Using 3 sets of NI9162+NI9263 with CVI

I am looking to use 3 sets of NI9162+NI9263 with CVI, outputing 12 analog lines. The example I find only has 1 line. Please help.
The example I look at is:
.....NI-DAQ\Examples\DAQmx ANSI C\Analog Out\Generate Voltage\Cont Gen Volt Wfm-Int Clk

I need help again. In the [ MultFreqContGen-IntClk.c ], this line does the configuration of the task:
DAQmxErrChk (Configure_ContGenPerWfmIntClk (chan, min, max, rate, &numChannels, &taskHandle) );
Inside the Configure_ContGenPerWfmIntClk() function, which is found in [ MultFreqContGen-IntClk_Fn.c ], this line gets the number of channels and writes that to the pointer numChannels:
DAQmxErrChk (DAQmxGetTaskAttribute (*taskHandle,DAQmx_Task_NumChans,numChannels) );
Is the number of channels not supposed to be determined outside and assigned to the child function? The parent function should have this number from all the user-input values. Why am I seeing the child function deciding the number of channels. I do not understand this.

Similar Messages

Can I create an apple id that my mother can use to download free books without using my personal apple id that I used when set her ipad up with originally?

Can I set up another user id that my mother can use to download free books without using my personal apple id that I used to set up her ipad with originally?

Other options:
Download the Amazon Kindle app and set your mother up with an Amazon account. Amazon has a lot of free ebooks.
Many public libraries allow you to check out audio and ebooks using the Overdrive app.

Has anyone been able to use a DataTranslations Frame grabber with CVI? I am trying to use a DT3152 in place of NI1408 frame grabber...

DT does not provide drivers for this hardware to interface to CVI or LabView. Has anyone had success?

you can find a LabVIEW driver at:
http://www.imagemill-tech.com/LvDrivers_.htm
"Blue" wrote in message
news:5065000000080000006F1D0000-986697009000@quiq.com...
> Has anyone been able to use a DataTranslations Frame grabber with CVI?
> I am trying to use a DT3152 in place of NI1408 frame grabber...
>
> DT does not provide drivers for this hardware to interface to CVI or
> LabView. Has anyone had success?

My ipad had been disabled,got it fixed,now its asking me to enter my apple. I used for icloud when i set up the Ipad.How do I do it to recover the apple id i used to set up my ipad at first?

My Ipad had been disabled,I got it fixed,now its telling me to enter the apple id I used to set up the Ipad with Icloud,How can I recover that apple id?

The following may help: https://iforgot.apple.com/appleid

Use VB Set keyword with Clone method?

I am using the TestStand API with Visual Basic 6.0 SP5. Is is necessary to use the Set keyword when calling the Clone method of a PropertyObject? i.e. which is correct:
Set thePropObj = existingPropObj.Clone("", 0)
or
thePropObj = existingPropObj.Clone("", 0)
Seems the Set keyword would be required, but I am
running into funny problems with this. I have a step
that I am trying to create a copy of. (The step contains a call to a LabVIEW VI.) If I omit the Set keyword, execution hangs at the call to Clone. If I include the Set keyword, all information present in the original PropertyObject doesn't seem to get copied to the new one. (Also, oddly enough, if I omit the set keyword, and the step calls a CVI function, everything seems to work
fine!)
Anyone have any advice?
Thanks in advance
D. LaFosse

Hello LaFosse,
You need to use the Set keyword before the clone method statement. However, I have a couple of comments about the code you sent.
This is the code you sent:
' Start up the testStand engine
Dim theTS As TS.Engine
Set theTS = New TS.Engine
' OK, load in the sequence file I
' created. This sequence file
' contains nothing more than a call
' to a VI in the main stepgroup of
' the MainSequence.
Dim seqFile As SequenceFile
Set seqFile =
theTS.GetSequenceFile()
' get a handle to the MainSequence
Dim seq As Sequence
Set seq = seqFile.GetSequenceByName
("MainSequence")
' Get a handle to the step that calls
' the VI, and a property object for
' the step
Dim theStep As Step
Set theStep =
seq.GetStep(0, StepGroup_Main)
Dim theStepProp As PropertyObject
Set theStepProp =
theStep.AsPropertyObject
' Create another step. We will attempt
' to use Clone to fill in the
' properties of this step.
Dim theOtherStep As Step
Dim theOtherStepProp As PropertyObject
Set theOtherStep = theTS.NewStep("",
TS.StepType_Action)
Set theOtherStepProp =
theOtherStep.AsPropertyObject
' Call clone...this step will hang.
theOtherStepProp =
theStepProp.Clone("", 0)
Basically the problem is that you are not loading the TypePallete after creating the engine. You shoud include right after the Set theTS = New TS.Engine:
theTS.LoadTypePaletteFiles
This should avoid the crash.
Some Additional comments:
1. With VB you don't need to create property objects from other objects. All the classes, except the Engine Class, inherit from the Property Object Class. The following Code does the same thing, but without creating propertyobjects directly:
Sub MySub()
'Variable Declaration
Dim theTS As TS.Engine
Dim seqFile As SequenceFile
Dim seq As Sequence
Dim theStep As Step
Dim theOtherStep As Step
'Create the Engine
Set theTS = New TS.Engine
'Load the Types
theTS.LoadTypePaletteFiles
'Get Sequence File
Set seqFile = theTS.GetSequenceFile()
'Get Sequence
Set seq = seqFile.GetSequenceByName("MainSequence")
'Get Step
Set theStep = seq.GetStep(0, StepGroup_Main)
'Clone the Step
Set theOtherStep = theStep.Clone("", 0)
'Using the inheritance functionality
'gets the Step Status
'Notice that theOtherStep is not a PropertyObject
'and you can use all the properties and methods that
'applies to the PropertyObject Class to a Step class
'in this example
'Also, in VB when you are typing the statement, you
'will not see the PropertyObject Class properties and
'and Methods automatically if the variable is not a
'PropertyObject type. However, you can still use them
'as mentioned before
MsgBox (theOtherStep.GetValString("Result.Status", 0))
End Sub
2. When you create or modify sequence files programatically be carefull not to break the license Agreement. You need the development lisence when modifying sequences.
3. This piece of code is not completed, and you will need to shutdown the engine by the end.
4. Since you are not handling UI Messages, you will need to be carefull when loading sequences that have the SequenceFileLoad Callback. The engine posts UI Messages when executing this callback. Also when you shutdown the engine, UI Messages are posted. For both operations (Load Sequence and Shuutdown) you may prevent the engine from posting the message (You may check the options parameter for this two methods in TS Programmer Help.)
5. If you want to run a sequence, again you will need to incorporate in your code the UIMessage Handler part. (You may check the TS Programmer Help->Writing an Application Using the API->UI Messages). Otherwise it may hang since the engine posts UI Messages eventually.
Regards,
Roberto Piacentini
National Instruments
Applications Engineer
www.ni.com/support

Hi! This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ip

Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!

Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!

Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID?

Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID? SO i could iMessage if out from my iPod to my iPad at home to be viewed by a family member?

Look into using Apple Configurator. It's the easiest way to "reimage" and Manage iPads that I know of right now.
http://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
Also, look into using the Educational Volume Purchase Program, if you have not already done so.
http://www.apple.com/education/volume-purchase-program/

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

Phone A = phone with information you want duplicated
Phone B = phone that you want to copy from A
Backup Phone A.
Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

Im having problems with my Kids facetime accounts that seem to be because they are both using my itunes and there are conflicts with multiple email addresses? Is it possible to now set the kids up with their own accounts without losing their apps etc

Hi All,
I have my kids using iTunes via thier ipods etc through my own account and this hase been the case for some time?
This has started to cause issues lately with imessaging and facetime, as there seems to be a limit on email addresses that can be associated with one account?
I wonder if I would be best off setting the kids up with their own accounts, but want to be able to do this without them losing their existing apps, music etc?
Is this possible, if so is there a simple process cos I can seem to find anything relating to this?
many thanks, Jim

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

I was using same id on 2 iphones with no problems suddenly everything got mess, how can i set a new id w.out losing my contacts?

i was using same id on 2 iphones with no problems suddenly everything got mess, how can i set a new id w.out losing my contacts?

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

HT5622 I have just received a new iphone 5s and need to set the Apple ID with my work email. I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use my work email as the Apple ID on my new iphone. What do I do

I have just received a new iphone 5s and need to set the Apple ID with my work email. I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use this email as the Apple ID on my new iphone. As it is a work phone I need to use this email address as my Apple ID. How do I do this?

when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email

I am trying to change my email address for an Apple ID and it is saying that it is already in use. I then sign in with that Apple ID and it says that the account is not set up yet, I don't want to set up the account, but I do want to use the email address

I am trying to change my email address for an Apple ID and it is saying that it is already in use. I then sign in with that Apple ID and it says that the account is not set up yet, I don't want to set up the account, but I do want to use the email address in my original Apple ID! HELP!

Welcome to the Apple community.
Once you have created a rescue address, you cannot delete it, nor can you change it to the same address as used by your ID. There are numerous providers you can get additional email addresses from, such as Hotmail, Yahoo, Google etc etc.

Isse with using Grouping Sets in SQL Server 2008 R2

Hi,
I created a query in SQL Server 2012 using grouping sets that works fine. When I try to use the same query in SQL Server 2008 I get an error ("Inccorrect syntax near SETS").
I researched using grouping sets in 2008 and didn't see any issue with my query. What is different in grouping sets 2008 vs 2012?
SELECT tl.ClientRegionCd as [Client Region Code] , tl.ClientRegionDesc as [Region Name], count(tl.CompleteICN) as [Trauma Letters Sent]
from TORT_Trauma_Letters tl
Where CONVERT(VARCHAR(26), tl.SecondNoticeSent, 23) between '2014-06-12' and '2014-06-12'
GROUP BY GROUPING SETS((tl.ClientRegionCd, tl.ClientRegionDesc), ())
Stacie

Check this blog post as how to deal with date ranges
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/10/16/bad-habits-to-kick-mishandling-date-range-queries.aspx
For your result you can simply achieve your result with UNION ALL, e.g.
select Client, Region, Letters
from myTable
UNION ALL
select NULL, NULL, SUM(letters) as Letters
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Using 3 sets of NI9162+NI9263 with CVI

Similar Messages

Maybe you are looking for