User status for production order

From which table i can get the USER STATUS for a production order?

Hi
Use the TableS:
JEST - Pass OBJNR of the Production ORDER (AUFK, AFKO tables)
or from
TJ02
TJ02T
reard if useful
regards,
Anji

Similar Messages

Activation of User status for Prod. order

Hi,
I have created a status profile with a status as a user status for production order. Now the thing is how to activate this user status for a specific transaction.
the requirement is after settlement the user status should get activated for production order.
Regards
Amit Parkhi

Hi Amit,
As told by Ajay , after assigning Status Profile in OPJH you can assign User Status to production order as below:
Pls. go through the following procedure for activating the User Status :
Activating User Statuses
Use
You can activate a user status at order header and at operation level.
Procedure
Order Header Level
Go to the order header.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Operation Level
Go to the operation overview.
Select the operation in question.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Pls. follow the above procedure as per rquirement and set user status accodingly.
Pls. revert if any doubt and reward if useful.
Regards,
Tejas
Edited by: Tejas Pujara on Jun 23, 2008 8:10 AM
Edited by: Tejas Pujara on Jun 23, 2008 8:11 AM

User exit for Production Order status

Hi all ,
Pl tell me about the : user exit for Production Order status
( i want CLSD status after settlement of the Production order .)
regards,

Hi,
for production order you have exits PPCO0001 - PPCO0023. In transaction SMOD you can see the documentation for all this exits. Actually I think exit PPCO0007 could be a possiblity for you. This exit is called by saving the order.
But maybe it would be better for you to use a special status profile? A user status is set if settlement status is set.
Also BADI WORKORDER_UPDATE could be interessting for you.
Regards,
Sabine

How to find system status for production orders?

How to find system status for production orders?
looked into table AUFK, AFKO and AFVC but none of these tables, carry
system status as part of the fields(STTXT)
I tried to filter in COOIS, but not much help
Able to find system status information in COHV,Is there any other way where
I can find system status information for production orders
Kindly guide

Hi,
Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
But, it is very difficult to combine the details like Order and System status.
Take the help of your ABAPer to generate Report for you.
Regards,
Siva

User Status for process orders

Dear Experts,
We are using user statuses for process orders & with this we are resricting or allowing certain business transactions.
My question is can we automatically set the two consecutive user statuses ?
Means when the GR for process order is done i have set the user status as GR.
Next user status is CLSD.
So after completing the closing of process order by settlement transactions can i set the staus as CLSD automatic?
I am trying to do it but i am getting error as-
"Status CLSD is not allowed (ACT 30000292 0010)"
Your help is highly appriciated
Regards
Vivek

Hi,
1) Still your order is carrying cost, it has not settled properly
2) you can check in CO02 itself, Go to tool bar at top
3) here Go to > Costs > Analysis & check whether order is set to Zero
4) you can check in KKBC_ORD also
Also, pls refer below link
Re: HOW automatic order status change to CLSD
regards,
Sankaran

User Status for PM Order

Hi everybody,
I have created a user status for PM orders. the problem is when Order status in CNF ( confirmed ) and I use IW45 to cancel confirmation, the user status doesn't change to Release and still remain CNF. I couldn't find any business transaction for that.
what do you do for such case?
thanks in advance

Hi Daniel,
I doubt that some communication gap is going on.
System Status
- An Order with status TECO CNF ... converts to REL CNF ... when the TECO cancels.
- This status further changes to REL PCNF when you cancel any Operation Confirmation (IW45).
- Similarly TECO PCNF also possible.
If I remember correctly, you were asking about User Status trigger upon change of System Status,
If you agree with the very 1st line of this post, you may start a fresh by explaining the requirements again, if possible more clearly. The probability for fresh thinking and responding from forum would increase.
Best wishes
Jogeswara Rao K

User Exit For production Order Information System

Dear All,
I am looking for an User Exit,BADi's for production order Information System where i can see the Quantity which is already produced & The Quantity which is already passed from Quality.I mean the GR Quantity against the Production Order and against that Quantity how much is passed from the Quality.
This is an Urgent Requirement from The Customer.
Please Help.
Thanks
Sujay Joshi

Dear
You use QA33 report with following fields,,,,here you will get all required
Inspection lot
Material
Plant
Insp. lot quantity
Base unit of measure
System status
Order
Unrestrictd-use stck
Scrap quantity
Sample
Blocked stock
Reserves
New material
MatTransfer posting
Posted to batch
Return to vendor
Other quantity
Other quantity 2
Quantity to be posted
Long-term sample qty
Inspected quantity
Destroyed quantity
Actual lot quantity
Defect. qty in IQty

User exit for Production Order release

Hi Experts,
Any User eixt for Prouction Order Mass processing.
Before releasing the production order i have to do some checks. Can you please provide right user exit. More reward points with best solutions.
Thanks
Cris

Hi,
check the following userexits and BADI's for Production Order
Enhancement/ Business Add-in Description
Enhancement
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determinati
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
PPCO0009 Enhancement in goods movements for prod. process order
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
Business Add-in
AFABD_CHANGE Change Relationship
CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection
PPPI_SEL_ORD_EXT_REL
SIDAT_UPDATE Change date of price simulation
Regards

User exit for production order settlement

Hi Experts,
Can anybody tell me if there is any user exit which will make GR and settlement of Production Orders at the same time i. e. as soon as production order is confirmed ( movement type 101 happens) the same production order will be settlelled immediately.............
Thanks on advance for your answer.
Regards,
Bijay

Hi,
for production order you have exits PPCO0001 - PPCO0023. In transaction SMOD you can see the documentation for all this exits. Actually I think exit PPCO0007 could be a possiblity for you. This exit is called by saving the order.
But maybe it would be better for you to use a special status profile? A user status is set if settlement status is set.
Also BADI WORKORDER_UPDATE could be interessting for you.
Regards,
Sabine

Set User-status for PP order

Hi All,
How can I set the user-status for a PP order, also let me know which user exit suits this requirement, as I know I have to make use of a FM or a BAPI which sets the user-status in the user-exit somewhere.
Thanks
Mark

Hi,
Try the following enhancements/exits for setting the status for PP order.
STATTEXT
CCOWB001
COIB0001
Regards,
Anji

User exits for production order

Hello,
Hope all had good weekend. I need some help and would appreciate if someone can guide me here.
I have a requirement where I need to develop an enhancement point for production orders transaction CO02.
The enhancement will check the user's authorization profile. Based on authorization profile, enhancement point will decide and direct 'CO02-Change production Order' OR 'ZCO02 - restricted production orders'.
Here are few question I have related.
1. What user exit I should use for this above requirement ? This should be triggered whenever CO02 is being called either from SAP easy access menu or from a different transaction.
2. How can I check/read users authorization profile within this user exit/enhancement point ?
3. Based on the profile, how do I direct to CO02 or ZCO02 ?
Will highly appreciate if someone could please share their knowledge on this.
Thanks,
JMC

Hi J,
can u tell me whats there in ZCO02 - restricted production orders', have u seen SHD0 -->creating screen/transaction variants ?
Disabling tabs in SHD0
Regards
Prabhu

Extracting User Status for Sales Orders

I am trying to extract user status transactional data for sales orders (at both the header and item level). I have been following SAP note 300300 to configure the status extractors and map the BW objects to sales order status data sources (2LIS_11_VASTH & 2LIS_11_VASTI). I think I have set up both R/3 and BW correctly according to note 300300 and the IMG documentation, but I am not getting any values in the info source for the new user status info objects, when I run the extract.
Has anyone successfully done this? If so, do you have any documentation or pointers on how I can get this to work? Or, am I better off creating a generic extractor? Thanks for your consideration.
Sincerely, Hashi Chakravarty

Hello Ravi,
well yes, I can derive the status for that order in the update rules if i show the status as an attribute of the 0pm_order; but basically there will be only the last status shown.
My problem:
a. i report on day 1, the status of the order is REL
b. on day 2 i load the master data for the orders, new status is TECO
c. on day three i want to report in the past and see the status of day 1; that's not possible in this scenario because i'll see the current status (TECO).
So that's why I want to have the statuses in the cube...
The 2lis_17_i3hdr extractor is only sensitive to CRT and TECO statuses, but not to the others (like REL / BLC and so on... :_(( )
I could read the statuses from the JEST and TJ02T tables...but still, if a document status is changed, no delta record is written in the queue...
Thanks,
Tudor

User exit for Production Order

Hi Gurus,
What user exits are there for Production Order?
Can anyone throw light.
Thanks in advance,
Srini

Dear ,
User Exit in SAP PP-Production Order
PPCO0001 |Application development: PP orders |
PPCO0002
Check exit for setting delete mark / deletion indicator
PPCO0003
Check exit for order changes from sales order
PPCO0004
Sort and processing exit: Mass processing orders
PPCO0005
Storage location/backflushing when order is created
PPCO0006
Enhancement to specify defaults for fields in order header
PPCO0007
Exit when saving production order
PPCO0008
Enhancement in the adding and changing of components
PPCO0009
Enhancement in goods movements for prod. process order
PPCO0010
Enhancement in make-to-order production - Unit of measure
PPCO0012
Production Order: Display/Change Order Header Data
PPCO0013
Change priorities of selection crit. for batch determination
PPCO0014
Select process orders for external relationships
PPCO0015
Additional check for document links from BOMs
PPCO0016
Additional check for document links from master data
PPCO0017
Additional check for online processing of document links
PPCO0018
Check for changes to production order header
PPCO0019
Checks for changes to order operations
PPCO0020
Process order: Display/change order header data
PPCO0021
Release Control for Automatic Batch Determination
PPCO0022
Determination of Production Memo
| PPCO0023 |Checks Changes to Order Components
Regards
JH

User Exit For Production Order Confirmation Using CO15 or COGI

Hi all,
I need user exit for the production order confirmation so that i can set
AFPO-ELIKZ and AUFM-ELIKZ (delivery completedu2019 status flag) to Blank......
Thanks

hi,
check these exits.
CONFPP01                                PP order conf.: Determine customer specific default values
CONFPP02                                PP order conf.: Customer specific input checks 1
CONFPP03                                PP order conf.: Cust. specific check after op. selection
CONFPP04                                PP order conf.: Customer specific input checks 2
CONFPP05                                PP order conf.: Customer specific enhancements when saving
CONFPP06                                PP Order Confirmations: Actual Data Transfer
CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01                                PS confirmation: Determine customer specific default values
CONFPS02                                PS confirmation: Customer specific input checks 1
CONFPS03                                PS confirmation: Customer specific check after op. selection
CONFPS04                                PS confirmation: Customer specific input checks 2
CONFPS05                                PS confirmation: Customer specific enhancements when saving
CONF0001                                Enhancements in order confirmation
CONFPI01                                Process order conf.: Calculate cust.specific default values
CONFPI02                                Process order confirmation: Customer spec. input checks 1
CONFPI03                                Process order conf.: Cust. spec. check after op. selection
CONFPI04                                Process order conf.: Customer specific input checks 2
CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
CONFPI06                                Process order confirmation: Actual data transfer
CONFPM01                                PM/SM order conf.: Determine cust. specific default values
CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04                                PM/SM order conf.: Customer specific input check 2
CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving
use the exit which contains both structures AFPO,AUFM.

User status for investment order to block settlement to final asset

Hi,
I try to set up a user status to avoid user to settle internal/ investment order to final asset. I cannot find a user status that will let me make the distinction between the automatic settlement to AuC and the partial or full settlement to final asset.
The process we are using is that we do automatic settlement from investment order to AuC on a weekly basis and as soon as the final asset has been entered via KOB5 (distribution of line item) we would like to setlle it.
Do you know a way to set up a user status on an internal order to allow settlement to Asset under construction but not to final asset?
Thanks
Sabine

Hi,
I do not want to send the costs directly to final asset. Costs booked against the investment order should always first go to AuC and then to final asset. What we try to avoid is to have the 2 settlements immediately one after the other. We would like to have the settlement to AuC on a weekly basis and the other one only when capitalization is required. But if the final asset is already entered in the settlement rule of the order via KOB5, then there is a risk to settle to final asset. We would like to only run the second type of settlement only when the asset is ready to be capitalized. To be able to do that we thought about using the user status. For example, if status is "release", we could settle to Auc but not to final asset and if status is "approved", we could settle to final asset.
Do you see what I mean? I need a status that allows me to perform some transactions and another one that allows me some other business transactions. The problem is that the 2 settlements I am talking about are not recognized as business transaction but as processing type.
Any ideas?
Thanks
Sabine
Edited by: Sabine Janssen on Oct 14, 2009 10:46 AM

User status for production order

Similar Messages

Maybe you are looking for