Users not able to submit the form
Hi All,
user's are submitting infopath form and getting an error "Form cannot be submitted", any troubleshooting ideas , I am new in infopath forms
Try to replicate it. Once you can do that try to submit the form just as the clock ticks over to a new minute.
Check the event logs on the servers
Check the ULS Logs
Check the event logs on the client PC
The reason to do this at a set time is to make it easier to check the specific time in the logs.
Similar Messages
-
Report exection problem for one user - not able to see the data.
Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,
-
Acrobat users not able to submit form
Hi
I have created a simple survey using Adobe Acrobat Pro. Distributed it, using the manual send option. The responses are collected in a response file which is located on a shared folder on our network.
It works perfectly for all uses that only have Adobe Reader installed. They fill out the form and use the submit button in the top of the screen. No problems at All!
However some few user including my self have the Acrobat or Acrobat Pro packaged installed and they do not get the "Submit" button but only "Highlight Fields"
My question is now - how do I make it possible for users with Adobe Acrobat or Acrobat Pro to submitting my form?
Best regards
HenrikHi
Thanks for your answer!
Yes they have the hand selected and it is possible to fill out the form, but the "Submit" button in the upper right corner is missing. -
I have a user who is unable to edit his time sheet in Adobe Reader XI. It worked fine in Adobe Reader 9.6. I recently upgraded his reader to version XI and he lost the ability to edit the fields. I re-imaged his machine and re-did his profile. He was able to edit his time sheet. A week later he's back to where he was. He was able to go to another machine with Adobe XI and edit his time sheet but he can't do it on his normal workstation. His time sheet shows the purple bar at the top telling him to fill out the form and that he can save data typed into the form. We're running XP SP3. How can I troubleshoot this?
My guess would be keyboard related. I'm guessing the field you're trying to fill has a keystroke event allowing only certain types of character. If the keyboard is faulty OR if the keyboard's layout (English, french, numLock, capLock) have been changed, allowed character could be someplace else.
I would first verify the presence of a particular format or a keystroke event in the format tab. I would then test my layout by typing charaters in another application such as notepad. Any chance the maximum character allowed would have mistaken be set to 0?
Also, I see you mentionned:
He was able to go to another machine with Adobe XI and edit his time sheet but he can't do it on his normal workstation
By Adobe, I'm guessing you mean Reader. Is it possible the default application on this other machine is Acrobat instead? If it is the case, the problem would probably be the way the file was created and maybe it would require to enable Extended features....... -
Hi
I have created a form which has one field called Target user of type Lookup.
From the property tab, I have added a property to the field. Property name is Lookup Query and Property value is "one of the select query".
Now when I preview the form, I get the right result but when I am trying to make this version as active version, It gives me following error: "Required property have not been set for the field: Target USer".
I believe I have already assigned property to Target User field by adding Lookup Query to that.
Am I missing something? Or my approach itself is not correct?
Any help would be appreciated.
Thanking You
Kiran ThakkarLookups require the following properties:
Lookup Query - SQL query, select usr.usr_first_name, usr.usr_last_name, usr_login from usr usr where usr.usr_login not like 'XEL%'
Column Names - name of the column(s) like usr_login or lkv_decoded. If you display multiple, no spaces in your value, like usr_last_name,usr_first_name,usr_login
Column Captions - displayed field name, Last Name, First Name, Login
Column Widths - i just always use 100 - 100,100,100
Lookup Column Name - this is what is returned when the item is selected. usr_login
This lookup will return all users who are not the three default users in oim.
-Kevin -
Not able to run the forms -OC4J Instance Error
Hi all,
We are facing a problem, like in our developement server we have installed Forms 10g, and configured the formsweb.cfg(we had set the working folder as D:\Source) and default.env and registry also.
While calling the form from the other machines/run the form from the forms builder itself, we are getting error like "RFB 003.008". The same error is coming while running the test form using the "Start->Programs->Oracle Developer Suit - >DevSuiteHome1->Forms Developer->Run a Form on the web" method also,
When we started the OC4J Instance, we got the following message:
"C:\Documents and Settings\anantgop.MTODOM01\Desktop>D:\ora\u01\oracle\v101\devsuite10g\jdk\bin\java -Doracle.security.jazn.config=D:\ora\u01\oracle\v101\devsuite10g\j2ee\DevSuite\config\jazn.xml -Doracle.home=D:\ora\u01\oracle\v101\devsuite10g -DORACLE_HOME=D:\ora\u01\oracle\v101\devsuite10g -jar D:\ora\u01\oracle\v101\devsuite10g\j2ee\home\oc4j.jar -userThreads -config D:\ora\u01\oracle\v101\devsuite10g\j2ee\DevSuite\config\server.xml
08/10/13 07:39:16 Error starting HTTP-Server: Address already in use: JVM_Bind
08/10/13 07:39:16 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized"
If you see the above message " Error starting HTTP-Server: Address already in use: JVM_Bind", is it causing the problem. can anybody help on this?.
Enviroment Details:
OS : Windows Server R3 version
Forms version is:
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, Oracle Label Security, OLAP and Data Mining Scoring Engine options
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production
Please help us to solve this issue. Waiting for your valuable reply.
thanks
renjishhi all,
I solved the issue.....
thanks
renjish -
User not able to send the mail from other mail box on outlook 2007
In my outlook(2007), i am using my mail box to send the mail and receiving the mail every thing working fine, now what happened , i am adding one of my users mail box to my outlook profile,and trying to send the mail from that mail box,when ever
i am trying to send its give me the message called message undelivered and permission error. as i am full permission on that users mail box. but still getting that issue.
My lab info
Exchange server 2010 sp3
outlook 2007HI Paul,
In exchange, you have something called Send as permission as well. Try to give send as permission to your self from the user's mailbox.
In exchange> Reciepient config> Mailboxes> user mailbox> right click> Full Send as permssion
or,
Add-ADPermission -Identity "user1" -User "[email protected]" -ExtendedRights Send-As
After you add your self in send as permission you need to wait for some time to propagate the settings or you can forcefully reset the information store services
That should solve your issue.
UMESH DEUJA MCP,MCTS,MCSA,CCNA -
11g forms builder is not able to initiate the Internet explorer
Hi,
my problem is that my forms builder is not able to open the form in IE during compilation if Internet explorer is not already running but it is able to open the form in a new tab if Internet explorer is already running.
My system's specifications :-
Oracle forms builder 11g
Windows 2008 SP2
Internet explorer version :-Internet explorer 9
Please help.
Thanks,
RS1. In the Builder verify that you have valid values for the Application Server URL and Browser Location fields in the Builder Preferences Runtime (tab). Do not leave either field blank.
2. In the browser settings, on the Advanced tab, scroll down to the Security section and check the box labeled, "Allow active content to run in files on My Computer".
3. Click Ok to save the changes. Close ALL open browsers
4. Retest -
Urgent:: Not able to open/lauch forms session
Hi All,
I had cloned our production instance to create a new instance.
But now I'm not able to open the form session. We are having apps 11.5.10.2.
The dbc file is perfect.. I even checked ICX parameters & related profile values.. seems to be ok..
I can login through /dev60cgi/f60cgi. But can not lauch forms from personal home page.
Can anyone plz suggect wht might be wrong?
Regards..
Edited by: user10200748 on Aug 30, 2008 10:25 PMHi Kali,
Thanks for the response.
I'm not getting any sort of error.. It just dont proceed after clicking the menus.. Even I try to check the error from java console, but even no errors are listed in it..
Moreover , I m getting successful AOLjtest run on the cloned instance.
The inputs I can give is -
The error_log shows -
[Sun Aug 31 07:19:54 2008] [error] [client 160.95.202.46] client denied by server configuration: /fh02/BON/oraapps/common/java/java
[Sun Aug 31 22:22:13 2008] [error] [client 160.95.202.46] client denied by server configuration: proxy:http://severname:8212/pls/BON/f
nd_icx_launch.launch
~
The access_log shows -
160.95.202.46 - - [31/Aug/2008:22:22:11 -0500] "GET /OA_HTML/RF.jsp?function_id=271&resp_id=20456&resp_appl_id=160&security_group_id=0&lang_code=US&oas=NvqKw
EsSQW1RppGR5XrWdw..&formsLink=yes HTTP/1.1" 302 376
lb57gpb1.ced.corp.cummins.com - - [31/Aug/2008:22:22:13 -0500] "GET /pls/BON/fnd_icx_launch.launch?resp_app=ALR&resp_key=ALERT_MANAGER&secgrp_key=STANDARD&s
tart_func=ALR_ALRALERT&other_params= HTTP/1.1" 403 240
~
Regards,
Edited by: user10200748 on Aug 31, 2008 8:36 PM -
User not able to run a report.
Report Server has encountered a SharePoint error. (rsSharePointError) Cannot open database "dbname" requested by the login. The login failed. Login failed for user . For more information about this error navigate to the report server on the local
server machine, or enable remote errorsHi Kunal, here are a few links that might point you in the right direction:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/cca6cb99-c86d-4ba6-b6b9-81ec88771aa8/users-not-able-to-see-the-published-reports?forum=sqlreportingservices
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/c6c1414c-c338-4222-a5ca-a554d3ad912c/problem-getting-some-users-to-be-able-to-run-reports-probably-security-of-some-sort?forum=sqlreportingservices
http://gj80blogtech.blogspot.com/2010/07/ssrs-error-report-server-has.html
http://support.microsoft.com/default.aspx?scid=kb;EN-US;2597014
cameron rautmann -
i have an agreement form created in word doc. i want to hire some one experience with formscentral to recreate the form and user be able to complete the agreement, sign it electronically (using echosign) then click submit. i will be alert of new response. can someone connect me to where i can talk to someone can provide this service. i have sample of agreement form
Hi c3 cyber club,
Unfortunately FormCentral and Echosign are two different services and forms created in Forms central can only be submitted via and to Forms Central.
We cannot have the form filled in using FormCentral and get it signed using Echosign.
However, you can use Echosign directly and you can get most of the functionality.
Thanks,
Vikrantt Singh -
i have an online menu - many of my customers pay by check, cash and credit card as well - is there not an option to show those options... and items vary in price, i need to be able to give them a total price calculation when they submit the form.
a) No, b)Yes. Firstly, the only payment gateway currently supported from FormsCentral is PayPal. If your customers complete the FormsCentral Form and order 6 of item 1 at one dollar each and 3 of item 2 at two dollars each, when they press 'Continue to Checkout' button, they are transferred to the PayPal Gateway - which will show the Total to Pay. That's no help for your folks wanting to pay by check. Think you may need another solution. Acrobat won't link directly to a Payment Gateway either, without you doing a bit of JavaScript etc.
-
I have a pdf registration form on my website. It has a link that take the user to a payment page within my website. They pay then submit the form. The link currently opens in the same browser tab as the form and the user thinks that is the submission, which it is not. I want my link to open into a new browser tab. How do I do that?
You can use the following JS code:
app.launchURL("http://www.example.com", true); -
User has contribute access but he is not able to access the site collection...
User has contribute access but he is not able to access the site collection...
What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us -
I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?
You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.
Maybe you are looking for
-
Reading and writing from a file
I am trying to read and write to a file so that I may store an array of string and a double in my application, but I have come upon a couple of problems; first when I put my file path into the path constant it will say that the file is not there ever
-
How Can I Send Data From One Pc To Another Using An Ethernet Connection ?
Hi, I would Like to know how to send data ( For example, any String ) from a Server Pc to a Client Pc, Using the same java program installed on both computers. [Pc One ( Server ) [ Java Program] ] <----Ethernet--Cable----> [Pc Two( Client ) [ Java Pr
-
I want to register with another Account into my Creative Cloud. When i download Creative Cloud, they always say that i must accept and verfiy my E-mail at my e-mail adress, but i have forgotten the whole password of my e-mail. So i created an new ado
-
How can i turn an iphoto slideshow into a book?
I am wondering how I can turn an iphoto slideshow into a book?
-
I am involved in new SEM-BPS implementation and I have to develop an interface program to read csv ( flat file ) from from a server into BW for reconciliation in BPS. I am new in BW, please can you tell me the best approach with examples if possible