Users keep moving network folders

Is there a way that I can prevent users from deleting/moving network folders for instance
\\SBSServer\SharedFolderFolder A. They need read/write access but a lot of times they will drag 'Folder a' into 'folder b' so no one can find 'folder a' anymore.
Thanks in advance!

Hi markolt4,
Based on your description, I understand that you want to restrict users to moving share folders. Please refer
to the following similar thread and check if can help you to achieve this target.
Need
to restrict the ability for a user to move or delete common folder
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Folders keep moving to System volume folder which is hidden

Dear All,
I am experiencing crisis in the infrastructure
I had virus infection and I had recovered from it "not completely" - the problem is folders keeps moving to hidden System volume folder
I tried working with security essential and it found that I have myfiles.exe infection
I blocked all executable files from the system - re installed new OS
I still get this problem that folders moved to system volume folder
from event viewer - after blocking exe files
user UUUUUUU attempted to save D:\xxx.exe on D:\ on server SSSSS This file matches the "Executable Files" file group which is not permitted on the system.
the xxx.exe name is the name of folder which then moved to system volume folder trying to put exe file on its place
please advice for urgent remediation

Hi,
Is the “myfiles.exe” virus deleted, when you perform a virus scanning on the server? Please boot your server in Clean Mode to see if the issue still exists.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Network folders for "other" user

I have managed to set up a lab of iMacs (new) bound to AD via Windows Server. I had users make shortcuts to their 3 main network folders. Works fine. Users can't always get to "their" workstations though so I'd like to set up the "other" user to load those same three network folders on log in, or at least make it easy for them to do it once logged in. As is, the server shows up a finder window's left pane under "Shared" but they have to drill through the whole server to find their own folders.
I'm just a teacher here, though I've made WAY more progress then the IT bozos that get paid for this, they have deferred to me (thank goodness).
Any help much appreciated.

I followed the suggestion of plugging the EX2 directly into the Windows8 PC, and it didn't work, in-fact the internet stopped working, until I reverted the connection and let windows fix the problem. I did make a minor step with homegroups, as I felt there was no where to turn but to try to get homegroups working once again. It works, the homegroup sees the other computer, but every second, yes, every second, when you click on the homegroup icon in windows explorer, the window to the right changes from the name of the Windows 8 computer to immediately No other homegroups PC's are available right now, that happens every second, I can time it, it switches every 1-2 seconds between the name of the Windows 7 computer to the error I posted a few words back. Sharing anything drive on the EX2 so it can be accessed on Windows8, same as it always has been, I don't see the drive on Windows8. Mapping the drive on Windows7 works flawlessly, except, I have a few files that I know I didn't delete but are not showing up, and I have transcoded folders ? As well I can't share any folder on the EX2 because it's listed under the user nobody and it's restricted to that users control for which I don't have a password for ?

Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD, they won't let me change the permissions and I keep getting errors that say the permissions should be 0 and are 501 and having files i can't delete that

Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD, they won't let me change the permissions and I keep getting errors that say the permissions should be 0 and are 501 and having files i can't delete that go on and on ad infinitum... I think it's a virus or a corruption? Can anyone tell me or help me and let me know what I'm dealing with here or wether I'm mistaken and should leave it alone?
I'd appreciate it.
Thanks,
Matt

mattmakesvidiots wrote:
Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD
Why do you want to delete those? What have you done so far to do that?
I doubt that Mac has a virus. On the other hand, your attempts to deleted those folders may have caused corruption.
Two other comments:
1) Is there a reason that Mac hasn't been updated to OS X 10.5.8?
2) You've been misled by the poor field labeling on this Web site into trying to type your entire post into the "subject" field. In the future, just put a short summary of your post into that field.

Maping users network folders to a MAC OS X

I have a number of domain users who need to get there individual network folder mapped to there profile when they log onto the domain from various MAC in the building.
We use a batch file that maps the users network home folder to there profile when they log onto a PC.
Does anyone know how to do the same process for those same users loggin onto a MAC OS X leopard machine.
Users network folders are stored on a Apple Xserve. Authentication comes first from Windows Server 2003 Active Directory.
(at the moment MAC users accounts are loaded entirely from the Apple Xserve, resulting in the user constantly writing to there profile across the network.
What I would like to do instead is to 'force the local home directory on startup disk', this is an option in directory utility on each mac. This will force the profile to load locally. Then using some sort of script or batch file map the users network home folder to the desktop of the MAC. Therefore reducing traffic across the network as the user profile will be loaded loally and will only be saving to there netowrk folder)
Does this make sense, and advice appreciated...???

I think you need to ask the folks in the Server forum or the Windows Compatibility forum. You might get more luck if you post it there. Someone who has done such a thing might stumble across it here, but you'd definitely find the folks who would know over there.

I keep getting network error on Facebook on my iPad

My Facebook was working fine on my Wi Fi but in the last week I keep getting network error when trying to logon to Facebook from my iPad & iphone 5s. I have time warner road runner digital cable. How do I fix it?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Finder problems using network folders

I am using NFS in my setup with an iBook and a PowerMac G5 both using NFS to network to a Linux fileserver. I am having some unusual problems with the Finder. Specifically, when I try to copy files from a local to a mounted NFS folder using the Finder, it can cause the system to hang. Moreover, even when copying a file within an NFS folder to the same folder under a different file name and then deleting the copy, the Finder display often goes crazy sometimes refusing to display any files in the folder or even worse, scrambling the file and/or subfolder names in that NFS folder. The problem seems to be entirely in Finder because when I look at the same folder in Terminal, everything works fine -- there is no underlying NFS problem.
The problem is even more acute when I use the NFS union mount option. What I want to do in my iBook is to union mount a network users diretory on top of /Users -- this way, both local and network users will have their directories available to them in the same place. Union mounts drive the Finder crazy and this can be readily checked. The mount seems to work fine, and the finder displays the union-ed directory fine. However, when you try to look at any of the folders in the directory, I basically get a system folder that is not even in the same directory tree sometimes, and at others, random network folders. Again, when looking at things in Terminal everything seems to work fine.
What is wrong with Finder and NFS? How on earth can Finder have problems displaying a directory structure? I keep having other problems when using GUI based programs with NFS volumes -- random failures seem all too common while the Terminal seems to work fine each time. Is the Apple implementation of NFS hopelessly broken? Or is it just the Finder that has problems. Either way, I am surprised and concerned that a mounted network directory exhibits seemingly random behavior in a GUI. Any help on these issues would be much appreciated.
Power Mac G5 2.0Ghz Mac OS X (10.4.6)
Power Mac G5 2.0Ghz Mac OS X (10.4.6)

Seems to be new behavior that if you delete a directory you are currently in it jumps back to the root instead of a directory above or after the deleted one. Just press the back button and you will be back in the directory.

Windows Server 2008 - password protect network folders

I was tasked to password protect a few folders that are being shared in the network. The folders are stored in the server (that i have admin access) and anyone in the network have full access to the folders and the files inside those folders. The computers linked in the network have different OS - 3 running vista, 2 running xp and 1 windows server 2008. Anybody in the office can use the computers without being prompted for a password (except the server) and the folders are accessible through any of those computers.
The following are my questions:
1. Is it possible to password protect folders shared in the network? If so, if someone wants to access those password protected folder through any of the computers connected to the network, will they be prompted to enter a password to be able to access it or the system will just say "access denied?" If so, please give detailed instructions on how to do it.
2. If it is possible to password protect network folders, is it possible to put different passwords on each folders? If so please give detailed instructions on how to do it.
3. If it is not possible to do any of the mentioned above through windows, is it possible with the use of a third-party software? If so, what are those third party software?

Hi All, First time on this forum and am finding it very interesting (sorry about the proposed as answer above.. hit the wrong key).
I found this topic particularly interesting and am looking to do a similar thing but seemed to have gotten around it quite easily (if I am on the same lines as greggync777 that is).
My problem is this I have a Home Theatre Network set up in my lounge to several locations around the house with around 8 gb of videos/music/pics etc, all works fine on connected pc's with WMC (all using Windows 7) and all is shared by family for entertainment.
I also have a Seperate workstation where I do my work (video editing) which involves storing considerable amounts of footage and more importantly all the work files/folders all of which is confidential, at the moment is also on a seperate pc which also houses 8 hdd with around 6gb of ever growing video information.
My point is that both these PC's ( HTPC and my WORKSTATION) are a bit too noisy despite having installed the best I can afford fans/Samsung eco green hdd's. My desire is to build a main super server running WHS 2008 (The size/Cooling/Noise etc is not a problem due to where it will be located). My main concern is Security with so many in the family having direct access to the Server so I want to restrict which files/folders they can subsequently access once there. I want to be the only one to have access to my work from my PC and everyone else denied access. I have set up a test rig running WHS08 and have set up access with several PC's using passwords for the server etc which was straightforward after creating a user account for them on whs08, therein laid the problem of then how to keep them from accessing my side of the server which is when I hit up on this thread after much searching. Following one of the suggestions above I went to the folder in question (in my case this will be a plus as all my work will be in one main folder with several thousand sub folders) to the security tab/permissions etc and firstly removed access to everyone except the server administrator. I then granted access only to one PC on the network - the one that is my workstation together with a password ( I meant to say upto this point everyone I had given access to the server could access my test folder), went back to my PC and was able to access as normal after entering the password. I then went to every other PC on the network (that has access to the Server) where I am pleased to say all denied me access to my folder. (my work pc by the way is running XPsp3). Not sure if it will work for Greggync777 or if it what he is looking to do but it did for me. I apologise also if I have rambled on a bit for my first thread.
tks Dave

Help - moved itunes folders to external drive and now my itunes is totally

A few months ago, in order to free up space on my c drive, i had to purchase an external drive - everything i installed via itunes since that date has been on the hard drive and everything was fine.
Last night i needed more room on my C drive so i stupidly moved the remaining itunes folders from my C drive to my F drive - unfortunately, when i opened itunes it was blank.
i've tried a few things - including adding the folder from the F drive - and that retrieved about 80% of my music/videos and the last playlists i had - however, they were all missing songs - even if all the songs that should be included remained on my itunes
i began the tedious process of manually adding files back in but soon realized this doesn't help itunes consider this the same ipod as what's still on my actual ipod.
*What I'd like to do (if possible) is to wipe itunes clean and somehow restore everything on my ipod into itunes so that i retrieve not only the songs and videos but also the playlists that i've spent way too much time building. At this point i fear that the various components to my ipod are in too many files on my external drive to be easily restored another way (though if i'm wrong please let me know)*
sadly (as this story might suggest) I am borderline computer illiterate - I've read a few posts suggesting some sort of software online (something the apple help line also made an "off the record" remark about) - but I can't for the life of me figure out which i would use or how to do this without risking the contents of my existing ipod (which has the playlists and songs/video I want to reestablish).
*Can anyone possibly suggest how to best handle this and walk me through it in painstakingly basic and specific detail? I would be forever grateful.*
Thanks

iTunes uses the iTunes Library files - in particular the iTunes Library.itl file - to keep track of where your song files are located as well as playlist and related information.
Most likely in moving your folders around iTunes has been confused to such an extent that it created a new Library file. With a bit of luck you might still be able to find the old file which would restore your old Library.
So the first thing you want to do is look around your computer and make a note of any iTunes Library.itl files you can find. Generally speaking you'll find them in the iTunes folders on your system and depending on how you've been moving the folders - i.e. whether you "cut" them or "copied" them - you may still find at least one one on your F: drive and some on your C: drive.
Having noted where they are you know want to check each of them out as described in this article in the Apple Knowledge Base. In following those instructions you want to select the Choose Library option and use the pop-up window that appears to zero in on the various .itl files you've located.
Remember that each Library file will show a different Library in iTunes - perhaps slightly different, perhaps completely different - and if the first one isn't what you're looking for you'll have to close iTunes and repeat the procedure by selecting one of the other .itl's.
Post back for any clarification.

How to set up Open Directory Users with local home folders?

Hi folks,
i set up a Mac mini Server with the services DNS, DHCP, AFP and OpenDirectory running. Everything is working fine so far but i want my OpenDirectory Users to have their home folders locally on the clients harddisk. My Leopard clients are already bound to the directory but everytime i try to login the login window is shaking even when i use the Directory Administrator account. What am i doing wrong?
Thanks.

(Did you read my other reply? You need to make it a portable account for the caching of login credentials.)
With network homes and portable account enabled on a machine you always run from the locally stored homefolder on that machine.
This homefolder syncs with the server network home folder for that account.
If either of these folders get corrupt or unintentionally altered files (permission problems) somehow, there is risk of losing files, syncing problems and more (can take long time to sync at login/out, during even without corruption - I prefer gigabit cable to WiFi for this for obvious reasons).
You at least need to monitor storage space in both places. You don't want either to fill up the disk (worse on server because several users can have their folders corrupted at the same time). Working quota settings / account is probably a good thing.
And you probably need to decide what is synced : all folders or just some (and when / how often).
You either do this form the server (you decide) or let the user have some say or a mix of these two.
You might want to leave out the user's personal files (music, movies and such) and also depending on emaIl client used, maybe not sync email if the client saves it like Entourage does it, in big ever changing database files. Might be better to just backup the mailserver if IMAP based.
If a user puts other large files in their homefolder (often on the Desktop) they can fill up the server fast. DVD-projects anyone?
Mixing different versions server/client might not work too good either.
So having said that, when syncing works it can be really good and you can restore a machine/account fast with pretty recent data. You can if in a hurry even log in from another machine using the account network home folder, getting access to the synced folders/files.
Using Time Machine it's a one way "sync" (more like "duplicate changed and new files" - which I like) and you have to manually set TM settings on the client for what is going to be backed up and when. I do atleast don't know how to do it from/on the server. This "less intervention by the server" can be a good thing but if your users don't "behave" you might want to be in the drivers seat "saving them from themselves".
TM backups can grow fast and probably demands more user interaction when storage space is used up.
As with all "backup" configurations you probably want some rotating media backup of both network homes and/or TM backups so you can do a restore. Of these two, network homes are the more important one to backup "further".

Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again.

Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again. What do I do so no need to keep having to move cursor?THE DOWNLOADING ICON STOPS MOVING UNLESS I KEEP MOVING THE CURSOR AROUND.

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Deployment issue - Login failed for user 'NT AUTHORITY\NETWORK SERVICE'

I am attempting to deploy a site from my development PC to my server. I have no issues running the site on the server using VS2010 Express Web in debug. All page queries are working within the debugger. The connection strings are identical between the PC
and Server, except the host name.
connectionString
="Data
Source=SOCIALSERVER;Initial Catalog=Intake_be;Integrated Security=True"
However, when using the site normally via IIS, the pages containing data access are failing with a permissions problem. The non-data access pages render normally.
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Looking at the SQL2005 instance via SQL Management Studio, I see security folder with Logins under the Server. NTA\NS is listed as a user login. But, I also see similar folders under each
of 3 databases. NTA\NS is not listed as a login specific to my target dB.
My site is for internal (intranet) use only. There is no internet access into my IIS. This is my first deployment into production. I think I only need Windows Authentication but I lack the experience to make a good decision. My goal is to allow domain users
to access pages that produce read only data. But, I also need controlled access to pages that can modify data. I used the native winform template for ASP.NET 4, which includes some roles based security.
How do I grant permissions for internal users on the pages that access SQL data? How does that security model work with the native roles based security? i.e.
add
name="AspNetSqlMembershipProvider"type="System.Web.Security.SqlMembershipProvider"connectionStringName="ApplicationServices"...
etc.
Thanks for your time and patience on this Deployment 101 type issue.
Kurt

hi,
You receive either of these error messages specifically when you use integrated security.
To resolve you can use one of below.
Method 1: Programmatically change the security context of the ASP.NET worker process to a user who has the correct SQL Server permissions.
Method 2: Change the default configuration of ASP.NET so that the ASP.NET worker process starts and runs under the context of a user who has the correct permissions in SQL Server.
Method 3: Grant the correct permissions in SQL Server so that the ASPNET account (or NetworkService account, for an application that runs on IIS 6.0) has the appropriate access to the required resources.(Go to the Computer Management >> Local User and
Groups >> Groups >> Right Click and go to properties on IIS_IUSRS >> Add appropriate user.
Thanx, Mark as answered if you are ok ..

User Access to Public Folders Disappearing (Outlook 2013)

I have one particular user who is losing access to public folders in Outlook 2013. I have found that going to
File > Account Settings > Account Settings > Email [TAB] > Repair... and then following through that dialog temporarily restores public folder access after restarting Outlook. However, once Outlook is restarted
for 30-60 seconds, the public folders disappear again. This is only happening for this one user. They receive their public folder permissions via group membership. Other group members report no such issue. I had another user with identical permissions
log into the same workstation and they again had no issue.
What could be causing this? This is a particularly bothersome problem since this user happens to be the office scheduler and the calendar they schedule on is public (which, thanks to reduced functionality in Exchange 2013, is no longer accessible in OWA).
Tech specs: Exchange 2013 CU5 accessed from Outlook 2013 running on Windows 8.1 Update. Outlook did not log any events during the time when public folders were dropped, nor are there any network connectivity issues being logged.
Any ideas for resolving this?

Hi,
Please check the connection status for Outlook.
Press the CTRL key and right-click the Outlook icon in the notification area, then select Connection Status.
Please run the command get-mailbox administrator | fl defaul* to check the default public folder mailbox for this affected user.
Do you have mail-enabled public folders? If you have mail-enabled public folders, you can check if this user can view public folders in OWA.
If possible, please re-add the public folder permissions for this user to check result.
Best regards,
Belinda Ma
TechNet Community Support

Wireless users keep dorpping out

Please help.
I have a WLC 5008 control 11 APs(H-reap) in defferent locations. At one office, users there constantly disconnected from wireless network, then re-connected automatically few seconds later. not just Apple products, PCs and laptops as well. Settings of that office are same as other locations, but seams wireless connection is very unstable there. it is an open space office, so signal receiving is actually very good everywhere in that office, but users keep dorppring out of wireless. where should I start looking?
One thing, there are 2 APs in that office, one is from AU, and one is from JP, so they are on different controll code. could that cause any problem? that office is in JP.
Thanks a lot.

This is too old version. You have to go for at least 7.4.121.0 which is a stable release.
Since you are running 6.x you cannot directly go to this version. You have to go for 7.0.x code first & then upgrde to 7.4.121.0. Here is the release notes for this code
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74mr02.html
Also make sure your WLC FUS upgraded to 1.7.0.0 as well. Refer below & this will take 30-40min outage to your wireless, keep that in mnd when doing.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/fus_rn_1_7_0_0.html
Refer this compatibility matrix to check all your AP/WLC/MSE/Prime compatibility depend on the prouducts you got in your environment
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
HTH
Rasika
**** Pls rate all useful responses ****

How to prevent users from creating new folders in share folder directory?

Hello guys
I'd like to know How to prevent users from creating new folders in share folder directory but still keep their power of creating new folders in their personal 'my folder'?
I tried changing the 'manage privilage ---- create folder' to deny certain user accounts, but by doing so, it also stops the user from creating new folders in their 'my folder', which is not good..
I also tried going into these share folders and tried different access types such as 'change/delete', 'read', 'traverse folder' etc, but none of it work ideally. The 'change/delete' access still allows them to create new folders, 'read' access prevents creating new folders but also take away their power of saving reports..
Any thoughts on how to take away their ability to ONLY create new folders in share folder areas without affecting their other privileges?
Please advise
Thank you

Easy, on the shared folders root folder only give them 'read' or 'traverse folder' but on the the folder inside the shared folders root folder give them 'change/delete'. That means they can change anything inside those folders but not create any folders at the shared folders root level.

Users keep moving network folders

Similar Messages

Maybe you are looking for