button. There also it is giving message as no batch could be determined. How to resolve it. I checked everything in material master and as well as settings. I didint get the solution.
Please help me.
Naren

User status for investment order to block settlement to final asset

Hi,
I try to set up a user status to avoid user to settle internal/ investment order to final asset. I cannot find a user status that will let me make the distinction between the automatic settlement to AuC and the partial or full settlement to final asset.
The process we are using is that we do automatic settlement from investment order to AuC on a weekly basis and as soon as the final asset has been entered via KOB5 (distribution of line item) we would like to setlle it.
Do you know a way to set up a user status on an internal order to allow settlement to Asset under construction but not to final asset?
Thanks
Sabine

Hi,
I do not want to send the costs directly to final asset. Costs booked against the investment order should always first go to AuC and then to final asset. What we try to avoid is to have the 2 settlements immediately one after the other. We would like to have the settlement to AuC on a weekly basis and the other one only when capitalization is required. But if the final asset is already entered in the settlement rule of the order via KOB5, then there is a risk to settle to final asset. We would like to only run the second type of settlement only when the asset is ready to be capitalized. To be able to do that we thought about using the user status. For example, if status is "release", we could settle to Auc but not to final asset and if status is "approved", we could settle to final asset.
Do you see what I mean? I need a status that allows me to perform some transactions and another one that allows me some other business transactions. The problem is that the 2 settlements I am talking about are not recognized as business transaction but as processing type.
Any ideas?
Thanks
Sabine
Edited by: Sabine Janssen on Oct 14, 2009 10:46 AM

PPRT (part printed) System Status for process order

Hi All,
Please help to explain when we get PPRT (Part Printed) and PRT (Printed) System Status on a process order. We are using 4.6 system.
We are printing the shop floor using COPI t-code and system is assigning PRT status for most of the orders. But for some of the orders when it is "Reprint" after couple of time it getting "PPRT" system status.
SAP system still considers the orders with PPRT in the "Original Printout" scenario instead of considering it in "Reprint" scenario.
Please can anyone help to clarify when and why does it happen.
Regards,
Swapnil

Hi,
There are 28 OSS Notes available to address this problem.
Explore with reference to your SAP Version.
Regards,
Siva

Maintain User Status for Maintenance Order

Hi,
I want to maintain User Status along with System Status. For that i have created a user profile for Maintenance and can view and modifiy define user statuses on the Maintenance Order. I have define following three statuses.
- Created
- Released
- Completed
Initially "Created" status is set on the Maintenance Order but so far i am unable to configure system to automatically change the status into "Released" when the order released and change it to "Completed" when the order is tech completed.
In short, how to link business transactions with the User defined statuses?
Regards,
Shah

Hi,
Thanks Dhavan, it was really helpful..
My requirement was to have a report on Maintenance order in terms of only three statuses "Created" , "In progress" and "Completed" to have a Pie Chart view of maintenance orders. The problem i was facing was that System Status shows multiple statuses depending upon the sequence of the business transactions conducted on the maintenance order and ultimately it ends up creating serveral statuses depending upon the sequence of actions performed on the order. That is why i opted to go for User Defined Statuses. And i linked those statuses with my Business Transactions i.e. like whenever i Release the order it automatically sets my User Status to "In Progress" and now i can have the report as per my requirement.
Regards
Shah

User status for crm order in bw

Hello
There is a customized status profile in crm for sales orders.
I'm using extractor 0crm_order_i for loading orders into bw.
How can I get this user status in the data source through sbiw customization ?
Thanks,
Rita Arkin

If you want to extract additional fields, you need to extend the
corresponding extract structure and possibly the communication
structure, fill the field with the user exit EXIT_SAPLRSAP_001,
etc.
Also, you will find additional information about such enhancments in:
http://service.sap.com/bi
> Documentation
> Business Content Documentation
> Extracting Sales and Distribution Transaction Data - vers. 2
Chapter 7 of this document provides further information about the
enhancement of extract structures.
See transaction RSA5
Colin

User exit for process order & PO

Hello Team,
There is a requirement as follows:-
When a process order is created for a material that is valuation type managed, the valuation type entered (or automatically populated) requires verification against the valuation type in the procurement alternative.   If the valuation type does not agree with the valuation type in the procurement alternative, an error message should be given to the user "invalid valuation type".
When a purchase order is created for a material that is valuation type managed, and the batch is entered in the PO line item, the valuation type entered (or automatically populated) must be the same as the valuation type in the batch master.
We are currently on 4.7 version and would appreciate if anyone could suggest a BADI/User-Exit for these scenarios.
Regards
Ravi...

HI, Try this use r exits
      EXIT_SAPMM06E_013   *or*
      EXIT_SAPMM06E_012
regards,
koolspy.

User Exit at process order release or save

Dear experts,
Can any one help me which user exit will be useful at the time of process order release or save (t code COR1/COR2).
My requirement is to stop the process order release if there is any maintenance order is already released on that date.
Process order should not get released in between the start and finish date of PM order for the same equipment.
I could acheive this for PM side by using a user exit IWO10002, here if any process order is released for an equipment PM order cannot be released for the same equipment in between start n finish date of the process order.
Please help me out in finding the user exit for process order release / save.
Thanks in advence,
Regards,
Praveen.

Hi,
The following enhancements are available for process order management:
For order maintenance:
o   PPCO0006 to predefine entries for order header fields when creating
    an order
o   PPCO0001 to provide information at the time of saving (for
    production orders and process orders)
o   PPCO0007 to check or change header data when saving
o   PPCO0002 to add additional checks that are to take place when
    setting the deletion flag or deletion indicator
o   PPCO0003 to prevent changes in sales order items that would cause
    changes in the process order for static assembly processing
o   STATTEXT to format the status line
o   PPCO0008 to check components that have been changed or added
o   PPCO0005 to change the storage location and the 'backflush'
    indicator in the reservation
o   PPCO0013 to change the priority of the selection criteria for batch
    determination in production orders or process orders
o   PPCO0014 to restrict the selection of process orders that are
    offered when creating external relationships
o   PPCO0020 to display additional information for another tab page in
    the process order header
Regards,
Dhaval

How to get system status and user status of service order

Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh Bathla

Hi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu

Order type dependent parameters for process order

Hello friends,
In Order type dependent parameters for process order (T.C COR4), there is subscreen for Process data documentation.Inside it we have three options :a) Batch Record Required
b) Order Record Required
c) No Process Data Documentation Reqd.
Through F1 help whatever information i have got regarding them, is not cleared.
According to it, if i select Order Record Reqd, than first of all i will have to delete (archieve) the order record than only i can delete (archieve) the process order.The same is with Batch Record Required.
So according to it if i want to delete the process order than first i will have to delete order record.So guys may i know which order record firstly i have to delete?Than only the system status for process order will not have the status ORRQ (Order Record Reqd).
And one more thing friends,if i select the third option No Process Data Documentation Reqd than which process data documentation system will not create?Or what will happen if i select this third option?
Thankingy you guys in advance.

HI
For process data documentaion pls check the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/89/a43ea8461e11d182b50000e829fbfe/frameset.htm
Thanks

User Status for process orders

Similar Messages

Maybe you are looking for